Download or read book Radiation Technology for Advanced Materials written by Guozhong Wu and published by Academic Press. This book was released on 2018-11-26 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiation Technology for Advanced Materials presents a range of radiation technology applications for advanced materials. The book aims to bridge the gap between researchers and industry, describing current uses and future prospects. It describes the mature radiation processing technology used in preparing heat shrinkable materials and in wire and cable materials, giving commercial cases. In addition, the book illustrates future applications, including high-performance fibers, special self-lubricating materials, special ultra-fine powder materials, civil fibers, natural polymeric materials, battery separator membranes, special filtration materials and metallic nanomaterials. Chapters cover radiation technology in high-performance fiber and functional textiles, radiation crosslinking and typical applications, radiation crosslinking for polymer foaming material, radiation degradation and application, radiation emulsion polymerization, radiation effects of ionic liquids, radiation technology in advanced new materials, and future prospects. Presents a range of radiation technology applications and their application to advanced materials Covers the mature radiation processing technology used to prepare heat shrinkable materials and wire cable materials, describing real-world commercial applications Shows the promising application of radiation technology in preparing high-performance Si and carbon fibers Describes the radiation degradation/radiation effect used to prepare fine powder materials Discusses radiation modification and radiation grafting techniques used to synthesize materials, such as civil fibers, natural polymeric materials and others

Download or read book Advanced Materials written by Ajit Behera and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the essential topics in modern materials science. It brings together the spectrum of materials science topics, spanning inorganic and organic materials, nanomaterials, biomaterials, and alloys within a single cohesive and comprehensive resource. Synthesis and processing techniques, structural and crystallographic configurations, properties, classifications, process mechanisms, applications, and related numerical problems are discussed in each chapter. End-of-chapter summaries and problems are included to deepen and reinforce the reader's comprehension. Provides a cohesive and comprehensive reference on a wide range of materials and processes in modern materials science; Presents material in an engaging manner to encourage innovative practices and perspectives; Includes chapter summaries and problems at the end of every chapter for reinforcement of concepts.

Download or read book Lithium Ion Batteries written by Xianxia Yuan and published by CRC Press. This book was released on 2016-04-19 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a group of top scientists and engineers in academic and industrial R&D, Lithium-Ion Batteries: Advanced Materials and Technologies gives a clear picture of the current status of these highly efficient batteries. Leading international specialists from universities, government laboratories, and the lithium-ion battery industry share th

Download or read book Advanced Materials Science Technology in China A Roadmap to 2050 written by Ke Lu and published by Springer Science & Business Media. This book was released on 2010-08-09 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the eighteen field-specific reports comprising the comprehensive scope of the strategic general report of the Chinese Academy of Sciences, this sub-report addresses long-range planning for developing science and technology in the field of advanced materials science. They each craft a roadmap for their sphere of development to 2050. In their entirety, the general and sub-group reports analyze the evolution and laws governing the development of science and technology, describe the decisive impact of science and technology on the modernization process, predict that the world is on the eve of an impending S&T revolution, and call for China to be fully prepared for this new round of S&T advancement. Based on the detailed study of the demands on S&T innovation in China's modernization, the reports draw a framework for eight basic and strategic systems of socio-economic development with the support of science and technology, work out China's S&T roadmaps for the relevant eight basic and strategic systems in line with China's reality, further detail S&T initiatives of strategic importance to China's modernization, and provide S&T decision-makers with comprehensive consultations for the development of S&T innovation consistent with China's reality. Supported by illustrations and tables of data, the reports provide researchers, government officials and entrepreneurs with guidance concerning research directions, the planning process, and investment. Founded in 1949, the Chinese Academy of Sciences is the nation's highest academic institution in natural sciences. Its major responsibilities are to conduct research in basic and technological sciences, to undertake nationwide integrated surveys on natural resources and ecological environment, to provide the country with scientific data and consultations for government's decision-making, to undertake government-assigned projects with regard to key S&T problems in the process of socio-economic development, to initiate personnel training, and to promote China's high-tech enterprises through its active engagement in these areas.

