Download or read book 1st International Conference On New Materials for Extreme Environment written by and published by . This book was released on 2008 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of materials designed for application in extreme environments is a very active field of research. In recent years, it has been realized by the materials science community that solutions to demanding applications in different fields can be identified by implementing common materials concepts. Research effort and technological development, driven by application requirements, are now a bridge between apparently separate communities. As first realized by the European Integrated Project "ExtreMat - New Materials for Extreme Applications", common materials solutions are now being sought and found in the fields of thermal management materials, protective materials, radiation-resistant materials, bonding and interfaces, as well as advanced materials characterization and application-oriented testing. This special collection is divided into: I. Overview; II. Protection Materials; III. Heat Sinks; IV. Bonding and Interfaces; V. Radiation-Resistant Materials; VI. Advanced Materials Characterization and Testing. It provides incomparable coverage of the current state of the art.

Download or read book Advanced Materials for Applications in Extreme Environments written by C. C. Fu and published by . This book was released on 2011 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Materials for Applications in Extreme Environments Volume 1298 written by Maria Samaras and published by Materials Research Society. This book was released on 2011-04-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symposium Q, "Structural Materials and Fuels for Future Fusion and Fission Technologies," Symposium R, "Radiation Damage to Ceramic and Insulating Materials for Nuclear Power," and Symposium T, "Nanostructured Materials in Harsh Environments," were held Nov. 29-Dec. 3 at the 2010 MRS Fall Meeting in Boston, Massachusetts. The underlying theme behind the papers is that of materials for next-generation technologies, especially fusion and fission energy production and the nanoscale properties of these materials when subjected to high temperature and pressure. In many cases, joint experimental and modeling programs to minimize expensive trial-and-error techniques are underway to understand the fundamental processes that are at the basis of the materials. This combined approach is optimal to design novel new materials that can withstand the higher operating temperature, high radiation doses, and complex thermomechanical loading required in the next-generation nuclear systems. This volume highlights some emerging topics in novel mechanical testing techniques, in situ microscopy, high- and low-temperature deformation mechanisms, radiation damage investigations and mechanical property characterization of materials, as well as recent advances in atomistic and multiscale modeling.

Download or read book 1st International Conference on New Materials for Extreme Environments written by Ch Linsmeier and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS).The development of materials designed for application in extreme environments is a very active field of research. In recent years, it has been realized by the materials science community that solutions to demanding applications in different fields can be identified by implementing common materials concepts. Research effort and technological development, driven by application requirements, are now a bridge between apparently separate communities. As first realized by the European Integrated Project "ExtreMat - New Materials for Extreme Applications", common materials solutions are now being sought and found in the fields of thermal management materials, protective materials, radiation-resistant materials, bonding and interfaces, as well as advanced materials characterization and application-oriented testing. This special collection is divided into: I. Overview; II. Protection Materials; III. Heat Sinks; IV. Bonding and Interfaces; V. Radiation-Resistant Materials; VI. Advanced Materials Characterization and Testing.It provides incomparable coverage of the current state of the art. The 58 papers in this collection were selected from those presented during the 1st International Conference on New Materials for Extreme Environments held in San Sebastian, Spain, in June 2008. The purpose of the conference was to unite materials researchers to discuss materials solutions in the areas of nuclear fission, advanced nuclear fission, electronics, space, and others. The general topics reflect those discussions and include: protection materials, heat sinks, bonding and interfaces, radiation resistant materials, and advanced materials characterization and testing. Editors are Linsmeier and Reinelt, for whom no background information is given.

Download or read book 1st International Conference On New Materials for Extreme Environment written by Christian Linsmeier and published by Trans Tech Publications Ltd. This book was released on 2008-12-15 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). The development of materials designed for application in extreme environments is a very active field of research. In recent years, it has been realized by the materials science community that solutions to demanding applications in different fields can be identified by implementing common materials concepts. Research effort and technological development, driven by application requirements, are now a bridge between apparently separate communities. As first realized by the European Integrated Project “ExtreMat – New Materials for Extreme Applications”, common materials solutions are now being sought and found in the fields of thermal management materials, protective materials, radiation-resistant materials, bonding and interfaces, as well as advanced materials characterization and application-oriented testing.

