Download or read book Advances in Aerogel Composites for Environmental Remediation written by Aftab Aslam Parwaz Khan and published by Elsevier. This book was released on 2021-05-29 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Aerogel Composites for Environmental Remediation presents both contextual information aboutaerogels and details about their application in environmental remediation. A wide variety of aerogels are discussed, rangingfrom common to advanced and from natural to synthetic. By exploring ongoing research and developments in the environmentalremediation technologies using aerogel and its composites, this book addresses common day-to-day environmental problemsand presents solutions to the use of aerogel materials. The chapters discuss fabrication of various aerogel composites, alongwith their design and applications toward different environmental remediation technologies. Additionally, the properties andadvantages of aerogels are compared and contrasted to those of traditional materials. Given the consistent increase in environmental pollution, there is an urgent need to explore new materials for advances in remediationtechnology. Advances in Aerogel Composites for Environmental Remediation brings researchers and practitionersin the fields of environmental remediation, environmental science, and engineering to the forefront of remediation technologieswith a thorough breakdown of the benefits of and techniques relevant to aerogel composites. - Covers basic properties, unique properties, and fabrication techniques of aerogels, from basic silica aerogels topresent-day conventional aerogels - Discusses most of the major environmental remediation techniques and the advantages of using aerogels for theseremediation techniques in comparison to using traditional methods - Presents future prospects for utilizing aerogels in modern day-to-day life and in the fabrication of tangible new products

Download or read book Nanocomposites Advanced Materials for Energy and Environmental Aspects written by Mohammad Ehtisham Khan and published by Elsevier. This book was released on 2023-01-25 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposites-Advanced Materials for Energy and Environmental Aspects provides a brief introduction to metal oxides. The book then discusses novel fabrication methodologies and eco-friendly methods for using a broad range of metal oxide-based nanocomposites in innovative ways. Key aspects include fundamental characteristics of environmentally sustainable fabrication of materials for solar power, power generation and the textiles industries. Commercialization and economic aspects that are currently of major significance are also discussed in detail. The book represents an important information resource for material scientists and engineers to create the next generation of products and devices for energy and environmental applications. Metal and metal oxide-based nanocomposites are at the heart of some of the most exciting developments in the field of energy and environmental research. They have exceptional properties and are utilized in electronic and environmental sensing devices, for energy storage, electrode materials, fuel cells, membranes, and more. Covers fabrication, standard characterization and photocatalytic mechanism for a wide range of applications Includes broad ranging metal and metal oxide-based applications covering environmental, energy, electronics, oil, gas, water treatment and sensing Evaluates dye consumption in the textiles industries and the energy related research that will determine options for sustainable and transformational opportunities

Download or read book New Polymer Nanocomposites for Environmental Remediation written by Chaudhery Mustansar Hussain and published by Elsevier. This book was released on 2018-02-19 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Polymer Nanocomposites for Environmental Remediation summarizes recent progress in the development of materials' properties, fabrication methods and their applications for treatment of contaminants, pollutant sensing and detection. This book presents current research into how polymer nanocomposites can be used in environmental remediation, detailing major environmental issues, and key materials properties and existing polymers or nanomaterials that can solve these issues. The book covers the fundamental molecular structure of polymers used in environmental applications, the toxicology, economy and life-cycle analysis of polymer nanocomposites, and an analysis of potential future applications of these materials. Recent research and development in polymer nanocomposites has inspired the progress and use of novel and cost-effective environmental applications. - Presents critical, actionable guidelines to the structure and property design of nanocomposites in environmental remediation - Focuses on taking technology out of the lab and into the real world - Summarizes the latest developments in polymer nanocomposites and their applications in catalytic degradation, adsorptive removal and detection of contaminants in the environment - Enables researchers to stay ahead of the curve, with a full discussion of regulatory issues and potential new applications and materials in this area

Download or read book Adsorption through Advanced Nanoscale Materials written by Chandrabhan Verma and published by Elsevier. This book was released on 2023-08-14 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption through Advanced Nanoscale Materials: Applications in Environmental Remediation brings together the latest developments in the utilization of advanced nanoadsorbents in wastewater treatment, pollution control, removal and remediation, gas separation and other environmental applications. The book begins by providing an overview of absorption, adsorbents and nanoadsorbents, introducing properties, classification, synthesis, characterization, enhancement of adsorption capabilities, principles and advantages and disadvantages of nanoadsorbents. Other sections cover the preparation of advanced nanoadsorbents based on specific materials for wastewater treatment, including adsorbents incorporating carbon nanotubes, graphene and graphene oxide, carbon dots and fullerene, polymer nanocomposites, metal oxides, nanoclay, nanofillers, and filtration membranes. Final sections examine the role of nanoadsorbents in broader environmental applications, including areas such as pollution control and removal and gas separation. Finally, other important considerations are studied, including toxicity and health impact, ecotoxicological effects, commercialization and economic issues, challenges and research gaps, trends, and future opportunities. Provides in-depth coverage of nanoadsorbents for a range of targeted environmental applications Covers, in detail, fundamentals such as synthesis methods, characterization and inhibition mechanisms Addresses key areas such as toxicity, health impact, research gaps, trends and commercialization

