Download or read book Principles of Abrasive Processing written by Milton Clayton Shaw and published by Oxford University Press on Demand. This book was released on 1996 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grinding is one of the most important operations employed in production engineering to remove unwanted material and to introduce desired geometry and surface properties. Once considered only a secondary finishing operation, grinding is now more widely employed as suggested by the term, "abrasive machining." The approach to grinding taken here is to consider the basic processes in fundamental terms rather than to attempt to present a large mass of empirical results. Thus, the emphasis is placed on why things occur as they do rather than on specific solutions to problems ordinarily met. The rationale for this approach is that it better enables an engineer in the workshop to find solutions to new and unusual problems.
Download or read book Advances in Abrasive Based Machining and Finishing Processes written by S. Das and published by Springer Nature. This book was released on 2020-05-10 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the advances in abrasive based machining and finishing in broad sense. Specifically, the book covers the novel machining and finishing strategies implemented in various advanced machining processes for improving machining accuracy and overall quality of the product. This book presents the capability of advanced machining processes using abrasive grain. It also covers ways for enhancing the production rate as well as quality. It fulfills the gap between the production of any complicated components and successful machining with abrasive particles.
Download or read book Tribology of Abrasive Machining Processes written by Ioan D. Marinescu and published by William Andrew. This book was released on 2012-12-07 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book draws upon the science of tribology to understand, predict and improve abrasive machining processes. Pulling together information on how abrasives work, the authors, who are renowned experts in abrasive technology, demonstrate how tribology can be applied as a tool to improve abrasive machining processes. Each of the main elements of the abrasive machining system are looked at, and the tribological factors that control the efficiency and quality of the processes are described. Since grinding is by far the most commonly employed abrasive machining process, it is dealt with in particular detail. Solutions are posed to many of the most commonly experienced industrial problems, such as poor accuracy, poor surface quality, rapid wheel wear, vibrations, work-piece burn and high process costs. This practical approach makes this book an essential tool for practicing engineers. Uses the science of tribology to improve understanding and of abrasive machining processes in order to increase performance, productivity and surface quality of final products A comprehensive reference on how abrasives work, covering kinematics, heat transfer, thermal stresses, molecular dynamics, fluids and the tribology of lubricants Authoritative and ground-breaking in its first edition, the 2nd edition includes 30% new and updated material, including new topics such as CMP (Chemical Mechanical Polishing) and precision machining for micro-and nano-scale applications
Download or read book Advances in Abrasive Processes written by Xi Peng Xu and published by Trans Tech Publications Ltd. This book was released on 2001-06-27 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Extensive research during the past 30 years has provided a relatively complete understanding of the many diverse aspects of abrasive processes which are suitable for the final machining of components that require smooth surfaces and precise tolerances. Although widely used in industry, abrasive treatments remain perhaps the least understood of all machining processes. Advances in the field of abrasive processes are therefore of great fundamental and practical interest.
Download or read book Machining with Abrasives written by Mark J. Jackson and published by Springer Science & Business Media. This book was released on 2010-11-03 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abrasive machining is one of the most important processes used in manufacturing engineering to remove unwanted material and to obtain the desired geometry and surface quality. Abrasive machining processes are processes where material is removed from a work piece using a multitude of hard angular abrasive particles or grains which may or may not be bonded to form a tool. Abrasive Machining discusses the fundamentals and advances in the abrasive machining processes, and provides a complete overview of the newly developing areas in the field including but not limited to, high efficiency deep grinding and micro and nanogrinding.
Download or read book Advances in Grinding and Abrasive Processes written by Xi Peng Xu and published by Trans Tech Publications Ltd. This book was released on 2004-03-15 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present volume contains selected papers from the 12th Grinding and Machining Conference, held in China (GMC 2003). Volume is indexed by Thomson Reuters CPCI-S (WoS). This collection presents a selection of over 250 papers, submitted to the conference by many universities and industrial concerns. All of the papers were subjected to peer-review by at least two expert referees. Moreover, fifteen papers on high-speed machining were specially selected by Dr. Ning He, a full professor at Nanjing University of Aeronautics and Astronautics (NUAA), from papers submitted to the International Conference on High Speed Machining, which is organized by the NUAA and will be held in Nanjing from March 31st to April 2nd, 2004. These papers have been selected for the present volume because of their quality and the fact that they cover the main topics of the conference.
