Download or read book Materials and Technologies in Mechanical Engineering written by Dmitry А. Chinakhov and published by Trans Tech Publications Ltd. This book was released on 2018-10-30 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only
Download or read book Externally Bonded FRP Reinforcement for RC Structures written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2001-01-01 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: In December 1996, the then CEB established a Task Group with the main objective to elaborate design guidelines for the use of FRP reinforcement in accordance with the design format of the CEB-FIP Model Code and Eurocode2. With the merger of CEB and FIP into fib in 1998, this Task Group became fib TG 9.3 FRP Reinforcement for concrete structures in Commission 9 Reinforcing and Prestressing Materials and Systems. The Task Group consists of about 60 members, representing most European universities, research institutes and industrial companies working in the field of advanced composite reinforcement for concrete structures, as well as corresponding members from Canada, Japan and USA. Meetings are held twice a year and on the research level its work is supported by the EU TMR (European Union Training and Mobility of Researchers) Network "ConFibreCrete”. The work of fib TG 9.3 is performed by five working parties (WP): Material Testing and Characterization (MT&C) Reinforced Concrete (RC) Prestressed Concrete (PC) Externally Bonded Reinforcement (EBR) Marketing and Applications (M&A) This technical report constitutes the work conducted as of to date by the EBR party. This bulletin gives detailed design guidelines on the use of FRP EBR, the practical execution and the quality control, based on the current expertise and state-of-the-art knowledge of the task group members. It is regarded as a progress report since it is not the aim of this report to cover all aspects of RC strengthening with composites. Instead, it focuses on those aspects that form the majority of the design problems. several of the topics presented are subject of ongoing research and development, and the details of some modelling approaches may be subject to future revisions. as knowledge in this field is advancing rapidly, the work of the EBR WP will continue. Inspite of this limit in scope, considerable effort has been made to present a bulletin that is today’s state-of-art in the area of strengthening of concrete structures by means of externally bonded FRP reinforcement.
Download or read book Ceramic Matrix Composites written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2014-10-27 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive source of information on various aspects of ceramic matrix composites (CMC). It covers ceramic and carbon fibers; the fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration and joining. Each chapter in the book is written by specialists and internationally renowned researchers in the field. This book will provide state-of-the-art information on different aspects of CMCs. The book will be directed to researchers working in industry, academia, and national laboratories with interest and professional competence on CMCs. The book will also be useful to senior year and graduate students pursuing degrees in ceramic science and engineering, materials science and engineering, aeronautical, mechanical, and civil or aerospace engineering. Presents recent advances, new approaches and discusses new issues in the field, such as foreign object damage, life predictions, multiscale modeling based on probabilistic approaches, etc. Caters to the increasing interest in the application of ceramic matrix composites (CMC) materials in areas as diverse as aerospace, transport, energy, nuclear, and environment. CMCs are considered ans enabling technology for advanced aeropropulsion, space propulsion, space power, aerospace vehicles, space structures, as well as nuclear and chemical industries. Offers detailed descriptions of ceramic and carbon fibers; fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration/joining.
Download or read book Proceedings of the 28th International Symposium on Mine Planning and Equipment Selection MPES 2019 written by Erkan Topal and published by Springer Nature. This book was released on 2019-11-29 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference proceedings presents the research papers in the field of mine planning and mining equipment including themes such as mine automation, rock mechanics, drilling, blasting, tunnelling and excavation engineering. The papers presents the recent advancement and the application of a range of technologies in the field of mining industry. It is of interest to the professionals who practice in mineral industry including but not limited to engineers, consultants, managers, academics, scientist, and government staff.
Download or read book International Standard Classification of Occupations written by International Labour Office and published by International Labor Office. This book was released on 2012 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Standard Classification of Occupations 2008 (ISCO-08) is a four-level hierarchically structured classification that covers all jobs in the world. Developed with the benefit of accumulated national and international experience as well as the help of experts from many countries and agencies, ISCO-08 is fully supported by the international community as an accepted standard for international labour statistics. ISCO-08 classifies jobs into 436 unit groups. These unit groups are aggregated into 130 minor groups, 43 sub-major groups and 10 major groups, based on their similarity in terms of the skill level and skill specialisation required for the jobs. This allows the production of relatively detailed internationally comparable data as well as summary information for only 10 groups at the highest level of aggregation. Each group in the classification is designated by a title and code number and is associated with a definition that specifies the scope of the group. The classification is divided into two volumes: Volume I presents the structure and definitions of all groups in ISCO-08 and their correspondence with ISCO-88, which it supersedes, while Volume II provides an updated and expanded index of occupational titles and associated ISCO-08 and ISCO-88 codes.
Download or read book Canadian Almanac Directory 2015 written by Tannys Williams and published by . This book was released on 2014-10 with total page 2528 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Canadian Almanac & Directory is the most complete source of Canadian information available - cultural, professional and financial institutions, legislative, governmental, judicial and educational organizations. Canada's authoritative sourcebook for al
Download or read book High Strength Concrete written by Michael A. Caldarone and published by CRC Press. This book was released on 2014-04-21 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical book from a highly experienced author presents clearly the means and methods for designing, producing and using high-strength concrete. High-strength concrete offers many benefits. Higher compressive strengths allow for a reduction in the cross-sectional dimensions of columns and walls in buildings. Its greater stiffness allows for increasing building heights while controlling sway and occupant comfort. Civil structures such as bridges have benefited from greater span lengths, shallower beam sections, wider girder spacing, and extended service life. Illustrated with real life examples, through documented case histories, High-Strength Concrete will be a valuable resource for contractors, producers, inspection agencies, as well as engineers and researchers.
Download or read book Geomechanics and Geodynamics of Rock Masses written by Vladimir Litvinenko and published by CRC Press. This book was released on 2018-05-15 with total page 1670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomechanics and Geodynamics of Rock Masses contains contributions presented at EUROCK 2018, the 2018 International Symposium of the International Society for Rock Mechanics (ISRM 2018, Saint Petersburg, Russia, 22-26 May 2018). Dedicated to recent advances and achievements in the fields of geomechanics and geotechnology, the main topics of the book include: - Physical and mechanical properties of fractured rock (laboratory testing and rock properties, field measurements and site investigations) - Geophysics in rock mechanics - Rock mass strength and failure - Nonlinear problems in rock mechanics - Effect of joint water on the behavior of rock foundation - Numerical modeling and back analysis - Mineral resources development: methods and rock mechanics problems - Rock mechanics and underground construction in mining, hydropower industry and civil engineering - Rock mechanics in petroleum engineering - Geodynamics and monitoring of rock mass behavior - Risks and hazards - Geomechanics of technogenic deposits Geomechanics and Geodynamics of Rock Masses will be of interest to researchers and professionals involved in the various branches of rock mechanics and rock engineering. EUROCK 2018, organized by the Saint Petersburg Mining University, is a continuation of the successful series of ISRM symposia in Europe, which began in 1992 in Chester, UK.
Download or read book Electro Fenton Process written by Minghua Zhou and published by Springer. This book was released on 2017-11-25 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the theoretical fundamentals and potential applications of the original electro-Fenton (EF) process and its most innovative and promising versions, all of which are classified as electrochemical advanced oxidation processes. It consists of 15 chapters that review the latest advances and trends, material selection, reaction and reactor modeling and EF scale-up. It particularly focuses on the applications of EF process in the treatment of toxic and persistent organic pollutants in water and soil, showing highly efficient removal for both lab-scale and pre-pilot setups. Indeed, the EF technology is now mature enough to be brought to market, and this collection of contributions from leading experts in the field constitutes a timely milestone for scientists and engineers.
Download or read book Geomechanics and Geodynamics of Rock Masses Volume 2 written by Vladimir Litvinenko and published by CRC Press. This book was released on 2018-05-20 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is Volume 2 of the EUROCK 2018 proceedings. Geomechanics and Geodynamics of Rock Masses contains contributions presented at EUROCK 2018, the 2018 International Symposium of the International Society for Rock Mechanics (ISRM 2018, Saint Petersburg, Russia, 22-26 May 2018). Dedicated to recent advances and achievements in the fields of geomechanics and geotechnology, the main topics of the book include: - Physical and mechanical properties of fractured rock (laboratory testing and rock properties, field measurements and site investigations) - Geophysics in rock mechanics - Rock mass strength and failure - Nonlinear problems in rock mechanics - Effect of joint water on the behavior of rock foundation - Numerical modeling and back analysis - Mineral resources development: methods and rock mechanics problems - Rock mechanics and underground construction in mining, hydropower industry and civil engineering - Rock mechanics in petroleum engineering - Geodynamics and monitoring of rock mass behavior - Risks and hazards - Geomechanics of technogenic deposits Geomechanics and Geodynamics of Rock Masses will be of interest to researchers and professionals involved in the various branches of rock mechanics and rock engineering. EUROCK 2018, organized by the Saint Petersburg Mining University, is a continuation of the successful series of ISRM symposia in Europe, which began in 1992 in Chester, UK.