Download or read book Advanced Materials for Sustainable Environmental Remediation written by Dimitrios A Giannakoudakis and published by Elsevier. This book was released on 2022-04-21 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Materials for Sustainable Environmental Remediation: Terrestrial and Aquatic Environments presents detailed, comprehensive coverage of novel and advanced materials that can be applied to address the growing global concern of the pollution of natural resources in waters, the air and soil. It provides fundamental knowledge on available materials and treatment processes, as well as applications, including adsorptive remediation and catalytic remediation. Organized clearly by type of material, this book presents a consistent structure for each chapter, including characteristics of the materials, basic and important physicochemical features for environmental remediation applications, routes of synthesis, recent advances as remediation medias, and future perspectives. This book offers an interdisciplinary and practical examination of available materials and processes for environmental remediation that will be valuable to environmental scientists, materials scientists, environmental chemists, and environmental engineers alike. - Highlights a wide range of synthetic methodologies, physicochemical and engineered features of novel materials and composites/hybrids for environmental purposes - Provides comprehensive, consolidated coverage of advanced materials for environmental remediation applications for researchers in environmental science, materials science, and industry to identify in-depth solutions to pollution - Presents up-to-date details of advanced materials, including descriptions and characteristics that impact their applications in environmental remediation processes

Download or read book Supramolecular Gels written by Tifeng Jiao and published by John Wiley & Sons. This book was released on 2021-08-23 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supramolecular Gels Discover a current and authoritative overview of the cutting-edge in supramolecular gels from a leading voice in the field A promising new class of materials shows potential and is receiving increasing attention as an intelligent material for multifunctional systems. In a work that is sure to be of great interest to a wide variety of researchers, chemists, and engineers, Supramolecular Gels: Materials and Emerging Applications delivers an application-oriented and focused book exploring the most recent applications of supramolecular gels. This interdisciplinary book presents the underlying fundamentals of supramolecular gels before discussing their assembly mechanisms and structures. It also introduces different material systems, including composite supramolecular gels, organogels, hydrogels, self-healing, and graphene-based supramolecular gels. The book discusses current and emerging applications of these materials in devices like sensors and actuators, biomedical tools, and environmental applications. The distinguished author also offers valuable insights with respect to the design and character of brand-new versatile soft materials. Readers will also benefit from the inclusion of: A thorough introduction to the fundamentals of supramolecular gels, including their formation, classification, self-assembly, and mechanisms An exploration of supramolecular chirality and regulation in gel structures, as well as self-assembly and environmental applications of composite supramolecular gels Practical discussions of fluorescent organogels and hydrogels and their applications in analyte sensing An examination of self-healing and graphene-based supramolecular gels, and supramolecular gels for sensors and actuators Perfect for materials scientists, organic chemists, biochemists, catalytic chemists, and environmental chemists, Supramolecular Gels: Materials and Emerging Applications will also earn a place in the libraries of sensor developers and other professionals seeking a one-stop reference for this rapidly developing category of intelligent materials.

Download or read book Green Chemistry for the Development of Eco Friendly Products written by Chahal, Kavita Shakya and published by IGI Global. This book was released on 2022-06-10 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today’s world, it has become necessary to shift towards a more eco-friendly and sustainable approach in the industrial field to reduce pollution and stop toxic chemicals from entering the environment. Green chemistry is an emerging concept that can be utilized to assist with these environmental issues. To ensure this concept is employed to its full potential, further study on the best practices and challenges of implementation are required. Green Chemistry for the Development of Eco-Friendly Products discusses the main objective of green chemistry and how it can redefine and modify manufacturing processes and products in order to decrease hazards to human health. The book also considers key concepts of green chemistry, such as the need to make better use of available resources for the development of a chemical process. Covering critical topics such as bioplastics, waste, and hydrogen law, this reference work is ideal for chemists, business owners, environmentalists, policymakers, academicians, scholars, researchers, practitioners, instructors, and students.

Download or read book Functional Composite Materials Manufacturing Technology and Experimental Application written by C. Samson Jerold Samuel and published by Bentham Science Publishers. This book was released on 2022-04-19 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the advancements in the manufacture and testing of functional composites, metal matrix composites and polymer matrix composites. Chapters provide information about machinability studies of metals and composites using a variety of analytical techniques. The 12 book chapters also highlight updates in manufacturing technologies like CNC turning processes, electrical discharge machining, end milling, abrasive jet machining, electro chemical machining, additive manufacturing, and resistance spot welding. Readers will learn how to solve applied problems in industrial processing and applications. The book is of significant interest to industrialists working on the basic and experimental parameters for fabricating functional composites and manufacturing technology. Because of the multidisciplinary nature of the presented topics, the information presented in the book is of value to a broad audience involved in research, including materials scientists, chemists, physicists, manufacturing and chemical engineers and processing specialists who are involved and interested in the frontiers of composite materials.

Download or read book Green Chemistry for Sustainable Water Purification written by Shahid Ul-Islam and published by John Wiley & Sons. This book was released on 2023-02-07 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: GREEN CHEMISTRY for Sustainable Water Purification Green Chemistry for Sustainable Water Purification provides systematic coverage of the most recent research and development in clean water treatment technologies based on green materials and nanocomposites. Providing safe drinking water is one of the top priorities for scientists and industrialists working on projects, and one particular problem is the contamination of groundwater with toxic organic and inorganic compounds released by various industries. The presence of contaminants or industrial effluents in drinking water systems has increasingly become a major environmental challenge. To address the problem, several methods, including ion exchange, membrane filtration, advanced oxidation, biological degradation, photocatalytic degradation, electro-coagulation, and adsorption, are in operation for removing or minimizing these wastes. The purification process of wastewater using conventional methods, however, has proved to be markedly ineffective, very difficult, and highly expensive. On the other hand, for the remediation of water resources, a concept like green chemistry, based on the application of biological agents including polymers, bacteria, and fungi, has received great scientific attention as it helps to avoid the toxic by-products of conventional techniques and enhances eco-friendly wastewater treatment approaches. This book discusses the different treatment technologies with a special focus on the green adsorption approach, using biological and hybrid biochemical treatment technologies to prevent water contamination and maintain the ecosystem. It discusses the analysis of organic and inorganic pollutants from industrial wastewater. It also focuses on the removal and recovery of organic and inorganic contaminants from the environment and several case studies describing the removal and recovery of environmental pollutants using green technology are given. The recycling of low-cost along with green adsorbent technology is explained in detail. Finally, the book highlights treatment technologies with effective pollutant removal capacities that are used in modern water treatment units. Audience The book will serve as an important resource for materials scientists, chemists, chemical engineers, biotechnologists, textile engineers and environmental scientists. It will also be valuable to industrial organizations, consulting engineering companies, etc. for the selection and implementation of the most sustainable wastewater treatment technologies.

Download or read book Advanced Applications of Ionic Liquids written by Jamal Akhter Siddique and published by Elsevier. This book was released on 2022-11-02 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Applications of Ionic Liquids discusses the intersection of nanotechnology with ionic liquids (ILs) and materials, along with opportunities for advanced engineering applications in various research fields. Novel materials at nano scales with ILs creates an upsurge in the thermal and electrochemical constancy of the nano scale particles, making them ideal for industrial applications. The implementation of ILs at nano scale includes an interaction of constituents, which is beneficial for electron transfer reactions. These new composites can be implemented as sensors, electronics, catalysts and photonics. Including ILs in polymer composites enhance electrochemical consistency, govern particle size, upsurge conductivity, reduce toxicity, and more. This book is a comprehensive reference for researchers working with IL based technologies for environmental and energy applications. - Covers all industrial aspects and advanced applications of ionic liquids (ILs) - Discusses the advanced applications of ILs across multiple fields, including industrial chemistry and chemical engineering - Includes a discussion of the use of ionic liquids in functional polymers, with applications for catalysis, energy conservation, sensors, and more

Download or read book Inorganic Organic Composites for Water and Wastewater Treatment written by Eric Lichtfouse and published by Springer Nature. This book was released on 2021-12-03 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume on ''Inorganic-Organic Composites for Water and Wastewater Treatment'' reviews research findings on advanced materials and methods for purification. Considering the fact that new emerging pollutants are released into the environment and water bodies, it is necessary to develop more advanced techniques in order to treat them. The utilization of metal – organic framework in view of applications, synthesis, properties like adsorption, characterization of the electronic and geometric aspects, and hybrid systems is reiewed in this book, and the advantages/disadvantages, shortcomings including future prospects associated with metal-based nanoparticles and nanocomposites for water decontamination are discussed. In addition, the use of carbon quantum dots, supramolecular ion-exchange resins, multifunctional composite aerogels, algal biomass valorization and titania-containing composites in treatment processes are also presented.

