Download or read book Advances in Electrometallurgy written by and published by . This book was released on 2007 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in brazing written by V.F. Khorunov and published by Elsevier Inc. Chapters. This book was released on 2013-03-04 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter investigates the problem of brazing heat-resistant materials – high nickel-base and γ-TiAl-base intermetallic alloys. Diffusion brazing with filler metals of the Ni–Cr–B and Ni–Cr–B–Si systems is inefficient for nickel alloys, while composite filler metals based on these systems yield satisfactory results. When used as an alternative to boron- and silicon-containing filler metals, alloys of the Ni–Cr–Zr systems do not form hard and brittle phases at the interface in the joints. Filler metals based on the Ti–Zr system are best suited for joining γ-TiAl-base intermetallic alloys. Ti–Zr–Fe and Ti–Zr–Mn alloys, which show promise as brazing filler metals are selected, and structures and mechanical properties of the brazed joints are presented.
Download or read book Advances in Brazing written by Dušan P Sekulić and published by Elsevier. This book was released on 2013-03-04 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brazing processes offer enhanced control, adaptability and cost-efficiency in the joining of materials. Unsurprisingly, this has lead to great interest and investment in the area. Drawing on important research in the field, Advances in brazing provides a clear guide to the principles, materials, methods and key applications of brazing.Part one introduces the fundamentals of brazing, including molten metal wetting processes, strength and margins of safety of brazed joints, and modeling of associated physical phenomena. Part two goes on to consider specific materials, such as super alloys, filler metals for high temperature brazing, diamonds and cubic boron nitride, and varied ceramics and intermetallics. The brazing of carbon-carbon (C/C) composites to metals is also explored before applications of brazing and brazed materials are discussed in part three. Brazing of cutting materials, use of coating techniques, and metal-nonmetal brazing for electrical, packaging and structural applications are reviewed, along with fluxless brazing, the use of glasses and glass ceramics for high temperature applications and nickel-based filler metals for components in contact with drinking water.With its distinguished editor and international team of expert contributors, Advances in brazing is a technical guide for any professionals requiring an understanding of brazing processes, and offers a deeper understanding of the subject to researchers and engineers within the field of joining. - Reviews the advances of brazing processes in joining materials - Discusses the fundamentals of brazing and considers specific materials, including super alloys, filler metals, ceramics and intermetallics - Brazing of cutting materials and structural applications are also discussed
Download or read book Bonding by Self Propagating Reaction written by David. J. Fisher and published by Materials Research Forum LLC. This book was released on 2019-03-15 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bonding by Self-Propagating Reaction represents a highly promising approach for the joining of dissimilar materials in such fields as microelectronics, infrared sensors, micro-electro-mechanical systems (MEMS), aerospace and nuclear industries, and surface engineering for chemical, mechanical and microsystems applications. The technique leads to high bonding strengths and low rates of damage on substrates. Another advantage is that it does not require high processing temperatures. The book is based on 251 original resources and includes their direct web link for in-depth reading.
Download or read book Advances in Kinetics and Mechanism of Chemical Reactions written by Gennady E. Zaikov and published by CRC Press. This book was released on 2013-03-11 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Kinetics and Mechanism of Chemical Reactions describes the chemical physics and/or chemistry of ten novel material or chemical systems. These ten novel material or chemical systems are examined in the context of various issues, including structure and bonding, reactivity, transport properties, polymer properties, or biological character
Download or read book T T Chen Honorary Symposium on Hydrometallurgy Electrometallurgy and Materials Characterization written by Shijie Wang and published by John Wiley & Sons. This book was released on 2012-05-09 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by the Hydrometallurgy and Electrometallurgy Committee and the Materials Characterization Committee of the Extraction and Processing Division of TMS (The Minerals, Metals & Materials Society) Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA March 11-15, 2012
Download or read book International Conference on Advances in the Theory of Ironmaking and Steelmaking ATIS 2009 December 09 11 2009 written by Govind S. Gupta and published by Allied Publishers. This book was released on 2009 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributed articles presented in the International Conference on Advances in the Theory of Ironmaking and Steelmaking; organized by the Dept. of Material Engineering, IISc., Bangalore.
Download or read book Advanced Materials in Industrial and Environmental Engineering written by Andrey G. Syrkov and published by Trans Tech Publications Ltd. This book was released on 2020-07-21 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer-reviewed papers from the Conference Nanophysics and Nanomaterials (NaN), on November 27-28, 2019, St. Petersburg, Russia.
Download or read book Advances in Electrochemical Science and Engineering written by Heinz Gerischer and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like its predecessors, volume three of this meanwhile well-established series covers selected topics from electrochemical science and its applications. The authors have been carefully selected among the leaders in the respective fields. Their authoritative and comprehensive contributions represent the latest state-of-the-art. Special attention is paid to recent developments, which are critically and thoroughly discussed. Each contribution of the present volume continues the high standards of this series. This new series has been warmly welcomed by scientists world-wide, which is reflected by the following review of the second volume: 'All the contributions in this volume are well up to the standard of this excellent series and will be of great value to electrochemists... The editors again deserve to be congratulated on this fine collection of reviews.' Journal of Electroanalytical Chemistry and Interfacial Chemistry
Download or read book Advanced Nanomaterials and Nanocomposites for Bioelectrochemical Systems written by Nabisab Mujawar Mubarak and published by Elsevier. This book was released on 2023-03-15 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Nanomaterials and Nanocomposites for Bioelectrochemical Systems covers advancements in nanomaterial and nanocomposite applications for microbial fuel cells. One of the advantages of using microbial fuel cells is the simultaneous treatment of wastewater and the generation of electricity from complex organic waste and biomass, which demonstrates that microbial fuel cells are an active area of frontier research. The addition of microorganisms is essential to enhance the reaction kinetics. This type of fuel cell helps to convert complex organic waste into useful energy through the metabolic activity of microorganisms, thereby generating energy. By incorporating nano-scale fillers into the nanocomposite matrix, the performance of the anode material can be improved. This is an important reference source for materials scientists and engineers who want to learn more about how nanotechnology is being used to create more efficient fuel cells. - Describes the major nanomaterials and nanocomposites used in microbial fuel cells - Explains how microbial fuel cells are being used in renewable energy applications - Assesses the challenges of manufacturing nanomaterials for microbial fuel cells on an industrial scale
Download or read book Bioelectrochemical Systems written by Korneel Rabaey and published by IWA Publishing. This book was released on 2009-12-01 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the context of wastewater treatment, Bioelectrochemical Systems (BESs) have gained considerable interest in the past few years, and several BES processes are on the brink of application to this area. This book, written by a large number of world experts in the different sub-topics, describes the different aspects and processes relevant to their development. Bioelectrochemical Systems (BESs) use micro-organisms to catalyze an oxidation and/or reduction reaction at an anodic and cathodic electrode respectively. Briefly, at an anode oxidation of organic and inorganic electron donors can occur. Prime examples of such electron donors are waste organics and sulfides. At the cathode, an electron acceptor such as oxygen or nitrate can be reduced. The anode and the cathode are connected through an electrical circuit. If electrical power is harvested from this circuit, the system is called a Microbial Fuel Cell; if electrical power is invested, the system is called a Microbial Electrolysis Cell. The overall framework of bio-energy and bio-fuels is discussed. A number of chapters discuss the basics – microbiology, microbial ecology, electrochemistry, technology and materials development. The book continues by highlighting the plurality of processes based on BES technology already in existence, going from wastewater based reactors to sediment based bio-batteries. The integration of BESs into existing water or process lines is discussed. Finally, an outlook is provided of how BES will fit within the emerging biorefinery area.
Download or read book Advanced Ceramics and Applications written by Rainer Gadow and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-10-04 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: New ceramic materials are highly appreciated due to their manifold features including mechanical properties, environmental uses, energy applications and many more. This work presents the latest research development and covers a broad range of topics from stabilized zirconia ceramics with enhanced functional properties to ceramic components in medical/biological applications.
Download or read book Direct Copper Interconnection for Advanced Semiconductor Technology written by Dongkai Shangguan and published by CRC Press. This book was released on 2024-06-28 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the “More than Moore” era, performance requirements for leading edge semiconductor devices are demanding extremely fine pitch interconnection in semiconductor packaging. Direct copper interconnection has emerged as the technology of choice in the semiconductor industry for fine pitch interconnection, with significant benefits for interconnect density and device performance. Low-temperature direct copper bonding, in particular, will become widely adopted for a broad range of highperformance semiconductor devices in the years to come. This book offers a comprehensive review and in-depth discussions of the key topics in this critical new technology. Chapter 1 reviews the evolution and the most recent advances in semiconductor packaging, leading to the requirement for extremely fine pitch interconnection, and Chapter 2 reviews different technologies for direct copper interconnection, with advantages and disadvantages for various applications. Chapter 3 offers an in-depth review of the hybrid bonding technology, outlining the critical processes and solutions. The area of materials for hybrid bonding is covered in Chapter 4, followed by several chapters that are focused on critical process steps and equipment for copper electrodeposition (Chapter 5), planarization (Chapter 6), wafer bonding (Chapter 7), and die bonding (Chapter 8). Aspects related to product applications are covered in Chapter 9 for design and Chapter 10 for thermal simulation. Finally, Chapter 11 covers reliability considerations and computer modeling for process and performance characterization, followed by the final chapter (Chapter 12) outlining the current and future applications of the hybrid bonding technology. Metrology and testing are also addressed throughout the chapters. Business, economic, and supply chain considerations are discussed as related to the product applications and manufacturing deployment of the technology, and the current status and future outlook as related to the various aspects of the ecosystem are outlined in the relevant chapters of the book. The book is aimed at academic and industry researchers as well as industry practitioners, and is intended to serve as a comprehensive source of the most up-to-date knowledge, and a review of the state-of-the art of the technology and applications, for direct copper interconnection and advanced semiconductor packaging in general.
Download or read book Engineering and Mining Journal written by and published by . This book was released on 1907 with total page 1414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Springer Handbook of Electrochemical Energy written by Cornelia Breitkopf and published by Springer. This book was released on 2016-12-05 with total page 1019 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook covers all fundamentals of electrochemistry for contemporary applications. It provides a rich presentation of related topics of electrochemistry with a clear focus on energy technologies. It covers all aspects of electrochemistry starting with theoretical concepts and basic laws of thermodynamics, non-equilibrium thermodynamics and multiscale modeling. It further gathers the basic experimental methods such as potentiometry, reference electrodes, ion-sensitive electrodes, voltammetry and amperometry. The contents cover subjects related to mass transport, the electric double layer, ohmic losses and experimentation affecting electrochemical reactions. These aspects of electrochemistry are especially examined in view of specific energy technologies including batteries, polymer electrolyte and biological fuel cells, electrochemical capacitors, electrochemical hydrogen production and photoelectrochemistry. Organized in six parts, the overall complexity of electrochemistry is presented and makes this handbook an authoritative reference and definitive source for advanced students, professionals and scientists particularly interested in industrial and energy applications.
Download or read book Microbial Electrochemical Technologies written by Sonia M. Tiquia-Arashiro and published by CRC Press. This book was released on 2020-01-06 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book encompasses the most updated and recent account of research and implementation of Microbial Electrochemical Technologies (METs) from pioneers and experienced researchers in the field who have been working on the interface between electrochemistry and microbiology/biotechnology for many years. It provides a holistic view of the METs, detailing the functional mechanisms, operational configurations, influencing factors governing the reaction process and integration strategies. The book not only provides historical perspectives of the technology and its evolution over the years but also the most recent examples of up-scaling and near future commercialization, making it a must-read for researchers, students, industry practitioners and science enthusiasts. Key Features: Introduces novel technologies that can impact the future infrastructure at the water-energy nexus. Outlines methodologies development and application of microbial electrochemical technologies and details out the illustrations of microbial and electrochemical concepts. Reviews applications across a wide variety of scales, from power generation in the laboratory to approaches. Discusses techniques such as molecular biology and mathematical modeling; the future development of this promising technology; and the role of the system components for the implementation of bioelectrochemical technologies for practical utility. Explores key challenges for implementing these systems and compares them to similar renewable energy technologies, including their efficiency, scalability, system lifetimes, and reliability.
Download or read book Hydrometallurgy 2008 written by and published by SME. This book was released on 2008 with total page 1201 pages. Available in PDF, EPUB and Kindle. Book excerpt:
