Download or read book Advances in Hard to Cut Materials written by Grzegorz M. Królczyk and published by MDPI. This book was released on 2020-03-13 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid growth of modern industry has resulted in a growing demand for construction materials with excellent operational properties. However, the improved features of these materials can significantly hinder their manufacture and, therefore, they can be defined as hard-to-cut. The main difficulties during the manufacturing/processing of hard-to-cut materials are attributed especially to their high hardness and abrasion resistance, high strength at room or elevated temperatures, increased thermal conductivity, as well as resistance to oxidation and corrosion. Nowadays, the group of hard-to-cut materials is extensive and still expanding, which is attributed to the development of a novel manufacturing techniques (e.g., additive technologies). Currently, the group of hard-to-cut materials mainly includes hardened and stainless steels, titanium, cobalt and nickel alloys, composites, ceramics, as well as the hard clads fabricated by additive techniques. This Special Issue, “Advances in Hard-to-Cut Materials: Manufacturing, Properties, Process Mechanics and Evaluation of Surface Integrity”, provides the collection of research papers regarding the various problems correlated with hard-to-cut materials. The analysis of these studies reveals the primary directions regarding the developments in manufacturing methods, characterization, and optimization of hard-to-cut materials.
Download or read book Advances in Hard to Cut Materials Manufacturing Properties Process Mechanics and Evaluation of Surface Integrity written by Szymon Wojciechowski and published by . This book was released on 2020 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid growth of modern industry has resulted in a growing demand for construction materials with excellent operational properties. However, the improved features of these materials can significantly hinder their manufacture and, therefore, they can be defined as hard-to-cut. The main difficulties during the manufacturing/processing of hard-to-cut materials are attributed especially to their high hardness and abrasion resistance, high strength at room or elevated temperatures, increased thermal conductivity, as well as resistance to oxidation and corrosion. Nowadays, the group of hard-to-cut materials is extensive and still expanding, which is attributed to the development of a novel manufacturing techniques (e.g., additive technologies). Currently, the group of hard-to-cut materials mainly includes hardened and stainless steels, titanium, cobalt and nickel alloys, composites, ceramics, as well as the hard clads fabricated by additive techniques. This Special Issue, “Advances in Hard-to-Cut Materials: Manufacturing, Properties, Process Mechanics and Evaluation of Surface Integrity”, provides the collection of research papers regarding the various problems correlated with hard-to-cut materials. The analysis of these studies reveals the primary directions regarding the developments in manufacturing methods, characterization, and optimization of hard-to-cut materials.
Download or read book Surface Integrity in Machining written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2010-01-10 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Surface Integrity in Machining" describes the fundamentals and recent advances in the study of surface integrity in machining processes. "Surface Integrity in Machining" gathers together research from international experts in the field. Topics covered include: the definition of surface integrity and its importance in functional performance; surface topography characterization and evaluation; microstructure modification and the mechanical properties of subsurface layers; residual stresses; surface integrity characterization methods; and surface integrity aspects in machining processes. A useful reference for researchers in tribology and materials, mechanical and materials engineers, and machining professionals, "Surface Integrity in Machining" can be also used as a textbook by advanced undergraduate and postgraduate students.
Download or read book Nanomaterials in Manufacturing Processes written by Dhiraj Sud and published by CRC Press. This book was released on 2022-08-02 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the manufacturing sector, nanomaterials offer promising outcomes for cost reduction in production, quality improvement, and minimization of environmental hazards. This book focuses on the application of nanomaterials across a wide range of manufacturing areas, including in paint and coatings, petroleum refining, textile and leather industries, electronics, energy storage devices, electrochemical sensors, as well as in industrial waste treatment. This book: Examines nanofluids and nanocoatings in manufacturing and their characterization. Discusses nanomaterial applications in fabricating lightweight structural components, oil refining, smart leather processing and textile industries, and the construction industry. Highlights the role of 3D printing in realizing the full potential of nanotechnology. Considers synthetic strategies with a focus on greener protocols for the fabrication of nanostructured materials with enhanced properties and better control, including these materials' characterization and significant properties for ensuring smart outputs. Offers a unique perspective on applications in industrial waste recycling and treatment, along with challenges in terms of safety, economics, and sustainability in industrial processes. This work is written for researchers and industry professionals across a variety of engineering disciplines, including materials, manufacturing, process, and industrial engineering.
Download or read book Sustainable Hard Machining written by Ashok Kumar Sahoo and published by CRC Press. This book was released on 2024-07-18 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Hard Machining: Implementation and Assessment analyzes the various methodologies of cooling and lubrication employed during hard machining operations, along with their potential contributions towards achieving sustainable machining. It includes the needs, challenges and trends towards sustainable hard machining of difficult-to-cut materials through the application of dry, minimum quantity lubrication (MQL), cryogenic and nanofluid assisted MQL for environmental, economic, ecological and societal benefits, leading to environmentally cleaner sustainable machining. Features: Provides an introduction to hard machining, sustainability and environmentally conscious machining Discusses dry and minimum quantity lubrication (MQL) based hard machining Includes computational methods and optimization in hard machining Reviews nano-cutting fluids in hard machining Explores cryogenic cooling in hard machining This book is aimed at graduate students and researchers in mechanical engineering, manufacturing and materials science.
