Download or read book Advanced Materials 93 written by Shigeyuki Somiya and published by Newnes. This book was released on 2012-12-02 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramics, Powders, Corrosion and Advanced Processing covers the proceedings of the Third International Union of Materials Research Societies (IUMRS) International Conference on Advanced Materials (ICAM), held in Sunshine City, Ikebukuro, Tokyo, Japan from August 31 to September 4, 1993. The said conference discusses the procedures for advanced materials. The book is divided into four parts. Part 1 includes topics such as preparation of powders from different compounds and substances and the application of different methods and techniques. Part 2 talks about high temperature oxidations and corrosions; degradation resistance of thermal barrier coatings; the environmental effects on corrosion behavior of stainless steel; effect of gas composition and pressure on high temperature corrosion; and other related concepts. Part 3 includes topics such as fatigue-crack behavior; the factors that lead to it; fracture resistance and how it is increased; and the application of ceramics to heat-resistant engines and turbines. Part 4 covers the advanced processing of ceramics, and Part 5 deals with the fabrication of silicon-based ceramics. The text is highly recommended for chemists and engineers in the field of ceramics who would like to know more about the advances in its studies and research.

Download or read book Advanced Materials 93 written by T Matsumoto and published by Newnes. This book was released on 2012-12-02 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computations, Glassy Materials, Microgravity and Non-Destructive Testing is a compilation of the papers presented during the Third IUMRS International Conference on Advanced Materials International Union of The Materials Research Societies that discussed the concepts and methods behind glassy materials. The book is divided into parts. Part 1 tackles the progresses in sol-gel science and technology; the reaction mechanisms of ormosils and effects of ultrasonic irradiation; and the preparation of different glasses and their properties. Part 2 covers topics such as the neural network system for the identification of materials; the use of computers for simulations of many-body systems; computer system for meeting the supercomputing needs of materials; quality control of materials information by knowledge base; and the development of knowledgebase system for computer-assisted alloy design. Part 3 deals with the properties of different materials, the concepts, and the techniques behind them, and Part 4 discusses the non-destructive evaluation. The text is recommended for chemists and engineers in the field of materials science, especially those who wish to know more about the progress in its field of research.

Download or read book Laser and Ion Beam Modification of Materials written by I. Yamada and published by Elsevier. This book was released on 2013-10-22 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser and Ion Beam Modification of Materials is a compilation of materials from the proceedings of the symposium U: Material Synthesis and Modification by Ion beams and Laser Beams. This collection discusses the founding of the KANSAI Science City in Japan, and the structures, equipment, and research projects of two institutions are discussed pertaining to eV-MeV ion beams. A description of ion beams as used in materials research and in manufacturing processes, along with trends in ion implantation technology in semiconductors, is discussed. Research into ion beams by China and its industrial uses in non-semiconductor area is noted. For industrial applications, developing technology in terms of high speed, large surface modifications and use of high doses is important. Thus, the development of different ion beam approaches is examined. Industrial applications of ion and laser processing are discussed as cluster beams are used in solid state physics and chemistry. Mention is made on a high power discharge pumped solid state physics (ArF) excimer laser as a potential light source for better material processing. Under ion beam material processing is nanofabrication using focused ion beams, important for research work in mesoscopic systems. Progress in the use of ion-beam mixing using kinetic energy of ion-beams to mingle with pre-deposited surface layers of substrate materials has shown promise. Advanced materials researchers and scientists, as well as academicians in the field of nuclear physics, will find this collection helpful.

Download or read book Bismuth Based High Temperature Superconductors written by Hiroshi Maeda and published by CRC Press. This book was released on 1996-07-09 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides coverage of the ongoing investigations on bismuth-based high-temperature cuprate superconductors, integrating scattered research activities and literature from 70 leading scientists throughout the world. The text covers crystal structures and microstructures, reversible or equilibrium magnetic and thermal properties, atomic site tunnel spe

Download or read book Handbook of Advanced Ceramics written by Shigeyuki Somiya and published by Elsevier Inc. Chapters. This book was released on 2013-04-11 with total page 1258 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 8th Pacific Rim International Conference on Advanced Materials and Processing PRICM 8 written by FernD.S. Marquis and published by Springer. This book was released on 2017-03-21 with total page 3539 pages. Available in PDF, EPUB and Kindle. Book excerpt: PRICM-8 features the most prominent and largest-scale interactions in advanced materials and processing in the Pacific Rim region. The conference is unique in its intrinsic nature and architecture which crosses many traditional discipline and cultural boundaries. This is a comprehensive collection of papers from the 15 symposia presented at this event.

Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1994-08 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on with total page 1136 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book List of Bureau of Mines Publications and Articles with Subject and Author Index written by United States. Bureau of Mines and published by . This book was released on 1995 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book New Publications written by United States. Bureau of Mines and published by . This book was released on 1994 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physical Metallurgy written by David E. Laughlin and published by Newnes. This book was released on 2014-07-24 with total page 2963 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fifth edition of the highly regarded family of titles that first published in 1965 is now a three-volume set and over 3,000 pages. All chapters have been revised and expanded, either by the fourth edition authors alone or jointly with new co-authors. Chapters have been added on the physical metallurgy of light alloys, the physical metallurgy of titanium alloys, atom probe field ion microscopy, computational metallurgy, and orientational imaging microscopy. The books incorporate the latest experimental research results and theoretical insights. Several thousand citations to the research and review literature are included. Exhaustively synthesizes the pertinent, contemporary developments within physical metallurgy so scientists have authoritative information at their fingertips Replaces existing articles and monographs with a single, complete solution Enables metallurgists to predict changes and create novel alloys and processes

Download or read book FAA NASA International Symposium on Advanced Structural Integrity Methods for Airframe Durability and Damage Tolerance written by Charles E. Harris and published by . This book was released on 1994 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Superconductivity IX written by Sadao Nakajima and published by Springer. This book was released on 1997-09 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: C axis Current I ~ . The (11 0) thick homoepitaxial film of 320 nm -------~ ~-=-=--==---==--==--==--- shows a very good surface flatness, which --------·· sJ;1 0] suggests the unique (110) atomic plane helps 2- A [1 1 OJ dimensional epitaxial growth of YBCO films, and shows excellent high Tc. The resultant 1. 0 surface morphology of YBCO is quite different Q ,. -- R(270)=1. 60 m 0 from the (110) heteroepitaxial films of similar 0 0. 0 " thickness [11). In the case of heteroepitaxy ~ . ,,_. 1. 0 irrespective of c-axis [ 12] or a-axis oriented ~ ~. . ,. R(270)=3. 71 m 0 films [5), only thin films show flat surfaces, g 0. 0 . . Tc=92. 3K "' which, however, give usually a degraded Tc due -~ 1. 0 v v I - to lattice mismatching. In conclusion, we have ::1. ,. . . . . R(270)=31. 9 mO succeeded to grow high-quality (11 0) YBCO ~ YBCO film . . Tc=90. 7 K 0. 0 ·;:: YBCO(IIO) 1 0 ·d·--~ YBCO thinfilms on (11 0) YBCO single crystal § substrate ~Xtt=u 1. 0 substra substrates with very flat surfaces and high Tc's. :£ R(270)=40. 1 m 0 0. 0 LLLLL. J. . . . LL~. t-J' L-Tc=9LWO. L-! L-K LLLLL. . . . L. . I. . . . l. . . . L. L. L. J. . . . . L. L. l. . . J 50 100 150 200 250 300 0 ACKNOWLEDGMENTS Temperature (K) One of the authors (T. U. ) would like to thank Fig.

Download or read book FAA NASA International Symposium on Advanced Structural Integrity Methods for Airframe Durability and Damage Tolerance Part 2 written by and published by . This book was released on 1994 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metamaterial Electromagnetic Wave Absorbers written by Willie J. Padilla and published by Morgan & Claypool Publishers. This book was released on 2022-01-24 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetic metamaterials are a family of shaped periodic materials which achieve extraordinary scattering properties that are difficult or impossible to achieve with naturally occurring materials. This book focuses on one such feature of electromagnetic metamaterials—the theory, properties, and applications of the absorption of electromagnetic radiation. We have written this book for undergraduate and graduate students, researchers, and practitioners, covering the background and tools necessary to engage in the research and practice of metamaterial electromagnetic wave absorbers in various fundamental and applied settings. Given the growing impact of climate change, the call for innovations that can circumvent the use of conventional energy sources will be increasingly important. As we highlight in Chapter 6, the absorption of radiation with electromagnetic metamaterials has been used for energy harvesting and energy generation, and will help to reduce reliance on fossil fuels. Other applications ranging from biochemical sensing to imaging are also covered. We hope this book equips interested readers with the tools necessary to successfully engage in applied metamaterials research for clean, sustainable energy. This book consists of six chapters. Chapter 1 provides an introduction and a brief history of electromagnetic wave absorbers; Chapter 2 focuses on several theories of perfect absorbers; Chapter 3 discusses the scattering properties achievable with metamaterial absorbers; Chapter 4 provides significant detail on the fabricational processes; Chapter 5 discusses examples of dynamical absorbers; and Chapter 6 highlights applications of metamaterial absorbers.

Download or read book Microstructure and Properties of Materials written by James Chen-Min Li and published by World Scientific. This book was released on 1996 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of an advanced textbook on microstructure and properties of materials. (The first volume is on aluminum alloys, nickel-based superalloys, metal matrix composites, polymer matrix composites, ceramics matrix composites, inorganic glasses, superconducting materials and magnetic materials). It covers titanium alloys, titanium aluminides, iron aluminides, iron and steels, iron-based bulk amorphous alloys and nanocrystalline materials.There are many elementary materials science textbooks, but one can find very few advanced texts suitable for graduate school courses. The contributors to this volume are experts in the subject, and hence, together with the first volume, it is a good text for graduate microstructure courses. It is a rich source of design ideas and applications, and will provide a good understanding of how microstructure affects the properties of materials.Chapter 1, on titanium alloys, covers production, thermomechanical processing, microstructure, mechanical properties and applications. Chapter 2, on titanium aluminides, discusses phase stability, bulk and defect properties, deformation mechanisms of single phase materials and polysynthetically twinned crystals, and interfacial structures and energies between phases of different compositions. Chapter 3, on iron aluminides, reviews the physical and mechanical metallurgy of Fe3Al and FeAl, the two important structural intermetallics. Chapter 4, on iron and steels, presents methodology, microstructure at various levels, strength, ductility and strengthening, toughness and toughening, environmental cracking and design against fracture for many different kinds of steels. Chapter 5, on bulk amorphous alloys, covers the critical cooling rate and the effect of composition on glass formation and the accompanying mechanical and magnetic properties of the glasses. Chapter 6, on nanocrystalline materials, describes the preparation from vapor, liquid and solid states, microstructure including grain boundaries and their junctions, stability with respect to grain growth, particulate consolidation while maintaining the nanoscale microstructure, physical, chemical, mechanical, electric, magnetic and optical properties and applications in cutting tools, superplasticity, coatings, transformers, magnetic recordings, catalysis and hydrogen storage.

Download or read book Analytical and Topical Index to the Reports of the Chief of Engineers and Officers of the Corps of Engineers United States Army 1866 1900 written by United States. Army. Corps of Engineers and published by . This book was released on 1903 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: