Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2023-12-05 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.

Download or read book Advanced Manufacturing Technology in China A Roadmap to 2050 written by Tianran Wang and published by Springer Science & Business Media. This book was released on 2012-03-02 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the eighteen field-specific reports comprising the comprehensive scope of the strategic general report of the Chinese Academy of Sciences, this sub-report addresses long-range planning for developing science and technology in the field of advanced manufacturing technology. They each craft a roadmap for their sphere of development to 2050. In their entirety, the general and sub-group reports analyze the evolution and laws governing the development of science and technology, describe the decisive impact of science and technology on the modernization process, predict that the world is on the eve of an impending S&T revolution, and call for China to be fully prepared for this new round of S&T advancement. Based on the detailed study of the demands on S&T innovation in China’s modernization, the reports draw a framework for eight basic and strategic systems of socio-economic development with the support of science and technology, work out China’s S&T roadmaps for the relevant eight basic and strategic systems in line with China’s reality, further detail S&T initiatives of strategic importance to China’s modernization, and provide S&T decision-makers with comprehensive consultations for the development of S&T innovation consistent with China’s reality. Supported by illustrations and tables of data, the reports provide researchers, government officials and entrepreneurs with guidance concerning research directions, the planning process, and investment. Founded in 1949, the Chinese Academy of Sciences is the nation’s highest academic institution in natural sciences. Its major responsibilities are to conduct research in basic and technological sciences, to undertake nationwide integrated surveys on natural resources and ecological environment, to provide the country with scientific data and consultations for government’s decision-making, to undertake government-assigned projects with regard to key S&T problems in the process of socio-economic development, to initiate personnel training, and to promote China’s high-tech enterprises through its active engagement in these areas.

Download or read book Design for Advanced Manufacturing Technologies and Processes written by LaRoux K. Gillespie and published by McGraw Hill Professional. This book was released on 2017-05-12 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-edge coverage of the new processes, materials, and technologies that are revolutionizing the manufacturing industry Expertly edited by a past president of the Society of Manufacturing Engineers, this state-of-the-art resource picks up where the bestselling Design for Manufacturability Handbook left off. Within its pages, readers will find detailed, clearly written coverage of the materials, technologies, and processes that have been developed and adopted in the manufacturing industry over the past sixteen years. More than this, the book also includes hard-to-find technical guidance and application information that can be used on the job to actually apply these cutting-edge processes and technologies in a real-world setting. Essential for manufacturing engineers and designers, Design for Advanced Manufacturing is enhanced by a host of international contributors, making the book a true global resource. • Information on the latest technologies and processes such as 3-D printing, nanotechnology, laser cutting, prototyping, additive manufacturing, and CAD/CAM software tools • Coverage of new materials including nano, smart, and shape-memory alloys, in steels, glass, plastics, and composites

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2014-11-26 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered

Download or read book Introduction to Advanced Manufacturing written by Ramy Harik and published by SAE International. This book was released on 2019-07-24 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Advanced Manufacturing was written by two experienced and passionate engineers whose mission is to make the subject of advanced manufacturing easy to understand and a practical solution to everyday problems. Harik, Ph.D. and Wuest, Ph.D., professors who have taught the subject for decades, combined their expertise to develop both an applied manual and a theoretical reference that addresses many different needs. Introduction to Advanced Manufacturing covers the following topics in detail: • Composites Manufacturing • Smart Manufacturing • Additive Manufacturing • Computer Aided Manufacturing • Polymers Manufacturing • Assembly Processes • Manufacturing Quality Control and Productivity • Subtractive Manufacturing • Deformative Manufacturing Introduction to Advanced Manufacturing offers a new, refreshing way of studying how things are made in the digital age. With academics and industry professionals in mind, Introduction to Advanced Manufacturing paves the ground for those interested in the new opportunities of Industry 4.0.

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.