Download or read book Mining goes Digital written by Christoph Mueller and published by CRC Press. This book was released on 2019-05-22 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conferences on ‘Applications for Computers and Operations Research in the Minerals Industry’ (APCOM) initially focused on the optimization of geostatistics and resource estimation. Several standard methods used in these fields were presented in the early days of APCOM. While geostatistics remains an important part, information technology has emerged, and nowadays APCOM not only focuses on geostatistics and resource estimation, but has broadened its horizon to Information and Communication Technology (ICT) in the mineral industry. Mining Goes Digital is a collection of 90 high quality, peer reviewed papers covering recent ICT-related developments in: - Geostatistics and Resource Estimation - Mine Planning - Scheduling and Dispatch - Mine Safety and Mine Operation - Internet of Things, Robotics - Emerging Technologies - Synergies from other industries - General aspects of Digital Transformation in Mining Mining Goes Digital will be of interest to professionals and academics involved or interested in the above-mentioned areas.
Download or read book Manufacturing Systems Theory and Practice written by George Chryssolouris and published by Springer Science & Business Media. This book was released on 2006-02-28 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overviews manufacturing systems from the ground up, following the same concept as in the first edition. Delves into the fundamental building blocks of manufacturing systems: manufacturing processes and equipment. Discusses all topics from the viewpoint of four fundamental manufacturing attributes: cost, rate, flexibility and quality.
Download or read book Memoirs written by Jean Monnet and published by Garden City, N.Y. : Doubleday. This book was released on 1978 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Traditional Ecological Knowledge and Natural Resource Management written by Charles R. Menzies and published by U of Nebraska Press. This book was released on 2006-01-01 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditional Ecological Knowledge and Natural Resource Management examines how traditional ecological knowledge (TEK) is taught and practiced today among Native communities. Of special interest is the complex relationship between indigenous ecological practices and other ways of interacting with the environment, particularly regional and national programs of natural resource management. Focusing primarily on the northwest coast of North America, scholars look at the challenges and opportunities confronting the local practice of indigenous ecological knowledge in a range of communities, including the Tsimshian, the Nisga’a, the Tlingit, the Gitksan, the Kwagult, the Sto:lo, and the northern Dene in the Yukon. The experts consider how traditional knowledge is taught and learned and address the cultural importance of different subsistence practices using natural elements such as seaweed (Gitga’a), pine mushrooms (Tsimshian), and salmon (Tlingit). Several contributors discuss the extent to which national and regional programs of resource management need to include models of TEK in their planning and execution. This volume highlights the different ways of seeing and engaging with the natural world and underscores the need to acknowledge and honor the ways that indigenous peoples have done so for generations.
Download or read book Electron Nano Imaging written by Nobuo Tanaka and published by Springer. This book was released on 2017-04-04 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the bases of imaging and diffraction in transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) are explained in the style of a textbook. The book focuses on the explanation of electron microscopic imaging of TEM and STEM without including in the main text distracting information on basic knowledge of crystal diffraction, wave optics, electron lens, and scattering and diffraction theories, which are explained separately in the appendices. A comprehensive explanation is provided on the basis of Fourier transform theory, and this approach is unique in comparison with other advanced resources on high-resolution electron microscopy. With the present textbook, readers are led to understand the essence of the imaging theories of TEM and STEM without being diverted by other knowledge of electron microscopy. The up-to-date information in this book, particularly on imaging details of STEM and aberration corrections, is valuable worldwide for today’s graduate students and professionals just starting their careers.
Download or read book Proposed Healy Clean Coal Project written by and published by . This book was released on 1993 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book National Semiconductor Metrology Program written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1995 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: