Download or read book Advances in Desiccant Dehumidification written by Vivekh Prabakaran and published by Springer Nature. This book was released on 2021-07-21 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically analyses state-of-the-art technology and research related to desiccant dehumidification. It provides key insights into the current research direction, and presents global research and development interests. It begins by offering a comprehensive review of conventional desiccants and their underlying engineering challenges. Fundamental material characteristic properties and factors critical to the desiccant synthesis are highlighted. The applicability of next-generation advanced materials to address the challenges is documented, and the advantages of desiccant coated heat exchangers are evaluated. Lastly, the potential applications of desiccant dehumidifiers in various energy-connected applications are discussed, and case studies on industrial/building cooling systems are provided. Specifically targeted at HVAC engineers, thermal scientists, energy-engineering researchers, and graduate-level students in the field, the technical content balances fundamental concepts and applications.
Download or read book Promising Advances in Desiccant Cooling written by Terry R. Penney and published by . This book was released on 1985 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Desiccant Assisted Cooling written by Carlos Eduardo Leme Nóbrega and published by Springer Science & Business Media. This book was released on 2013-11-19 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing concern with indoor air quality has led to air-quality standards with increased ventilation rates. Although increasing the volume flow rate of outside air is advisable from the perspective of air-quality, it is detrimental to energy consumption, since the outside air has to be brought to the comfort condition before it is insufflated to the conditioned ambient. Moreover, the humidity load carried within outside air has challenging HVAC engineers to design cooling units which are able to satisfactorily handle both sensible and latent contributions to the thermal load. This constitutes a favorable scenario for the use of solid desiccants to assist the cooling units. In fact, desiccant wheels have been increasingly applied by HVAC designers, allowing distinct processes for the air cooling and dehumidification. In fact, the ability of solid desiccants in moisture removal is effective enough to allow the use of evaporative coolers, in opposition to the traditional vapor-compression cycle, resulting in an ecologically sound system which uses only water as the refrigerant. Desiccant Assisted Cooling: Fundamentals and Applications presents different approaches to the mathematical modeling and simulation of desiccant wheels, as well as applications in thermal comfort and humidity controlled environments. Experts in the field discuss topics from enthalpy, lumped models for heat and mass transfer, and desiccant assisted radiant cooling systems, among others. Aimed at air-conditioning engineers and thermal engineering researchers, this book can also be used by graduate level students and lecturers in the field.
Download or read book Advances in Air Conditioning Technologies written by Chua Kian Jon and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights key recent developments in air conditioning technologies for cooling and dehumidification with the specific objectives to improve energy efficiency and to minimize environmental impact. Today, air conditioning, comprising cooling and dehumidification, is a necessity in commercial and residential buildings and even in many industrial processes. This book provides key update on recent developments in air conditioning systems, cooling cycles and innovative cooling/dehumidification technologies. Key technologies related to cooling include heat-driven absorption and adsorption cooling and water-based dew point evaporative cooling. Technologies connected with dehumidification involve new generations of adsorbent-desiccant dehumidifiers, liquid-based desiccants and membranes that sieve out water vapor from air. Losses in cooling cycles and thermo-economic analysis for a sustainable economy are also judiciously documented. .
Download or read book Advances in Solar Heating and Cooling written by Ruzhu Wang and published by Woodhead Publishing. This book was released on 2016-05-25 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Solar Heating and Cooling presents new information on the growing concerns about climate change, the security of energy supplies, and the ongoing interest in replacing fossil fuels with renewable energy sources. The amount of energy used for heating and cooling is very significant, estimated, for example, as half of final energy consumption in Europe. Solar thermal installations have the potential to meet a large proportion of the heating and cooling needs of both buildings and industry and the number of solar thermal installations is increasing rapidly. This book provides an authoritative review of the latest research in solar heating and cooling technologies and applications. Provides researchers in academia and industry with an authoritative overview of heating and cooling for buildings and industry in one convenient volume Part III, ‘Solar cooling technologies’ is contributed by authors from Shanghai Jiao Tong University, which is a world-leader in this area Covers advanced applications from zero-energy buildings, through industrial process heat to district heating and cooling
Download or read book Recent Advances in Energy Technologies written by N. Lakshmi Narasimhan and published by Springer Nature. This book was released on 2022-09-29 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the first International Conference on Energy and Materials Technologies (ICEMT) 2021, organized by the Department of Mechanical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam, India. It covers the recent technologies in two broad thematic areas: energy and materials. Various topics covered in this book include hybrid energy, advanced energy systems, energy management, energy policy, geothermal, nuclear energy, bio-energy, waste to energy, power plants, and automotives. The book will be useful for students, researchers, and professionals in the area of mechanical engineering, especially various domains of energy.
Download or read book Ultrasonic Technology for Desiccant Regeneration written by Ye Yao and published by John Wiley & Sons. This book was released on 2014-12-31 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chapters in this volume explore ultrasound-assisted regeneration of silica gel, ultrasound-assisted regeneration for a new honeycomb desiccant material, ultrasound-atomizing regeneration for liquid desiccants, ultrasonic transducers, and much more.
Download or read book Energy Efficient Systems for Agricultural Applications written by Muhammad Sultan and published by Springer Nature. This book was released on 2021-12-14 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports thermodynamic investigation, analyses, and options of temperature/humidity control systems and their technologies for agricultural applications including (but not limited to) fruits and vegetable storage, poultry air-conditioning, livestock thermal comfort, and wet market air-conditioning. The optimum temperature and humidity requirements for these agricultural applications are identified. Consequently, energy-efficient heat pump options are explored accordingly. The book helps to understand and to apply the thermodynamic knowledge of the energy-efficient systems for agricultural applications.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1979 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Air Conditioning Technologies written by Chua Kian Jon and published by Springer Nature. This book was released on 2020-10-21 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights key recent developments in air conditioning technologies for cooling and dehumidification with the specific objectives to improve energy efficiency and to minimize environmental impact. Today, air conditioning, comprising cooling and dehumidification, is a necessity in commercial and residential buildings and even in many industrial processes. This book provides key update on recent developments in air conditioning systems, cooling cycles and innovative cooling/dehumidification technologies. Key technologies related to cooling include heat-driven absorption and adsorption cooling and water-based dew point evaporative cooling. Technologies connected with dehumidification involve new generations of adsorbent–desiccant dehumidifiers, liquid-based desiccants and membranes that sieve out water vapor from air. Losses in cooling cycles and thermo-economic analysis for a sustainable economy are also judiciously documented.
Download or read book Thermomechanics of Drying Processes written by Stefan Jan Kowalski and published by Springer Science & Business Media. This book was released on 2012-11-29 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is interdisciplinary in character and combines the knowledge of me chanics and chemical engineering with the aim of presenting a more exhaustive analysis ofthe phenomena occurring in wet materials during drying. Traditionally, the subject of drying has been an almost exclusive domain of chemical engineers. The drying curricula have mostly included only the courses of heat and mass transfer or diffusion. The mechanical phenomena that accompany drying, as for example, warping or deformation of dried materials, or the drying induced stresses and fissures of the material, were ignored or considered in a rather obscure way. This book broadens the scope of drying theory, bringing into the curriculum the tools enabling the study of both heat and mass transport processes and the me chanical phenomena that occur in wet materials under drying. There is little available literature that brings together heat and mass transport processes and mechanical phenomena in a unified approach to drying processes.
Download or read book Machining written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2008-07-11 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining is one of the most important manufacturing processes. Parts manufactured by other processes often require further operations before the product is ready for application. “Machining: Fundamentals and Recent Advances” is divided into two parts. Part I explains the fundamentals of machining, with special emphasis on three important aspects: mechanics of machining, tools, and work-piece integrity. Part II is dedicated to recent advances in machining, including: machining of hard materials, machining of metal matrix composites, drilling polymeric matrix composites, ecological machining (minimal quantity of lubrication), high-speed machining (sculptured surfaces), grinding technology and new grinding wheels, micro- and nano-machining, non-traditional machining processes, and intelligent machining (computational methods and optimization). Advanced students, researchers and professionals interested or involved in modern manufacturing engineering will find the book a useful reference.
Download or read book Temperature and Humidity Independent Control THIC of Air conditioning System written by Xiaohua Liu and published by Springer Science & Business Media. This book was released on 2014-01-16 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Temperature and Humidity Independent Control (THIC) of Air-conditioning System focuses on temperature and humidity independent control (THIC) systems, which represents a new concept and new approach for indoor environmental control. This book presents the main components of the THIC systems, including dehumidification devices, high-temperature cooling devices and indoor terminal devices. Other relevant issues, such as operation and control strategy and case studies, are also included. This book is intended for air-conditioning system designers and engineers as well as researchers working with indoor environments. Xiaohua Liu is an associate professor at the Building Energy Research Center, Tsinghua University, China. Yi Jiang is a member of the Chinese Academy of Engineering, the director of the Building Energy Research Center, Tsinghua University, China and the director of the China-USA Joint Research Center on Clean Energy. Tao Zhang is a Ph.D. candidate at the Building Energy Research Center, Tsinghua University, China.
Download or read book Fault Tolerant Process Control written by Prashant Mhaskar and published by Springer Science & Business Media. This book was released on 2012-11-27 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault-Tolerant Process Control focuses on the development of general, yet practical, methods for the design of advanced fault-tolerant control systems; these ensure an efficient fault detection and a timely response to enhance fault recovery, prevent faults from propagating or developing into total failures, and reduce the risk of safety hazards. To this end, methods are presented for the design of advanced fault-tolerant control systems for chemical processes which explicitly deal with actuator/controller failures and sensor faults and data losses. Specifically, the book puts forward: · A framework for detection, isolation and diagnosis of actuator and sensor faults for nonlinear systems; · Controller reconfiguration and safe-parking-based fault-handling methodologies; · Integrated-data- and model-based fault-detection and isolation and fault-tolerant control methods; · Methods for handling sensor faults and data losses; and · Methods for monitoring the performance of low-level PID loops. The methodologies proposed employ nonlinear systems analysis, Lyapunov techniques, optimization, statistical methods and hybrid systems theory and are predicated upon the idea of integrating fault-detection, local feedback control, and supervisory control. The applicability and performance of the methods are demonstrated through a number of chemical process examples. Fault-Tolerant Process Control is a valuable resource for academic researchers, industrial practitioners as well as graduate students pursuing research in this area.
Download or read book Assessment of Power System Reliability written by Marko Čepin and published by Springer Science & Business Media. This book was released on 2011-07-29 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of power system reliability is demonstrated when our electricity supply is disrupted, whether it decreases the comfort of our free time at home or causes the shutdown of our companies and results in huge economic deficits. The objective of Assessment of Power System Reliability is to contribute to the improvement of power system reliability. It consists of six parts divided into twenty chapters. The first part introduces the important background issues that affect power system reliability. The second part presents the reliability methods that are used for analyses of technical systems and processes. The third part discusses power flow analysis methods, because the dynamic aspect of a power system is an important part of related reliability assessments. The fourth part explores various aspects of the reliability assessment of power systems and their parts. The fifth part covers optimization methods. The sixth part looks at the application of reliability and optimization methods. Assessment of Power System Reliability has been written in straightforward language that continues into the mathematical representation of the methods. Power engineers and developers will appreciate the emphasis on practical usage, while researchers and advanced students will benefit from the simple examples that can facilitate their understanding of the theory behind power system reliability and that outline the procedure for application of the presented methods.
Download or read book Advances in Energy Research Vol 2 written by Suneet Singh and published by Springer Nature. This book was released on 2020-04-30 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 6th International Conference on Advances in Energy Research (ICAER 2017), which cover topics ranging from energy optimization, generation, storage and distribution, and emerging technologies, to energy management, policy, and economics. The book is inter-disciplinary in scope and addresses a host of different areas relevant to energy research, making it of interest to scientists, policymakers, students, economists, rural activists, and social scientists alike.
Download or read book Membrane Dehumidification and Cooling written by Vivekh Prabakaran and published by Elsevier. This book was released on 2023-05-01 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane Dehumidification and Cooling: Fundamentals and Applications presents the state-of-the-art on membrane dehumidifiers, highlighting their most recent advancements and providing key insights into global R&D interests. With a strong focus on applications, the book offers characterization techniques to evaluate the potential of hygroscopic materials, as well as experimental methods to study the dehumidifiers’ performance. The book begins by highlighting the demerits of conventional cooling systems and then reviews electrically driven alternative cooling solutions. A comparative study between different dehumidification techniques is also given, along with sections on fundamental transport mechanisms and thermodynamic modeling. Finally, scaling, heat transfer and thermodynamic analysis are presented, along with a review of hybrid membrane-based air-conditioners. This book is a one-stop resource for recent advancements in membrane dehumidification and cooling applications. It is an essential read for students, researchers and engineers interested in thermal engineering, heat and mass transfer, alternative cooling, energy materials and dehumidification. Presents the fundamental aspects and applications of the latest membrane dehumidification technologies Comprehensively emphasizes new energy materials, experimental techniques, numerical methods, and thermal evaluation frameworks Focuses on the feasibility of membrane dehumidifiers in the next generation of hybrid cooling systems
