Download or read book Advanced Studies of Flexible Robotic Manipulators written by Fei-Yue Wang and published by World Scientific. This book was released on 2003 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible robotic manipulators pose various challenges in research as compared to rigid robotic manipulators, ranging from system design, structural optimization, and construction to modeling, sensing, and control. Although significant progress has been made in many aspects over the last one-and-a-half decades, many issues are not resolved yet, and simple, effective, and reliable controls of flexible manipulators still remain an open quest. Clearly, further efforts and results in this area will contribute significantly to robotics (particularly automation) as well as its application and education in general control engineering. To accelerate this process, the leading experts in this important area present in this book the state of the art in advanced studies of the design, modeling, control and applications of flexible manipulators.
Download or read book Advanced Studies of Flexible Robotic Manipulators written by Fei-Yue Wang and published by World Scientific. This book was released on 2003 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible robotic manipulators pose various challenges in research as compared to rigid robotic manipulators, ranging from system design, structural optimization, and construction to modeling, sensing, and control. Although significant progress has been made in many aspects over the last one-and-a-half decades, many issues are not resolved yet, and simple, effective, and reliable controls of flexible manipulators still remain an open quest. Clearly, further efforts and results in this area will contribute significantly to robotics (particularly automation) as well as its application and education in general control engineering. To accelerate this process, the leading experts in this important area present in this book the state of the art in advanced studies of the design, modeling, control and applications of flexible manipulators. Sample Chapter(s). Chapter 1: Flexible-link Manipulators: Modeling, Nonlinear Control and Observer (235 KB). Contents: Flexible-Link Manipulators: Modeling, Nonlinear Control and Observer (M A Arteaga & B Siciliano); Energy-Based Control of Flexible Link Robots (S S Ge); Trajectory Planning and Compliant Control for Two Manipulators to Deform Flexible Materials (O Al-Jarrah et al.); Force Control of Flexible Manipulators (F Matsuno); Experimental Study on the Control of Flexible Link Robots (D Wang); Sensor Output Feedback Control of Flexible Robot Arms (Z-H Luo); On GA Based Robust Control of Flexible Manipulators (Z-Q Xiao & L-L Cui); Analysis of Poles and Zeros for Tapered Link Designs (D L Girvin & W J Book); Optimum Shape Design of Flexible Manipulators with Tip Loads (J L Russell & Y-Q Gao); Mechatronic Design of Flexible Manipulators (P-X Zhou & Z-Q Xiao); A Comprehensive Study of Dynamic Behaviors of Flexible Robotic Links: Modeling and Analysis (Y-Q Gao & F-Y Wang). Readership: Researchers, lecturers and graduate students in robotics & automated systems, electrical & electronic engineering, and industrial engineering
Download or read book Flexible Manipulators written by Yanqing Gao and published by Academic Press. This book was released on 2012-04-16 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Intelligent Systems Series comprises titles that present state-of-the-art knowledge and the latest advances in intelligent systems. Its scope includes theoretical studies, design methods, and real-world implementations and applications. Flexible manipulators play a critical role in applications in a diverse range of fields, such as construction automation, environmental applications, and space engineering. Due to the complexity of the link deformation and dynamics, the research effort on accurate modeling and high performance control of flexible manipulators has increased dramatically in recent years. This book presents analysis, data and insights that will of particular use for researchers and engineers working on the optimization and control of robotic manipulators and automation systems. Government and industry groups have specifically stressed the importance of innovation in robotics, manufacturing automation, and control systems for maintaining innovation and high-value-added manufacturing Discusses the latest research on the quantitative effects of size, shape, mass distribution, tip load, on the dynamics and operational performance of flexible manipulators Presents unique analyses critical to the effective modeling and optimization of manipulators: hard to find data unavailable elsewhere
Download or read book Flexible Robot Manipulators written by M. Osman Tokhi and published by IET. This book was released on 2008-05-20 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest developmens in modelling, simulation and control of flexible robot manipulators. Coverage includes an overall review of previously developed methodologies, a range of modelling approaches including classical techniques, parametric and neuromodelling approaches and numerical modelling/simulation techniques.