Download or read book Advances in Abrasive Technology XVI written by Julong Yuan and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS).Abrasive machining is one kind of old technology, but it has a far-reaching impact on a broad spectrum of industries. In particular modern manufacturing, there is an ever increasing demand of advanced abrasive technology and other precision abrasive technology. The collection brings together both academic researchers and practitioners from around the world for interchange of the latest developments.The 123 papers are grouped as follows: 1: Abrasive Jet Machining; 2: Abrasive Machining; 3: Advanced Cutting Technology; 4: Brittle Material Machining; 5: CMP and Silicon Wafer Processing; 6: Coolants and Cooling; 7: Design, Fabrication and Analysis of Devices for the Applications of Abrasive Technologies; 8: EDM, Ultrasonic Machining, and Laser Machining; 9: Finishing, Lapping and Polishing; 10: Glass Molding and Related Topics; 11: Grinding Wheel and Abrasive Grain Technologies; 12: In-Process Measurement and Monitoring, Metrology; 13: Machine Tools and Systems, Tooling Processing; 14: Micro/Nano-Machining; 15: Surface Integrity and Materials Characterization; 16: Tribology in Manufacturing; 17: Truing, Dressing and ELID.
Download or read book Alloy Materials and Their Allied Applications written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-06-16 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloy Materials and Their Allied Applications provides an in-depth overview of alloy materials and applications. The 11 chapters focus on the fabrication methods and design of corrosion-resistant, magnetic, biodegradable, and shape memory alloys. The industrial applications in the allied areas, such as biomedical, dental implants, abrasive finishing, surface treatments, photocatalysis, water treatment, and batteries, are discussed in detail. This book will help readers solve fundamental and applied problems faced in the field of allied alloys applications.
Download or read book Advances in Abrasive Technology IX written by Dong Ming Guo and published by Trans Tech Publications Ltd. This book was released on 2007-01-15 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a wealth of valuable up-to-date information for active researchers and engineers, and will certainly form a solid basis for any future research, in the field of abrasive technology, which is aimed at creating new and practical machine tools, systems and processes, or at identifying new characteristics.
Download or read book Nontraditional Machining Processes written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2013-06-14 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nontraditional machining employs processes that remove material by various methods involving thermal, electrical, chemical and mechanical energy or even combinations of these. Nontraditional Machining Processes covers recent research and development in techniques and processes which focus on achieving high accuracies and good surface finishes, parts machined without burrs or residual stresses especially with materials that cannot be machined by conventional methods. With applications to the automotive, aircraft and mould and die industries, Nontraditional Machining Processes explores different aspects and processes through dedicated chapters. The seven chapters explore recent research into a range of topics including laser assisted manufacturing, abrasive water jet milling and hybrid processes. Students and researchers will find the practical examples and new processes useful for both reference and for developing further processes. Industry professionals and materials engineers will also find Nontraditional Machining Processes to be a source of ideas and processes for development and industrial application.
Download or read book Advances in Abrasive Technology XIV written by Taghi Tawakoli and published by Trans Tech Publications Ltd. This book was released on 2011-08-22 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Abrasive technology is the most important aspect of precision technology. A total of 117 full-color papers are to be found in this book. Developments in precision turning, milling, and drilling, machining of difficult-to-cut materials, such as chromium-nickel alloys, titanium alloys, carbides and ceramics, and glass are addressed. In addition, special processes of precision technology, including polishing, lapping, jet-machining, magnetic finishing, micro and nano-machining, machine-tool design, silicon wafers and spinning, are presented. This work is a handy guide to the state of the art.
