Download or read book Advanced Modeling with the MATLAB Reservoir Simulation Toolbox written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2021-11-25 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many leading experts contribute to this follow-up to An Introduction to Reservoir Simulation using MATLAB/GNU Octave: User Guide for the MATLAB Reservoir Simulation Toolbox (MRST). It introduces more advanced functionality that has been recently added to the open-source MRST software. It is however a self-contained introduction to a variety of modern numerical methods for simulating multiphase flow in porous media, with applications to geothermal energy, chemical enhanced oil recovery (EOR), flow in fractured and unconventional reservoirs, and in the unsaturated zone. The reader will learn how to implement new models and algorithms in a robust, efficient manner. A large number of numerical examples are included, all fully equipped with code and data so that the reader can reproduce the results and use them as a starting point for their own work. Like the original textbook, this book will prove invaluable for researchers, professionals and advanced students using reservoir simulation methods. This title is available as Open Access on Cambridge Core.
Download or read book An Introduction to Reservoir Simulation Using MATLAB GNU Octave written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2019-08-08 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical methods for reservoir simulation, with efficient implementation and examples using widely-used online open-source code, for researchers, professionals and advanced students. This title is also available as Open Access on Cambridge Core.
Download or read book Unconventional Reservoir Geomechanics written by Mark D. Zoback and published by Cambridge University Press. This book was released on 2019-05-16 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the key geologic, geomechanical and engineering principles that govern the development of unconventional oil and gas reservoirs. Covering hydrocarbon-bearing formations, horizontal drilling, reservoir seismology and environmental impacts, this is an invaluable resource for geologists, geophysicists and reservoir engineers.
Download or read book Value of Information in the Earth Sciences written by Jo Eidsvik and published by Cambridge University Press. This book was released on 2015-11-19 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathering the right kind and the right amount of information is crucial for any decision-making process. This book presents a unified framework for assessing the value of potential data gathering schemes by integrating spatial modelling and decision analysis, with a focus on the Earth sciences. The authors discuss the value of imperfect versus perfect information, and the value of total versus partial information, where only subsets of the data are acquired. Concepts are illustrated using a suite of quantitative tools from decision analysis, such as decision trees and influence diagrams, as well as models for continuous and discrete dependent spatial variables, including Bayesian networks, Markov random fields, Gaussian processes, and multiple-point geostatistics. Unique in scope, this book is of interest to students, researchers and industry professionals in the Earth and environmental sciences, who use applied statistics and decision analysis techniques, and particularly to those working in petroleum, mining, and environmental geoscience.
Download or read book Plasticity and Geomechanics written by R. O. Davis and published by Cambridge University Press. This book was released on 2005-08-22 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity and Geomechanics is a concise introduction to the general subject of plasticity with a particular emphasis on applications in geomechanics. Derived from the authors' lecture notes, this book is written with students firmly in mind. Excessive use of mathematical methods is avoided and, where possible, physical interpretations are given for important concepts. The authors present a clear introduction to the complex ideas and concepts of plasticity and demonstrate how this developing subject is of critical importance to geomechanics and geotechnical engineering.
Download or read book Modeling and Simulation of Systems Using MATLAB and Simulink written by Devendra K. Chaturvedi and published by CRC Press. This book was released on 2017-12-19 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Not only do modeling and simulation help provide a better understanding of how real-world systems function, they also enable us to predict system behavior before a system is actually built and analyze systems accurately under varying operating conditions. Modeling and Simulation of Systems Using MATLAB® and Simulink® provides comprehensive, state-of-the-art coverage of all the important aspects of modeling and simulating both physical and conceptual systems. Various real-life examples show how simulation plays a key role in understanding real-world systems. The author also explains how to effectively use MATLAB and Simulink software to successfully apply the modeling and simulation techniques presented. After introducing the underlying philosophy of systems, the book offers step-by-step procedures for modeling different types of systems using modeling techniques, such as the graph-theoretic approach, interpretive structural modeling, and system dynamics modeling. It then explores how simulation evolved from pre-computer days into the current science of today. The text also presents modern soft computing techniques, including artificial neural networks, fuzzy systems, and genetic algorithms, for modeling and simulating complex and nonlinear systems. The final chapter addresses discrete systems modeling. Preparing both undergraduate and graduate students for advanced modeling and simulation courses, this text helps them carry out effective simulation studies. In addition, graduate students should be able to comprehend and conduct simulation research after completing this book.
Download or read book Multiphase Flow in Permeable Media written by Martin J. Blunt and published by Cambridge University Press. This book was released on 2017-02-16 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a fundamental description of multiphase fluid flow through porous rock, based on understanding movement at the pore, or microscopic, scale.
Download or read book Process Modelling and Simulation written by César de Prada and published by MDPI. This book was released on 2019-09-23 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since process models are nowadays ubiquitous in many applications, the challenges and alternatives related to their development, validation, and efficient use have become more apparent. In addition, the massive amounts of both offline and online data available today open the door for new applications and solutions. However, transforming data into useful models and information in the context of the process industry or of bio-systems requires specific approaches and considerations such as new modelling methodologies incorporating the complex, stochastic, hybrid and distributed nature of many processes in particular. The same can be said about the tools and software environments used to describe, code, and solve such models for their further exploitation. Going well beyond mere simulation tools, these advanced tools offer a software suite built around the models, facilitating tasks such as experiment design, parameter estimation, model initialization, validation, analysis, size reduction, discretization, optimization, distributed computation, co-simulation, etc. This Special Issue collects novel developments in these topics in order to address the challenges brought by the use of models in their different facets, and to reflect state of the art developments in methods, tools and industrial applications.
Download or read book Vehicle Propulsion Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2007-09-21 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors of this text have written a comprehensive introduction to the modeling and optimization problems encountered when designing new propulsion systems for passenger cars. It is intended for persons interested in the analysis and optimization of vehicle propulsion systems. Its focus is on the control-oriented mathematical description of the physical processes and on the model-based optimization of the system structure and of the supervisory control algorithms.
Download or read book Introduction to MATLAB for Engineers written by William John Palm and published by McGraw-Hill Medical Publishing. This book was released on 2012 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Continuous System Simulation written by François E. Cellier and published by Springer Science & Business Media. This book was released on 2006-06-03 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highly computer-oriented text, introducing numerical methods and algorithms along with the applications and conceptual tools. Includes homework problems, suggestions for research projects, and open-ended questions at the end of each chapter. Written by our successful author who also wrote Continuous System Modeling, a best-selling Springer book first published in the 1991 (sold about 1500 copies).
Download or read book MATLAB written by Scott T. Smith and published by Dog Ear Publishing. This book was released on 2006 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: After more than 20 years of development, MATLAB has evolved from a powerful matrix calculation application into a universal programming tool used extensively within scientific and engineering communities both commercial and academic. MATLAB versions 6.x and 7.x include functionality for developing advanced graphical user interfaces, GUIs, and real-time animation and graphics. GUI applications offer many advantages for users who wish to solve complex problems by providing interactivity and visual feedback. Some common examples of application areas where GUI development is desirable: . Image and Video Processing . Signal Processing . Communications . Simulation of Complex Systems . Instrumentation and Data Acquisition Interfaces . Control Systems . Financial Analysis . Animation of 2D or 3D Graphical Data This text introduces you to the capabilities of MATLAB for GUI development and covers the following areas in detail: . Handle Graphics(R) programming and low-level GUIs . High-level GUI development using GUIDE . The structure of GUIs including event processing, callbacks, timers, and real-time animation of plots / data . Advanced GUI architectures including multiple figure GUIs and image mapped interface controls Instructional examples and exercises are provided throughout each chapter that offers a hands-on approach to learning MATLAB GUI development. The M-file code for each example and exercise solution is available for download on the web to help you quickly learn how to develop your own GUIs About The Author Scott T. Smith received his MSEE degree from SUNY at Buffalo in the fields of image sensor applications and image processing. He currently works for Micron Technology Inc. in California as an Imaging Engineer and has 10 years of experience working with MATLAB and developing GUI applications. Previous work experience includes 3 years at the David Sarnoff Research Center (Former RCA Research Labs) in Princeton, NJ as an Associate Member of the Technical Staff in the Advanced Imaging Group as well 3 years as an R&D engineer for an X-ray/scientific imaging company. He is a member of SPIE and IEEE and is an author or co-author of several papers and patents in the field of imaging.
Download or read book Power System Dynamics and Stability written by Peter W. Sauer and published by . This book was released on 1998 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a one-semester senior or beginning graduate level course in power system dynamics. This text begins with the fundamental laws for basic devices and systems in a mathematical modeling context. It includes systematic derivations of standard synchronous machine models with their fundamental controls. These individual models are interconnected for system analysis and simulation. Singular perturbation is used to derive and explain reduced-order models.
Download or read book Simulation of ODE PDE Models with MATLAB OCTAVE and SCILAB written by Alain Vande Wouwer and published by Springer. This book was released on 2014-06-07 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation of ODE/PDE Models with MATLAB®, OCTAVE and SCILAB shows the reader how to exploit a fuller array of numerical methods for the analysis of complex scientific and engineering systems than is conventionally employed. The book is dedicated to numerical simulation of distributed parameter systems described by mixed systems of algebraic equations, ordinary differential equations (ODEs) and partial differential equations (PDEs). Special attention is paid to the numerical method of lines (MOL), a popular approach to the solution of time-dependent PDEs, which proceeds in two basic steps: spatial discretization and time integration. Besides conventional finite-difference and element techniques, more advanced spatial-approximation methods are examined in some detail, including nonoscillatory schemes and adaptive-grid approaches. A MOL toolbox has been developed within MATLAB®/OCTAVE/SCILAB. In addition to a set of spatial approximations and time integrators, this toolbox includes a collection of application examples, in specific areas, which can serve as templates for developing new programs. Simulation of ODE/PDE Models with MATLAB®, OCTAVE and SCILAB provides a practical introduction to some advanced computational techniques for dynamic system simulation, supported by many worked examples in the text, and a collection of codes available for download from the book’s page at www.springer.com. This text is suitable for self-study by practicing scientists and engineers and as a final-year undergraduate course or at the graduate level.
Download or read book Seismic Reservoir Modeling written by Dario Grana and published by John Wiley & Sons. This book was released on 2021-05-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic reservoir characterization aims to build 3-dimensional models of rock and fluid properties, including elastic and petrophysical variables, to describe and monitor the state of the subsurface for hydrocarbon exploration and production and for CO2 sequestration. Rock physics modeling and seismic wave propagation theory provide a set of physical equations to predict the seismic response of subsurface rocks based on their elastic and petrophysical properties. However, the rock and fluid properties are generally unknown and surface geophysical measurements are often the only available data to constrain reservoir models far away from well control. Therefore, reservoir properties are generally estimated from geophysical data as a solution of an inverse problem, by combining rock physics and seismic models with inverse theory and geostatistical methods, in the context of the geological modeling of the subsurface. A probabilistic approach to the inverse problem provides the probability distribution of rock and fluid properties given the measured geophysical data and allows quantifying the uncertainty of the predicted results. The reservoir characterization problem includes both discrete properties, such as facies or rock types, and continuous properties, such as porosity, mineral volumes, fluid saturations, seismic velocities and density. Seismic Reservoir Modeling: Theory, Examples and Algorithms presents the main concepts and methods of seismic reservoir characterization. The book presents an overview of rock physics models that link the petrophysical properties to the elastic properties in porous rocks and a review of the most common geostatistical methods to interpolate and simulate multiple realizations of subsurface properties conditioned on a limited number of direct and indirect measurements based on spatial correlation models. The core of the book focuses on Bayesian inverse methods for the prediction of elastic petrophysical properties from seismic data using analytical and numerical statistical methods. The authors present basic and advanced methodologies of the current state of the art in seismic reservoir characterization and illustrate them through expository examples as well as real data applications to hydrocarbon reservoirs and CO2 sequestration studies.
Download or read book Shale Gas and Tight Oil Reservoir Simulation written by Wei Yu and published by Gulf Professional Publishing. This book was released on 2018-07-29 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shale Gas and Tight Oil Reservoir Simulation delivers the latest research and applications used to better manage and interpret simulating production from shale gas and tight oil reservoirs. Starting with basic fundamentals, the book then includes real field data that will not only generate reliable reserve estimation, but also predict the effective range of reservoir and fracture properties through multiple history matching solutions. Also included are new insights into the numerical modelling of CO2 injection for enhanced oil recovery in tight oil reservoirs. This information is critical for a better understanding of the impacts of key reservoir properties and complex fractures. - Models the well performance of shale gas and tight oil reservoirs with complex fracture geometries - Teaches how to perform sensitivity studies, history matching, production forecasts, and economic optimization for shale-gas and tight-oil reservoirs - Helps readers investigate data mining techniques, including the introduction of nonparametric smoothing models
Download or read book Sliding Mode Control Using MATLAB written by Jinkun Liu and published by Academic Press. This book was released on 2017-05-25 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sliding Mode Control Using MATLAB provides many sliding mode controller design examples, along with simulation examples and MATLAB® programs. Following the review of sliding mode control, the book includes sliding mode control for continuous systems, robust adaptive sliding mode control, sliding mode control for underactuated systems, backstepping, and dynamic surface sliding mode control, sliding mode control based on filter and observer, sliding mode control for discrete systems, fuzzy sliding mode control, neural network sliding mode control, and sliding mode control for robot manipulators. The contents of each chapter are independent, providing readers with information they can use for their own needs. It is suitable for the readers who work on mechanical and electronic engineering, electrical automation engineering, etc., and can also be used as a teaching reference for universities. - Provides many sliding mode controller design examples to help readers solve their research and design problems - Includes various, implementable, robust sliding mode control design solutions from engineering applications - Provides the simulation examples and MATLAB programs for each sliding mode control algorithm