Download or read book Handbook of Research on Manufacturing Process Modeling and Optimization Strategies written by Das, Raja and published by IGI Global. This book was released on 2017-03-10 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent improvements in business process strategies have allowed more opportunities to attain greater developmental performances. This has led to higher success in day-to-day production and overall competitive advantage. The Handbook of Research on Manufacturing Process Modeling and Optimization Strategies is a pivotal reference source for the latest research on the various manufacturing methodologies and highlights the best optimization approaches to achieve boosted process performance. Featuring extensive coverage on relevant areas such as genetic algorithms, fuzzy set theory, and soft computing techniques, this publication is an ideal resource for researchers, practitioners, academicians, designers, manufacturing engineers, and institutions involved in design and manufacturing projects.
Download or read book Materials for Advanced Heat Transfer Systems written by S. J. Vijay and published by Woodhead Publishing. This book was released on 2022-11-26 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Advanced Heat Transfer Systems presents the latest research and technologies developed for high-performance materials in heat transfer and cooling. The book compiles sought after research academics and industry experts need to adopt to solve common problems in critical areas of heat transfer and cooling to help advance the field further. A variety of methodologies are included to synthesize the material used, along with the correct procedures to follow to ensure appropriate and effective use. Various case studies are presented to help the reader further understand the benefits and challenges of the materials discussed. Researchers, academics, students and engineers working on heat transfer systems will benefit from this interdisciplinary and applications-focused reference and be guided through various methodologies to make informed decisions based on the latest research and technologies available. Presents current and futuristic materials that are being synthesized or used for improving heat transfer mechanisms of a system Applies the technologies, models and methods to a variety of applications, including power generation, aerospace, electronics and automobiles Includes recent case studies which exemplify the concepts and technologies analyzed
Download or read book Thermal Machining Processes written by Society of Manufacturing Engineers and published by . This book was released on 1979 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Mechanical Engineering written by J. Paulo Davim and published by Springer. This book was released on 2018-04-28 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook fosters information exchange and discussion on all aspects of introductory matters of modern mechanical engineering from a number of perspectives including: mechanical engineering as a profession, materials and manufacturing processes, machining and machine tools, tribology and surface engineering, solid mechanics, applied and computational mechanics, mechanical design, mechatronics and robotics, fluid mechanics and heat transfer, renewable energies, biomechanics, nanoengineering and nanomechanics. At the end of each chapter, a list of 10 questions (and answers) is provided.
Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2016-11-15 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality. In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity. This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology. Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity
Download or read book Machining of Hard Materials written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2011-02-24 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hard machining is a relatively recent technology that can be defined as a machining operation, using tools with geometrically defined cutting edges, of a work piece that has hardness values typically in the 45-70HRc range. This operation always presents the challenge of selecting a cutting tool insert that facilitates high-precision machining of the component, but it presents several advantages when compared with the traditional methodology based in finish grinding operations after heat treatment of work pieces. Machining of Hard Materials aims to provide the reader with the fundamentals and recent advances in the field of hard machining of materials. All the chapters are written by international experts in this important field of research. They cover topics such as: • advanced cutting tools for the machining of hard materials; • the mechanics of cutting and chip formation; • surface integrity; • modelling and simulation; and • computational methods and optimization. Machining of Hard Materials can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing and mechanical engineers, and professionals in machining and related industries. It can also be used as a text for advanced undergraduate or postgraduate students studying mechanical engineering, manufacturing, or materials.
Download or read book Green Materials and Advanced Manufacturing Technology written by Samson Jerold Samuel Chelladurai and published by CRC Press. This book was released on 2020-12-30 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes recent theoretical and practical advancements in green composite materials and advanced manufacturing technology. It provides important original and theoretical experimental results which use nonroutine technologies often unfamiliar to some readers and covers novel applications of more familiar experimental techniques and analyses of composite problems. Green Materials and Advanced Manufacturing Technology: Concepts and Applications provides insight and a better understanding into the development of green composite materials and advanced manufacturing technology used in various manufacturing sectors. It highlights recent trends in the fields of green composites, metal matrix composites, ceramic matrix composites, surface modification using laser cladding, types of dust collectors in waste management and recycling in industries, machinability studies of metals and composites using surface grinding, drilling, electrical discharge machining, joining of metals using friction stir welding, shielded metal arc welding, and linear friction welding. This book is written for engineering students, postgraduate students, research scholars, faculty members, and industry professionals who are engaged in green composite materials and development of advanced manufacturing technology.
