Download or read book Advanced Packaging and Manufacturing Technology Based on Adhesion Engineering written by Seonho Seok and published by Springer. This book was released on 2018-04-27 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces microelectromechanical systems (MEMS) packaging utilizing polymers or thin films – a new and unique packaging technology. It first investigates the relationship between applied load and opening displacement as a function of benzocyclobutene (BCB) cap size to find the debonding behavior, and then presents BCB cap deformation and stress development at different opening displacements as a function of BCB thickness, which is a criterion for BCB cap transfer failure. Transfer packaging techniques are attracting increasing interest because they deliver packaging caps, from carrier wafers to device wafers, and minimize the fabrication issues frequently encountered in thin-film or polymer cap encapsulation. The book describes very-low-loss polymer cap or thin-film-transfer techniques based on anti-adhesion coating methods for radio frequency (RF) (-MEMS) device packaging. Since the polymer caps are susceptible to deformation due to their relatively low mechanical stiffness during debonding of the carrier wafer, the book develops an appropriate finite element model (FEM) to simulate the debonding process occurring in the interface between Si carrier wafer and BCB cap. Lastly, it includes the load–displacement curve of different materials and presents a flexible polymer filter and a tunable filter as examples of the applications of the proposed technology.

Download or read book Materials for Advanced Packaging written by Daniel Lu and published by Springer. This book was released on 2016-11-18 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant progress has been made in advanced packaging in recent years. Several new packaging techniques have been developed and new packaging materials have been introduced. This book provides a comprehensive overview of the recent developments in this industry, particularly in the areas of microelectronics, optoelectronics, digital health, and bio-medical applications. The book discusses established techniques, as well as emerging technologies, in order to provide readers with the most up-to-date developments in advanced packaging.

Download or read book Semiconductor Advanced Packaging written by John H. Lau and published by Springer Nature. This book was released on 2021-05-17 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on the design, materials, process, fabrication, and reliability of advanced semiconductor packaging components and systems. Both principles and engineering practice have been addressed, with more weight placed on engineering practice. This is achieved by providing in-depth study on a number of major topics such as system-in-package, fan-in wafer/panel-level chip-scale packages, fan-out wafer/panel-level packaging, 2D, 2.1D, 2.3D, 2.5D, and 3D IC integration, chiplets packaging, chip-to-wafer bonding, wafer-to-wafer bonding, hybrid bonding, and dielectric materials for high speed and frequency. The book can benefit researchers, engineers, and graduate students in fields of electrical engineering, mechanical engineering, materials sciences, and industry engineering, etc.

Download or read book Manufacturing Challenges in Electronic Packaging written by Y.C. Lee and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: About five to six years ago, the words 'packaging and manufacturing' started to be used together to emphasize that we have to make not only a few but thousands or even millions of packages which meet functional requirements. The aim of this book is to provide the much needed reviews and in-depth discussions on the advanced topics surrounding packaging and manufacturing. The first chapter gives a comprehensive review of manufacturing chal lenges in electronic packaging based on trends predicted by different resources. Almost all the functional specifications have already been met by technologies demonstrated in laboratories. However, it would take tremendous efforts to implement these technologies for mass production or flexible manufacturing. The topics crucial to this implementation are discussed in the following chapters: Chapter 2: Challenges in solder assembly technologies; Chapter 3: Testing and characterization; Chapter 4: Design for manufacture and assembly of electronic packages; Chapter 5: Process modeling, optimization and control in electronics manufacturing; and Chapter 6: Integrated manufacturing system for printed circuit board assembly. The electronics-based products are very competitive and becoming more and more application-specific. Their packages should fulfill cost, speed, power, weight, size, reliability and time-to-market requirements. More importantly, the packages should be manufacturable in mass or flexible production lines. These chapters are excellent references for professionals who need to meet the challenge through design and manufacturing improvements. This book will also introduce students to the critical issues for competitive design and manufacturing in electronic packaging.

Download or read book Advanced Manufacturing process lead free interconnect materials and reliability modeling for electronics packaging written by and published by Emerald Group Publishing. This book was released on 2006 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of Soldering & Surface Mount Technology (SSMT) presents a number of papers from the 7th High Density Microsystems Design, Packaging and Failure Analysis (HDP'05) conference held in 2005 in the dynamic city of Shanghai, China. With over 100 high quality technical papers and presentation this annual conference brings together scholars and industrialists from Asia, Europe and the Americas to discuss the challenges and latest advances in high density packaging. This e-book contains six papers from the HDP conference, plus one additional contribution, which discuss the behaviour of key i.

Download or read book Electronic Packaging Science and Technology written by King-Ning Tu and published by John Wiley & Sons. This book was released on 2021-12-14 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Must-have reference on electronic packaging technology! The electronics industry is shifting towards system packaging technology due to the need for higher chip circuit density without increasing production costs. Electronic packaging, or circuit integration, is seen as a necessary strategy to achieve a performance growth of electronic circuitry in next-generation electronics. With the implementation of novel materials with specific and tunable electrical and magnetic properties, electronic packaging is highly attractive as a solution to achieve denser levels of circuit integration. The first part of the book gives an overview of electronic packaging and provides the reader with the fundamentals of the most important packaging techniques such as wire bonding, tap automatic bonding, flip chip solder joint bonding, microbump bonding, and low temperature direct Cu-to-Cu bonding. Part two consists of concepts of electronic circuit design and its role in low power devices, biomedical devices, and circuit integration. The last part of the book contains topics based on the science of electronic packaging and the reliability of packaging technology.

Download or read book Modeling and Simulation for Microelectronic Packaging Assembly written by Shen Liu and published by John Wiley & Sons. This book was released on 2011-05-17 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although there is increasing need for modeling and simulation in the IC package design phase, most assembly processes and various reliability tests are still based on the time consuming "test and try out" method to obtain the best solution. Modeling and simulation can easily ensure virtual Design of Experiments (DoE) to achieve the optimal solution. This has greatly reduced the cost and production time, especially for new product development. Using modeling and simulation will become increasingly necessary for future advances in 3D package development. In this book, Liu and Liu allow people in the area to learn the basic and advanced modeling and simulation skills to help solve problems they encounter. Models and simulates numerous processes in manufacturing, reliability and testing for the first time Provides the skills necessary for virtual prototyping and virtual reliability qualification and testing Demonstrates concurrent engineering and co-design approaches for advanced engineering design of microelectronic products Covers packaging and assembly for typical ICs, optoelectronics, MEMS, 2D/3D SiP, and nano interconnects Appendix and color images available for download from the book's companion website Liu and Liu have optimized the book for practicing engineers, researchers, and post-graduates in microelectronic packaging and interconnection design, assembly manufacturing, electronic reliability/quality, and semiconductor materials. Product managers, application engineers, sales and marketing staff, who need to explain to customers how the assembly manufacturing, reliability and testing will impact their products, will also find this book a critical resource. Appendix and color version of selected figures can be found at www.wiley.com/go/liu/packaging

Download or read book Adhesive Bonding written by Robert D. Adams and published by Woodhead Publishing. This book was released on 2021-07-02 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesive Bonding: Science, Technology and Applications, Second Edition guides the reader through the fundamentals, mechanical properties and applications of adhesive bonding. This thoroughly revised and expanded new edition reflects the many advances that have occurred in recent years. Sections cover the fundamentals of adhesive bonding, explaining how adhesives and sealants work, and how to assess and treat surfaces, how adhesives perform under stress and the factors affecting fatigue and failure, stress analysis, environmental durability, non-destructive testing, impact behavior, fracture mechanics, fatigue, vibration damping, and applications in construction, automotive, marine, footwear, electrical engineering, aerospace, repair, electronics, biomedicine, and bonding of composites. With its distinguished editor and international team of contributors, this book is an essential resource for industrial engineers, R&D, and scientists working with adhesives and their industrial applications, as well as researchers and advanced students in adhesion, joining, polymer science, materials science and mechanical engineering. Offers detailed, methodical coverage of the fundamentals, mechanical properties and industrial applications of adhesive bonding Enables the successful preparation of adhesives for a broad range of important load-bearing applications in areas such as automotive and aerospace, construction, electronics and biomedicine Covers the latest advances in adhesive bonding, including improved repair techniques for metallic and composite structures, cohesive zone modeling, and disassembly and recycling

Download or read book Semiconductor Packaging written by Andrea Chen and published by CRC Press. This book was released on 2016-04-19 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: In semiconductor manufacturing, understanding how various materials behave and interact is critical to making a reliable and robust semiconductor package. Semiconductor Packaging: Materials Interaction and Reliability provides a fundamental understanding of the underlying physical properties of the materials used in a semiconductor package. By tying together the disparate elements essential to a semiconductor package, the authors show how all the parts fit and work together to provide durable protection for the integrated circuit chip within as well as a means for the chip to communicate with the outside world. The text also covers packaging materials for MEMS, solar technology, and LEDs and explores future trends in semiconductor packages.

Download or read book Encyclopedia of Packaging Materials Processes and Mechanics written by Avram Bar-Cohen and published by World Scientific. This book was released on 2019 with total page 1079 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Packaging materials, assembly processes, and the detailed understanding of multilayer mechanics have enabled much of the progress in miniaturization, reliability, and functional density achieved by modern electronic, microelectronic, and nanoelectronic products. The design and manufacture of miniaturized packages, providing low-loss electrical and/or optical communication, while protecting the semiconductor chips from environmental stresses and internal power cycling, require a carefully balanced selection of packaging materials and processes. Due to the relative fragility of these semiconductor chips, as well as the underlying laminated substrates and the bridging interconnect, selection of the packaging materials and processes is inextricably bound with the mechanical behavior of the intimately packaged multilayer structures, in all phases of development for traditional, as well as emerging, electronic product categories. The Encyclopedia of Packaging Materials, Processes, and Mechanics, compiled in 8, multi-volume sets, provides comprehensive coverage of the configurations and techniques, assembly materials and processes, modeling and simulation tools, and experimental characterization and validation techniques for electronic packaging. Each of the volumes presents the accumulated wisdom and shared perspectives of leading researchers and practitioners in the packaging of electronic components. The Encyclopedia of Packaging Materials, Processes, and Mechanics will provide the novice and student with a complete reference for a quick ascent on the packaging "learning curve," the practitioner with a validated set of techniques and tools to face every challenge in packaging design and development, and researchers with a clear definition of the state-of-the-art and emerging needs to guide their future efforts. This encyclopedia will, thus, be of great interest to packaging engineers, electronic product development engineers, and product managers, as well as to researchers in the assembly and mechanical behavior of electronic and photonic components and systems. It will be most beneficial to undergraduate and graduate students studying materials, mechanical, electrical, and electronic engineering, with a strong interest in electronic packaging applications"--Publisher's website

Download or read book Direct Copper Interconnection for Advanced Semiconductor Technology written by Dongkai Shangguan and published by CRC Press. This book was released on 2024-06-28 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the “More than Moore” era, performance requirements for leading edge semiconductor devices are demanding extremely fine pitch interconnection in semiconductor packaging. Direct copper interconnection has emerged as the technology of choice in the semiconductor industry for fine pitch interconnection, with significant benefits for interconnect density and device performance. Low-temperature direct copper bonding, in particular, will become widely adopted for a broad range of highperformance semiconductor devices in the years to come. This book offers a comprehensive review and in-depth discussions of the key topics in this critical new technology. Chapter 1 reviews the evolution and the most recent advances in semiconductor packaging, leading to the requirement for extremely fine pitch interconnection, and Chapter 2 reviews different technologies for direct copper interconnection, with advantages and disadvantages for various applications. Chapter 3 offers an in-depth review of the hybrid bonding technology, outlining the critical processes and solutions. The area of materials for hybrid bonding is covered in Chapter 4, followed by several chapters that are focused on critical process steps and equipment for copper electrodeposition (Chapter 5), planarization (Chapter 6), wafer bonding (Chapter 7), and die bonding (Chapter 8). Aspects related to product applications are covered in Chapter 9 for design and Chapter 10 for thermal simulation. Finally, Chapter 11 covers reliability considerations and computer modeling for process and performance characterization, followed by the final chapter (Chapter 12) outlining the current and future applications of the hybrid bonding technology. Metrology and testing are also addressed throughout the chapters. Business, economic, and supply chain considerations are discussed as related to the product applications and manufacturing deployment of the technology, and the current status and future outlook as related to the various aspects of the ecosystem are outlined in the relevant chapters of the book. The book is aimed at academic and industry researchers as well as industry practitioners, and is intended to serve as a comprehensive source of the most up-to-date knowledge, and a review of the state-of-the art of the technology and applications, for direct copper interconnection and advanced semiconductor packaging in general.

Download or read book Modeling Analysis Design and Tests for Electronics Packaging beyond Moore written by Hengyun Zhang and published by Woodhead Publishing. This book was released on 2019-11-14 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling, Analysis, Design and Testing for Electronics Packaging Beyond Moore provides an overview of electrical, thermal and thermomechanical modeling, analysis, design and testing for 2.5D/3D. The book addresses important topics, including electrically and thermally induced issues, such as EMI and thermal issues, which are crucial to package signal and thermal integrity. It also covers modeling methods to address thermomechanical stress related to the package structural integrity. In addition, practical design and test techniques for packages and systems are included. Includes advanced modeling and analysis methods and techniques for state-of-the art electronics packaging Features experimental characterization and qualifications for the analysis and verification of electronic packaging design Provides multiphysics modeling and analysis techniques of electronic packaging

Download or read book Electronic Packaging written by John H. Lau and published by McGraw-Hill Professional Publishing. This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is the ultimate electronic packaging resource, in which luminaries from the four intertwined disciplines of packaging present a one-stop guide to the state of the art. An absolute necessity for anyone working in the field, this "how-to" reference covers all the newest technologies, including BGA, Flip Chip, and CSP.

