Download or read book ADVANCED TOPICS IN NEURAL NETWORKS WITH MATLAB PARALLEL COMPUTING OPTIMIZE AND TRAINING written by PEREZ C. and published by CESAR PEREZ. This book was released on 2023-12-13 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neural networks are inherently parallel algorithms. Multicore CPUs, graphical processing units (GPUs), and clusters of computers with multiple CPUs and GPUs can take advantage of this parallelism. Parallel Computing Toolbox, when used in conjunction with Neural Network Toolbox, enables neural network training and simulation to take advantage of each mode of parallelism. Parallel Computing Toolbox allows neural network training and simulation to run across multiple CPU cores on a single PC, or across multiple CPUs on multiple computers on a network using MATLAB Distributed Computing Server. Using multiple cores can speed calculations. Using multiple computers can allow you to solve problems using data sets too big to fit in the RAM of a single computer. The only limit to problem size is the total quantity of RAM available across all computers. Distributed and GPU computing can be combined to run calculations across multiple CPUs and/or GPUs on a single computer, or on a cluster with MATLAB Distributed Computing Server. It is desirable to determine the optimal regularization parameters in an automated fashion. One approach to this process is the Bayesian framework. In this framework, the weights and biases of the network are assumed to be random variables with specified distributions. The regularization parameters are related to the unknown variances associated with these distributions. You can then estimate these parameters using statistical techniques. It is very difficult to know which training algorithm will be the fastest for a given problem. It depends on many factors, including the complexity of the problem, the number of data points in the training set, the number of weights and biases in the network, the error goal, and whether the network is being used for pattern recognition (discriminant analysis) or function approximation (regression). This book compares the various training algorithms. One of the problems that occur during neural network training is called overfitting. The error on the training set is driven to a very small value, but when new data is presented to the network the error is large. The network has memorized the training examples, but it has not learned to generalize to new situations. This book develops the following topics: Neural Networks with Parallel and GPU Computing Deep Learning Optimize Neural Network Training Speed and Memory Improve Neural Network Generalization and Avoid Overfitting Create and Train Custom Neural Network Architectures Deploy Training of Neural Networks Perceptron Neural Networks Linear Neural Networks Hopfield Neural Network Neural Network Object Reference Neural Network Simulink Block Library Deploy Neural Network Simulink Diagrams

Download or read book Advenced Neural Networks With Matlab written by L. Abell and published by Createspace Independent Publishing Platform. This book was released on 2017-05-29 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: MATLAB Neural Network Toolbox provides algorithms, pretrained models, and apps to create, train, visualize, and simulate both shallow and deep neural networks. You can perform classification, regression, clustering, dimensionality reduction, time-series forecasting, and dynamic system modeling and control. Deep learning networks include convolutional neural networks (ConvNets, CNNs) and autoencoders for image classification, regression, and feature learning. For small training sets, you can quickly apply deep learning by performing transfer learning with pretrained deep networks. To speed up training on large datasets, you can use Parallel Computing Toolbox to distribute computations and data across multicore processors and GPUs on the desktop, and you can scale up to clusters and clouds (including Amazon EC2(R) P2 GPU instances) with MATLAB(R) Distributed Computing Server. The Key Features developed in this book are de next: - Deep learning with convolutional neural networks (for classification and regression) and autoencoders (for feature learning) - Transfer learning with pretrained convolutional neural network models - Training and inference with CPUs or multi-GPUs on desktops, clusters, and clouds - Unsupervised learning algorithms, including self-organizing maps and competitive layers - Supervised learning algorithms, including multilayer, radial basis, learning vector quantization (LVQ), time-delay, nonlinear autoregressive (NARX), and recurrent neural network (RNN) - Preprocessing, postprocessing, and network visualization for improving training efficiency and assessing network performance

Download or read book Neural Network Architectures Examples Using MATLAB written by J. Smith and published by Createspace Independent Publishing Platform. This book was released on 2017-02-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: MATLAB has the tool Neural Network Toolbox that provides algorithms, functions, and apps to create, train, visualize, and simulate neural networks. You can perform classification, regression, clustering, dimensionality reduction, time-series forecasting, and dynamic system modeling and control. The toolbox includes convolutional neural network and autoencoder deep learning algorithms for image classification and feature learning tasks. To speed up training of large data sets, you can distribute computations and data across multicore processors, GPUs, and computer clusters using Parallel Computing Toolbox. The more important features are the following: - Deep learning, including convolutional neural networks and autoencoders - Parallel computing and GPU support for accelerating training (with Parallel Computing Toolbox) - Supervised learning algorithms, including multilayer, radial basis, learning vector quantization (LVQ), time-delay, nonlinear autoregressive (NARX), and recurrent neural network (RNN) - Unsupervised learning algorithms, including self-organizing maps and competitive layers - Apps for data-fitting, pattern recognition, and clustering - Preprocessing, postprocessing, and network visualization for improving training efficiency and assessing network performance - Simulink(R) blocks for building and evaluating neural networks and for control systems applications Neural networks are composed of simple elements operating in parallel. These elements are inspired by biological nervous systems. As in nature, the connections between elements largely determine the network function. You can train a neural network to perform a particular function by adjusting the values of the connections (weights) between elements.

Download or read book Neural Networks Applications and Examples Using MATLAB written by J. Smith and published by Createspace Independent Publishing Platform. This book was released on 2017-02-24 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: MATLAB has the tool Neural Network Toolbox that provides algorithms, functions, and apps to create, train, visualize, and simulate neural networks. You can perform classification, regression, clustering, dimensionality reduction, time-series forecasting, and dynamic system modeling and control. The toolbox includes convolutional neural network and autoencoder deep learning algorithms for image classification and feature learning tasks. To speed up training of large data sets, you can distribute computations and data across multicore processors, GPUs, and computer clusters using Parallel Computing Toolbox. The more important features are the following: *Deep learning, including convolutional neural networks and autoencoders *Parallel computing and GPU support for accelerating training (with Parallel Computing Toolbox) *Supervised learning algorithms, including multilayer, radial basis, learning vector quantization (LVQ), time-delay, nonlinear autoregressive (NARX), and recurrent neural network (RNN) *Unsupervised learning algorithms, including self-organizing maps and competitive layers *Apps for data-fitting, pattern recognition, and clustering *Preprocessing, postprocessing, and network visualization for improving training efficiency and assessing network performance *Simulink(r) blocks for building and evaluating neural networks and for control systems applications

Download or read book Neural Networks by Examples Using Matlab written by F. Marques and published by . This book was released on 2017-02-06 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Neural networks theory is inspired from the natural neural network of human nervous system. Is possible define a neural network as a computing system made up of a number of simple, highly interconnected processing elements, which process information by their dynamic state response to external inputs. MATLAB Neural Network Toolbox provides algorithms, functions, and apps to create, train, visualize, and simulate neural networks. You can perform classification, regression, clustering, dimensionality reduction, time-series forecasting, and dynamic system modeling and control. The toolbox includes convolutional neural network and autoencoder deep learning algorithms for image classification and feature learning tasks. To speed up training of large data sets, you can distribute computations and data across multicore processors, GPUs, and computer clusters using MATLAB Parallel Computing Toolbox.

Download or read book Neural Networks Time Series Using Matlab written by K. Taylor and published by Createspace Independent Publishing Platform. This book was released on 2017-02-19 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: MATLAB has the tool Neural Network Toolbox that provides algorithms, functions, and apps to create, train, visualize, and simulate neural networks. You can perform classification, regression, clustering, dimensionality reduction, time-series forecasting, and dynamic system modeling and control. The toolbox includes convolutional neural network and autoencoder deep learning algorithms for image classification and feature learning tasks. To speed up training of large data sets, you can distribute computations and data across multicore processors, GPUs, and computer clusters using Parallel Computing Toolbox. The more important features are the following: -Deep learning, including convolutional neural networks and autoencoders -Parallel computing and GPU support for accelerating training (with Parallel Computing Toolbox) -Supervised learning algorithms, including multilayer, radial basis, learning vector quantization (LVQ), time-delay, nonlinear autoregressive (NARX), and recurrent neural network (RNN) -Unsupervised learning algorithms, including self-organizing maps and competitive layers -Apps for data-fitting, pattern recognition, and clustering -Preprocessing, postprocessing, and network visualization for improving training efficiency and assessing network performance -Simulink(R) blocks for building and evaluating neural networks and for control systems applications this book develops Neural Networkd Time series using MATLAB

Download or read book Segmentation with Matlab Clustering with Neural Networks written by C. Perez and published by Independently Published. This book was released on 2019-03-20 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: MATLAB has the tool Neural Network Toolbox or Deep Learning Tools that provides algorithms, functions, and apps to create, train, visualize, and simulate neural networks. You can perform classification, regression, clustering, dimensionality reduction, time-series forecasting, and dynamic system modeling and control.The toolbox includes convolutional neural network and autoencoder deep learning algorithms for image classification and feature learning tasks. To speed up training of large data sets, you can distribute computations and data across multicore processors, GPUs, and computer clusters using Parallel Computing Toolbox.The more important features are the following: -Deep learning, including convolutional neural networks and autoencoders-Parallel computing and GPU support for accelerating training (with Parallel Computing Toolbox) -Supervised learning algorithms, including multilayer, radial basis, learning vector quantization (LVQ), time-delay, nonlinear autoregressive (NARX), and recurrent neural network (RNN)-Unsupervised learning algorithms, including self-organizing maps and competitive layers-Apps for data-fitting, pattern recognition, and clustering

Download or read book Speed Neural Network A Formula Handbook written by N.B. Singh and published by N.B. Singh. This book was released on with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Speed Neural Network: A Formula Handbook" is a compact yet comprehensive resource designed to aid both beginners and experts in understanding and implementing neural networks efficiently. Packed with essential formulas and techniques, this handbook covers topics such as network architecture, activation functions, optimization algorithms, and training methodologies. Whether you're a data scientist, researcher, or enthusiast, this book provides quick access to the tools and insights needed to build and optimize neural networks for a variety of tasks, making it an indispensable companion in the realm of machine learning and artificial intelligence.

Download or read book Machining Recent Advances Applications and Challenges written by Luis Norberto L´opez de Lacalle and published by MDPI. This book was released on 2019-08-26 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue Machining—Recent Advances, Applications and Challenges is intended as a humble collection of some of the hottest topics in machining. The manufacturing industry is a varying and challenging environment where new advances emerge from one day to another. In recent years, new manufacturing procedures have retained increasing attention from the industrial and scientific community. However, machining still remains the key operation to achieve high productivity and precision for high-added value parts. Continuous research is performed, and new ideas are constantly considered. This Special Issue summarizes selected high-quality papers which were submitted, peer-reviewed, and recommended by experts. It covers some (but not only) of the following topics: High performance operations for difficult-to-cut alloys, wrought and cast materials, light alloys, ceramics, etc.; Cutting tools, grades, substrates and coatings. Wear damage; Advanced cooling in machining: Minimum quantity of lubricant, dry or cryogenics; Modelling, focused on the reduction of risks, the process outcome, and to maintain surface integrity; Vibration problems in machines: Active and passive/predictive methods, sources, diagnosis and avoidance; Influence of machining in new concepts of machine–tool, and machine static and dynamic behaviors; Machinability of new composites, brittle and emerging materials; Assisted machining processes by high-pressure, laser, US, and others; Introduction of new analytics and decision making into machining programming. We wish to thank the reviewers and staff from Materials for their comments, advice, suggestions and invaluable support during the development of this Special Issue.

Download or read book Neural Networks Using Matlab Cluster Analysis and Classification written by K. Taylor and published by Createspace Independent Publishing Platform. This book was released on 2017-02-17 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: MATLAB has the tool Neural Network Toolbox that provides algorithms, functions, and apps to create, train, visualize, and simulate neural networks. You can perform classification, regression, clustering, dimensionality reduction, time-series forecasting, and dynamic system modeling and control. The toolbox includes convolutional neural network and autoencoder deep learning algorithms for image classification and feature learning tasks. To speed up training of large data sets, you can distribute computations and data across multicore processors, GPUs, and computer clusters using Parallel Computing Toolbox. The more important features are the following: -Deep learning, including convolutional neural networks and autoencoders -Parallel computing and GPU support for accelerating training (with Parallel Computing Toolbox) -Supervised learning algorithms, including multilayer, radial basis, learning vector quantization (LVQ), time-delay, nonlinear autoregressive (NARX), and recurrent neural network (RNN) -Unsupervised learning algorithms, including self-organizing maps and competitive layers -Apps for data-fitting, pattern recognition, and clustering -Preprocessing, postprocessing, and network visualization for improving training efficiency and assessing network performance -Simulink(R) blocks for building and evaluating neural networks and for control systems applications This book develops cluster analysis and classification tecniques using neural networks

Download or read book Network and Parallel Computing written by Ching-Hsien Hsu and published by Springer. This book was released on 2014-08-23 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 11th IFIP WG 10.3 International Conference on Network and Parallel Computing, NPC 2014, held in Ilan, Taiwan, in September 2014. The 42 full papers and 24 poster papers presented were carefully reviewed and selected from 196 submissions. They are organized in topical sections on systems, networks, and architectures, parallel and multi-core technologies, virtualization and cloud computing technologies, applications of parallel and distributed computing, and I/O, file systems, and data management.

Download or read book Advances in Time Domain Computational Electromagnetic Methods written by Qiang Ren and published by John Wiley & Sons. This book was released on 2022-11-15 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Time-Domain Computational Electromagnetic Methods Discover state-of-the-art time domain electromagnetic modeling and simulation algorithms Advances in Time-Domain Computational Electromagnetic Methods delivers a thorough exploration of recent developments in time domain computational methods for solving complex electromagnetic problems. The book discusses the main time domain computational electromagnetics techniques, including finite-difference time domain (FDTD), finite-element time domain (FETD), discontinuous Galerkin time domain (DGTD), time domain integral equation (TDIE), and other methods in electromagnetic, multiphysics modeling and simulation, and antenna designs. The book bridges the gap between academic research and real engineering applications by comprehensively surveying the full picture of current state-of-the-art time domain electromagnetic simulation techniques. Among other topics, it offers readers discussions of automatic load balancing schemes for DG-FETD/SETD methods and convolution quadrature time domain integral equation methods for electromagnetic scattering. Advances in Time-Domain Computational Electromagnetic Methods also includes: Introductions to cylindrical, spherical, and symplectic FDTD, as well as FDTD for metasurfaces with GSTC and FDTD for nonlinear metasurfaces Explorations of FETD for dispersive and nonlinear media and SETD-DDM for periodic/ quasi-periodic arrays Discussions of TDIE, including explicit marching-on-in-time solvers for second-kind time domain integral equations, TD-SIE DDM, and convolution quadrature time domain integral equation methods for electromagnetic scattering Treatments of deep learning, including time domain electromagnetic forward and inverse modeling using a differentiable programming platform Ideal for undergraduate and graduate students studying the design and development of various kinds of communication systems, as well as professionals working in these fields, Advances in Time-Domain Computational Electromagnetic Methods is also an invaluable resource for those taking advanced graduate courses in computational electromagnetic methods and simulation techniques.

