Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2018-01-12 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.

Download or read book Advanced Manufacturing Systems and Technology written by E. Kuljanic and published by Springer. This book was released on 2014-05-04 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, based on the Fourth International Conference on Advanced Manufacturing Systems and Technology - AMST '96 aims at presenting trend and up-to-date information on the latest developments - research results and industrial experience in the field of machining processes, optimization and process planning, forming, flexible machining systems, non conventional machining, robotics and control, measuring and quality, thus providing an international forum for a beneficial exchange of ideas, and furthering a favourable cooperation between research and industry.

Download or read book Introduction to Advanced Manufacturing written by Ramy Harik and published by SAE International. This book was released on 2019-07-24 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Advanced Manufacturing was written by two experienced and passionate engineers whose mission is to make the subject of advanced manufacturing easy to understand and a practical solution to everyday problems. Harik, Ph.D. and Wuest, Ph.D., professors who have taught the subject for decades, combined their expertise to develop both an applied manual and a theoretical reference that addresses many different needs. Introduction to Advanced Manufacturing covers the following topics in detail: • Composites Manufacturing • Smart Manufacturing • Additive Manufacturing • Computer Aided Manufacturing • Polymers Manufacturing • Assembly Processes • Manufacturing Quality Control and Productivity • Subtractive Manufacturing • Deformative Manufacturing Introduction to Advanced Manufacturing offers a new, refreshing way of studying how things are made in the digital age. With academics and industry professionals in mind, Introduction to Advanced Manufacturing paves the ground for those interested in the new opportunities of Industry 4.0.

Download or read book Design of Advanced Manufacturing Systems written by Andrea Matta and published by Springer Science & Business Media. This book was released on 2005-04-25 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a framework and specific methods and tools for the selection and configuration of the capacity of Advanced Manufacturing Systems (AMS). AMS include Flexible Manufacturing Systems, Dedicated Manufacturing Systems, and Reconfigurable Manufacturing Systems. Starting from the characteristic of the competitive environment, the directions given by the company strategy, data regarding the products, and information regarding the different system architectures, the decision support system described here aids the decision maker by means of a formalized methodology that follows the various steps required to define the type and timing of 'capacity' acquisition and to define the detailed configuration of AMS along its life cycle. The decision making framework and tools illustrated in this volume combine decision-making theory, optimization theory, discrete event simulation and queuing networks. It will be of interest to graduate students and researchers involved in manufacturing engineering, industrial engineering and operations research.

Download or read book Advanced Manufacturing Technology for Medical Applications written by Ian Gibson and published by John Wiley & Sons. This book was released on 2006-06-14 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced manufacturing technologies (AMTs) combine novel manufacturing techniques and machines with the application of information technology, microelectronics and new organizational practices within the manufacturing sector. They include "hard" technologies such as rapid prototyping, and "soft" technologies such as scanned point cloud data manipulation. AMTs contribute significantly to medical and biomedical engineering. The number of applications is rapidly increasing, with many important new products now under development. Advanced Manufacturing Technology for Medical Applications outlines the state of the art in advanced manufacturing technology and points to the future development of this exciting field. Early chapters look at actual medical applications already employing AMT, and progress to how reverse engineering allows users to create system solutions to medical problems. The authors also investigate how hard and soft systems are used to create these solutions ready for building. Applications follow where models are created using a variety of different techniques to suit different medical problems One of the first texts to be dedicated to the use of rapid prototyping, reverse engineering and associated software for medical applications Ties together the two distinct disciplines of engineering and medicine Features contributions from experts who are recognised pioneers in the use of these technologies for medical applications Includes work carried out in both a research and a commercial capacity, with representatives from 3 companies that are established as world leaders in the field – Medical Modelling, Materialise, & Anatomics Covers a comprehensive range of medical applications, from dentistry and surgery to neurosurgery and prosthetic design Medical practitioners interested in implementing new advanced methods will find Advanced Manufacturing Technology for Medical Applications invaluable as will engineers developing applications for the medical industry. Academics and researchers also now have a vital resource at their disposal.

Download or read book Nature Inspired Optimization in Advanced Manufacturing Processes and Systems written by Ganesh M. Kakandikar and published by CRC Press. This book was released on 2020-12-08 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing system is going through substantial changes and developments in light of Industry 4.0. Newer manufacturing technologies are being developed and applied. There is a need to optimize these techniques when applied in different circumstances with respect to materials, tools, product configurations, and process parameters. This book covers computational intelligence applied to manufacturing. It discusses nature-inspired optimization of processes and their design and development in manufacturing systems. It explores all manufacturing processes, at both macro and micro levels, and offers manufacturing philosophies. Nonconventional manufacturing, real industry problems and case studies, research on generative processes, and relevance of all this to Industry 4.0 is also included. Researchers, students, academicians, and industry professionals will find this reference title very useful.

Download or read book Design for Advanced Manufacturing Technologies and Processes written by LaRoux K. Gillespie and published by McGraw Hill Professional. This book was released on 2017-05-12 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-edge coverage of the new processes, materials, and technologies that are revolutionizing the manufacturing industry Expertly edited by a past president of the Society of Manufacturing Engineers, this state-of-the-art resource picks up where the bestselling Design for Manufacturability Handbook left off. Within its pages, readers will find detailed, clearly written coverage of the materials, technologies, and processes that have been developed and adopted in the manufacturing industry over the past sixteen years. More than this, the book also includes hard-to-find technical guidance and application information that can be used on the job to actually apply these cutting-edge processes and technologies in a real-world setting. Essential for manufacturing engineers and designers, Design for Advanced Manufacturing is enhanced by a host of international contributors, making the book a true global resource. • Information on the latest technologies and processes such as 3-D printing, nanotechnology, laser cutting, prototyping, additive manufacturing, and CAD/CAM software tools • Coverage of new materials including nano, smart, and shape-memory alloys, in steels, glass, plastics, and composites

Download or read book Changeable and Reconfigurable Manufacturing Systems written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2008-11-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Changeable and Reconfigurable Manufacturing Systems” discusses key strategies for success in the changing manufacturing environment. Changes can often be anticipated but some go beyond the design range, requiring innovative change enablers and adaptation mechanisms. The book presents the new concept of Changeability as an umbrella framework that encompasses paradigms such as agility, adaptability, flexibility and reconfigurability. It provides the definitions and classification of key terms in this new field, and emphasizes the required physical/hard and logical/soft change enablers. The book presents cutting edge technologies and the latest research, as well as future directions to help manufacturers stay competitive. It contains original contributions and results from senior international experts, together with industrial applications. The book serves as a comprehensive reference for professional engineers, managers, and academics in manufacturing, industrial and mechanical engineering.

Download or read book Advanced Models for Manufacturing Systems Management written by A Villa and published by CRC Press. This book was released on 1995-09-19 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the mathematical models applicable to manufacturing systems management, covering problems from production to real time control. It explores manufacturing systems from the viewpoints of both physical structure and performance measures. Two broad classes of mathematical models are covered in detail: Generative models, which yield a set of decision variables optimizing a performance measure, based on mathematical optimization Evaluative models, which evaluate some performance measures as a function of some predefined decision strategy. Within this class Petri Nets and Queueing Networks are discussed. Advanced Models for Manufacturing Systems Management describes dynamic systems modeling by state equations, a unifying framework for a wide variety of models. The text/reference stresses model building, but it examines model solving as well. Computational techniques are illustrated, such as linear programming, branch and bound methods, and dynamic programming. Particular emphasis is given to the development of heuristic methods from mathematical models. The book provides readers with valuable tools for management and design. The use of descriptive models within an optimization algorithm is considered. Numerous examples illustrate theoretical concepts throughout text. Appendices are given at the end of the book in order to recall fundamentals, such as linear programming and graph theory. Appendices also appear within each chapter. In this way, readers can follow the main reading path without getting involved with details; these appendices can be read at a later time. This textual structure makes this book particularly well suited for self-study. Advanced Models for Manufacturing Systems Management is beneficial reading for both students and practitioners.

Download or read book Advanced Manufacturing Techniques for Engineering and Engineered Materials written by Thanigaivelan, R. and published by IGI Global. This book was released on 2022-03-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: As technology advances, it is imperative to stay current in the newest developments made within the engineering industry and within material sciences. Trends in manufacturing such as 3D printing, casting, welding, surface modification, computer numerical control (CNC), non-traditional, Industry 4.0 ergonomics, and hybrid machining methods must be closely examined to utilize these important resources for the betterment of society. Advanced Manufacturing Techniques for Engineering and Engineered Materials provides a unified and complete overview about the recent and emerging trends, developments, and associated technology with scope for the commercialization of techniques specific to manufacturing materials. This book also reviews the various machining methods for difficult-to-cut materials and novel materials including matrix composites. Covering topics such as agro-waste, conventional machining, and material performance, this book is an essential resource for researchers, engineers, technologists, students and professors of higher education, industry workers, entrepreneurs, researchers, and academicians.

Download or read book Effective Resource Management in Manufacturing Systems written by Massimiliano Caramia and published by Springer Science & Business Media. This book was released on 2006-01-09 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing systems, regardless of their size, have to work with scarce resources in dynamic environments. Effective Resource Management in Manufacturing Systems aims to provide methods for achieving effective resource allocation and to solve related problems that occur daily and often generate cost overruns. This book will be bought by postgraduate students of business, engineering and computer science as well as researchers in these fields. It will also be of interest to practitioners in manufacturing systems and operations managers in industry.

Download or read book Industry 4 0 and Advanced Manufacturing written by Amaresh Chakrabarti and published by Springer Nature. This book was released on 2020-10-28 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 1st International Conference on Industry 4.0 and Advanced Manufacturing held at the Indian Institute of Science, Bangalore and includes deliberations from stakeholders in manufacturing and Industry 4.0 on the nature, needs, challenges, opportunities, problems, and solutions in these transformational areas. Special emphasis is placed on exploring avenues for creating a vision of, and enablers for, sustainable, affordable, and human-centric Industry 4.0. The book showcases cutting edge practice, research, and educational innovation in this crucial and rapidly evolving area. This book will be useful to researchers in academia and industry, and will also be useful to policymakers involved in creating ecosystems for implementation of Industry 4.0.

Download or read book Advanced Applications in Manufacturing Engineering written by Mangey Ram and published by Woodhead Publishing. This book was released on 2018-10-29 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Applications in Manufacturing Engineering presents the latest research and development in manufacturing engineering across a range of areas, treating manufacturing engineering on an international and transnational scale. It considers various tools, techniques, strategies and methods in manufacturing engineering applications. With the latest knowledge in technology for engineering design and manufacture, this book provides systematic and comprehensive coverage on a topic that is a key driver in rapid economic development, and that can lead to economic benefits and improvements to quality of life on a large-scale. - Presents the latest research and developments in manufacturing engineering - Covers a comprehensive spread of manufacturing engineering areas for different tasks - Discusses tools, techniques, strategies and methods in manufacturing engineering applications - Considers manufacturing engineering at an international and transnational scale - Enables the reader to learn advanced applications in manufacturing engineering

Download or read book Experiments and Simulations in Advanced Manufacturing written by Panagiotis Kyratsis and published by Springer Nature. This book was released on 2021-04-29 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest advances in manufacturing from both the experimental and simulation point of view. It covers most aspects of manufacturing engineering, i.e. theoretical, analytical, computational and experimental studies. Experimental studies on manufacturing processes require funds, time and expensive facilities, while numerical simulations and mathematical models can improve the efficiency of using the research results. It also provides high level of prediction accuracy and the basis for novel research directions.

Download or read book Advanced Manufacturing Technologies written by Kapil Gupta and published by Springer. This book was released on 2017-04-29 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides details and collective information on working principle, process mechanism, salient features, and unique applications of various advanced manufacturing techniques and processes belong. The book is divided in three sessions covering modern machining methods, advanced repair and joining techniques and, finally, sustainable manufacturing. The latest trends and research aspects of those fields are highlighted.

Download or read book Advanced Manufacturing Technology in China A Roadmap to 2050 written by Tianran Wang and published by Springer Science & Business Media. This book was released on 2012-03-02 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the eighteen field-specific reports comprising the comprehensive scope of the strategic general report of the Chinese Academy of Sciences, this sub-report addresses long-range planning for developing science and technology in the field of advanced manufacturing technology. They each craft a roadmap for their sphere of development to 2050. In their entirety, the general and sub-group reports analyze the evolution and laws governing the development of science and technology, describe the decisive impact of science and technology on the modernization process, predict that the world is on the eve of an impending S&T revolution, and call for China to be fully prepared for this new round of S&T advancement. Based on the detailed study of the demands on S&T innovation in China’s modernization, the reports draw a framework for eight basic and strategic systems of socio-economic development with the support of science and technology, work out China’s S&T roadmaps for the relevant eight basic and strategic systems in line with China’s reality, further detail S&T initiatives of strategic importance to China’s modernization, and provide S&T decision-makers with comprehensive consultations for the development of S&T innovation consistent with China’s reality. Supported by illustrations and tables of data, the reports provide researchers, government officials and entrepreneurs with guidance concerning research directions, the planning process, and investment. Founded in 1949, the Chinese Academy of Sciences is the nation’s highest academic institution in natural sciences. Its major responsibilities are to conduct research in basic and technological sciences, to undertake nationwide integrated surveys on natural resources and ecological environment, to provide the country with scientific data and consultations for government’s decision-making, to undertake government-assigned projects with regard to key S&T problems in the process of socio-economic development, to initiate personnel training, and to promote China’s high-tech enterprises through its active engagement in these areas.

Download or read book Advanced Manufacturing and Automation V written by K. Wang and published by WIT Press. This book was released on 2016-02-03 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Manufacturing and Automation V contains the proceedings of the 5th International Workshop of Advanced Manufacturing and Automation (IWAMA 2015). This meeting continues the success of this important international workshop series and disseminates the works of academic and industrial experts, from around the world, in the areas of advanced manufacturing and automation. The disciplines of manufacturing and automation have attained paramount importance and are vital factors for the maintenance and improvement of the economy of a nation and the quality of life. Manufacturing and automation are advancing at a rapid pace and new technologies are constantly emerging in the fields. The challenges faced by today’s engineers are forcing them to keep on top of the emerging trends through continuous research and development. The papers comprising these proceedings cover various topics including: Robotics and automation; Computational intelligence; Design and optimization; Product life-cycle management; Integration of CAD/CAPP/CAM/CIMS; Advanced manufacturing systems; Manufacturing operations management; Knowledge-based manufacturing; Manufacturing quality control and management; Sustainable production; Diagnosis and prognosis of machines; Lean and agile manufacturing; Virtual and grid manufacturing; Resource and asset management; Logistics and supply chain management; RFID applications; Predictive maintenance; Reliability and maintainability in manufacturing; Project management; Renewable energy development; Environment protection; Intelligent detection.