Download or read book Ultra High Temperature Ceramics written by William G. Fahrenholtz and published by John Wiley & Sons. This book was released on 2014-10-10 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive book to focus on ultra-high temperature ceramic materials in more than 20 years Ultra-High Temperature Ceramics are a family of compounds that display an unusual combination of properties, including extremely high melting temperatures (>3000°C), high hardness, and good chemical stability and strength at high temperatures. Typical UHTC materials are the carbides, nitrides, and borides of transition metals, but the Group IV compounds (Ti, Zr, Hf) plus TaC are generally considered to be the main focus of research due to the superior melting temperatures and stable high-melting temperature oxide that forms in situ. Rather than focusing on the latest scientific results, Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications broadly and critically combines the historical aspects and the state-of-the-art on the processing, densification, properties, and performance of boride and carbide ceramics. In reviewing the historic studies and recent progress in the field, Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications provides: Original reviews of research conducted in the 1960s and 70s Content on electronic structure, synthesis, powder processing, densification, property measurement, and characterization of boride and carbide ceramics. Emphasis on materials for hypersonic aerospace applications such as wing leading edges and propulsion components for vehicles traveling faster than Mach 5 Information on materials used in the extreme environments associated with high speed cutting tools and nuclear power generation Contributions are based on presentations by leading research groups at the conference "Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications II" held May 13-19, 2012 in Hernstein, Austria. Bringing together disparate researchers from academia, government, and industry in a singular forum, the meeting cultivated didactic discussions and efforts between bench researchers, designers and engineers in assaying results in a broader context and moving the technology forward toward near- and long-term use. This book is useful for furnace manufacturers, aerospace manufacturers that may be pursuing hypersonic technology, researchers studying any aspect of boride and carbide ceramics, and practitioners of high-temperature structural ceramics.

Download or read book Advanced Ceramic Coatings and Materials for Extreme Environments II Volume 33 Issue 3 written by Dongming Zhu and published by John Wiley & Sons. This book was released on 2012-12-10 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring advanced ceramic coatings and ultra-high temperature ceramic materials, this issue brings readers up-to-date with important new and emerging findings, materials, and applications. The nineteen papers in this issue originate from two symposia and one focused session held in January 2012, during the 36th International Conference on Advanced Ceramics and Composites (ICACC). With contributions from leading ceramics and materials researchers from around the world, this issue explores the latest advances and key challenges in advanced thermal and environmental coating processing and characterizations, advanced wear corrosion-resistant, nanocomposite, and multi-functional coatings, thermal protection systems, and more.

Download or read book Advanced Materials and Structures for Extreme Operating Conditions written by Jacek J. Skrzypek and published by Springer Science & Business Media. This book was released on 2008-01-23 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the pages of this present monograph readers will find virtually everything they need to know about the latest advanced materials. The authors have covered almost every angle, including composites, functionally graded materials, and materials for high temperature service. They also examine advanced approaches to local and non-local analysis of localized damage, and provide a new description of crack deactivation. This highly informative volume also tackles the material properties for high temperature applications.

Download or read book Nanomaterials in Extreme Environments written by Rostislav Andrievski and published by Springer. This book was released on 2015-11-27 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the behaviour of nanomaterials under extreme conditions of high temperature, irradiation by electron/ions and neutrons as well as in mechanical and corrosion extremes. The theoretical approaches and modeling are presented with numerous results of experimental studies. Different processing methods of extreme-tolerant nanomaterials are described. Many application examples from high-temperature technique, nuclear reactors of new generations, aerospace industry, chemical and general engineering, sensor facility, power engineering, electronics, catalysis and medical preparations are also contained. Some unresolved problems are emphasized.

Download or read book Materials Under Extreme Conditions written by A. K. Tyagi and published by Elsevier. This book was released on 2017-01-13 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Under Extreme Conditions: Recent Trends and Future Prospects analyzes the chemical transformation and decomposition of materials exposed to extreme conditions, such as high temperature, high pressure, hostile chemical environments, high radiation fields, high vacuum, high magnetic and electric fields, wear and abrasion related to chemical bonding, special crystallographic features, and microstructures. The materials covered in this work encompass oxides, non-oxides, alloys and intermetallics, glasses, and carbon-based materials. The book is written for researchers in academia and industry, and technologists in chemical engineering, materials chemistry, chemistry, and condensed matter physics. Describes and analyzes the chemical transformation and decomposition of a wide range of materials exposed to extreme conditions Brings together information currently scattered across the Internet or incoherently dispersed amongst journals and proceedings Presents chapters on phenomena, materials synthesis, and processing, characterization and properties, and applications Written by established researchers in the field

Download or read book Handbook of Materials Structures Properties Processing and Performance written by Lawrence E. Murr and published by Springer. This book was released on 2021-01-14 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensive knowledge base provides a coherent description of advanced topics in materials science and engineering with an interdisciplinary/multidisciplinary approach. The book incorporates a historical account of critical developments and the evolution of materials fundamentals, providing an important perspective for materials innovations, including advances in processing, selection, characterization, and service life prediction. It includes the perspectives of materials chemistry, materials physics, engineering design, and biological materials as these relate to crystals, crystal defects, and natural and biological materials hierarchies, from the atomic and molecular to the macroscopic, and emphasizing natural and man-made composites. This expansive presentation of topics explores interrelationships among properties, processing, and synthesis (historic and contemporary). The book serves as both an authoritative reference and roadmap of advanced materials concepts for practitioners, graduate-level students, and faculty coming from a range of disciplines.

Download or read book Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development written by Mrityunjay Singh and published by John Wiley & Sons. This book was released on 2017-06-12 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global population growth and tremendous economic development has brought us to the crossroads of long-term sustainability and risk of irreversible changes in the ecosystem. Energy efficient and ecofriendly technologies and systems are critically needed for further growth and sustainable development. While ceramic matrix composites were originally developed to overcome problems associated with the brittle nature of monolithic ceramics, today the composites can be tailored for customized purposes and offer energy efficient and ecofriendly applications, including aerospace, ground transportation, and power generation systems. The 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC 9) was held in Toronto, Canada, June 26-30, 2016 to discuss challenges and opportunities in manufacturing, commercialization, and applications for these important material systems. The Global Forum on Advanced Materials and Technologies for Sustainable Development (GFMAT 2016) was held in conjunction with HTCMC 9 to address key issues, challenges, and opportunities in a variety of advanced materials and technologies that are critically needed for sustainable societal development. This Ceramic Transactions volume contains a collection of peer reviewed papers from the 16 below symposia that were submitted from these two conferences Design and Development of Advanced Ceramic Fibers, Interfaces, and Interphases in Composites- A Symposium in Honor of Professor Roger Naslain Innovative Design, Advanced Processing, and Manufacturing Technologies Materials for Extreme Environments: Ultrahigh Temperature Ceramics (UHTCs) and Nano-laminated Ternary Carbides and Nitrides (MAX Phases) Polymer Derived Ceramics and Composites Advanced Thermal and Environmental Barrier Coatings: Processing, Properties, and Applications Thermomechanical Behavior and Performance of Composites Ceramic Integration and Additive Manufacturing Technologies Component Testing and Evaluation of Composites CMC Applications in Transportation and Industrial Systems Powder Processing Innovation and Technologies for Advanced Materials and Sustainable Development Novel, Green, and Strategic Processing and Manufacturing Technologies Ceramics for Sustainable Infrastructure: Geopolymers and Sustainable Composites Advanced Materials, Technologies, and Devices for Electro-optical and Medical Applications Porous Ceramics for Advanced Applications Through Innovative Processing Multifunctional Coatings for Sustainable Energy and Environmental Applications

Download or read book Materials in Extreme Environments Volume 929 written by Daryush Ila and published by . This book was released on 2006-09-15 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates the fundamental properties and response of materials in extreme environments such as static and dynamic high pressure, high strain and high strain-rates, high radiation and electromagnetic fields, high and low temperatures, corrosive conditions, environments causing embrittlement, and environments containing atomic oxygen. This is an extremely active and vibrant field of research, in particular because it is now possible to create laboratory conditions similar in pressure, temperature and radiation to those found in planetary interiors and in space. In addition, advanced simulation methods, coupled with high-performance computing platforms, now afford predictions - on a first-principles basis - of the properties of materials in extreme environments. Scientists from a broad spectrum of fields are represented, including space science, planetary science, high-pressure research, shock physics, ultrafast science, and energetic materials research.

Download or read book Polymers and Additives in Extreme Environments written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2021-09-08 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: POLYMERS AND ADDITVES IN EXTREME ENVIRONMENTS Uniquely catalogs polymers and additives for uses in extreme applications such as in high or low pressure, high or low temperature, deep water and other special applications. The book includes chapters on aqueous environments including polymeric membranes for water purification and wastewater treatment; extreme pressure environments such as oils and lubricants for combustion engines as well as materials used for deep drilling such as surfactants, scale inhibitors, foaming agents, defoamers, propellants, fracturing fluids; extreme temperatures is subdivided in high and low temperature applications including gasketing materials, fuel tank sealants, expulsion bladders, fuel cell materials, and on the other hand, cold weather articles and thermoregulatory textiles; electrical applications include solar cell devices, triboelectric generators, fuel cell applications, electrochromic materials and batteries; medical applications include polymers for contact lenses, materials for tissue engineering, sophisticated drug delivery systems; aerospace applications include outer space applications such as low temperature and pressure, also cosmic rays, outgassing, and atomic erosion, as well as materials for electrostactic dissipative coatings and space suits; a final chapter detailing materials that are used in other extreme environments, such as adhesives, and polymeric concrete materials. Audience Materials and polymer scientists working in manufacturing and plastics, civil and mechanical engineers in various industries such as automotive, aircraft, space, marine and shipping, electronics, construction, electrical, etc. will find this book essential. The book will also serve the needs of engineers and specialists who have only a passing contact with polymers and additives in industrial setting need to know more.

Download or read book Advanced Ceramic Coatings and Materials for Extreme Environments Volume 32 Issue 3 written by Dongming Zhu and published by John Wiley & Sons. This book was released on 2011-11-11 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Advanced Ceramic Coatings for Structural, Environmental, and Functional Applications and Materials for Extreme Environments symposia on topics such as Coatings to Resist Wear, Erosion and Tribological Loadings; Environmental Barrier Coatings; Functionally Graded Coatings and Interfaces; Thermal Barrier Coatings; and Ultrahigh Temperature Ceramics and Nanolaminated Ternary Carbides and Nitrides (MAX Phases).

Download or read book Applied Nanoindentation in Advanced Materials written by Atul Tiwari and published by John Wiley & Sons. This book was released on 2017-10-30 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in the area of nanoindentation has gained significant momentum in recent years, but there are very few books currently available which can educate researchers on the application aspects of this technique in various areas of materials science. Applied Nanoindentation in Advanced Materials addresses this need and is a comprehensive, self-contained reference covering applied aspects of nanoindentation in advanced materials. With contributions from leading researchers in the field, this book is divided into three parts. Part one covers innovations and analysis, and parts two and three examine the application and evaluation of soft and ceramic-like materials respectively. Key features: A one stop solution for scholars and researchers to learn applied aspects of nanoindentation Contains contributions from leading researchers in the field Includes the analysis of key properties that can be studied using the nanoindentation technique Covers recent innovations Includes worked examples Applied Nanoindentation in Advanced Materials is an ideal reference for researchers and practitioners working in the areas of nanotechnology and nanomechanics, and is also a useful source of information for graduate students in mechanical and materials engineering, and chemistry. This book also contains a wealth of information for scientists and engineers interested in mathematical modelling and simulations related to nanoindentation testing and analysis.

Download or read book Risk in Extreme Environments written by VICKI M. BIER and published by Routledge. This book was released on 2024-06-24 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk in Extreme Environments presents a wide-ranging discussion of approaches for assessing and managing extreme risks. The book includes case studies on nuclear power, infectious diseases, and global catastrophic risks, in addition to sections on risk assessment, risk management, and risk perceptions, and brings together interdisciplin