Download or read book Spatially Explicit Hyperparameter Optimization for Neural Networks written by Minrui Zheng and published by Springer Nature. This book was released on 2021-10-18 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neural networks as the commonly used machine learning algorithms, such as artificial neural networks (ANNs) and convolutional neural networks (CNNs), have been extensively used in the GIScience domain to explore the nonlinear and complex geographic phenomena. However, there are a few studies that investigate the parameter settings of neural networks in GIScience. Moreover, the model performance of neural networks often depends on the parameter setting for a given dataset. Meanwhile, adjusting the parameter configuration of neural networks will increase the overall running time. Therefore, an automated approach is necessary for addressing these limitations in current studies. This book proposes an automated spatially explicit hyperparameter optimization approach to identify optimal or near-optimal parameter settings for neural networks in the GIScience field. Also, the approach improves the computing performance at both model and computing levels. This book is written for researchers of the GIScience field as well as social science subjects.

Download or read book An Introduction to Optimization written by Edwin K. P. Chong and published by John Wiley & Sons. This book was released on 2011-09-23 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise from the Second Edition "...an excellent introduction to optimization theory..." (Journal of Mathematical Psychology, 2002) "A textbook for a one-semester course on optimization theory and methods at the senior undergraduate or beginning graduate level." (SciTech Book News, Vol. 26, No. 2, June 2002) Explore the latest applications of optimization theory and methods Optimization is central to any problem involving decision making in many disciplines, such as engineering, mathematics, statistics, economics, and computer science. Now, more than ever, it is increasingly vital to have a firm grasp of the topic due to the rapid progress in computer technology, including the development and availability of user-friendly software, high-speed and parallel processors, and networks. Fully updated to reflect modern developments in the field, An Introduction to Optimization, Third Edition fills the need for an accessible, yet rigorous, introduction to optimization theory and methods. The book begins with a review of basic definitions and notations and also provides the related fundamental background of linear algebra, geometry, and calculus. With this foundation, the authors explore the essential topics of unconstrained optimization problems, linear programming problems, and nonlinear constrained optimization. An optimization perspective on global search methods is featured and includes discussions on genetic algorithms, particle swarm optimization, and the simulated annealing algorithm. In addition, the book includes an elementary introduction to artificial neural networks, convex optimization, and multi-objective optimization, all of which are of tremendous interest to students, researchers, and practitioners. Additional features of the Third Edition include: New discussions of semidefinite programming and Lagrangian algorithms A new chapter on global search methods A new chapter on multipleobjective optimization New and modified examples and exercises in each chapter as well as an updated bibliography containing new references An updated Instructor's Manual with fully worked-out solutions to the exercises Numerous diagrams and figures found throughout the text complement the written presentation of key concepts, and each chapter is followed by MATLAB exercises and drill problems that reinforce the discussed theory and algorithms. With innovative coverage and a straightforward approach, An Introduction to Optimization, Third Edition is an excellent book for courses in optimization theory and methods at the upper-undergraduate and graduate levels. It also serves as a useful, self-contained reference for researchers and professionals in a wide array of fields.

Download or read book Advanced Machine Learning using Python Programming written by SOHARA BANU A R and published by MileStone Research Publications. This book was released on 2023-07-13 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE AUTHOR(S) AND PUBLISHER OF THIS BOOK HAVE USED THEIR BEST EFFORTS IN PREPARING THIS BOOK. THESE EFFORTS INCLUDE THE DEVELOPMENT, RESEARCH ANDTESTING OF THE THEORIES AND PROGRAMS TO DETERMINE THEIR EFFECTIVENESS. THE AUTHORS AND PUBLISHER MAKES NO WARRANTY OF ANY KIND, EXPRESSED OR IMPLIEDWITH REGARD TO THESE PROGRAMS OR THE DOCUMENTATION CONTAINED IN THIS BOOK. THE AUTHORS AND PUBLISHER SHALL NOT BE LIABLE IN ANY EVENT FORINCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH, OR ARISING OUT OF, THE FURNISHING, PERFORMANCE, OR USE OF THESE PROGRAMS. COPYRIGHTS © 2023 BY MILESTONE RESEARCH PUBLICATIONS, INC. THIS EDITION IS PUBLISHED BY ARRANGEMENT WITH MILESTONE RESEARCH FOUNDATION, INC. THIS BOOK IS SOLD SUBJECT TO THE CONDITION THAT IT SHALL NOT, BY WAY OF TRADE OR OTHERWISE, BE LENT, RESOLD, HIRED OUT, OR OTHERWISE CIRCULATED WITHOUTTHE PUBLISHER'S PRIOR WRITTEN CONSENT IN ANY FORM OF BINDING OR COVER OTHER THAN THAT IN WHICH IT IS PUBLISHED AND WITHOUT A SIMILAR CONDITIONINCLUDING THIS CONDITION BEING IMPOSED ON THE SUBSEQUENT PURCHASER AND WITHOUT LIMITING THE RIGHTS UNDER COPYRIGHT RESERVED ABOVE, NO PART OF THISPUBLICATION MAY BE REPRODUCED, STORED IN OR INTRODUCED INTO RETRIEVAL SYSTEM, OR TRANSMITTED IN ANY FORM OR BY ANY MEANS (ELECTRONIC, MECHANICAL,PHOTOCOPYING, RECORDING AND OTHERWISE) WITHOUT THE PRIOR WRITTEN PERMISSION OF BOTH THE COPYRIGHT OWNER AND THE ABOVE MENTIONED PUBLISHER OFTHIS BOOK.

Download or read book Neural Networks and Learning Algorithms in MATLAB written by Ardashir Mohammadazadeh and published by Springer Nature. This book was released on 2022-12-10 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the basic concepts, theory and applications of neural networks in a simple unified approach with clear examples and simulations in the MATLAB programming language. The scripts herein are coded for general purposes to be easily extended to a variety of problems in different areas of application. They are vectorized and optimized to run faster and be applicable to high-dimensional engineering problems. This book will serve as a main reference for graduate and undergraduate courses in neural networks and applications. This book will also serve as a main basis for researchers dealing with complex problems that require neural networks for finding good solutions in areas, such as time series prediction, intelligent control and identification. In addition, the problem of designing neural network by using metaheuristics, such as the genetic algorithms and particle swarm optimization, with one objective and with multiple objectives, is presented.

Download or read book Neural Networks Using Matlab Function Approximation and Regression written by K. Taylor and published by Createspace Independent Publishing Platform. This book was released on 2017-02-09 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: MATLAB has the tool Neural Network Toolbox that provides algorithms, functions, and apps to create, train, visualize, and simulate neural networks. You can perform classification, regression, clustering, dimensionality reduction, time-series forecasting, and dynamic system modeling and control. The toolbox includes convolutional neural network and autoencoder deep learning algorithms for image classification and feature learning tasks. To speed up training of large data sets, you can distribute computations and data across multicore processors, GPUs, and computer clusters using Parallel Computing Toolbox. The more important features are the following: -Deep learning, including convolutional neural networks and autoencoders -Parallel computing and GPU support for accelerating training (with Parallel Computing Toolbox) -Supervised learning algorithms, including multilayer, radial basis, learning vector quantization (LVQ), time-delay, nonlinear autoregressive (NARX), and recurrent neural network (RNN) -Unsupervised learning algorithms, including self-organizing maps and competitive layers -Apps for data-fitting, pattern recognition, and clustering -Preprocessing, postprocessing, and network visualization for improving training efficiency and assessing network performance -Simulink(R) blocks for building and evaluating neural networks and for control systems applications This book delves into the applications of neural networks to fit functions and regression models