Download or read book The Advanced Materials Revolution written by Sanford L. Moskowitz and published by John Wiley & Sons. This book was released on 2009-01-20 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of the economic and global impacts of the advanced materials industry This book represents the first comprehensive investigation of the emerging international advanced materials industry and its profound impact on the world's industrialized and newly emerging economies. It examines the ways in which science, technology, business, and markets have converged to produce one of the most dynamic industries in recent years—one that is increasingly controlling global technological progress as a whole. From the unique vantage point of this crucial industry, this book illuminates the major differences in how the world's two economic superpowers—the United States and the European Union—perceive and carry forward the technology creation process and what these differences mean for achieving national and regional competitive advantage in the twenty-first century. It draws upon a rich body of source materials spanning from 1970 through 2007 as well as actual in-depth interviews and internal corporate and governmental documentation. The book is organized thematically, with each section highlighting critical perspectives on the rise of the international advanced materials industry and its impact on the relative competitiveness of the United States and the European Union. It concludes with a discussion of how what we have learned about advanced materials in the West tells us of the future competitive power of an emerging Asia. The Advanced Materials Revolution is essential reading for researchers, executives, and managers working in the advanced materials and related technological fields, as well as professionals and scholars in the academic, investment, consulting, and government communities. It also serves as a valuable case study textbook for advanced undergraduate and graduate courses in business, management, entrepreneurship, technology studies, chemical and materials engineering, economics, economic history, and regional and economic development.

Download or read book Science and Technology of Polymers and Advanced Materials written by Omari V. Mukbaniani and published by CRC Press. This book was released on 2019-09-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing interest in lightweight and high-performance materials is leading to significant research activity in the area of polymers and composites. One recent focus is to develop multifunctional materials that have more than one property tailored as to the specified design requirements, in addition to achieving low density. The possibility of simultaneously tailoring several desired properties is attractive but very challenging, and it requires significant advancement in the science and technology of high-performance functional polymers and composites. This volume presents a selection of new approaches in the field of composites and nanomaterials, polymer synthesis and applications, and materials and their properties. Some composites/nanocomposites and interfaces are explored as well, some with medical applications. The authors also look at simulations and modeling, synthesis involving photochemistry, self-assembled hydrogels, and sol-gel processing.

Download or read book Advanced Materials for High Technology Applications written by Dragan P. Uskoković and published by Trans Tech Publication. This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern technology depends upon advanced materials. Life as we know it would hardly be possible without the highly specialized knowledge that has resulted from the extensive scientific research of the 20th Century.

Download or read book Electrochemical Energy written by Pei Kang Shen and published by CRC Press. This book was released on 2018-10-08 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical Energy: Advanced Materials and Technologies covers the development of advanced materials and technologies for electrochemical energy conversion and storage. The book was created by participants of the International Conference on Electrochemical Materials and Technologies for Clean Sustainable Energy (ICES-2013) held in Guangzhou, China, and incorporates select papers presented at the conference. More than 300 attendees from across the globe participated in ICES-2013 and gave presentations in six major themes: Fuel cells and hydrogen energy Lithium batteries and advanced secondary batteries Green energy for a clean environment Photo-Electrocatalysis Supercapacitors Electrochemical clean energy applications and markets Comprised of eight sections, this book includes 25 chapters featuring highlights from the conference and covering every facet of synthesis, characterization, and performance evaluation of the advanced materials for electrochemical energy. It thoroughly describes electrochemical energy conversion and storage technologies such as batteries, fuel cells, supercapacitors, hydrogen generation, and their associated materials. The book contains a number of topics that include electrochemical processes, materials, components, assembly and manufacturing, and degradation mechanisms. It also addresses challenges related to cost and performance, provides varying perspectives, and emphasizes existing and emerging solutions. The result of a conference encouraging enhanced research collaboration among members of the electrochemical energy community, Electrochemical Energy: Advanced Materials and Technologies is dedicated to the development of advanced materials and technologies for electrochemical energy conversion and storage and details the technologies, current achievements, and future directions in the field.

Download or read book Advanced Materials in Automotive Engineering written by Jason Rowe and published by Elsevier. This book was released on 2012-02-21 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry is under constant pressure to design vehicles capable of meeting increasingly demanding challenges such as improved fuel economy, enhanced safety and effective emission control. Drawing on the knowledge of leading experts, Advanced materials in automotive engineering explores the development, potential and impact of using such materials.Beginning with a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications, Advanced materials in automotive engineering goes on to consider nanostructured steel for automotive body structures, aluminium sheet and high pressure die-cast aluminium alloys for automotive applications, magnesium alloys for lightweight powertrains and automotive bodies, and polymer and composite moulding technologies. The final chapters then consider a range of design and manufacturing issues that need to be addressed when working with advanced materials, including the design of advanced automotive body structures and closures, technologies for reducing noise, vibration and harshness, joining systems, and the recycling of automotive materials.With its distinguished editor and international team of contributors, Advanced materials in automotive engineering is an invaluable guide for all those involved in the engineering, design or analysis of motor vehicle bodies and components, as well as all students of automotive design and engineering. Explores the development, potential and impact of using advanced materials for improved fuel economy, enhanced safety and effective mission control in the automotive industry Provides a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications Covers a range of design ideas and manufacturing issues that arise when working with advanced materials, including technologies for reducing noise, vibration and harshness, and the recycling of automotive materials

Download or read book Advanced Materials written by Shun-Hsyung Chang and published by Springer Science & Business Media. This book was released on 2014-03-25 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced materials are the basis of modern science and technology. This proceedings volume presents a broad spectrum of studies of novel materials covering their processing techniques, physics, mechanics, and applications. The book is concentrated on nanostructures, ferroelectric crystals, materials and composites, materials for solar cells and also polymeric composites. Nanotechnology approaches, modern piezoelectric techniques and also latest achievements in materials science, condensed matter physics, mechanics of deformable solids and numerical methods are presented. Great attention is devoted to novel devices with high accuracy, longevity and extended possibilities to work in wide temperature and pressure ranges, aggressive media etc. The characteristics of materials and composites with improved properties opening new possibilities of various physical processes, in particular transmission and receipt of signals under water, are described.

Download or read book Food Packaging written by Sanjay Mavinkere Rangappa and published by CRC Press. This book was released on 2020-10-20 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Packaging: Advanced Materials, Technologies, and Innovations is a one-stop reference for packaging materials researchers working across various industries. With chapters written by leading international researchers from industry, academia, government, and private research institutions, this book offers a broad view of important developments in food packaging. Presents an extensive survey of food packaging materials and modern technologies Demonstrates the potential of various materials for use in demanding applications Discusses the use of polymers, composites, nanotechnology, hybrid materials, coatings, wood-based, and other materials in packaging Describes biodegradable packaging, antimicrobial studies, and environmental issues related to packaging materials Offers current status, trends, opportunities, and future directions Aimed at advanced students, research scholars, and professionals in food packaging development, this application-oriented book will help expand the reader’s knowledge of advanced materials and their use of innovation in food packaging.

Download or read book Advances in Sustainable Machining and Manufacturing Processes written by Kishor Kumar Gajrani and published by CRC Press. This book was released on 2022-05-18 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an in-depth overview of sustainability in machining processes, challenges during machining of difficult-to-cut materials and different ways of green machining in achieving sustainability. It discusses important topics including green and sustainable machining, dry machining, textured cutting coated tools for machining, solid lubricants-based machining, gas-cooled machining, cryogenic cooling for intelligent machining, artificial neural network for machining, big data based machining, and hybrid intelligent machining. This book- Covers advances in sustainable machining such as gas-cooled machining, near dry machining, and minimum quantity lubrication. Explores use of big data, machine learning and artificial intelligence for machining processes. Provides case studies and experimental design as well as results with analysis focusing on achieving sustainability. Discusses artificial intelligence and machine learning based machining processes. Cover the latest applications of sustainable manufacturing for a better understanding of the concepts. The text is primarily written for senior undergraduate, graduate students, and researchers in the fields of mechanical, manufacturing, industrial, production engineering and materials science.

Download or read book Advanced Materials for Electromagnetic Shielding written by Maciej Jaroszewski and published by John Wiley & Sons. This book was released on 2018-11-29 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the field of materials that shield people and sensitive electronic devices from electromagnetic fields Advanced Materials for Electromagnetic Shielding offers a thorough review of the most recent advances in the processing and characterization of the electromagnetic shielding materials. In this groundbreaking book, the authors—noted experts in the field—discuss the fundamentals of shielding theory as well as the practice of electromagnetic field measuring techniques and systems. They also explore applications of shielding materials used as absorbers of electromagnetic radiation, or as magnetic shields and explore coverage of new advanced materials for EMI shielding in aerospace applications. In addition, the text contains methods of preparation and applicability of metal foams. This comprehensive text examines the influence of technology on the micro-and macrostructure of polymers enabling their use in screening technology, technologies of shielding materials based on textiles, and analyses of its effectiveness in screening. The book also details the method of producing nanowires and their applications in EM shielding. This important resource: Explores the burgeoning market of electromagnetic shielding materials as we create, depend upon, and are exposed to more electronic devices than ever Addresses the most comprehensive issues relating to electromagnetic fields Contains information on the manufacturing, characterization methods, and properties of materials used to protect against them Discusses the important characterization techniques compared with one another, thus allowing scientists to select the best approach to a problem Written for materials scientists, electrical and electronics engineers, physicists, and industrial researchers, Advanced Materials for Electromagnetic Shielding explores all aspects in the area of electromagnetic shielding materials and examines the current state-of-the-art and new challenges in this rapidly growing area.

Download or read book Advanced Materials and Systems for Electrochemical Technologies written by Mauro Coelho dos Santos and published by Nova Science Publishers. This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book concerns advanced materials for electrochemical technologies. Firstly, the focus concerns fuel cell devices in which state of the art materials for anodes in both fuel cells and biological fuel cells were carefully discussed. After that, novel sensors and biosensors were deeply described. Finally, the wastewater treatment using advanced oxidation processes was pointed out, taking into account anodes and/or cathodes evidencing materials and processes. Briefly, energy, bio-applications and environmental approaches were discussed using electrochemistry as the main tool"--

Download or read book Advanced Carbon Materials and Technology written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2014-01-28 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The expansion of carbon materials is multidisciplinary and is related to physics, chemistry, biology, applied sciences and engineering. The research on carbon materials has mostly focused on aspects of fundamental physics as they unique electrical, thermal and mechanical properties applicable for the range of applications. The electrons in graphene and other derived carbon materials behave as dirac fermions due to their interaction with the ions of the lattice. This direction has led to the discovery of new phenomena such as Klein tunneling in carbon based solid state systems and the so-called half-integer quantum Hall effect. Advanced Carbon Materials and Technology presents cutting-edge chapters on the processing, properties and technological developments of graphene, carbon nanotubes, carbon fibers, carbon particles and other carbon based structures including multifunctional graphene sheets, graphene quantum dots, bulky balls, carbon balls, and their polymer composites. This book brings together respected international scholars writing on the innovative methodologies and strategies adopted in carbon materials research area including Synthesis, characterization and functionalization of carbon nanotubes and graphene Surface modification of graphene Carbon based nanostructured materials Graphene and carbon nanotube based electrochemical (bio)sensors for environmental monitoring Carbon catalysts for hydrogen storage materials Optical carbon nanoobjects Graphene and carbon nanotube based biosensors Carbon doped cryogel films Bioimpact of carbon nanomaterials Photocatalytic nature of carbon nanotube based composites Engineering behavior of ash fills Fly ash syntactic foams microstructure

Download or read book Advanced Materials for the Conservation of Stone written by Majid Hosseini and published by Springer. This book was released on 2018-01-22 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book identifies novel advanced materials that can be utilized as protective agents for the preservation of stone. The innovative solutions to stone conservation presented here result in increased sustainability, reduced environmental impact, and increased social and economic benefits. It provides an overview of recent trends and progress in advanced materials applied to stone protection. It also explores the scientific principles behind these advanced materials and discusses their applications to diff erent types of stone preservation efforts. Essential information as well as knowledge on the availability and applicability of advanced nanostructured materials is also provided, with focus placed on the practical aspects of stone protection. Th e book highlights an interdisciplinary eff ort regarding novel applications of nanostructured materials in the advancement of stone protection. It provides insight towards forthcoming developments in the fi eld. Advanced nanostructured materials are designed and developed with the aim of being chemically, physically, and mechanically compatible with stone. Advanced materials for stone conservation that are characterized by several functional properties are considered in this book. These include the physico-chemical, protective, and morphological properties, eco-toxicity, and mechanisms of degradation. The authors present a thorough overview of cutting–edge discoveries, detailed information on recent technological developments, breakthroughs in novel nanomaterials, utilization strategies for applications in cultural heritage, and the current status and future outlook of the topic to address a wide range of scientific communities.

Download or read book Advanced Solar Cell Materials Technology Modeling and Simulation written by Fara, Laurentiu and published by IGI Global. This book was released on 2012-07-31 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: While measuring the effectiveness of solar cell materials may not always be practical once a device has been created, solar cell modeling may allow researchers to obtain prospective analyses of the internal processes of potential materials prior to their manufacture. Advanced Solar Cell Materials, Technology, Modeling, and Simulation discusses the development and use of modern solar cells made from composite materials. This volume is targeted toward experts from universities and research organizations, as well as young professionals interested in pursuing different subjects regarding advanced solar cells.