Download or read book Advanced Materials and Structures for Extreme Operating Conditions written by Jacek J. Skrzypek and published by Springer Science & Business Media. This book was released on 2008-01-23 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the pages of this present monograph readers will find virtually everything they need to know about the latest advanced materials. The authors have covered almost every angle, including composites, functionally graded materials, and materials for high temperature service. They also examine advanced approaches to local and non-local analysis of localized damage, and provide a new description of crack deactivation. This highly informative volume also tackles the material properties for high temperature applications.
Download or read book Numerical Modeling of Materials Under Extreme Conditions written by Nicola Bonora and published by Springer. This book was released on 2014-05-09 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents twelve state of the art contributions in the field of numerical modeling of materials subjected to large strain, high strain rates, large pressure and high stress triaxialities, organized into two sections. The first part is focused on high strain rate-high pressures such as those occurring in impact dynamics and shock compression related phenomena, dealing with material response identification, advanced modeling incorporating microstructure and damage, stress waves propagation in solids and structures response under impact. The latter part is focused on large strain-low strain rates applications such as those occurring in technological material processing, dealing with microstructure and texture evolution, material response at elevated temperatures, structural behavior under large strain and multi axial state of stress.
Download or read book Advanced Theoretical and Computational Methods for Complex Materials and Structures written by Francesco Tornabene and published by MDPI. This book was released on 2021-08-30 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The broad use of composite materials and shell structural members with complex geometries in technologies related to various branches of engineering has gained increased attention from scientists and engineers for the development of even more refined approaches and investigation of their mechanical behavior. It is well known that composite materials are able to provide higher values of strength stiffness, and thermal properties, together with conferring reduced weight, which can affect the mechanical behavior of beams, plates, and shells, in terms of static response, vibrations, and buckling loads. At the same time, enhanced structures made of composite materials can feature internal length scales and non-local behaviors, with great sensitivity to different staking sequences, ply orientations, agglomeration of nanoparticles, volume fractions of constituents, and porosity levels, among others. In addition to fiber-reinforced composites and laminates, increased attention has been paid in literature to the study of innovative components such as functionally graded materials (FGMs), carbon nanotubes (CNTs), graphene nanoplatelets, and smart constituents. Some examples of smart applications involve large stroke smart actuators, piezoelectric sensors, shape memory alloys, magnetostrictive and electrostrictive materials, as well as auxetic components and angle-tow laminates. These constituents can be included in the lamination schemes of smart structures to control and monitor the vibrational behavior or the static deflection of several composites. The development of advanced theoretical and computational models for composite materials and structures is a subject of active research and this is explored here for different complex systems, including their static, dynamic, and buckling responses; fracture mechanics at different scales; the adhesion, cohesion, and delamination of materials and interfaces.
Download or read book Mechanics of Anisotropic Materials written by Jacek J. Skrzypek and published by Springer. This book was released on 2015-05-09 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is focused on constitutive description of mechanical behaviour of engineering materials: both conventional (polycrystalline homogeneous isotropic or anisotropic metallic materials) and non-conventional (heterogeneous multicomponent anisotropic composite materials). Effective material properties at the macro-level depend on both the material microstructure (originally isotropic or anisotropic) as well as dissipative phenomena occurred on fabrication and consecutive loading phase (hardening) resulting in irreversible microstructure changes (acquired anisotropy). The material symmetry is a background and anisotropy is a core around which the book is formed. In this way a revision of classical rules of enhanced constitutive description of materials is required.
Download or read book Materials Under Extreme Conditions written by A. K. Tyagi and published by Elsevier. This book was released on 2017-01-13 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Under Extreme Conditions: Recent Trends and Future Prospects analyzes the chemical transformation and decomposition of materials exposed to extreme conditions, such as high temperature, high pressure, hostile chemical environments, high radiation fields, high vacuum, high magnetic and electric fields, wear and abrasion related to chemical bonding, special crystallographic features, and microstructures. The materials covered in this work encompass oxides, non-oxides, alloys and intermetallics, glasses, and carbon-based materials. The book is written for researchers in academia and industry, and technologists in chemical engineering, materials chemistry, chemistry, and condensed matter physics. - Describes and analyzes the chemical transformation and decomposition of a wide range of materials exposed to extreme conditions - Brings together information currently scattered across the Internet or incoherently dispersed amongst journals and proceedings - Presents chapters on phenomena, materials synthesis, and processing, characterization and properties, and applications - Written by established researchers in the field
Download or read book 23rd Annual Conference on Composites Advanced Ceramics Materials and Structures B Volume 20 Issue 4 written by Ersan Ustundag and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book Lewis Structures Technology 1988 written by and published by . This book was released on 1988 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science Technology in China A Roadmap to 2050 written by and published by Springer Science & Business Media. This book was released on 2009-09-30 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: China’s modernization is viewed as a transformative revolution in the human history of modernization. As such, the Chinese Academy of Sciences (CAS) decided to give higher priority to the research on the science and technology (S&T) roadmap for priority areas in China’s modernization process. What is the purpose? And why is it? Is it a must? I think those are substantial and signifcant questions to start things forward. Significance of the Research on China’s S&T Roadmap to 2050 We are aware that the National Mid- and Long-term S&T Plan to 2020 has already been formed afer two years’ hard work by a panel of over 2000 experts and scholars brought together from all over China, chaired by Premier Wen Jiabao. Tis clearly shows that China has already had its S&T blueprint to 2020. Ten, why did CAS conduct this research on China’s S&T roadmap to 2050? In the summer of 2007 when CAS was working out its future strategic priorities for S&T development, it realized that some issues, such as energy, must be addressed with a long-term view. As a matter of fact, some strategic researches have been conducted, over the last 15 years, on energy, but mainly on how to best use of coal, how to best exploit both domestic and international oil and gas resources, and how to develop nuclear energy in a discreet way. Renewable energy was, of course, included but only as a supplementary energy.
Download or read book Contemporary Problems of Architecture and Construction written by Evgeny Rybnov and published by CRC Press. This book was released on 2021-03-09 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contemporary Problems of Architecture and Construction 2020 includes contributions on various complex issues and aspects of engineering and construction of buildings and structures, protection, reconstruction and restoration of architecture, as well as intellectualization of energy and safety systems functioning urban development. The contributions were presented at the eponymous conference (ICCPAC 2020, St Petersburg, Russia, November 25-26, 2020), and cover a wide range of topics: Urban development: problems of urban construction and architecture Engineering, construction and operation of buildings and structures Implementation of building information modeling (BIM) and geo-information systems (GIS) technologies in the construction industry Energy efficiency of buildings and maintenance systems Engineering technologies of sustainable nature management and environmental protection Intellectualization and algorithmization of large cities road safety systems functioning Economics and management in construction and public utility services. Contemporary Problems of Architecture and Construction 2020 will be of interest to academics and professionals involved in the urban development, engineering technologies, architecture and construction, economics and management in construction industry.
Download or read book Thin Walled Composite Beams written by Liviu Librescu and published by Springer Science & Business Media. This book was released on 2006-01-15 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This is the first monograph devoted to the foundation of the theory of composite anisotropic thin-walled beams and to its applications in various problems involving the aeronautical/aerospace, helicopter, naval and mechanical structures. Throughout the theoretical part, an effort was made to provide the treatment of the subject by using the equations of the 3-D elasticity theory. Non-classical effects such as transverse shear, warping constraint, anisotropy of constituent materials yielding the coupling of twist-bending (lateral), bending (transversal)-extension have been included and their implications have been thoroughly analyzed. Thermal effects have been included and in order to be able to circumvent their deleterious effects, functionally graded materials have been considered in their construction. Implications of the application of the tailoring technique and of the active feedback control on free vibration, dynamic response, instability and aeroelasticity of such structures have been amply investigated. Special care was exercised throughout this work to address and validate the adopted solution methodologies and the obtained results against those available in the literature and obtained via numerical or experimental means.
Download or read book Essentials of Offshore Structures written by D.V. Reddy and published by CRC Press. This book was released on 2016-04-19 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essentials of Offshore Structures: Framed and Gravity Platforms examines the engineering ideas and offshore drilling platforms for exploration and production. This book offers a clear and acceptable demonstration of both the theory and application of the relevant procedures of structural, fluid, and geotechnical mechanics to offshore structures. It
Download or read book Smart Materials and Structures written by G.R Tomlinson and published by CRC Press. This book was released on 1998-01-01 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant changes have occurred in materials science, including increasing demands on life extensions, and the reliability and exploitability of components, materials, and structures. These changes provide smart technologies with excellent application opportunities in aerospace, civil and electrical engineering, transportation, manufacturing, communications, defense, and medicine. Smart Materials and Structures presents an overview of current developments in the characterization and applications of materials and actuators, issues surrounding their control, and the integration of smart systems and technologies. This compendium provides a valuable synopsis of this rapidly expanding and topical research field for engineers, program managers, technologists, physicists, materials scientists, and mathematicians working to advance smart materials, research methods, their applications, and robotic technologies.
Download or read book Energy and Water Development Appropriations for 2017 Department of Energy Secretary of Energy written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2016 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The New Materials Society New materials markets and issues written by United States. Bureau of Mines and published by . This book was released on 1990 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Engineering Materials Structures and Systems Innovations Mechanics and Applications written by Alphose Zingoni and published by CRC Press. This book was released on 2019-08-21 with total page 2435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a wide variety of engineering materials (both traditional and innovative) and many types of structures. The many topics featured in these Proceedings can be classified into six broad categories that deal with: (i) the mechanics of materials and fluids (elasticity, plasticity, flow through porous media, fluid dynamics, fracture, fatigue, damage, delamination, corrosion, bond, creep, shrinkage, etc); (ii) the mechanics of structures and systems (structural dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) the numerical modelling and experimental testing of materials and structures (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) innovations and special structures (nanostructures, adaptive structures, smart structures, composite structures, bio-inspired structures, shell structures, membranes, space structures, lightweight structures, long-span structures, tall buildings, wind turbines, etc); (v) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber, glass); (vi) the process of structural engineering (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, testing, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). The SEMC 2019 Proceedings will be of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find them useful. Two versions of the papers are available. Short versions, intended to be concise but self-contained summaries of the full papers, are in this printed book. The full versions of the papers are in the e-book.
Download or read book Handbook of Research on Tribology in Coatings and Surface Treatment written by Pakseresht, Amirhossein and published by IGI Global. This book was released on 2022-03-25 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances are continuously being made in applying the coatings and surface treatments by different techniques to reduce the damages from tribology. Engineers need more detailed information to compare the capability of each coating process in wear resistant and lubrication applications. It is also important to focus on the concepts of tribology in various applications such as the manufacturing process, bio implants, machine elements, and corrosive environments. The need for a comprehensive resource addressing these findings in order to improve wear resistance is unavoidable. The Handbook of Research on Tribology in Coatings and Surface Treatment evaluates the latest advances the fabrication of wear-resistant and lubricant coatings by different techniques and investigates wear-resistant coatings and surface treatments in various applications such as the automobile industry. Covering a wide range of topics such as lubricant coatings and wearable electronic devices, it is ideal for engineers, industry professionals, researchers, academicians, scholars, practitioners, instructors, and students.
Download or read book Recent Advances in Mechanics written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2011-01-19 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 24 papers presented at the symposium on “Recent Advances in Mechanics” dedicated to the late Professor – Academician Pericles S. Theocaris in commemoration of the tenth anniversary of his death. The papers are written by world renowned and recognized experts in their fields and serve as a reference and guide for future research. The topics covered in the book can be divided into three major themes: Mathematical methods in applied mechanics (nine papers), experimental mechanics (nine papers) and fracture mechanics (six papers). Topics covered include: Application of reciprocity relations to laser-based ultrasonics, boundary value problems of the theory of elasticity, optimal design in contact mechanics, scaling of strength and lifetime distributions of quasibrittle structures, directional distortional hardening in plasticity, vibration of systems, instability phenomena in damped systems, variational methods for static and dynamic elasticity problems, an accelerated Newmark scheme for solving the equations of motion in the time domain, photoelastic tomography, electronic speckle pattern interferometry, composites exposed to fire, sampling moiré, microelecromechanical systems, experimental mechanics in nano-scale, advanced cement based nanocomposites, piezonuclear transmutations in brittle rocks under mechanical loading, stress triaxiality at crack tips studied by caustics, reinforcement of a cracked elastic plate with defects, some actual problems of fracture mechanics, cyclic plasticity with applications to extremely low cycle fatigue of structural steel, and fracture of a highly filled polymer composite.
