Download or read book Advanced Technology Assisted Problem Solving in Engineering Education Emerging Research and Opportunities written by Sidhu, Manjit Singh and published by IGI Global. This book was released on 2019-10-25 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Visual multimedia applications integrate animation, sound, graphics, and video to create an engaging, interactive, and effective learning environment. Such software allows students to exercise more control over the pacing and sequencing of their own learning. With the availability of more sophisticated computers, the potential to employ multimedia has grown tremendously. Advanced Technology-Assisted Problem Solving in Engineering Education: Emerging Research and Opportunities is a critical scholarly publication that examines the development and use of interactive multimedia and mixed reality applications that are used to support engineering pedagogy and curriculum. Containing leading international findings, this advanced publication delivers quality research using learning and consultancy for developing tactics to decipher dilemmas within the field. Highlighting a range of topics such as data analysis, augmented reality, and multimedia, this book is ideal for educators, engineers, curriculum designers, educational software developers, IT consultants, researchers, academicians, and students.
Download or read book Engineering Education and Practice in the United States written by National Research Council and published by National Academies Press. This book was released on 1985-01-01 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Panel on Technology Education was one of four panels established by the Committee on the Education and Utilization of the Engineer of the National Research Council. This panel's task was to investigate the technology aspects of the preparation of engineers in the United States. This report deals with: (1) "The History of Technical Institutes"; (2) "Engineering Technology and Industrial Technology"; (3) "Engineering Technology and Engineering"; (4) "Engineering Technology Education"; (5) "Cooperative Education and Engineering Technology"; (6) "Accreditation, Certification, and Licensing"; (7) "Manpower Considerations"; (8) "The Impact of High Technology"; and (9) "Allocating Resources for Engineering Technology." An executive summary provides a set of recommendations developed as a part of the panel's work. (TW)
Download or read book Engineering Technology Education in the United States written by National Academy of Engineering and published by National Academies Press. This book was released on 2017-01-27 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vitality of the innovation economy in the United States depends on the availability of a highly educated technical workforce. A key component of this workforce consists of engineers, engineering technicians, and engineering technologists. However, unlike the much better-known field of engineering, engineering technology (ET) is unfamiliar to most Americans and goes unmentioned in most policy discussions about the US technical workforce. Engineering Technology Education in the United States seeks to shed light on the status, role, and needs of ET education in the United States.
Download or read book Global Advances in Engineering Education written by J.P. Mohsen and published by CRC Press. This book was released on 2019-05-03 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The engineering profession is at a critical juncture that requires reforming engineering education. The supply of engineers is declining whereas the nature of the demand is changing. Formulating a response to these challenges demands the adoption of new and innovative tools and methods for promoting the expansion of the community while supporting these evolving requirements. Initiatives to entice and retain students are being employed to support growth objectives. Modern technologies are reshaping reform efforts. This book discusses the state of affairs in the field of engineering education and presents practical steps for addressing the challenges in order to march toward a brighter future. Features Covers the latest state of engineering education in the North America, Europe, Middle East, North Africa, and Far East Asia Discusses advances in science, technology, engineering, and mathematics and community engagement Outlines applications of digital technologies to enhance learning Provides advances in remote and online instructions for engineering education Presents discussions on innovation, leadership, and ethics
Download or read book Technology and Tools in Engineering Education written by Prathamesh P. Churi and published by CRC Press. This book was released on 2021-10-27 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the innovative and research methods of the teaching-learning process in Engineering field. It focuses on the use of technology in the field of education. It also provides a platform to academicians and educationalists to share their ideas and best practices. The book includes specific pedagogy used in engineering education. It offers case studies and classroom practices which also include those used in distance mode and during the COVID-19 pandemic. It provides comparisons of national and international accreditation bodies, directions on cost-effective technology, and it discusses advanced technologies such as VR and augmented reality used in education. This book is intended for research scholars who are pursuing their masters and doctoral studies in the engineering education field as well as teachers who teach undergraduate and postgraduate courses to engineering students.
Download or read book Training Engineering Students for Modern Technological Advancement written by Alves, Anabela Carvalho and published by IGI Global. This book was released on 2021-12-17 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering education leads the preparation of the next generation of engineers. This is a difficult task as engineering practices rapidly evolve, pressured by the technological advancements promoted by these same engineers. Engineering schools are integrated into large and rigid higher education institutions (HEI) that are not known for their agility. Nevertheless, engineering educators must have the agility to go beyond HEI boundaries to close the gap between professional practice needs and engineering education. Training Engineering Students for Modern Technological Advancement examines the role of engineering teachers in preparing the next generation of engineers and presents perspectives on active learning methods for engineering education. As such, it contributes to bypassing the compartmentalized way of course organization typical in many HEIs and prepares for more agile engineering education. Covering topics such as game-based teaching methods, Industry 4.0, and management skills, this book is a dynamic resource ideal for engineers, engineering professors, engineering students, general educators, engineering professionals, academicians, and researchers.
Download or read book Educating the Engineer of 2020 written by National Academy of Engineering and published by National Academies Press. This book was released on 2005-10-06 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Educating the Engineer of 2020 is grounded by the observations, questions, and conclusions presented in the best-selling book The Engineer of 2020: Visions of Engineering in the New Century. This new book offers recommendations on how to enrich and broaden engineering education so graduates are better prepared to work in a constantly changing global economy. It notes the importance of improving recruitment and retention of students and making the learning experience more meaningful to them. It also discusses the value of considering changes in engineering education in the broader context of enhancing the status of the engineering profession and improving the public understanding of engineering. Although certain basics of engineering will not change in the future, the explosion of knowledge, the global economy, and the way engineers work will reflect an ongoing evolution. If the United States is to maintain its economic leadership and be able to sustain its share of high-technology jobs, it must prepare for this wave of change.
Download or read book Engineering Education Trends in the Digital Era written by SerdarAsan, ?eyda and published by IGI Global. This book was released on 2020-02-21 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the most influential activity for social and economic development of individuals and societies, education is a powerful means of shaping the future. The emergence of physical and digital technologies requires an overhaul that would affect not only the way engineering is approached but also the way education is delivered and designed. Therefore, designing and developing curricula focusing on the competencies and abilities of new generation engineers will be a necessity for sustainable success. Engineering Education Trends in the Digital Era is a critical scholarly resource that examines more digitized ways of designing and delivering learning and teaching processes and discusses and acts upon developing innovative engineering education within global, societal, economic, and environmental contexts. Highlighting a wide range of topics such as academic integrity, gamification, and professional development, this book is essential for teachers, researchers, educational policymakers, curriculum designers, educational software developers, administrators, and academicians.
Download or read book Advanced Technology for Engineering Education Workshop Proceedings written by and published by . This book was released on 1998 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Infusing Real World Experiences into Engineering Education written by AMD NextGen Engineer and published by National Academies Press. This book was released on 2012-11-15 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this report is to encourage enhanced richness and relevance of the undergraduate engineering education experience, and thus produce better-prepared and more globally competitive graduates, by providing practical guidance for incorporating real world experience in US engineering programs. The report, a collaborative effort of the National Academy of Engineering (NAE) and Advanced Micro Devices, Inc. (AMD), builds on two NAE reports on The Engineer of 2020 that cited the importance of grounding engineering education in real world experience. This project also aligns with other NAE efforts in engineering education, such as the Grand Challenges of Engineering, Changing the Conversation, and Frontiers of Engineering Education. This publication presents 29 programs that have successfully infused real world experiences into engineering or engineering technology undergraduate education. The Real World Engineering Education committee acknowledges the vision of AMD in supporting this project, which provides useful exemplars for institutions of higher education who seek model programs for infusing real world experiences in their programs. The NAE selection committee was impressed by the number of institutions committed to grounding their programs in real world experience and by the quality, creativity, and diversity of approaches reflected in the submissions. A call for nominations sent to engineering and engineering technology deans, chairs, and faculty yielded 95 high-quality submissions. Two conditions were required of the nominations: (1) an accredited 4-year undergraduate engineering or engineering technology program was the lead institutions, and (2) the nominated program started operation no later than the fall 2010 semester. Within these broad parameters, nominations ranged from those based on innovations within a single course to enhancements across an entire curriculum or institution. Infusing Real World Experiences into Engineering Education is intended to provide sufficient information to enable engineering and engineering technology faculty and administrators to assess and adapt effective, innovative models of programs to their own institution's objectives. Recognizing that change is rarely trivial, the project included a brief survey of selected engineering deans concern in the adoption of such programs.
Download or read book Educating the Engineer of 2020 written by National Academy of Engineering and published by National Academies Press. This book was released on 2005-11-06 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Educating the Engineer of 2020 is grounded by the observations, questions, and conclusions presented in the best-selling book The Engineer of 2020: Visions of Engineering in the New Century. This new book offers recommendations on how to enrich and broaden engineering education so graduates are better prepared to work in a constantly changing global economy. It notes the importance of improving recruitment and retention of students and making the learning experience more meaningful to them. It also discusses the value of considering changes in engineering education in the broader context of enhancing the status of the engineering profession and improving the public understanding of engineering. Although certain basics of engineering will not change in the future, the explosion of knowledge, the global economy, and the way engineers work will reflect an ongoing evolution. If the United States is to maintain its economic leadership and be able to sustain its share of high-technology jobs, it must prepare for this wave of change.
Download or read book Engineering in K 12 Education written by National Research Council and published by National Academies Press. This book was released on 2009-10-08 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering education in K-12 classrooms is a small but growing phenomenon that may have implications for engineering and also for the other STEM subjects-science, technology, and mathematics. Specifically, engineering education may improve student learning and achievement in science and mathematics, increase awareness of engineering and the work of engineers, boost youth interest in pursuing engineering as a career, and increase the technological literacy of all students. The teaching of STEM subjects in U.S. schools must be improved in order to retain U.S. competitiveness in the global economy and to develop a workforce with the knowledge and skills to address technical and technological issues. Engineering in K-12 Education reviews the scope and impact of engineering education today and makes several recommendations to address curriculum, policy, and funding issues. The book also analyzes a number of K-12 engineering curricula in depth and discusses what is known from the cognitive sciences about how children learn engineering-related concepts and skills. Engineering in K-12 Education will serve as a reference for science, technology, engineering, and math educators, policy makers, employers, and others concerned about the development of the country's technical workforce. The book will also prove useful to educational researchers, cognitive scientists, advocates for greater public understanding of engineering, and those working to boost technological and scientific literacy.
Download or read book Holistic Engineering Education written by Domenico Grasso and published by Springer Science & Business Media. This book was released on 2010-03-01 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Holistic Engineering Education: Beyond Technology is a compilation of coordinated and focused essays from world leaders in the engineering profession who are dedicated to a transformation of engineering education and practice. The contributors define a new and holistic approach to education and practice that captures the creativity, interdisciplinarity, complexity, and adaptability required for the profession to grow and truly serve global needs. With few exceptions today, engineering students and professionals continue to receive a traditional, technically-based education and training using curriculum models developed for early 20th century manufacturing and machining. While this educational paradigm has served engineering well, helping engineers create awe-inspiring machines and technologies for society, the coursework and expectations of most engineering programs eschew breadth and intellectual exploration to focus on consistent technological precision and study. Why this dichotomy? While engineering will always need precise technological skill, the 21st century innovation economy demands a new professional perspective that recognizes the value of complex systems thinking, cross-disciplinary collaborations, economic and environmental impacts (sustainability), and effective communication to global and community leaders, thus enabling engineers to consider "the whole patient" of society's needs. The goal of this book is to inspire, lead, and guide this critically needed transformation of engineering education. "Holistic Engineering Education: Beyond Technology points the way to a transformation of engineering education and practice that will be sufficiently robust, flexible, and systems-oriented to meet the grand challenges of the 21st century with their ever-increasing scale, complexity, and transdisciplinary nature." -- Charles Vest, President, National Academy of Engineering; President Emeritus, MIT "This collection of essays provides compelling arguments for the need of an engineering education that prepares engineers for the problems of the 21st century. Following the National Academy’s report on the Engineer of 2020, this book brings together experts who make the case for an engineering profession that looks beyond developing just cool technologies and more into creating solutions that can address important problems to benefit real people." -- Linda Katehi, Chancellor, University of California at Davis "This superb volume offers a provocative portrait of the exciting future of engineering education...A dramatically new form of engineering education is needed that recognizes this field as a liberal art, as a profession that combines equal parts technical rigor and creative design...The authors challenge the next generation to engineering educators to imagine, think and act in new ways. " -- Lee S. Shulman, President Emeritus, The Carnegie Foundation for the Advancement of Teaching and Charles E. Ducommun Professor of Education Emeritus, Stanford University
Download or read book Advanced Technology for Engineering Education written by and published by . This book was released on 1998 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Engineer of 2020 written by National Academy of Engineering and published by National Academies Press. This book was released on 2004-06-14 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: To enhance the nation's economic productivity and improve the quality of life worldwide, engineering education in the United States must anticipate and adapt to the dramatic changes of engineering practice. The Engineer of 2020 urges the engineering profession to recognize what engineers can build for the future through a wide range of leadership roles in industry, government, and academia-not just through technical jobs. Engineering schools should attract the best and brightest students and be open to new teaching and training approaches. With the appropriate education and training, the engineer of the future will be called upon to become a leader not only in business but also in nonprofit and government sectors. The book finds that the next several decades will offer more opportunities for engineers, with exciting possibilities expected from nanotechnology, information technology, and bioengineering. Other engineering applications, such as transgenic food, technologies that affect personal privacy, and nuclear technologies, raise complex social and ethical challenges. Future engineers must be prepared to help the public consider and resolve these dilemmas along with challenges that will arise from new global competition, requiring thoughtful and concerted action if engineering in the United States is to retain its vibrancy and strength.
Download or read book Advanced Technology for Engineering Education written by Ahmed K. Noor and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Capacity for Teaching Engineering in K 12 Education written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-03-13 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering education is emerging as an important component of US K-12 education. Across the country, students in classrooms and after- and out-of-school programs are participating in hands-on, problem-focused learning activities using the engineering design process. These experiences can be engaging; support learning in other areas, such as science and mathematics; and provide a window into the important role of engineering in society. As the landscape of K-12 engineering education continues to grow and evolve, educators, administrators, and policy makers should consider the capacity of the US education system to meet current and anticipated needs for K-12 teachers of engineering. Building Capacity for Teaching Engineering in K-12 Education reviews existing curricula and programs as well as related research to understand current and anticipated future needs for engineering-literate K-12 educators in the United States and determine how these needs might be addressed. Key topics in this report include the preparation of K-12 engineering educators, professional pathways for K-12 engineering educators, and the role of higher education in preparing engineering educators. This report proposes steps that stakeholders - including professional development providers, postsecondary preservice education programs, postsecondary engineering and engineering technology programs, formal and informal educator credentialing organizations, and the education and learning sciences research communities - might take to increase the number, skill level, and confidence of K-12 teachers of engineering in the United States.