Download or read book Green Materials and Advanced Manufacturing Technology written by Samson Jerold Samuel Chelladurai and published by CRC Press. This book was released on 2020-12-29 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes recent theoretical and practical advancements in green composite materials and advanced manufacturing technology. It provides important original and theoretical experimental results which use nonroutine technologies often unfamiliar to some readers and covers novel applications of more familiar experimental techniques and analyses of composite problems. Green Materials and Advanced Manufacturing Technology: Concepts and Applications provides insight and a better understanding into the development of green composite materials and advanced manufacturing technology used in various manufacturing sectors. It highlights recent trends in the fields of green composites, metal matrix composites, ceramic matrix composites, surface modification using laser cladding, types of dust collectors in waste management and recycling in industries, machinability studies of metals and composites using surface grinding, drilling, electrical discharge machining, joining of metals using friction stir welding, shielded metal arc welding, and linear friction welding. This book is written for engineering students, postgraduate students, research scholars, faculty members, and industry professionals who are engaged in green composite materials and development of advanced manufacturing technology.

Download or read book Economics of Advanced Manufacturing Systems written by Hamid R. Parsaei and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1980s have witnessed a tremendous growth in the field of computer integrated manufacturing systems. The other major areas of development have been computer-aided design, computer-aided manufacturing, industrial robotics, automated assembly, cellular and modular material handling, computer networking and office automation to name just a few. These new technologies are generally capital intensive and do not conform to traditional cost structures. The net result is a tremendous change in the way costs should be estimated and economic analyses performed. The majority of existing engineering economy texts still profess application of traditional analysis methods. But, as was men tioned above, it is clear that the basic trend in manufacturing industries is itself changing. So it is quite obvious that the practice of traditional economic analysis methods should change too. This book is an attempt to address the various issues associated with non-traditional methods for evaluation of advanced computer-integrated technologies. This volume consists of twenty refereed articles which are grouped into five parts. Part one, Economic Justification Methods, consists of six articles. In the first paper, Soni et at. present a new classification for economic justification methods for advanced automated manufacturing systems. In the second, Henghold and LeClair look at strengths and weaknesses of expert systems in general and more specifically, an ap plication aimed at investment justification in advanced technology. The third paper, by Carrasco and Lee, proposes an enhanced economic methodology to improve the needs analysis, conceptual design and de tailed design activities associated with technology modernization.

Download or read book Advanced Manufacturing Technology written by David L. Goetsch and published by Singular. This book was released on 1990 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Manufacturing Technology and Systems written by Jing Wu and published by Trans Tech Publications Ltd. This book was released on 2012-03-15 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). These are the proceedings of the International Conference on Advanced Manufacturing Technology and Systems (AMTS 2012), held on the 17th April 2012 in Wuhan, China. They cover the most recent developments in advanced manufacturing technology and systems.

Download or read book Organization and Management of Advanced Manufacturing written by Waldemar Karwowski and published by John Wiley & Sons. This book was released on 1994-03-31 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Takes into account the effective use of human factors issues in advanced manufacturing which would make the difference between the failure or success of industrial corporations. International authorities describe how to implement methods and techniques, applicable on a global basis, into manufacturing and process industries where change is being brought about as they move to concurrent engineering formats of operation.

Download or read book Advanced Manufacturing Technology written by and published by . This book was released on 1990 with total page 2 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Manufacturing and Processing Technology written by Chander Prakash and published by CRC Press. This book was released on 2020-10-25 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates recent research, theories, and practices relevant to the areas of surface engineering and the processing of materials for functional applications in the aerospace, automobile, and biomedical industries. The book focuses on the hidden technologies and advanced manufacturing methods that may not be standardized by research institutions but are greatly beneficial to material and manufacturing industrial engineers in many ways. It details projects, research activities, and innovations in a global platform to strengthen the knowledge of the concerned community. The book covers surface engineering including coating, deposition, cladding, nanotechnology, surface finishing, precision machining, processing, and emerging advanced manufacturing technologies to enhance the performance of materials in terms of corrosion, wear, and fatigue. The book captures the emerging areas of materials science and advanced manufacturing engineering and presents recent trends in research for researchers, field engineers, and academic professionals.

Download or read book Nature Inspired Optimization in Advanced Manufacturing Processes and Systems written by Ganesh M. Kakandikar and published by CRC Press. This book was released on 2020-12-08 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing system is going through substantial changes and developments in light of Industry 4.0. Newer manufacturing technologies are being developed and applied. There is a need to optimize these techniques when applied in different circumstances with respect to materials, tools, product configurations, and process parameters. This book covers computational intelligence applied to manufacturing. It discusses nature-inspired optimization of processes and their design and development in manufacturing systems. It explores all manufacturing processes, at both macro and micro levels, and offers manufacturing philosophies. Nonconventional manufacturing, real industry problems and case studies, research on generative processes, and relevance of all this to Industry 4.0 is also included. Researchers, students, academicians, and industry professionals will find this reference title very useful.

Download or read book Management of Advanced Manufacturing Technology written by Donald Gerwin and published by Wiley-Interscience. This book was released on 1992-01-21 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Management of Research and Development Organizations Managing the Unmanageable R. K. Jain and H. C. Triandis Written by the manager of a large research and development organization and a leading behavioral scientist, this book explores some of the essential topics in R&D management while providing hands-on guidance for putting specific techniques to work. 1990 (0 471-50791-1) 268 pp. Managing Technology in the Decentralized Firm Albert H. Rubenstein Technology has traditionally advanced faster than our ability to manage it. Here is a book designed to assist the professional in furthering the corporate technology program through its effective management. Based on studies of over 200 decentralized firms spanning a period of thirty years, Managing Technology in the Decentralized Firm addresses crucial aspects of the research and development and innovation processes, and suggests how to make them pay off. 1989 (0 471-61024-0) 476 pp. Statistical Quality Control for Manufacturing Managers William S. Messina In today’s competitive environment, the responsibility of the manufacturing manager has expanded to include ownership of the quality of the products coming off the line. The author uses real-life business situations to demonstrate how a manager can incorporate statistical quality control (SQC) into virtually any manufacturing line. He also offers practical advice on techniques managers can use to improve quality, increase productivity, and enhance the competitive position of the line. 1987 (0 471-85774-2) 331 pp. Management of Technological Change Yassin Sankar Technology produces changes within the organization that must be considered for effective implementation of innovations. This book focuses on the dynamics of technological change, especially the human aspects. The author examines the impact of technological change on job design, work flow, job stress, the elements of corporate culture, the organizational system, the information technology of the organization, the leadership style and strategic premises, the organizational design, and the value systems of managers and the organization. 1991 (0 471-63147-7) 374 pp.

Download or read book Modern Manufacturing Technology written by Jitendra Kumar Katiyar and published by CRC Press. This book was released on 2021-12-03 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Manufacturing Technology: Spotlight on Future summarizes the emergence and development of modern manufacturing techniques (MMTs) with a focus on metallic and advanced material-based additive manufacturing technologies and their potential applications. Further, it explores advanced machining techniques for production of novel nanomaterials. The book also covers modern sophisticated techniques for the fabrication of ultrafine electronic devices such as micro-electromechanical systems (MEMS), nano-electromechanical systems (NEMS), semiconductors, and optical systems. A dedicated chapter on manufacturing technology for Industry 4.0 is included. Features: Describes the background of manufacturing techniques in brief including the advent of and introduction to MMTs Reviews various types of MMTs established in recent years and their accelerated growth and development innovation-driven applications Overviews the physical and chemical techniques used for nanomaterials production Explores the fabrication mechanisms of MEMS, NEMS, semiconductors and optical devices Provides a conceptual overview of additive manufacturing technologies This book is geared to undergraduate and postgraduate students and professionals in mechanical and manufacturing engineering, and the manufacturing industry.

Download or read book Advanced Manufacturing Systems and Technology written by E. Kuljanic and published by Springer. This book was released on 2014-05-04 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, based on the Fourth International Conference on Advanced Manufacturing Systems and Technology - AMST '96 aims at presenting trend and up-to-date information on the latest developments - research results and industrial experience in the field of machining processes, optimization and process planning, forming, flexible machining systems, non conventional machining, robotics and control, measuring and quality, thus providing an international forum for a beneficial exchange of ideas, and furthering a favourable cooperation between research and industry.