Download or read book Polymers in Organic Electronics written by Sulaiman Khalifeh and published by Elsevier. This book was released on 2020-04-01 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers in Organic Electronics: Polymer Selection for Electronic, Mechatronic, and Optoelectronic Systems provides readers with vital data, guidelines, and techniques for optimally designing organic electronic systems using novel polymers. The book classifies polymer families, types, complexes, composites, nanocomposites, compounds, and small molecules while also providing an introduction to the fundamental principles of polymers and electronics. Features information on concepts and optimized types of electronics and a classification system of electronic polymers, including piezoelectric and pyroelectric, optoelectronic, mechatronic, organic electronic complexes, and more. The book is designed to help readers select the optimized material for structuring their organic electronic system.Chapters discuss the most common properties of electronic polymers, methods of optimization, and polymeric-structured printed circuit boards. The polymeric structures of optoelectronics and photonics are covered and the book concludes with a chapter emphasizing the importance of polymeric structures for packaging of electronic devices. Provides key identifying details on a range of polymers, micro-polymers, nano-polymers, resins, hydrocarbons, and oligomers Covers the most common electrical, electronic, and optical properties of electronic polymers Describes the underlying theories on the mechanics of polymer conductivity Discusses polymeric structured printed circuit boards, including their rapid prototyping and optimizing their polymeric structures Shows optimization methods for both polymeric structures of organic active electronic components and organic passive electronic components

Download or read book Adhesion in Microelectronics written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2014-08-25 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book will provide both fundamental and applied aspects of adhesion pertaining to microelectronics in a single and easily accessible source. Among the topics to be covered include; Various theories or mechanisms of adhesion Surface (physical or chemical) characterization of materials as it pertains to adhesion Surface cleaning as it pertains to adhesion Ways to improve adhesion Unraveling of interfacial interactions using an array of pertinent techniques Characterization of interfaces / interphases Polymer-polymer adhesion Metal-polymer adhesion (metallized polymers) Polymer adhesion to various substrates Adhesion of thin films Adhesion of underfills Adhesion of molding compounds Adhesion of different dielectric materials Delamination and reliability issues in packaged devices Interface mechanics and crack propagation Adhesion measurement of thin films and coatings

Download or read book Advanced Materials for Thermal Management of Electronic Packaging written by Xingcun Colin Tong and published by Springer Science & Business Media. This book was released on 2011-01-05 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for advanced thermal management materials in electronic packaging has been widely recognized as thermal challenges become barriers to the electronic industry’s ability to provide continued improvements in device and system performance. With increased performance requirements for smaller, more capable, and more efficient electronic power devices, systems ranging from active electronically scanned radar arrays to web servers all require components that can dissipate heat efficiently. This requires that the materials have high capability of dissipating heat and maintaining compatibility with the die and electronic packaging. In response to critical needs, there have been revolutionary advances in thermal management materials and technologies for active and passive cooling that promise integrable and cost-effective thermal management solutions. This book meets the need for a comprehensive approach to advanced thermal management in electronic packaging, with coverage of the fundamentals of heat transfer, component design guidelines, materials selection and assessment, air, liquid, and thermoelectric cooling, characterization techniques and methodology, processing and manufacturing technology, balance between cost and performance, and application niches. The final chapter presents a roadmap and future perspective on developments in advanced thermal management materials for electronic packaging.

Download or read book Advanced Wirebond Interconnection Technology written by Shankara K. Prasad and published by Springer Science & Business Media. This book was released on 2006-05-10 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the reviews: "This book is intended for an assembly production house setting, appropriate for management, designers, chief operators, as well as wirebond production engineers. Operational issues such as specifying and optimizing wire and automatic bonders for a product line are included. The book is very good with "visual" explanations for quick grasping of the issues. In addition, the fundamental metallurgical or mechanical root causes behind material and process choices are presented. The book has a clear prose style and a very readable font and page layout. The figures, although effective, are simply low resolution screen prints from a personal computer and thus have aliasing and fuzziness. This book has excellent overall tutorial and enough description of wire and bonding equipment so the reader could specify and negotiate correctly for with suppliers. The majority of the book dwells on establishing the bonding process for a particular product; determining the "window" of adjustments. The book ends with discussions on establishing quality metrics and reliability assurance tests. Each chapter of the book includes enough tutorial information to allow it to alone with little need to page backwards. A short but good reference section is at the end. If you have not read a wirebonding book, or the one you read 10 years ago was borrowed and never returned, now is the time to buy this book." ( CMPT Newsletter, June 2005)