Download or read book Formability of Metallic Materials written by D. Banabic and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a brief introduction into crystal plasticity,the fun- damentals of crystallographic textures and plastic anisotro- py, a main topic of this book, are outlined. A large chapter is devoted to formability testing both for bulk metal and sheet metal forming. For the first time testing methods for plastic anisotropy of round bars and tubes are included. A profound survey is given of literature about yield criteria for anisotropic materials up to most recent developments and the calculation of forming limits of anisotropic sheet me- tal. Other chapters are concerned with properties of workpieces after metal forming as well as the fundamentals of the theory of plasticity and finite element simulation of metal forming processes. The book is completed by a collection of tables of international standards for formability testing and of flow curves of metals which are most commonly used in metal forming. It is addressed both to university and industrial readers.
Download or read book Advances in Superconductivity X written by Kozo Osamura and published by Springer. This book was released on 1998-06 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium on Superconductivity, which has been held annu ally since 1988, is a forum for presenting the most up-to-date information about a broad range of research and development in superconductivity, from funda mental aspects to applications. More than 10 years have passed since the discovery of oxide superconductors and since various developments of applications began. It may be said that the prospects for application of oxide superconductors recently have opened up. Great progress has been made toward practical use, for example, of the flywheel, which uses bulk materials, and the high-performance cryo-cooled magnet made of bismuth wire. These were the results of persistent efforts to develop materials from the viewpoint of materials science and engineering. Also important is the progress in comprehensive understanding of high temperature superconductivity. Unique electronic properties of cuprates such as the non-Fermi liquid normal state, spin-charge separation, spin gap, and d-wave symmetry were discussed at the symposium, as were the unique electromagnetic properties resulting from the low dimensionality of cuprates. In the field of new superconductors, many exotic materials have been discovered since 1986. A decade of work with cuprate superconductors is reviewed in this proceedings, and several of the newest materials are presented. These papers will be instructive for many researchers and for students who are to enter this field.
Download or read book Advances in Anisotropy written by Julie A. Hood and published by . This book was released on 2001 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Hydrogen Embrittlement Study written by Vladimir A. Polyanskiy and published by Springer Nature. This book was released on 2021-03-13 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a collection of chapters on the current problems associated with hydrogen damage. It discusses the effect of hydrogen on material properties and its interaction with the material microstructure, physical features of hydrogen transport in metals and alloys, as well as applicable methods of measuring concentration of hydrogen in solid media.
Download or read book Anisotropy and Localization of Plastic Deformation written by J.P. Boehler and published by Springer. This book was released on 1991-07-31 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of PLASTICITY '91: The Third International Symposium on Plasticity and Its Current Applications
Download or read book Advances in Materials and Processing Technologies II written by M.S.J. Hashmi and published by Trans Tech Publications Ltd. This book was released on 2011-06-30 with total page 2000 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Advanced Materials and Processing are important areas of research in Engineering Science and Technology, which have to focus on bridging the critical gap between researchers and engineers in order to shape the new world. Advanced Materials and Processing play an increasingly important role in the global economy and in daily life. Researchers and engineers strive to develop new devices and processes, using mathematical and analytical tools, in order to create technologies for a rapidly expanding range of materials and manufacturing processes. A large proportion of the present papers addressed current scientific research and provided solutions to industrial problems; thereby creating an environment of mutual interest to industry and academia. The papers are grouped into 10 chapters: 1. Forming Processes, 2. Casting, Joining and Related Processes, 3. Materials, 4. Materials Removal Processes, 5. High Energy Beam Removal Process, 6. Precision Engineering and Nano-Technology, 7. Surface Engineering, 8. Computer-Aided Engineering, 9. Green Manufacturing and Management, 10. Others. This comprehensive coverage will be much appreciated by readers.
Download or read book Advances in Applied Sciences and Manufacturing written by Yi Qian Wang and published by Trans Tech Publications Ltd. This book was released on 2013-12-13 with total page 1430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS) Collection of selected, peer reviewed papers from the 2013 International Forum on Materials Analysis and Testing Technology (IFMATT 2013), December 9-10, 2013, Qingdao, China. The 319 papers are grouped as follows: Chapter 1: Materials Science and Chemistry. Research, Analysis and Testing; Chapter 2: Mechanical Engineering and Industrial Manufacturing: Design, Analysis and Testing; Chapter 3: Mechatronics, Robotics, Control and Automation, Communication and Information Technologies. Research, Analysis and Applications; Chapter 4: Signal and Data Processing, Applied and Computational Mathematics, Algorithms and Procedures; Chapter 5: Management Science, Engineering Management, Economics, Logistics and Business Applications; Chapter 6: Medical and Pharmacology, Biotechnology and Agriculture; Chapter 7: Environmental Protection and Resource Development
Download or read book Recent Advances in Contact Mechanics written by Georgios E. Stavroulakis and published by Springer Science & Business Media. This book was released on 2012-10-19 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contact mechanics is an active research area with deep theoretical and numerical roots. The links between nonsmooth analysis and optimization with mechanics have been investigated intensively during the last decades, especially in Europe. The study of complementarity problems, variational -, quasivariational- and hemivariational inequalities arising in contact mechanics and beyond is a hot topic for interdisciplinary research and cooperation. The needs of industry for robust solution algorithms suitable for large scale applications and the regular updates of the respective elements in major commercial computational mechanics codes, demonstrate that this interaction is not restricted to the academic environment. The contributions of this book have been selected from the participants of the CMIS 2009 international conference which took place in Crete and continued a successful series of specialized contact mechanics conferences.
Download or read book IUTAM Symposium on Anisotropy Inhomogeneity and Nonlinearity in Solid Mechanics written by David F. Parker and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the IUTAM-ISIMM Symposium, held in Nottingham, U.K., 30 August--3 September 1994
Download or read book Applied Plasticity written by Jagabandhu Chakrabarty and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical engineering, an engineering discipline forged and shaped by the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face profound issues of productivity and competitiveness that require engineering solutions, among others . The Mechanical Engineering Series features graduate texts and research monographs intended to address the need for information in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that covers a broad range of c- centrations important to mechanical engineering graduate education and research . We are fortunate to have a distinguished roster of consulting editors on the ad- sory board, each an expert in one of the areas of concentration . The names of the consulting editors are listed on the facing page of this volume . The areas of conc- tration are applied mechanics, biomechanics, computational mechanics, dynamic systems and control, energetics , mechanics of materials, processing, production systems, thermal science, and tribology .
Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Download or read book Anisotropy and Microseismics Theory and Practice written by Vladimir Grechka and published by SEG Books. This book was released on 2020-08-01 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Takes readers on a path of discovery of rarely examined wave phenomena and their possible usage. Chapters begin by formulating a question, followed by explanations of what is exciting about it, where the mystery might lie, and what could be the potential value of answering the question.
Download or read book Advanced Magnetoelastic and Magnetocaloric Materials for Device Applications written by Ravi L. Hadimani and published by Ravi Hadimani. This book was released on 2009 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent advances in two dimensional van der Waals magnets written by Hang Xu and published by OAE Publishing Inc.. This book was released on 2022-04-20 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced EPR written by A.J. Hoff and published by Elsevier. This book was released on 2012-12-02 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced EPR: Applications in Biology and Biochemistry provides an up-to-date survey of existing EPR techniques and their applications in biology and biochemistry, and also provides a wealth of ideas for future developments in instrumentation and theory. The material is broadly organized into four parts. In the first part (chapters 1 to 6) pulsed EPR is discussed in detail. The second part (chapters 7 to 12) provides detailed discussions of a number of novel and experimental methods. The third part comprises seven chapters on double-resonance techniques, five on ENDOR and two on optically- and reaction yield-detected resonance. The final part is devoted to a thorough discussion of a number of new developments in the application of EPR to various biological and biochemical problems. Advanced EPR will interest biophysicists, physical biochemists, EPR spectroscopists and others who will value the extensive treatment of pulsed EPR techniques, the discussion of new developments in EPR instrumentation, and the integration of theory and experimental details as applied to problems in biology and biochemistry.
Download or read book Foundations of Anisotropy for Exploration Seismics written by K. Helbig and published by Elsevier. This book was released on 2015-08-11 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last few years, anisotropy has become a "hot topic" in seismic exploration and seismology. It is now recognised that geological media deviate more or less from isotropy. This has consequences for acquisition, processing and interpretation of seismic data and also helps determine the cause of anisotropy and adds to our knowledge concerning the structure of the medium at scales beyond the resolution of the seismic method. This volume addresses the theoretical foundations of wave propagation in anisotropic media at an easily accessible level. The treatment is not restricted to exploration seismology. The book commences with fundamental material and covers the description of wave propagation in anisotropic conditions by means of slowness and wave surfaces. It continues to explore the theory of elasticity, the interaction of elasticity and material symmetry and conditions imposed by the stability of the medium. Wave propagation in general anisotropic solids are discussed referring in particular to singular and longitudinal directions. Slowness and wave surfaces in transversely isotropic media and in the planes of symmetry of orthorhombic media is presented and then moves on to wave propagation in orthorhombic media by means of "squared slowness surfaces". The latter part of the book deals with layer-induced anisotropy showing how a particular internal structure of a medium leads to anisotropy and how much of this structure can be recovered by "inversion" of the modelling algorithm. A few fundamental aspects of exploration seismology are also discussed. The final chapter discusses how concepts which were developed by Kelvin, but only recently understood, can be utilised to determine the symmetry class and orientation of an elastic medium.
Download or read book Proceedings of Advances in Optical Biophysics written by Society of Photo-optical Instrumentation Engineers and published by SPIE-International Society for Optical Engineering. This book was released on 1998 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
