Download or read book Advanced Research on Intelligent System Mechanical Design Engineering and Information Engineering III written by Helen Zhang and published by Trans Tech Publications Ltd. This book was released on 2014-05-28 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2014 3rd International Conference on Intelligent Materials and Mechanical Engineering (MEE 2014), May 24-25, 2014, Guangzhou, China. The 60 papers are grouped as follows: Chapter 1: Intelligent Systems and Control Systems, Chapter 2: Intelligent Technologies and Design in Mechanics and Manufacturing Technological Processes, Chapter 3: Materials Science and Processing, Chapter 4: Environmental and Chemistry Engineering, Chapter 5: Applied Technologies, Networks and Information Engineering, Chapter 6: Computation Methods and Algorithms for Modeling, Simulation and Optimization, Data Mining and Data Processing
Download or read book Advanced Theory and Applications of Engineering Systems Under the Framework of Industry 4 0 written by Yongsheng Ma and published by Springer Nature. This book was released on 2023-03-27 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of selected papers submitted to the 2022 International Conference on Intelligent Systems Design and Engineering Applications organized in Tokyo, Japan, May 13-15, 2022 (ISDEA2022). The book is organized according to the conference’s five major themes, including 1) Theory and Application of Intelligent Computing, 2) Intelligent Information System and Management Decision, 3) Artificial Intelligence and Robots, 4) Mechanical design and intelligent manufacturing and 5) Intelligent control and detection technology. ISDEA establishes a platform for researchers and scholars working in the field of intelligent systems design and engineering applications to present their newest research results, exchange innovative ideas, propose new models, as well as demonstrate advanced methodologies and novel design and systems.
Download or read book Mechanical Engineering Intelligent System and Applied Mechanics written by B. Xu and published by . This book was released on 2014 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Collection of selected, peer reviewed papers from the 2013 International Conference on Mechanical Engineering and Applied Mechanics (MEAM 2013), December 21-22, 2013, Wuhan, China. The 57 papers are grouped as follows: Chapter 1: Research and Design Works in Mechanical Engineering, Chapter 2: Materials and Chemical Technologies, Chapter 3: Control, Intelligent Systems and Information Technology.
Download or read book Integrated Distributed Intelligent Systems for Engineering Design written by Ming Rao and published by CRC Press. This book was released on 1996-11-15 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the philosophy, methodology, techniques, and applications of IDIS for engineering design. Looks at recent research, and details a five-step problem-solving strategy of problem definition, conceptual design, parameter design, design analysis, and design evaluation. Describes industrial applications of IDIS, including the design of a mechanical transmission, a heat exchanger network, and a process control system. For graduate courses on engineering design, artificial intelligence, and computer integrated manufacturing. No index. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Building Intelligent Systems written by Geoff Hulten and published by Apress. This book was released on 2018-03-06 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Produce a fully functioning Intelligent System that leverages machine learning and data from user interactions to improve over time and achieve success. This book teaches you how to build an Intelligent System from end to end and leverage machine learning in practice. You will understand how to apply your existing skills in software engineering, data science, machine learning, management, and program management to produce working systems. Building Intelligent Systems is based on more than a decade of experience building Internet-scale Intelligent Systems that have hundreds of millions of user interactions per day in some of the largest and most important software systems in the world. What You’ll Learn Understand the concept of an Intelligent System: What it is good for, when you need one, and how to set it up for success Design an intelligent user experience: Produce data to help make the Intelligent System better over time Implement an Intelligent System: Execute, manage, and measure Intelligent Systems in practice Create intelligence: Use different approaches, including machine learning Orchestrate an Intelligent System: Bring the parts together throughout its life cycle and achieve the impact you want Who This Book Is For Software engineers, machine learning practitioners, and technical managers who want to build effective intelligent systems
Download or read book Intelligent Systems in Production Engineering and Maintenance written by Anna Burduk and published by Springer. This book was released on 2018-07-31 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a collection of 103 peer-reviewed articles from the Second International Conference on Intelligent Systems in Production Engineering and Maintenance (ISPEM 2018). The conference was organized by the Faculty of Mechanical Engineering and CAMT (Centre for Advanced Manufacturing Technologies), Wrocław University of Science and Technology and was held in Wrocław (Poland) on 17–18 September 2018. The conferences topics included the possibility of using a wide range of intelligent methods in production engineering, presenting and discussing new solutions for innovative plants, research findings and case studies demonstrating advances in production and maintenance from the point of view of Industry 4.0 – particularly applications of intelligent systems, methods and tools in production engineering, maintenance, logistics, quality management, information systems and product development. The book is divided into two parts: the first includes papers related to intelligent systems in production engineering, while the second is dedicated to special sessions focusing on: 1. Computer Aided methods in Production Engineering 2. Mining 4.0 and Intelligent Mining Transportation 3. Modelling and Simulation of Production Processes 4. Multi-Faceted Modelling of Networks and Processes 5. Product Design and Product Manufacturing in Industry 4.0 This book is an excellent source of information for scientists in the field of manufacturing engineering and for top managers in production enterprises.
Download or read book Design Methodology for Intelligent Technical Systems written by Jürgen Gausemeier and published by Springer Science & Business Media. This book was released on 2014-01-28 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent technical systems, which combine mechanical, electrical and software engineering with control engineering and advanced mathematics, go far beyond the state of the art in mechatronics and open up fascinating perspectives. Among these systems are so-called self-optimizing systems, which are able to adapt their behavior autonomously and flexibly to changing operating conditions. Self-optimizing systems create high value for example in terms of energy and resource efficiency as well as reliability. The Collaborative Research Center 614 "Self-optimizing Concepts and Structures in Mechanical Engineering" pursued the long-term aim to open up the active paradigm of self-optimization for mechanical engineering and to enable others to develop self-optimizing systems. This book is directed to researchers and practitioners alike. It provides a design methodology for the development of self-optimizing systems consisting of a reference process, methods, and tools. The reference process is divided into two phases the domain-spanning conceptual design and the domain-specific design and development. For the conceptual design a holistic approach is provided. Domain-specific methods and tools developed especially for the design and development of self-optimizing systems are described and illustrated by application examples. This book will enable the reader to identify the potential for self-optimization and to develop self-optimizing systems independently.
Download or read book Advanced Research on Mechanical Engineering Industry and Manufacturing Engineering written by and published by . This book was released on 2011 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this collection of peer-reviewed papers are to be found many original ideas and new angles on all aspects of Mechanical, Industrial and Manufacturing Engineering. The work is divided into: Chapter 1: Mechanical Engineering, Design and Materials Science, Chapter 2: Materials Engineering, Industry and Manufacturing Engineering, Chapter 3: Intelligent Materials, Information Engineering and Energy Engineering, Chapter 4: Design Science, Materials and Mechanical Manufacturing Technology. A comprehensive and very current guide to the subject matter. Review from Book News Inc.: Over 200 peer-reviewed and selected papers cover mechanical engineering, design, and materials science; material engineering, industry, and manufacturing engineering; intelligent materials, information engineering, and energy engineering; and design science, materials, and mechanical manufacturing technology. Among specific topics are push-based sequence authorization mechanisms for grid security, the transmitting efficiency of supercharged devices, the blind signal separation of strong reverberation based on a new algorithm, applying compliant mechanisms on a polishing robot, a method of software static testing in the presence of runtime exception, and a new controller of stochastic delay systems. The two volumes are paged and indexed together. (Annotation ©2011 Book News Inc. Portland, OR).
Download or read book Progressive and Integrative Ideas and Applications of Engineering Systems under the Framework of IOT and AI written by Yongsheng Ma and published by Springer. This book was released on 2023-11-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of proceedings contains peer reviewed papers presented at 2023 International Conference on Intelligent Systems Design and Engineering Applications which was held in Okayama, Japan, May 12-14, 2023 (ISDEA2023). There are five major sessions covered in this book, including 1) Theory and Application of Artificial Intelligence Technologies in Industry; 2) System Design and Data Analysis within the Context of Internet of Things (IOT) ; 3) System Automation, Control, and Robots; 4) Smart Product Design and Integrated Manufacturing and 5) Sensors, Transducers and detection technology. This conference provides an idea-exchange and discussion platform for the world's engineers and academia to share cutting-edge information, address the hottest issue in intelligent systems design and engineering applications, explore new technologies, exchange and build upon ideas.
Download or read book Interdisciplinary Mechatronics written by M. K. Habib and published by John Wiley & Sons. This book was released on 2013-05-06 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics represents a unifying interdisciplinary and intelligent engineering science paradigm that features an interdisciplinary knowledge area and interactions in terms of the ways of work and thinking, practical experiences, and theoretical knowledge. Mechatronics successfully fuses (but is not limited to) mechanics, electrical, electronics, informatics and intelligent systems, intelligent control systems and advanced modeling, intelligent and autonomous robotic systems, optics, smart materials, actuators and biomedical and biomechanics, energy and sustainable development, systems engineering, artificial intelligence, intelligent computer control, computational intelligence, precision engineering and virtual modeling into a unified framework that enhances the design of products and manufacturing processes. Interdisciplinary Mechatronics concerns mastering a multitude of disciplines, technologies, and their interaction, whereas the science of mechatronics concerns the invention and development of new theories, models, concepts and tools in response to new needs evolving from interacting scientific disciplines. The book includes two sections, the first section includes chapters introducing research advances in mechatronics engineering, and the second section includes chapters that reflects the teaching approaches (theoretical, projects, and laboratories) and curriculum development for under- and postgraduate studies. Mechatronics engineering education focuses on producing engineers who can work in a high-technology environment, emphasize real-world hands-on experience, and engage in challenging problems and complex tasks with initiative, innovation and enthusiasm. Contents: 1. Interdisciplinary Mechatronics Engineering Science and the Evolution of Human Friendly and Adaptive Mechatronics, Maki K. Habib. 2. Micro-Nanomechatronics for Biological Cell Analysis and Assembly, Toshio Fukuda, Masahiro Nakajima, Masaru Takeuchi, Tao Yue and Hirotaka Tajima. 3. Biologically Inspired CPG-Based Locomotion Control System of a Biped Robot Using Nonlinear Oscillators with Phase Resetting, Shinya Aoi. 4. Modeling a Human’s Learning Processes toward Continuous Learning Support System, Tomohiro Yamaguchi, Kouki Takemori and Keiki Takadama. 5. PWM Waveform Generation Using Pulse-Type Hardware Neural Networks, Ken Saito, Minami Takato, Yoshifumi Sekine and Fumio Uchikoba. 6. Parallel Wrists: Limb Types, Singularities and New Perspectives, Raffaele Di Gregorio. 7. A Robot-Assisted Rehabilitation System – RehabRoby, Duygun Erol Barkana and Fatih Özkul. 8. MIMO Actuator Force Control of a Parallel Robot for Ankle Rehabilitation, Andrew Mcdaid, Yun Ho Tsoi and Shengquan Xie. 9. Performance Evaluation of a Probe Climber for Maintaining Wire Rope, Akihisa Tabata, Emiko Hara and Yoshio Aoki. 10. Fundamentals on the Use of Shape Memory Alloys in Soft Robotics, Matteo Cianchetti. 11. Tuned Modified Transpose Jacobian Control of Robotic Systems, S. A. A. Moosavian and M. Karimi. 12. Derivative-Free Nonlinear Kalman Filtering for PMSG Sensorless Control, Gerasimos Rigatos, Pierluigi Siano and Nikolaos Zervos. 13. Construction and Control of Parallel Robots, Moharam Habibnejad Korayem, Soleiman Manteghi and Hami Tourajizadeh. 14. A Localization System for Mobile Robot Using Scanning Laser and Ultrasonic Measurement, Kai Liu, Hongbo Li and Zengqi Sun. 15. Building of Open-Structure Wheel-Based Mobile Robotic Platform, Aleksandar Rodic and Ivan Stojkovic. 16. Design and Physical Implementation of Holonomous Mobile Robot–Holbos, Jasmin Velagic, Admir Kaknjo, Faruk Dautovic, Muhidin Hujdur and Nedim Osmic. 17. Advanced Artificial Vision and Mobile Devices for New Applications in Learning, Entertainment and Cultural Heritage Domains, Gian Luca Foresti, Niki Martinel, Christian Micheloni and Marco Vernier. 18. Application of Stereo Vision and ARM Processor for Motion Control, Moharam Habibnejad Korayem, Michal Irani and Saeed Rafee Nekoo. 19. Mechatronics as Science and Engineering – or Both, Balan Pillai and Vesa Salminen. 20. A Mechatronic Platform for Robotic Educational Activities, Ioannis Kostavelis, Evangelos Boukas, Lazaros Nalpantidis and Antonios Gasteratos. 21. The Importance of Practical Activities in the Formation of Mechatronic Engineers, Joao Carlos M. Carvalho and Vera Lúcia D.S. Franco About the Authors Maki K. Habib is Professor of Robotics and Mechatronics in the School of Science and Engineering, at the American University in Cairo, Egypt. He has been regional editor (Africa/Middle East,) for the International Journal of Mechatronics and Manufacturing Systems (IJMMS) since 2010. He is the recipient of academic awards and has published many articles and books. J. Paulo Davim is Aggregate Professor in the Department of Mechanical Engineering at the University of Aveiro, Portugal and is Head of MACTRIB (Machining and Tribology Research Group). His main research interests include manufacturing, materials and mechanical engineering.
Download or read book Artificial Intelligence and Sustainable Computing written by Manjaree Pandit and published by Springer Nature. This book was released on 2022-11-15 with total page 757 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents high-quality research papers presented at 3rd International Conference on Sustainable and Innovative Solutions for Current Challenges in Engineering and Technology (ICSISCET 2021) held at Madhav Institute of Technology & Science (MITS), Gwalior, India, from November 13–14, 2021. The book extensively covers recent research in artificial intelligence (AI) that knits together nature-inspired algorithms, evolutionary computing, fuzzy systems, computational intelligence, machine learning, deep learning, etc., which is very useful while dealing with real problems due to their model-free structure, learning ability, and flexible approach. These techniques mimic human thinking and decision-making abilities to produce systems that are intelligent, efficient, cost-effective, and fast. The book provides a friendly and informative treatment of the topics which makes this book an ideal reference for both beginners and experienced researchers.
Download or read book Intelligent Systems for Engineers and Scientists Third Edition written by Adrian A. Hopgood and published by CRC Press. This book was released on 2011-12-12 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of this bestseller examines the principles of artificial intelligence and their application to engineering and science, as well as techniques for developing intelligent systems to solve practical problems. Covering the full spectrum of intelligent systems techniques, it incorporates knowledge-based systems, computational intelligence, and their hybrids. Using clear and concise language, Intelligent Systems for Engineers and Scientists, Third Edition features updates and improvements throughout all chapters. It includes expanded and separated chapters on genetic algorithms and single-candidate optimization techniques, while the chapter on neural networks now covers spiking networks and a range of recurrent networks. The book also provides extended coverage of fuzzy logic, including type-2 and fuzzy control systems. Example programs using rules and uncertainty are presented in an industry-standard format, so that you can run them yourself. The first part of the book describes key techniques of artificial intelligence—including rule-based systems, Bayesian updating, certainty theory, fuzzy logic (types 1 and 2), frames, objects, agents, symbolic learning, case-based reasoning, genetic algorithms, optimization algorithms, neural networks, hybrids, and the Lisp and Prolog languages. The second part describes a wide range of practical applications in interpretation and diagnosis, design and selection, planning, and control. The author provides sufficient detail to help you develop your own intelligent systems for real applications. Whether you are building intelligent systems or you simply want to know more about them, this book provides you with detailed and up-to-date guidance. Check out the significantly expanded set of free web-based resources that support the book at: http://www.adrianhopgood.com/aitoolkit/
Download or read book Transdisciplinary Systems Engineering written by Azad M. Madni and published by Springer. This book was released on 2017-10-05 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the ways that disciplinary convergence and technological advance are transforming systems engineering to address gaps in complex systems engineering: Transdisciplinary Systems Engineering (TSE). TSE reaches beyond traditional disciplines to find connections—and this book examines a range of new methods from across such disparate areas of scholarship as computer science, social science, human studies, and systems design to reveal patterns, efficiencies, affordances, and pathways to intuitive design. Organized to serve multiple constituencies, the book stands as an ideal textbook supplement for graduate courses in systems engineering, a reference text for program managers and practicing engineers in all industries, and a primary source for researchers engaged in multidisciplinary research in systems engineering and design.
Download or read book Engineering Design written by Clive L. Dym and published by Cambridge University Press. This book was released on 2014-04-17 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contrary to popular mythology, the designs of favorable products and successful systems do not appear suddenly, or magically. This second edition of Engineering Design demonstrates that symbolic representation and related problem-solving methods, offer significant opportunities to clarify and articulate concepts of design to lay a better framework for design research and design education. Artificial Intelligence (AI) provides a substantial body of material concerned with understanding and modeling cognitive processes. This book adopts the vocabulary and a paradigm of AI to enhance the presentation and explanation of design. It includes concepts from AI because of their explanatory power and their utility as possible ingredients of practical design activity. This second edition has been enriched by the inclusion of recent work on design reasoning, computational design, AI in design, and design cognition, with pointers to a wide cross section of the current literature.
Download or read book Intelligent Systems for Engineers and Scientists written by Adrian A. Hopgood and published by CRC Press. This book was released on 2021-12-09 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth edition of this bestselling textbook explains the principles of artificial intelligence (AI) and its practical applications. Using clear and concise language, it provides a solid grounding across the full spectrum of AI techniques, so that its readers can implement systems in their own domain of interest. The coverage includes knowledge-based intelligence, computational intelligence (including machine learning), and practical systems that use a combination of techniques. All the key techniques of AI are explained—including rule-based systems, Bayesian updating, certainty theory, fuzzy logic (types 1 and 2), agents, objects, frames, symbolic learning, case-based reasoning, genetic algorithms and other optimization techniques, shallow and deep neural networks, hybrids, and the Lisp, Prolog, and Python programming languages. The book also describes a wide range of practical applications in interpretation and diagnosis, design and selection, planning, and control. Fully updated and revised, Intelligent Systems for Engineers and Scientists: A Practical Guide to Artificial Intelligence, Fourth Edition features: A new chapter on deep neural networks, reflecting the growth of machine learning as a key technique for AI A new section on the use of Python, which has become the de facto standard programming language for many aspects of AI The rule-based and uncertainty-based examples in the book are compatible with the Flex toolkit by Logic Programming Associates (LPA) and its Flint extension for handling uncertainty and fuzzy logic. Readers of the book can download this commercial software for use free of charge. This resource and many others are available at the author’s website: adrianhopgood.com. Whether you are building your own intelligent systems, or you simply want to know more about them, this practical AI textbook provides you with detailed and up-to-date guidance.
Download or read book Engineering Artificially Intelligent Systems written by William F. Lawless and published by Springer Nature. This book was released on 2021-11-16 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many current AI and machine learning algorithms and data and information fusion processes attempt in software to estimate situations in our complex world of nested feedback loops. Such algorithms and processes must gracefully and efficiently adapt to technical challenges such as data quality induced by these loops, and interdependencies that vary in complexity, space, and time. To realize effective and efficient designs of computational systems, a Systems Engineering perspective may provide a framework for identifying the interrelationships and patterns of change between components rather than static snapshots. We must study cascading interdependencies through this perspective to understand their behavior and to successfully adopt complex system-of-systems in society. This book derives in part from the presentations given at the AAAI 2021 Spring Symposium session on Leveraging Systems Engineering to Realize Synergistic AI / Machine Learning Capabilities. Its 16 chapters offer an emphasis on pragmatic aspects and address topics in systems engineering; AI, machine learning, and reasoning; data and information fusion; intelligent systems; autonomous systems; interdependence and teamwork; human-computer interaction; trust; and resilience.
Download or read book Modeling of Dynamic Systems with Engineering Applications written by Clarence W. de Silva and published by CRC Press. This book was released on 2022-07-27 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides cutting-edge insight into systems dynamics for both students and practicing engineers. Updated throughout for the second edition, this book serves as a firm foundation to develop expertise in design, prototyping, control, instrumentation, experimentation, and performance analysis. Providing a clear discussion of system dynamics, this book enables students and professionals to both understand and subsequently model mechanical, thermal, fluid, electrical, and multi-domain (or, multi-physics) systems in a systematic, unified, and integrated manner. Concepts of through and across-variables, are introduced and applied, alongside tools of modeling and model representation in linear graphs. This book uses innovative worked examples and case studies, alongside problems and exercises based on practical situations. This book is a crucial companion to undergraduate and postgraduate engineering students, alongside professionals in the engineering field. Complete solutions to end-of-chapter problems are provided in a solutions manual, which is available to instructors.