Download or read book Advances in Abrasive Technology XIII written by Yunn-Shiuan Liao and published by Trans Tech Publications. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS).Abrasive machining is one of the oldest technologies, and continues to have a far-reaching impact on a broad spectrum of industries. In particular, there is an ever-increasing demand by modern manufacturing for advanced abrasive techniques and other precision machining technologies. As well as abrasive-related technologies, electrical discharge machining (EDM), glass molding, machine tool systems, green manufacturing, laser-beam machining, tribology, advanced cutting methods, etc. are addressed here. The more than 167 presentations contributed by workers from all over the world will make this volume essential reading. The annual conferences allow academic researchers and industrial practitioners to trade insights and questions regarding abrasive machining and its applications. Nearly 200 selected and peer-reviewed papers from the latest sitting consider such areas as abrasive jet machining, advanced cutting technology, brittle material machining, chemical mechanical polishing and silicon wafer processing, coolants and cooling, ultrasonic machining and laser machining, eco-machining, glass molding, grinding wheel and abrasive grain technologies, high-speed and high-efficiency machining, in-process measurement and monitoring, metrology, machine tools and systems, tooling processing, micro-machining and nano-machining, surface integrity and materials characterization, tribology in manufacturing, and other topics. Most of the papers include high quality monochrome illustrations.
Download or read book Advances in Abrasive Technology XV written by Y.F. Zhang and published by Trans Tech Publications Ltd. This book was released on 2012-09-28 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This book brings together the latest developments in, and applications of, abrasive technology. The topics covered include: grinding and grinding wheels, truing and dressing techniques for grinding wheels, finishing, lapping, honing and polishing, abrasive-jet machining, advances in machining technologies, micro/nano-fabrication, as well as other novel technologies and advanced studies relevant to abrasive technology and precision manufacturing. This work will represent an invaluable reference source for professionals in the precision manufacturing field who wish to keep abreast of state-of-the-art developments in abrasive technology and who are interested in understanding further the fundamentals of this discipline.
Download or read book Tribology and Fundamentals of Abrasive Machining Processes written by Bahman Azarhoushang and published by William Andrew. This book was released on 2021-11-10 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition draws upon the fundamentals of abrasive machining processes and the science of tribology to understand, predict, and improve abrasive machining processes. Each of the main elements of the abrasive machining system is looked at alongside the tribological factors that control the efficiency and quality of the processes described. The new edition has been updated to include a variety of industrial applications. Grinding and conditioning of grinding tools are dealt with in particular detail, and solutions are proposed for many of the most commonly experienced industrial problems, such as poor accuracy, poor surface quality, rapid tool wear, vibrations, workpiece burn, and high process costs. The entire book has been rewritten and restructured, with ten completely new chapters. Other new features include: Extensive explanations of the main abrasive machining processes such as grinding (including reciprocating and creep-feed grinding, high-speed high-efficiency deep grinding, external and internal cylindrical grinding, and centerless grinding), honing, superfinishing, lapping, polishing, and finishing Discussions of the new classes of abrasives, abrasive tools, and bonding materials New case studies and troubleshooting on the most common grinding practices New coverage on grinding tool conditioning, mechanical dressing, and nonmechanical dressing processes Detailed explanations of the effects of process input parameters (such as cutting parameters, workpiece material and geometry, and abrasive tools) on process characteristics, workpiece quality, tool wear, and process parameters (such as cutting forces and temperature as well as achievable material removal rate) Updated topics regarding process fluids for abrasive machining and fluid delivery
Download or read book Grinding Technology written by Stephen Malkin and published by Industrial Press Inc.. This book was released on 2008 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a comprehensive treatment of grinding theory and its practical utilization, this edition focuses on grinding as a machining process using bonded abrasive grinding wheels as the cutting medium. It provides a description of abrasives and bonded abrasive cutting tools.
Download or read book Advances in Abrasive Processes written by Xipeng Xu and published by . This book was released on 2001 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensive research during the past 30 years has provided a relatively complete understanding of the many diverse aspects of abrasive processes which are suitable for the final machining of components that require smooth surfaces and precise tolerances. Although widely used in industry, abrasive treatments remain perhaps the least understood of all machining processes. Advances in the field of abrasive processes are therefore of great fundamental and practical interest.
Download or read book Machines Advances and Trends in Non conventional Abrasive and Precision Machining written by Mariusz Deja and published by MDPI. This book was released on 2021-09-03 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work included in this book pertains to advanced abrasive and nonconventional machining processes. These processes are at the forefront of modern technology, with significant practical significance. Their importance is also made clear by the case studies that are included in the research that is presented in the book, pertaining to important materials and high-end applications. However, the particularities of these manufacturing processes need to be further investigated and the processes themselves need to be optimized. This is conducted in the presented works with significant experimental and modeling work, incorporating modern tools of analysis and measurements.