Download or read book Flexible Robotics written by Mathieu Grossard and published by John Wiley & Sons. This book was released on 2013-08-05 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to provide those interested in the field of flexible robotics with an overview of several scientific and technological advances in the practical field of robotic manipulation. The different chapters examine various stages that involve a number of robotic devices, particularly those designed for manipulation tasks characterized by mechanical flexibility. Chapter 1 deals with the general context surrounding the design of functionally integrated microgripping systems. Chapter 2 focuses on the dual notations of modal commandability and observability, which play a significant role in the control authority of vibratory modes that are significant for control issues. Chapter 3 presents different modeling tools that allow the simultaneous use of energy and system structuring notations. Chapter 4 discusses two sensorless methods that could be used for manipulation in confined or congested environments. Chapter 5 analyzes several appropriate approaches for responding to the specific needs required by versatile prehension tasks and dexterous manipulation. After a classification of compliant tactile sensors focusing on dexterous manipulation, Chapter 6 discusses the development of a complying triaxial force sensor based on piezoresistive technology. Chapter 7 deals with the constraints imposed by submicrometric precision in robotic manipulation. Chapter 8 presents the essential stages of the modeling, identification and analysis of control laws in the context of serial manipulator robots with flexible articulations. Chapter 9 provides an overview of models for deformable body manipulators. Finally, Chapter 10 presents a set of contributions that have been made with regard to the development of methodologies for identification and control of flexible manipulators based on experimental data. Contents 1. Design of Integrated Flexible Structures for Micromanipulation, Mathieu Grossard, Mehdi Boukallel, Stéphane Régnier and Nicolas Chaillet. 2. Flexible Structures’ Representation and Notable Properties in Control, Mathieu Grossard, Arnaud Hubert, Stéphane Régnier and Nicolas Chaillet. 3. Structured Energy Approach for the Modeling of Flexible Structures, Nandish R. Calchand, Arnaud Hubert, Yann Le Gorrec and Hector Ramirez Estay. 4. Open-Loop Control Approaches to Compliant Micromanipulators, Yassine Haddab, Vincent Chalvet and Micky Rakotondrabe. 5. Mechanical Flexibility and the Design of Versatile and Dexterous Grippers, Javier Martin Amezaga and Mathieu Grossard. 6. Flexible Tactile Sensors for Multidigital Dexterous In-hand Manipulation, Mehdi Boukallel, Hanna Yousef, Christelle Godin and Caroline Coutier. 7. Flexures for High-Precision Manipulation Robots, Reymond Clavel, Simon Henein and Murielle Richard. 8. Modeling and Motion Control of Serial Robots with Flexible Joints, Maria Makarov and Mathieu Grossard. 9. Dynamic Modeling of Deformable Manipulators, Frédéric Boyer and Ayman Belkhiri. 10. Robust Control of Robotic Manipulators with Structural Flexibilities, Houssem Halalchi, Loïc Cuvillon, Guillaume Mercère and Edouard Laroche. About the Authors Mathieu Grossard, CEA LIST, Gif-sur-Yvette, France. Nicolas Chaillet, FEMTO-ST, Besançon, France. Stéphane Régnier, ISIR, UPMC, Paris, France.
Download or read book Flexible Manipulators written by Fei-Yue Wang and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Intelligent Systems Series comprises titles that present state-of-the-art knowledge and the latest advances in intelligent systems. Its scope includes theoretical studies, design methods, and real-world implementations and applications. Flexible manipulators play a critical role in applications in a diverse range of fields, such as construction automation, environmental applications, and space engineering. Due to the complexity of the link deformation and dynamics, the research effort on accurate modeling and high performance control of flexible manipulators has increased dramatically in recent years. This book presents analysis, data and insights that will of particular use for researchers and engineers working on the optimization and control of robotic manipulators and automation systems. Government and industry groups have specifically stressed the importance of innovation in robotics, manufacturing automation, and control systems for maintaining innovation and high-value-added manufacturing Discusses the latest research on the quantitative effects of size, shape, mass distribution, tip load, on the dynamics and operational performance of flexible manipulators Presents unique analyses critical to the effective modeling and optimization of manipulators: hard to find data unavailable elsewhere.
Download or read book Robot Manipulators written by Agustin Jimenez and published by BoD – Books on Demand. This book was released on 2010-03-01 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent research advances in robot manipulators. It offers a complete survey to the kinematic and dynamic modelling, simulation, computer vision, software engineering, optimization and design of control algorithms applied for robotic systems. It is devoted for a large scale of applications, such as manufacturing, manipulation, medicine and automation. Several control methods are included such as optimal, adaptive, robust, force, fuzzy and neural network control strategies. The trajectory planning is discussed in details for point-to-point and path motions control. The results in obtained in this book are expected to be of great interest for researchers, engineers, scientists and students, in engineering studies and industrial sectors related to robot modelling, design, control, and application. The book also details theoretical, mathematical and practical requirements for mathematicians and control engineers. It surveys recent techniques in modelling, computer simulation and implementation of advanced and intelligent controllers.
Download or read book Fractional Modeling and Controller Design of Robotic Manipulators written by Abhaya Pal Singh and published by Springer Nature. This book was released on 2020-10-15 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book at hand is an appropriate addition to the field of fractional calculus applied to control systems. If an engineer or a researcher wishes to delve into fractional-order systems, then this book has many collections of such systems to work upon, and this book also tells the reader about how one can convert an integer-order system into an appropriate fractional-order one through an efficient and simple algorithm. If the reader further wants to explore the controller design for the fractional-order systems, then for them, this book provides a variety of controller design strategies. The use of fractional-order derivatives and integrals in control theory leads to better results than integer-order approaches and hence provides solid motivation for further development of control theory. Fractional-order models are more useful than the integer-order models when accuracy is of paramount importance. Real-time experimental validation of controller design strategies for the fractional-order plants is available. This book is beneficial to the academic institutes for postgraduate and advanced research-level that need a specific textbook on fractional control and its applications in srobotic manipulators. The book is also a valuable teaching and learning resource for undergraduate and postgraduate students.
Download or read book Robust Control Algorithms for Flexible Manipulators written by Kshetrimayum Lochan and published by CRC Press. This book was released on 2024-10-13 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various modelling and control of two-link flexible manipulators are presented in this book. The lumped parameter modelling method and the assumed modes method modelling are comprehensively reviewed. The book also reviews the trajectory tracking problem and tip trajectory tracking problem along with the suppression of tip deflection of the links. An exponential time varying signal and a chaotic signal are considered as the desired trajectories. The identical/ non-identical slave manipulator is synchronised with the controlled master manipulator so that the slave manipulator indirectly follows the desired manipulator.
Download or read book Fractional order Systems and Controls written by Concepción A. Monje and published by Springer Science & Business Media. This book was released on 2010-09-28 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractional-order Systems and Controls details the use of fractional calculus in the description and modeling of systems, and in a range of control design and practical applications. It is largely self-contained, covering the fundamentals of fractional calculus together with some analytical and numerical techniques and providing MATLAB® codes for the simulation of fractional-order control (FOC) systems. Many different FOC schemes are presented for control and dynamic systems problems. Practical material relating to a wide variety of applications is also provided. All the control schemes and applications are presented in the monograph with either system simulation results or real experimental results, or both. Fractional-order Systems and Controls provides readers with a basic understanding of FOC concepts and methods, so they can extend their use of FOC in other industrial system applications, thereby expanding their range of disciplines by exploiting this versatile new set of control techniques.
Download or read book FLEXIBLE MANIPULATORS MODELING ANALYSIS AND OPTIMUM DESIGNS written by Yanqing Gao and published by . This book was released on 2010 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweight robotic manipulators play important roles in many applications, such as construction automation, environmental applications, and space engineering. Due to the complexity of the link deformation, the research effort on accurate modeling and high performance control has increased dramatically in recent years. Very few studies with quantitative results have been reported in the literature on the effect of size, shape, mass distribution, tip load, and other factors on the dynamics and operational performance of flexible manipulators. However, such analyses are critical to the effectiveness of any model for optimization and control purposes. The objective of this dissertation is to provide a unified approach that simultaneously considers all factors in mechanical, electrical, sensing, and control components to address modeling, analysis, optimization, and control of flexible manipulators. A systematic study of various models and comparison their pros and cons with respect to specific design and control problems are developed. Those critical factors mentioned above are addressed with systematic but specific numerical investigations based on the current available dynamic models. Two conventional dual optimal design problems have been well studied in our previous studies. To make those designs useful, complicated constraints that are encountered in reality must be included. In most of those cases, analytical procedures developed before would no longer applicable. New methods for optimal design problems with meaningful constraints are looked into. The complexity of a manipulator system is due to the interrelation and interdependency of its subsystems, for example, its kinematic system control system, driver system, and measuring or sensing system. In traditional design, a manipulator's link structure is designed first, followed by its driver system, then a measuring system, and finally its control system. This leads to a sequential design process and a locally optimal solution, and therefore the potential of a flexible manipulator is rarely fully realized. To overcome such problems, a concurrent design procedure that integrates all subsystems must be under taken, that is, a mechatronic approach must be considered in the design of flexible manipulators.
Download or read book Robust Control Algorithms for Two link Flexible Manipulators written by Kshetrimayum Lochan and published by CRC Press. This book was released on 2024-10-13 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various modelling and control of two-link flexible manipulators are presented in this book. The lumped parameter modelling method and the assumed modes method modelling are comprehensively reviewed. The book also reviews the trajectory tracking problem and tip trajectory tracking problem along with the suppression of tip deflection of the links. An exponential time varying signal and a chaotic signal are considered as the desired trajectories. The identical/ non-identical slave manipulator is synchronised with the controlled master manipulator so that the slave manipulator indirectly follows the desired manipulator.
Download or read book Robot Manipulators written by Marco Ceccarelli and published by IntechOpen. This book was released on 2008-09-01 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book we have grouped contributions in 28 chapters from several authors all around the world on the several aspects and challenges of research and applications of robots with the aim to show the recent advances and problems that still need to be considered for future improvements of robot success in worldwide frames. Each chapter addresses a specific area of modeling, design, and application of robots but with an eye to give an integrated view of what make a robot a unique modern system for many different uses and future potential applications. Main attention has been focused on design issues as thought challenging for improving capabilities and further possibilities of robots for new and old applications, as seen from today technologies and research programs. Thus, great attention has been addressed to control aspects that are strongly evolving also as function of the improvements in robot modeling, sensors, servo-power systems, and informatics. But even other aspects are considered as of fundamental challenge both in design and use of robots with improved performance and capabilities, like for example kinematic design, dynamics, vision integration.
Download or read book Multibody System Dynamics Robotics and Control written by Hubert Gattringer and published by Springer Science & Business Media. This book was released on 2013-01-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume contains 19 contributions by international experts in the field of multibody system dynamics, robotics and control. The book aims to bridge the gap between the modeling of mechanical systems by means of multibody dynamics formulations and robotics. In the classical approach, a multibody dynamics model contains a very high level of detail, however, the application of such models to robotics or control is usually limited. The papers aim to connect the different scientific communities in multibody dynamics, robotics and control. Main topics are flexible multibody systems, humanoid robots, elastic robots, nonlinear control, optimal path planning, and identification.
Download or read book Network based Distributed Planning Using Coevolutionary Algorithms written by Raj Subbu and published by World Scientific. This book was released on 2004 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, efficient and scalable coevolutionary algorithms for distributed, network-based decision-making, which utilize objective functions are developed in a networked environment where internode communications are a primary factor in system performance. A theoretical foundation for this class of coevolutionary algorithms is introduced using techniques from stochastic process theory and mathematical analysis. A case study in distributed, network-based decision-making presents an implementation and detailed evaluation of the coevolutionary decision-making framework that incorporates distributed evolutionary agents and mobile agents. The methodology discussed in this book can have a fundamental impact on the principles and practice of engineering in the distributed, network-based environment that is emerging within and among corporate enterprise systems. In addition, the conceptual framework of the approach to distributed decision systems described may have much wider implications for network-based systems and applications. Contents: Background and Related Work; Problem Formulation and Analysis; Theory and Analysis of Evolutionary Optimization; Theory and Analysis of Distributed Coevolutionary Optimization; Performance Evaluation Based on Ideal Objectives; Coevolutionary Virtual Design Environment; Evaluation and Analysis. Readership: Researchers and engineers in artificial intelligence, evolutionary computation and decision sciences.
Download or read book Multisensor Fusion written by Rajive Joshi and published by World Scientific. This book was released on 1999 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fusion of information from sensors with different physical characteristics, such as sight, touch, sound, etc., enhances the understanding of our surroundings and provides the basis for planning, decision-making, and control of autonomous and intelligent machines. The minimal representation approach to multisensor fusion is based on the use of an information measure as a universal yardstick for fusion. Using models of sensor uncertainty, the representation size guides the integration of widely varying types of data and maximizes the information contributed to a consistent interpretation. In this book, the general theory of minimal representation multisensor fusion is developed and applied in a series of experimental studies of sensor-based robot manipulation. A novel application of differential evolutionary computation is introduced to achieve practical and effective solutions to this difficult computational problem.
Download or read book Intelligent Task Planning Using Fuzzy Petri Nets written by Tom Tiehua Cao and published by World Scientific. This book was released on 1996-08-23 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes an approach to intelligent task planning in a robotic system. Petri net and fuzzy logic are integrated and used to represent task sequence planning and error recovery. During the generation and execution of task plans, different kinds of uncertainties need to be handled to ensure the efficiency and reliability of the system. Following a systematic modeling procedure, a fuzzy Petri net is constructed based on geometric relations, fuzzy variables, and reasoning structures. The resulting net can be used to analyze and control the system. Many examples are discussed to illustrate the theory and the applications of fuzzy Petri nets.