Download or read book Advanced Materials for Sustainable Environmental Remediation written by Dimitrios A Giannakoudakis and published by Elsevier. This book was released on 2022-04-26 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Materials for Sustainable Environmental Remediation: Terrestrial and Aquatic Environments presents detailed, comprehensive coverage of novel and advanced materials that can be applied to address the growing global concern of the pollution of natural resources in waters, the air and soil. It provides fundamental knowledge on available materials and treatment processes, as well as applications, including adsorptive remediation and catalytic remediation. Organized clearly by type of material, this book presents a consistent structure for each chapter, including characteristics of the materials, basic and important physicochemical features for environmental remediation applications, routes of synthesis, recent advances as remediation medias, and future perspectives. This book offers an interdisciplinary and practical examination of available materials and processes for environmental remediation that will be valuable to environmental scientists, materials scientists, environmental chemists, and environmental engineers alike. Highlights a wide range of synthetic methodologies, physicochemical and engineered features of novel materials and composites/hybrids for environmental purposes Provides comprehensive, consolidated coverage of advanced materials for environmental remediation applications for researchers in environmental science, materials science, and industry to identify in-depth solutions to pollution Presents up-to-date details of advanced materials, including descriptions and characteristics that impact their applications in environmental remediation processes

Download or read book Nanocellulose written by Mainak Mukhopadhyay and published by John Wiley & Sons. This book was released on 2024-03-06 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: NANOCELLULOSE This book provides the latest up-to-date information on the exciting applications of nanocellulose in human diseases by giving in-depth explanations of their synthesis, characterization, and real-world applications in the biomedical sectors. Nanocellulose is a promising nanomaterial with unique qualities including low cost, durability, non-toxicity, accessibility, etc. Cellulose can be classified into two types: nanocrystals and nanofibrils, depending on the way it is extracted from trees, plants, or other cellulose-containing species. Textiles, cosmetics, and food products are just a few of the commercial uses for nanocellulose. However, it also has strong potential for use in medicine. The book presents the most recent scientific research on nanocellulose as a biopolymer and its potential uses in medicine. The reader will discover: explains the synthesis of bacterial nanocellulose from different bacterial species and their characteristics; details processes and applications of electrospinning and the synthesis of novel nanocellulose-based nanocomposite materials; discusses the various surface functionalization processes of cellulose and their advantages and disadvantages; delves into the application of nanocellulose in tissue engineering and grafting, such as in wound dressing and implants; discusses nanocellulose as a carrier for drug delivery, as well as the synthesis of antibacterial nanocomposites for treating multi-drug-resistant bacteria; explores the role of nanocellulose in the treatment of renal failure, nanocellulose hydrogel for ophthalmic and dental applications. Audience Researchers in areas including environmental biotechnology, bioprocess engineering, renewable energy, chemical engineering, nanotechnology, biotechnology, and microbiology will be interested in this book.

Download or read book Aerogels for Energy Saving and Storage written by Meldin Mathew and published by John Wiley & Sons. This book was released on 2024-07-23 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the energy storage applications of a wide variety of aerogels made from different materials In Aerogels for Energy Saving and Storage, an expert team of researchers delivers a one-stop resource covering the state-of-the-art in aerogels for energy applications. The book covers their morphology, properties, and processability and serves as a valuable resource for researchers and professionals working in materials science and environmentally friendly energy and power technology. The authors offer a comprehensive review of highly efficient energy applications of aerogels that bridges the gap between engineering, science, and chemistry and advances the field of materials development. They provide a Life Cycle Assessment of aerogels in energy systems, as well as discussions of their impact on the environment. Aerogel synthesis, characterization, fabrication, morphology, properties, energy-related applications, and simulations are all explored, and likely future research directions are provided. Readers will also find: A thorough introduction to aerogels in energy, including state-of-the-art advancements and challenges newly encountered Comprehensive explorations of chitin-based and cellulose-derived aerogels, as well as lignin-, clay-, and carbon nanotube-based aerogels Practical discussions of organic, natural, and inorganic aerogels, with further analyses of the lifecycle of aerogels In-depth examinations of the theory, modeling, and simulation of aerogels Perfect for chemical and environmental engineers, Aerogels for Energy Saving and Storage will also earn a place in the libraries of chemistry and materials science researchers in academia and industry.

Download or read book Life Cycle Assessment of Aerogel Manufacture on Small and Large Scales written by Osman Karatum and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent studies demonstrated that advanced aerogel composites (Aspen Aerogels® Spaceloft® [SL]) have the potential to transform oil remediation via high oil uptake capacity and selectivity, excellent reusability, and high mechanical strength. Understanding the life cycle environmental impacts of advanced aerogels can enable a more holistic decision-making process when considering oil recovery technologies following a spill. Here, we perform a cradle-to-grave streamlined life cycle assessment (LCA) following International Organization for Standardization (ISO) 14040 2006 for SL weighed against the conventional oil sorbent material, polyurethane foam. The model included alternative use and disposal scenarios, such as single or multiple uses, and landfill, incinerator, and waste-to-energy (WTE) approaches for cleaning 1 cubic meter (m3) of light crude oil. Results showed that the ideal case for SL application was comprised of multiple use and WTE incineration (68% reduction in material use, approximately 7 × 103 megajoules [MJ] of energy recovery from WTE), but SL offered energy and materials savings even when used once and disposed of via traditional means (i.e., landfill). In addition to evaluating these already-scaled processes, we performed an anticipatory LCA for the laboratory-scaled aerogel fabrication process that might inform the sustainable design of next-generation aerogels. In particular, the model compared rapid supercritical extraction (RSCE) with two conventional supercritical extraction methods--alcohol and carbon dioxide supercritical extraction (ASCE and CSCE, respectively)--for silica aerogel monoliths. Our results showed that RSCE yielded a cumulative energy savings of more than 76 × 103 and 100 × 103 MJ for 1 m3 of monolithic silica aerogel manufacturing compared to ASCE and CSCE, respectively.

Download or read book Novel Materials for Environmental Remediation Applications written by Dimitrios A Giannakoudakis and published by Elsevier. This book was released on 2022-10-01 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel Materials for Environmental Remediation Applications: Adsorption and Beyond presents detailed, comprehensive coverage of novel and advanced materials that can be applied to address the growing global concern of the pollution of natural resources in water, the air, and in soil. The book provides up-to-date knowledge of state-of-the-art materials and treatment processes, as well as details of applications, including adsorptive remediation and catalytic remediation. Chapters include the characteristics of materials, basic and important physicochemical features for environmental remediation applications, routes of synthesis, recent advances as remediation medias and future perspectives. This book offers an interdisciplinary and practical examination of novel materials and processes for environmental remediation that will be valuable to environmental scientists, materials scientists, environmental chemists, and environmental engineers alike. - Highlights a wide range of synthetic methodologies, physicochemical and engineered features of novel materials, and composites/hybrids for environmental purposes - Presents applications of adsorbents or catalysts for water/wastewater treatment and air purification technologies such as advanced oxidation processes, adsorption, photocatalysis, coagulation, flotation, membrane separation, filtration, and others - Provides comprehensive, consolidated coverage of novel materials for environmental remediation applications for researchers in environmental science, materials science, and industry to identify in-depth solutions to pollution

Download or read book Cellulose Reinforced Nanofibre Composites written by Mohammad Jawaid and published by Woodhead Publishing. This book was released on 2017-06-06 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cellulose-Reinforced Nanofibre Composites: Production, Properties and Applications presents recent developments in, and applications of, nanocellulose as reinforcement in composite and nanocomposite materials. Written by leading experts, the book covers properties and applications of nanocellulose, including the production of nanocellulose from different biomass resources, the usefulness of nanocellulose as a reinforcement for polymer and paper, and major challenges for successful scale-up production in the future. The chapters draw on cutting-edge research on the use of nanosized cellulose reinforcements in polymer composites that result in advanced material characteristics and significant enhancements in physical, mechanical and thermal properties. The book presents an up-to-date review of the major innovations in the field of nanocellulose and provides a reference material for future research in biomass based composite materials, which is timely due to the sustainable, recyclable and eco-friendly demand for highly innovative materials made from biomass. This book is an ideal source of information for scientific and industrial researchers working in materials science. - Gathers together a broad spectrum of research on nanocellulose, with emphasis on the outstanding reinforcing potential when nanocellulose is included into a polymer matrix or as an additive to paper - Demonstrates systematic approaches and investigations from processing, design, characterization and applications of nanocellulose - Presents a useful reference and technical guide for nanocomposite materials R&D sectors, university academics and postgraduate students (Masters and PhD) and industrialists working in material commercialization