Download or read book Advanced Numerical Methods for Complex Environmental Models Needs and Availability written by István Faragó and published by Bentham Science Publishers. This book was released on 2013-12-10 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: High air pollution levels pose a significant threat to plants, animals and human beings. Efforts by researchers are directed towards keeping air pollution levels below well defined ‘critical‘ levels in order to maintain a sustainable atmosphere and environmental system. The application of advanced mathematical models is important for researchers to achieve this goal as efficiently as possible. Mathematical models can be used to predict answers to many important questions about the environment. This application comes with several complex theoretical and practical obstacles which need to be resolved. A successfully applicable mathematical model needs to enable researchers to • Mathematically describe all important physical and chemical processes. • Apply fast and sufficiently accurate numerical methods. • Ensure that the model runs efficiently on modern high speed computers. • Use high quality input data, both meteorological data and emission inventories, in the runs. • Verify the model results by comparing them with reliable measurements taken in different parts of the spatial domain of the model. • Carry out long series of sensitivity experiments to check the response of the model to changes of different key parameters. • Visualize and animate the output results in order to make them easily understandable even to non-specialists. This monograph thoroughly describes mathematical methods useful for various situations in environmental modeling - including finite difference methods, splitting methods, parallel computation, etc. - and provides a framework for resolving problems posed in relation to the points listed above. Chapters are written by well-known specialists making this book a handy reference for researchers, university teachers and students working and studying in the areas of air pollution, meteorology, applied mathematics and computer science.
Download or read book Advanced Numerical Methods for Complex Environmental Models written by István Faragó and published by . This book was released on 2013-12-10 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: "High air pollution levels pose a significant threat to plants, animals and human beings. Efforts by researchers are directed towards keeping air pollution levels below well defined 'critical' levels in order to maintain a sustainable atmosphere and enviro"
Download or read book Progress in Industrial Mathematics at ECMI 2012 written by Magnus Fontes and published by Springer. This book was released on 2014-05-14 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the 17th European Conference on Mathematics for Industry, ECMI2012, held in Lund, Sweden, July 2012, at which ECMI celebrated its 25th anniversary. It covers mathematics in a wide range of applications and methods, from circuit and electromagnetic devices, environment, fibers, flow, medicine, robotics and automotive industry, further applications to methods and education. The book includes contributions from leading figures in business, science and academia that promote the application of mathematics to industry and emphasize industrial sectors that offer the most exciting opportunities. The contributions reinforce the role of mathematics as being a catalyst for innovation as well as an overarching resource for industry and business. The book features an accessible presentation of real-world problems in industry and finance, provides insight and tools for engineers and scientists who will help them to solve similar problems and offers modeling and simulation techniques that will provide mathematicians with a source of fresh ideas and inspiration.
Download or read book Numerical Methods and Applications written by Geno Nikolov and published by Springer. This book was released on 2019-01-21 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 9th International Conference on Numerical Methods and Applications, NMA 2018, held in Borovets, Bulgaria, in August 2018. The 56 revised regular papers presented were carefully reviewed and selected from 61 submissions for inclusion in this book. The papers are organized in the following topical sections: numerical search and optimization; problem-driven numerical method: motivation and application, numerical methods for fractional diffusion problems; orthogonal polynomials and numerical quadratures; and Monte Carlo and Quasi-Monte Carlo methods.
Download or read book Environmental Modeling Using Satellite Imaging and Dataset Re processing written by Moses Eterigho Emetere and published by Springer. This book was released on 2019-02-21 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces methods of re-processing images to extract numerical information that can be used to quantify the observables in environmental modelling. Experiments or procedures that yield large images can be statistically or parametrically examined. Through the use of open source libraries, the book shows how ‘big data’ in the form of images or datasets can be comparatively analysed along same defined procedures or standards. This book helps to solve the challenges of discarding datasets that are relevant directly or indirectly to the research. The habit of screening datasets leads to the discard of over 90% of the original dataset or images generated in the experiments or procedure. If the images or datasets are generated under the same principles or conditions, then each measurement may be the narrative of unique events. The focus of this book is to enlighten researchers on how to analyse measurements with the aim of ensuring 100% utilization.
Download or read book The Second Order Adjoint Sensitivity Analysis Methodology written by Dan Gabriel Cacuci and published by CRC Press. This book was released on 2018-02-19 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second-Order Adjoint Sensitivity Analysis Methodology generalizes the First-Order Theory presented in the author’s previous books published by CRC Press. This breakthrough has many applications in sensitivity and uncertainty analysis, optimization, data assimilation, model calibration, and reducing uncertainties in model predictions. The book has many illustrative examples that will help readers understand the complexity of the subject and will enable them to apply this methodology to problems in their own fields. Highlights: • Covers a wide range of needs, from graduate students to advanced researchers • Provides a text positioned to be the primary reference for high-order sensitivity and uncertainty analysis • Applies to all fields involving numerical modeling, optimization, quantification of sensitivities in direct and inverse problems in the presence of uncertainties. About the Author: Dan Gabriel Cacuci is a South Carolina SmartState Endowed Chair Professor and the Director of the Center for Nuclear Science and Energy, Department of Mechanical Engineering at the University of South Carolina. He has a Ph.D. in Applied Physics, Mechanical and Nuclear Engineering from Columbia University. He is also the recipient of many awards including four honorary doctorates, the Ernest Orlando Lawrence Memorial award from the U.S. Dept. of Energy and the Arthur Holly Compton, Eugene P. Wigner and the Glenn Seaborg Awards from the American Nuclear Society.
Download or read book The nth Order Comprehensive Adjoint Sensitivity Analysis Methodology Volume I written by Dan Gabriel Cacuci and published by Springer Nature. This book was released on 2022-07-19 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The computational models of physical systems comprise parameters, independent and dependent variables. Since the physical processes themselves are seldom known precisely and since most of the model parameters stem from experimental procedures which are also subject to imprecisions, the results predicted by these models are also imprecise, being affected by the uncertainties underlying the respective model. The functional derivatives (also called “sensitivities”) of results (also called “responses”) produced by mathematical/computational models are needed for many purposes, including: (i) understanding the model by ranking the importance of the various model parameters; (ii) performing “reduced-order modeling” by eliminating unimportant parameters and/or processes; (iii) quantifying the uncertainties induced in a model response due to model parameter uncertainties; (iv) performing “model validation,” by comparing computations to experiments to address the question “does the model represent reality?” (v) prioritizing improvements in the model; (vi) performing data assimilation and model calibration as part of forward “predictive modeling” to obtain best-estimate predicted results with reduced predicted uncertainties; (vii) performing inverse “predictive modeling”; (viii) designing and optimizing the system. This 3-Volume monograph describes a comprehensive adjoint sensitivity analysis methodology, developed by the author, which enables the efficient and exact computation of arbitrarily high-order sensitivities of model responses in large-scale systems comprising many model parameters. The qualifier “comprehensive” is employed to highlight that the model parameters considered within the framework of this methodology also include the system’s uncertain boundaries and internal interfaces in phase-space. The model’s responses can be either scalar-valued functionals of the model’s parameters and state variables (e.g., as customarily encountered in optimization problems) or general function-valued responses. Since linear operators admit bona-fide adjoint operators, responses of models that are linear in the state functions (i.e., dependent variables) can depend simultaneously on both the forward and the adjoint state functions. Hence, the sensitivity analysis of such responses warrants the treatment of linear systems in their own right, rather than treating them as particular cases of nonlinear systems. This is in contradistinction to responses for nonlinear systems, which can depend only on the forward state functions, since nonlinear operators do not admit bona-fide adjoint operators (only a linearized form of a nonlinear operator may admit an adjoint operator). Thus, Volume 1 of this book presents the mathematical framework of the nth-Order Comprehensive Adjoint Sensitivity Analysis Methodology for Response-Coupled Forward/Adjoint Linear Systems (abbreviated as “nth-CASAM-L”), which is conceived for the most efficient computation of exactly obtained mathematical expressions of arbitrarily-high-order (nth-order) sensitivities of a generic system response with respect to all of the parameters underlying the respective forward/adjoint systems. Volume 2 of this book presents the application of the nth-CASAM-L to perform a fourth-order sensitivity and uncertainty analysis of an OECD/NEA reactor physics benchmark which is representative of a large-scale model comprises many (21,976) uncertain parameters, thereby amply illustrating the unique potential of the nth-CASAM-L to enable the exact and efficient computation of chosen high-order response sensitivities to model parameters. Volume 3 of this book presents the “nth-Order Comprehensive Adjoint Sensitivity Analysis Methodology for Nonlinear Systems” (abbreviation: nth-CASAM-N) for the practical, efficient, and exact computation of arbitrarily-high order sensitivities of responses to model parameters for systems that are also nonlinear in their underlying state functions. Such computations are not feasible with any other methodology. The application of the nth-CASAM-L and the nth-CASAM-N overcomes the so-called “curse of dimensionality” in sensitivity and uncertainty analysis, thus revolutionizing all of the fields of activities which require accurate computation of response sensitivities. Since this monograph includes many illustrative, fully worked-out, paradigm problems, it can serve as a textbook or as supplementary reading for graduate courses in academic departments in the natural sciences and engineering.
Download or read book Large Scale Scientific Computations written by Ivan Lirkov and published by Springer Nature. This book was released on with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Environmental Data Analysis and Modeling written by Moses Eterigho Emetere and published by Springer Nature. This book was released on 2020-01-03 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces numerical methods for processing datasets which may be of any form, illustrating adequately computational resolution of environmental alongside the use of open source libraries. This book solves the challenges of misrepresentation of datasets that are relevant directly or indirectly to the research. It illustrates new ways of screening datasets or images for maximum utilization. The adoption of various numerical methods in dataset treatment would certainly create a new scientific approach. The book enlightens researchers on how to analyse measurements to ensure 100% utilization. It introduces new ways of data treatment that are based on a sound mathematical and computational approach.
Download or read book Applications of Data Assimilation and Inverse Problems in the Earth Sciences written by Alik Ismail-Zadeh and published by Cambridge University Press. This book was released on 2023-06-30 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on data assimilation and inverse problems, and their applications across a broad range of geophysical disciplines, ideal for researchers and graduate students. It highlights the importance of data assimilation for understanding dynamical processes of the Earth and its space environment, and summarises recent advances.
Download or read book Environmental Modelling written by John Wainwright and published by John Wiley & Sons. This book was released on 2013-01-22 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation models are an established method used to investigate processes and solve practical problems in a wide variety of disciplines. Central to the concept of this second edition is the idea that environmental systems are complex, open systems. The authors present the diversity of approaches to dealing with environmental complexity and then encourage readers to make comparisons between these approaches and between different disciplines. Environmental Modelling: Finding Simplicity in Complexity 2nd edition is divided into four main sections: An overview of methods and approaches to modelling. State of the art for modelling environmental processes Tools used and models for management Current and future developments. The second edition evolves from the first by providing additional emphasis and material for those students wishing to specialize in environmental modelling. This edition: Focuses on simplifying complex environmental systems. Reviews current software, tools and techniques for modelling. Gives practical examples from a wide variety of disciplines, e.g. climatology, ecology, hydrology, geomorphology and engineering. Has an associated website containing colour images, links to WWW resources and chapter support pages, including data sets relating to case studies, exercises and model animations. This book is suitable for final year undergraduates and postgraduates in environmental modelling, environmental science, civil engineering and biology who will already be familiar with the subject and are moving on to specialize in the field. It is also designed to appeal to professionals interested in the environmental sciences, including environmental consultants, government employees, civil engineers, geographers, ecologists, meteorologists, and geochemists.
Download or read book Numerical Methods for Stochastic Environmental Models written by Jan Willem Stijnen and published by . This book was released on 2002 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Ecology written by P. Legendre and published by Elsevier. This book was released on 2012-08-06 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes and discusses the numerical methods which are successfully being used for analysing ecological data. These methods are derived from the fields of mathematical physics, parametric and nonparametric statistics, information theory, numerical taxonomy, archaeology, psychometry, sociometry, and others.
Download or read book Environmental Modeling written by Ekkehard Holzbecher and published by Springer Science & Business Media. This book was released on 2012-01-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has two aims: to introduce basic concepts of environmental modelling and to facilitate the application of the concepts using modern numerical tools such as MATLAB. It is targeted at all natural scientists dealing with the environment: process and chemical engineers, physicists, chemists, biologists, biochemists, hydrogeologists, geochemists and ecologists. MATLAB was chosen as the major computer tool for modeling, firstly because it is unique in it's capabilities, and secondly because it is available in most academic institutions, in all universities and in the research departments of many companies. In the 2nd edition many chapters will include updated and extended material. In addition the MATLAB command index will be updated and a new chapter on numerical methods will be added. For the second edition of 'Environmental Modeling' the first edition was completely revised. Text and figures were adapted to the recent MATLAB® version. Several chapters were extended. Correspondingly the index of MATLAB commands was extended considerably, which makes the book even more suitable to be used as a reference work by novices. Finally an introduction into numerical methods was added as a new chapter. “/p>
Download or read book Numerical Methods in Environmental Data Analysis written by Moses Eterigho Emetere and published by Elsevier. This book was released on 2022-07-17 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Environmental Data Analysis introduces environmental scientists to the numerical methods available to help answer research questions through data analysis. One challenge in data analysis is misrepresentation of datasets that are relevant directly or indirectly to the research. This book illustrates new ways of screening dataset or images for maximum utilization, introducing environmental modeling, numerical methods, and computations techniques in data analysis. Throughout the book, the author includes case studies that provide guidance on how to translate research questions into appropriate models. Individuals working with data sets or images generated from environmental monitoring centers or satellites will find this book to be a concise guide for analyzing and interpreting their data. - Bridges the theoretical underpinnings of modeling to research - Illustrates the computational resolution of environmental issues alongside the use of open-source software - Provides information on the use of analogue versus digital data treatment processes
Download or read book Efficient Numerical Methods and Information Processing Techniques for Modeling Hydro and Environmental Systems written by Reinhard Hinkelmann and published by Springer Science & Business Media. This book was released on 2006-08-10 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical simulation models have become indispensable in hydro- and environmental sciences and engineering. This monograph presents a general introduction to numerical simulation in environment water, based on the solution of the equations for groundwater flow and transport processes, for multiphase and multicomponent flow and transport processes in the subsurface as well as for flow and transport processes in surface waters. It displays in detail the state of the art of discretization and stabilization methods (e.g. finite-difference, finite-element, and finite-volume methods), parallel methods, and adaptive methods as well as fast solvers, with particular focus on explaining the interactions of the different methods. The book gives a brief overview of various information-processing techniques and demonstrates the interactions of the numerical methods with the information-processing techniques, in order to achieve efficient numerical simulations for a wide range of applications in environment water.
Download or read book Computational and Numerical Challenges in Environmental Modelling written by Zahari Zlatev and published by Elsevier. This book was released on 2006-05-02 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many large mathematical models, not only models arising and used in environmental studies, are described by systems of partial differential equations. The discretization of the spatial derivatives in such models leads to the solution of very large systems of ordinary differential equations. These systems contain many millions of equations and have to be handled over large time intervals by applying many time-steps (up to several hundred thousand time-steps). Furthermore, many scenarios are as a rule to be run. This explains the fact that the computational tasks in this situation are enormous. Therefore, it is necessary to select fast numerical methods; to develop parallel codes and, what is most important when the problems solved are very large to organize the computational process in a proper way.The last item (which is very often underestimated but, let us re-iterate, which is very important) is the major topic of this book. In fact, the proper organization of the computational process can be viewed as a preparation of templates which can be used with different numerical methods and different parallel devices. The development of such templates is described in the book. It is also demonstrated that many comprehensive environmental studies can successfully be carried out when the computations are correctly organized. Thus, this book will help the reader to understand better that, while (a) it is very important to select fast numerical methods as well as (b) it is very important to develop parallel codes, this will not be sufficient when the problems solved are really very large. In the latter case, it is also crucial to exploit better the computer architecture by organizing properly the computational process. - Use of templates in connection with the treatment of very large models - Performance of comprehensive environmental studies - Obtaining reliable and robust information about pollution levels - Studying the impact of future climatic changes on high pollution levels - Investigating trends related to critical levels of pollution
