Download or read book ADVANCED PROCESS DYNAMICS AND CONTROL written by PRABIR KUMAR SARKAR and published by PHI Learning Pvt. Ltd.. This book was released on 2014-10-21 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a sequel to the text Process Dynamics and Control (published by PHI Learning). The objective of this text is to introduce frontier areas of control technology with an ample number of application examples. It also introduces the simulation platform PCSA (Process Control System Analyzer) to include senior level worked out examples like multi-loop control of exothermic reactor and distillation column. The textbook includes discussions on state variable techniques and analysis MIMO systems, and techniques of non-linear systems treatment with extensive number of examples. A chapter has been included to discuss the industrial practice of instrumentation systems for important unit operation and processes, which ends up with the treatment on Plant-wide-control. The two state-of-the-art tools of computer based control, Micro-controllers and Programmable Logic Controllers (PLC), are discussed with practical application examples. A number of demonstration programs have been offered for basic conception development in the accompanying CD. It familiarizes students with the real task of simulation by means of simple computer programming procedure with sufficient graphic support, and helps to develop capability of handling complex dynamic systems. This book is primarily intended for the postgraduate students of chemical engineering and instrumentation and control engineering. Also it will be of considerable interest to professionals engaged in handling process plant automation systems. KEY FEATURES • Majority of worked out examples and exercise problems are chosen from practical process applications. • A complete coverage of controller synthesis in frequency domain provides a better grasp of controller tuning. • Advanced control strategies and adaptive control are covered with ample number of worked out examples.
Download or read book Advanced Process Control and Simulation for Chemical Engineers written by Hossein Ghanadzadeh Gilani and published by CRC Press. This book was released on 2016-04-19 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a modern view of process control in the context of today's technology. It provides innovative chapters on the growth of educational, scientific, and industrial research among chemical engineers. It presents experimental data on thermodynamics and provides a broad understanding of the main computational techniques used for chemical
Download or read book Process Dynamics and Control written by Dale E. Seborg and published by John Wiley & Sons. This book was released on 2016-09-13 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new 4th edition of Seborg’s Process Dynamics Control provides full topical coverage for process control courses in the chemical engineering curriculum, emphasizing how process control and its related fields of process modeling and optimization are essential to the development of high-value products. A principal objective of this new edition is to describe modern techniques for control processes, with an emphasis on complex systems necessary to the development, design, and operation of modern processing plants. Control process instructors can cover the basic material while also having the flexibility to include advanced topics.
Download or read book Understanding Process Dynamics and Control written by Costas Kravaris and published by Cambridge University Press. This book was released on 2021-04-08 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a fresh look at process control, this new text demonstrates state-space approach shown in parallel with the traditional approach to explain the strategies used in industry today. Modern time-domain and traditional transform-domain methods are integrated throughout and explain the advantages and limitations of each approach; the fundamental theoretical concepts and methods of process control are applied to practical problems. To ensure understanding of the mathematical calculations involved, MATLAB® is included for numeric calculations and MAPLE for symbolic calculations, with the math behind every method carefully explained so that students develop a clear understanding of how and why the software tools work. Written for a one-semester course with optional advanced-level material, features include solved examples, cases that include a number of chemical reactor examples, chapter summaries, key terms, and concepts, as well as over 240 end-of-chapter problems, focused computational exercises and solutions for instructors.
Download or read book Process Dynamics Modeling and Control written by Babatunde Ayodeji Ogunnaike and published by Topics in Chemical Engineering. This book was released on 1994 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text offers a modern view of process control in the context of today's technology. It provides the standard material in a coherent presentation and uses a notation that is more consistent with the research literature in process control. Topics that are unique include a unified approach to model representations, process model formation and process identification, multivariable control, statistical quality control, and model-based control. This book is designed to be used as an introductory text for undergraduate courses in process dynamics and control. In addition to chemical engineering courses, the text would also be suitable for such courses taught in mechanical, nuclear, industrial, and metallurgical engineering departments. The material is organized so that modern concepts are presented to the student but details of the most advanced material are left to later chapters. The text material has been developed, refined, and classroom tested over the last 10-15 years at the University of Wisconsin and more recently at the University of Delaware. As part of the course at Wisconsin, a laboratory has been developed to allow the students hands-on experience with measurement instruments, real time computers, and experimental process dynamics and control problems.
Download or read book Advanced Process Engineering Control written by Paul Serban Agachi and published by Walter de Gruyter GmbH & Co KG. This book was released on 2016-12-05 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a mature topic in chemical engineering, the book provides methods, problems and tools used in process control engineering. It discusses: process knowledge, sensor system technology, actuators, communication technology, and logistics, design and construction of control systems and their operation. The knowledge goes beyond the traditional process engineering field by applying the same principles, to biomedical processes, energy production and management of environmental issues. The book explains all the determinations in the "chemical systems" or "process systems", starting from the beginning of the processes, going through the intricate interdependency of the process stages, analyzing the hardware components of a control system and ending with the design of an appropriate control system for a process parameter or a whole process. The book is first addressed to the students and graduates of the departments of Chemical or Process Engineering. Second, to the chemical or process engineers in all industries or research and development centers, because they will notice the resemblance in approach from the system and control point of view, between different fields which might seem far from each other, but share the same control philosophy.
Download or read book Process Dynamics and Control written by Govind Das Nageshwar and published by PHI Learning Pvt. Ltd.. This book was released on 2011 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Process Control written by Willis Harmon Ray and published by Butterworth-Heinemann. This book was released on 1989 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to be used as a text for advanced undergraduate and graduate courses in process control, as well as a reference for practising control engineers. It requires a strong background in mathematics and chemical engineering and aims to provide broad coverage of applied modern control theory.
Download or read book Process Dynamics and Control written by Brian Roffel and published by John Wiley & Sons. This book was released on 2007-01-11 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a different approach to other textbooks in the area, this book is a comprehensive introduction to the subject divided in three broad parts. The first part deals with building physical models, the second part with developing empirical models and the final part discusses developing process control solutions. Theory is discussed where needed to ensure students have a full understanding of key techniques that are used to solve a modeling problem. Hallmark Features: Includes worked out examples of processes where the theory learned early on in the text can be applied. Uses MATLAB simulation examples of all processes and modeling techniques- further information on MATLAB can be obtained from www.mathworks.com Includes supplementary website to include further references, worked examples and figures from the book This book is structured and aimed at upper level undergraduate students within chemical engineering and other engineering disciplines looking for a comprehensive introduction to the subject. It is also of use to practitioners of process control where the integrated approach of physical and empirical modeling is particularly valuable.
Download or read book Process Control Concepts Dynamics And Applications written by S. K. Singh and published by PHI Learning Pvt. Ltd.. This book was released on 2007-12 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive introduction to the vast and important field of control systems. The text introduces the theory of automatic control and its applications to the chemical process industries with emphasis on topics that are of use to the process control engineers and specialists. It also covers the advanced control strategies and its practical implementation with an excellent balance of theoretical concepts and engineering practice.
Download or read book Advanced Practical Process Control written by Brian Roffel and published by Springer Science & Business Media. This book was released on 2004 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text and reference offers an application-oriented approach to process control. It systematically explains process identification, control and optimization, the three key steps needed to solve a multivariable control problem. Theory is discussed as far as it is needed to understand and solve the defined problem, while numerous examples written in MATLAB illustrate the problem-solving approach.
Download or read book Advanced Process Control and Simulation for Chemical Engineers written by Hossein Ghanadzadeh Gilani and published by CRC Press. This book was released on 2013-02-19 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a modern view of process control in the context of today’s technology. It provides innovative chapters on the growth of educational, scientific, and industrial research among chemical engineers. It presents experimental data on thermodynamics and provides a broad understanding of the main computational techniques used for chemical processing. Readers will gain an understanding of the areas of process control that all chemical engineers need to know. The information is presented in a concise and readable format. The information covers the basics and also provides unique topics, such as using a unified approach to model representations, statistical quality control, and model-based control. The methods presented have been successfully applied in industry to solve real problems. Designed as an advanced research guide in process dynamics and control, the book will be useful in chemical engineering courses as well as for the teaching of mechanical, nuclear, industrial, and metallurgical engineering.
Download or read book A Real Time Approach to Process Control written by William Y. Svrcek and published by John Wiley & Sons. This book was released on 2013-03-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Real- Time Approach to Process Control provides the reader with both a theoretical and practical introduction to this increasingly important approach. Assuming no prior knowledge of the subject, this text introduces all of the applied fundamentals of process control from instrumentation to process dynamics, PID loops and tuning, to distillation, multi-loop and plant-wide control. In addition, readers come away with a working knowledge of the three most popular dynamic simulation packages. The text carefully balances theory and practice by offering readings and lecture materials along with hands-on workshops that provide a 'virtual' process on which to experiment and from which to learn modern, real time control strategy development. As well as a general updating of the book specific changes include: A new section on boiler control in the chapter on common control loops A major rewrite of the chapters on distillation column control and multiple single-loop control schemes The addition of new figures throughout the text Workshop instructions will be altered to suit the latest versions of HYSYS, ASPEN and DYNSIM simulation software A new solutions manual for the workshop problems
Download or read book Nonlinear Process Control written by Michael A. Henson and published by Prentice Hall. This book was released on 1997 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Process Control assembles the latest theoretical and practical research on design, analysis and application of nonlinear process control strategies. It presents detailed coverage of all three major elements of nonlinear process control: identification, controller design, and state estimation. Nonlinear Process Control reflects the contributions of eleven leading researchers in the field. It is an ideal textbook for graduate courses in process control, as well as a concise, up-to-date reference for control engineers.
Download or read book Advanced Process Control and Simulation for Chemical Engineers written by Hossein Gilani and published by . This book was released on 2016 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a modern view of process control in the context of today's technology. It provides innovative chapters on the growth of educational, scientific, and industrial research among chemical engineers. It presents experimental data on thermodynamics and provides a broad understanding of the main computational techniques used for chemical processing. Readers will gain an understanding of the areas of process control that all chemical engineers need to know. The information is presented in a concise and readable format. The information covers the basics and also provides unique topics, such as using a unified approach to model representations, statistical quality control, and model-based control. The methods presented have been successfully applied in industry to solve real problems. Designed as an advanced research guide in process dynamics and control, the book will be useful in chemical engineering courses as well as for the teaching of mechanical, nuclear, industrial, and metallurgical engineering.
Download or read book Modeling and Advanced Control for Process Industries written by Ming Rao and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the complexity of the process operation and the requirements for high quality, low cost, safety and the protection of the environment, an increasing number of pulp and paper companies are in need of an advanced control technology to improve their process operation. This publication presents, for the first time, the theory of such an advanced control technology as well as various industrial applications associated especially with Paper Making. The reader will gain a better understanding of the most popular and advanced process control techniques and applications of these techniques in an important real-time process industry. The contents are based on the authors' own research on modeling and advanced control in this field.
Download or read book Process Identification and PID Control written by Su Whan Sung and published by John Wiley & Sons. This book was released on 2009-07-23 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Identification and PID Control enables students and researchers to understand the basic concepts of feedback control, process identification, autotuning as well as design and implement feedback controllers, especially, PID controllers. The first The first two parts introduce the basics of process control and dynamics, analysis tools (Bode plot, Nyquist plot) to characterize the dynamics of the process, PID controllers and tuning, advanced control strategies which have been widely used in industry. Also, simple simulation techniques required for practical controller designs and research on process identification and autotuning are also included. Part 3 provides useful process identification methods in real industry. It includes several important identification algorithms to obtain frequency models or continuous-time/discrete-time transfer function models from the measured process input and output data sets. Part 4 introduces various relay feedback methods to activate the process effectively for process identification and controller autotuning. Combines the basics with recent research, helping novice to understand advanced topics Brings several industrially important topics together: Dynamics Process identification Controller tuning methods Written by a team of recognized experts in the area Includes all source codes and real-time simulated processes for self-practice Contains problems at the end of every chapter PowerPoint files with lecture notes available for instructor use