Download or read book Sustainable Machining Using MQL Application of Cutting Fluids written by Nageswara Rao Posinasetti and published by CRC Press. This book was released on 2024-03-07 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of metal cutting fluids is an integral part of industrial machining operations. Minimum quantity lubrication (MQL) is the latest form of cutting fluid application method currently used by several manufacturing organizations. This book consolidates all the available knowledge in terms of the application of different processes as well as materials in a concise fashion in one reference resource. Sustainable Machining Using MQL Application of Cutting Fluids offers a detailed discussion of the MQL mechanism in cutting fluid applications. It highlights the influence of MQL parameters on different workpiece materials and provides sound explanations along with photographs for all technical reasonings. The book presents the usage of both micro and nano cutting fluids in machining for sustainability while it also captures the knowledge in the field including the recent research outputs, as it illustrates a comprehensive coverage of MQL practical application. This book should be on the bookshelf of industrial engineers, those working in production and manufacturing, process designers, tool material designers, cutting tool designers, and quality specialists. Researchers, senior undergraduate students, and graduate students will also find this book full of very helpful reference information.
Download or read book Advanced Machining and Manufacturing Processes written by Kaushik Kumar and published by Springer. This book was released on 2018-04-17 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the various advanced manufacturing processes employed by manufacturing industries to improve their productivity in terms of socio-economic development. The authors present automated conventional and non-conventional machining techniques as well as virtual machining principles and techniques. Material removal by mechanical, chemical, thermal and electrochemical processes are described in detail. A glossary of key concepts is attached at end of the book.
Download or read book Comprehensive Materials Finishing written by M.S.J. Hashmi and published by Elsevier. This book was released on 2016-08-29 with total page 1467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finish Manufacturing Processes are those final stage processing techniques which are deployed to bring a product to readiness for marketing and putting in service. Over recent decades a number of finish manufacturing processes have been newly developed by researchers and technologists. Many of these developments have been reported and illustrated in existing literature in a piecemeal manner or in relation only to specific applications. For the first time, Comprehensive Materials Finishing, Three Volume Set integrates a wide body of this knowledge and understanding into a single, comprehensive work. Containing a mixture of review articles, case studies and research findings resulting from R & D activities in industrial and academic domains, this reference work focuses on how some finish manufacturing processes are advantageous for a broad range of technologies. These include applicability, energy and technological costs as well as practicability of implementation. The work covers a wide range of materials such as ferrous, non-ferrous and polymeric materials. There are three main distinct types of finishing processes: Surface Treatment by which the properties of the material are modified without generally changing the physical dimensions of the surface; Finish Machining Processes by which a small layer of material is removed from the surface by various machining processes to render improved surface characteristics; and Surface Coating Processes by which the surface properties are improved by adding fine layer(s) of materials with superior surface characteristics. Each of these primary finishing processes is presented in its own volume for ease of use, making Comprehensive Materials Finishing an essential reference source for researchers and professionals at all career stages in academia and industry. Provides an interdisciplinary focus, allowing readers to become familiar with the broad range of uses for materials finishing Brings together all known research in materials finishing in a single reference for the first time Includes case studies that illustrate theory and show how it is applied in practice
Download or read book Advanced Manufacturing and Processing Technology written by Chander Prakash and published by CRC Press. This book was released on 2020-10-25 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates recent research, theories, and practices relevant to the areas of surface engineering and the processing of materials for functional applications in the aerospace, automobile, and biomedical industries. The book focuses on the hidden technologies and advanced manufacturing methods that may not be standardized by research institutions but are greatly beneficial to material and manufacturing industrial engineers in many ways. It details projects, research activities, and innovations in a global platform to strengthen the knowledge of the concerned community. The book covers surface engineering including coating, deposition, cladding, nanotechnology, surface finishing, precision machining, processing, and emerging advanced manufacturing technologies to enhance the performance of materials in terms of corrosion, wear, and fatigue. The book captures the emerging areas of materials science and advanced manufacturing engineering and presents recent trends in research for researchers, field engineers, and academic professionals.
Download or read book Functional Materials and Advanced Manufacturing written by Chander Prakash and published by CRC Press. This book was released on 2020-10-26 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume set addresses a new knowledge of function materials, their processing, and their characterizations. "Functional and Smart Materials", covered the synthesis and fabrication route of functional and smart materials for universal applications such as material science, mechanical engineering, manufacturing, metrology, nanotechnology, physics, chemical, biology, chemistry, civil engineering, and food science. "Advanced Manufacturing and Processing Technology" covers the advanced manufacturing technologies includes coating, deposition, cladding, nanotechnology, surface finishing, precision machining, processing, and emerging advanced manufacturing technologies for processing of materials for functional applications. "Characterization, Testing, Measurement and Metrology" covered the application of new and advanced characterization techniques to investigate and analysis the processed materials.