Download or read book Advanced Hybrid Solar Cell Approaches for Future Generation Ultra high Efficiency Photovoltaic Devices written by Jongwon Lee and published by . This book was released on 2014 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing the conversion efficiencies of photovoltaic (PV) cells beyond the single junction theoretical limit is the driving force behind much of third generation solar cell research. Over the last half century, the experimental conversion efficiency of both single junction and tandem solar cells has plateaued as manufacturers and researchers have optimized various materials and structures. While existing materials and technologies have remarkably good conversion efficiencies, they are approaching their own limits. For example, tandem solar cells are currently well developed commercially but further improvements through increasing the number of junctions struggle with various issues related to material interfacial defects. Thus, there is a need for novel theoretical and experimental approaches leading to new third generation cell structures. Multiple exciton generation (MEG) and intermediate band (IB) solar cells have been proposed as third generation alternatives and theoretical modeling suggests they can surpass the detailed balance efficiency limits of single junction and tandem solar cells. MEG or IB solar cell has a variety of advantages enabling the use of low bandgap materials. Integrating MEG and IB with other cell types to make novel solar cells (such as MEG with tandem, IB with tandem or MEG with IB) potentially offers improvements by employing multi-physics effects in one device. This hybrid solar cell should improve the properties of conventional solar cells with a reduced number of junction, increased light-generated current and extended material selections. These multi-physics effects in hybrid solar cells can be achieved through the use of nanostructures taking advantage of the carrier confinement while using existing solar cell materials with excellent characteristics. This reduces the additional cost to develop novel materials and structures. In this dissertation, the author develops thermodynamic models for several novel types of solar cells and uses these models to optimize and compare their properties to those of existing PV cells. The results demonstrate multiple advantages from combining MEG and IB technology with existing solar cell structures.

Download or read book Next Generation Solar Cells written by Yoon-Bong Hahn and published by CRC Press. This book was released on 2023-08-10 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the principles and materials for the development of next-generation solar cells for a sustainable global society Discusses the structures, working principles, and limitations of solar cells as well as the improvement methods of their power-conversion efficiency Introduces generations of cells as photovoltaic devices, including third-generation solar cells such as organic solar cells, quantum dots solar cells, and organic–inorganic hybrid solar cells Focuses on the emerging perovskite solar cells (PSCs) and deals with their cell configuration, transport materials, and fabrication processes in detail.

Download or read book Next Generation of Photovoltaics written by Ana Cristobal and published by Springer Science & Business Media. This book was released on 2012-02-16 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new concepts for a next generation of PV. Among these concepts are: Multijunction solar cells, multiple excitation solar cells (or how to take benefit of high energy photons for the creation of more than one electron hole-pair), intermediate band solar cells (or how to take advantage of below band-gap energy photons) and related technologies (for quantum dots, nitrides, thin films), advanced light management approaches (plasmonics). Written by world-class experts in next generation photovoltaics this book is an essential reference guide accessible to both beginners and experts working with solar cell technology. The book deeply analyzes the current state-of-the-art of the new photovoltaic approaches and outlines the implementation paths of these advanced devices. Topics addressed range from the fundamentals to the description of state-of-the-art of the new types of solar cells.

Download or read book Next Generation Photovoltaics written by A. Martí and published by CRC Press. This book was released on 2003-09-01 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although photovoltaics are regarded by many as the most likely candidate for long term sustainable energy production, their implementation has been restricted by the high costs involved. Nevertheless, the theoretical limit on photovoltaic energy conversion efficiency-above 85%-suggests that there is room for substantial improvement of current commercially available solar cells, both silicon and thin-film based. Current research efforts are focused on implementing novel concepts to produce a new generation of low-cost, high-performance photovoltaics that make improved use of the solar spectrum. Featuring contributions from pioneers of next generation photovoltaic research, Next Generation Photovoltaics: High Efficiency through Full Spectrum Utilization presents a comprehensive account of the current state-of-the-art in all aspects of the field. The book first discusses topics, such as multi-junction solar cells (the method closest to commercialization), quantum dot solar cells, hot carrier solar cells, multiple quantum well solar cells, and thermophotovoltaics. The final two chapters of the book consider the materials, fabrication methods, and concentrator optics used for advanced photovoltaic cells. This book will be an essential reference for graduate students and researchers working with solar cell technology.

Download or read book Perovskite Photovoltaics written by Aparna Thankappan and published by Academic Press. This book was released on 2018-06-29 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Perovskite Photovoltaics: Basic to Advanced Concepts and Implementation examines the emergence of perovskite photovoltaics, associated challenges and opportunities, and how to achieve broader development. Consolidating developments in perovskite photovoltaics, including recent progress solar cells, this text also highlights advances and the research necessary for sustaining energy. Addressing different photovoltaics fields with tailored content for what makes perovskite solar cells suitable, and including commercialization examples of large-scale perovskite solar technology. The book also contains a detailed analysis of the implementation and economic viability of perovskite solar cells, highlighting what photovoltaic devices need to be generated by low cost, non-toxic, earth abundant materials using environmentally scalable processes. This book is a valuable resource engineers, scientists and researchers, and all those who wish to broaden their knowledge on flexible perovskite solar cells. Includes contributions by leading solar cell academics, industrialists, researchers and institutions across the globe Addresses different photovoltaics fields with tailored content for what makes perovskite solar cells different Provides commercialization examples of large-scale perovskite solar technology, giving users detailed analysis on the implementation, technical challenges and economic viability of perovskite solar cells

Download or read book Quantum Dot Solar Cells written by Jiang Wu and published by Springer Science & Business Media. This book was released on 2013-09-28 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third generation of solar cells includes those based on semiconductor quantum dots. This sophisticated technology applies nanotechnology and quantum mechanics theory to enhance the performance of ordinary solar cells. Although a practical application of quantum dot solar cells has yet to be achieved, a large number of theoretical calculations and experimental studies have confirmed the potential for meeting the requirement for ultra-high conversion efficiency. In this book, high-profile scientists have contributed tutorial chapters that outline the methods used in and the results of various quantum dot solar cell designs, including quantum dot intermediate band solar cells, hot electron quantum dot solar cells, quantum-dot sensitized solar cells, colloidal quantum dot solar cells, hybrid polymer-quantum dot solar cells, and MEG quantum dot solar cells. Both theoretical and experimental approaches are described. Quantum Dot Solar Cells helps to connect the fundamental laws of physics and the chemistry of materials with advances in device design and performance. The book can be recommended for a broad audience of chemists, electrical engineers, and materials scientists, and is suitable for use in courses on materials and device design for advanced and future optoelectronics.

Download or read book Organic Solar Cells written by Wallace C.H. Choy and published by Springer Science & Business Media. This book was released on 2012-11-19 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic solar cells have emerged as new promising photovoltaic devices due to their potential applications in large area, printable and flexible solar panels. Organic Solar Cells: Materials and Device Physics offers an updated review on the topics covering the synthesis, properties and applications of new materials for various critical roles in devices from electrodes, interface and carrier transport materials, to the active layer composed of donors and acceptors. Addressing the important device physics issues of carrier and exciton dynamics and interface stability and novel light trapping structures, the potential for hybrid organic solar cells to provide high efficiency solar cells is examined and discussed in detail. Specific chapters covers key areas including: Latest research and designs for highly effective polymer donors/acceptors and interface materials Synthesis and application of highly transparent and conductive graphene Exciton and charge dynamics for in-depth understanding of the mechanism underlying organic solar cells. New potentials and emerging functionalities of plasmonic effects in OSCs Interface Degradation Mechanisms in organic photovoltaics improving the entire device lifetime Device architecture and operation mechanism of organic/ inorganic hybrid solar cells for next generation of high performance photovoltaics This reference can be practically and theoretically applied by senior undergraduates, postgraduates, engineers, scientists, researchers, and project managers with some fundamental knowledge in organic and inorganic semiconductor materials or devices.

Download or read book Next Generation of Photovoltaics written by Ana Cristobal and published by Springer. This book was released on 2012-02-23 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new concepts for a next generation of PV. Among these concepts are: Multijunction solar cells, multiple excitation solar cells (or how to take benefit of high energy photons for the creation of more than one electron hole-pair), intermediate band solar cells (or how to take advantage of below band-gap energy photons) and related technologies (for quantum dots, nitrides, thin films), advanced light management approaches (plasmonics). Written by world-class experts in next generation photovoltaics this book is an essential reference guide accessible to both beginners and experts working with solar cell technology. The book deeply analyzes the current state-of-the-art of the new photovoltaic approaches and outlines the implementation paths of these advanced devices. Topics addressed range from the fundamentals to the description of state-of-the-art of the new types of solar cells.

Download or read book Silicon Heterojunction Solar Cells written by W.R. Fahrner and published by Trans Tech Publications Ltd. This book was released on 2006-08-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world of today must face up to two contradictory energy problems: on the one hand, there is the sharply growing consumer demand in countries such as China and India. On the other hand, natural resources are dwindling. Moreover, many of those countries which still possess substantial gas and oil supplies are politically unstable. As a result, renewable natural energy sources have received great attention. Among these, solar-cell technology is one of the most promising candidates. However, there still remains the problem of the manufacturing costs of such cells. Many attempts have been made to reduce the production costs of “conventional” solar cells (manufactured from monocrystalline silicon using diffusion methods) by instead using cheaper grades of silicon, and simpler pn-junction fabrication. That is the ‘hero’ of this book; the heterojunction solar cell.

Download or read book Third Generation Photovoltaics written by Martin A. Green and published by Springer Science & Business Media. This book was released on 2006-09-05 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaics, the direct conversion of sunlight to electricity, is now the fastest growing technology for electricity generation. Present "first generation" products use the same silicon wafers as in microelectronics. "Second generation" thin-films, now entering the market, have the potential to greatly improve the economics by eliminating material costs. Martin Green, one of the world’s foremost photovoltaic researchers, argues in this book that "second generation" photovoltaics will eventually reach its own material cost constraints, engendering a "third generation" of high performance thin-films. The book explores, self-consistently, the energy conversion potential of advanced approaches for improving photovoltaic performance and outlines possible implementation paths.

Download or read book Organic Solar Cells written by Wallace C.H. Choy and published by Springer. This book was released on 2012-11-17 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic solar cells have emerged as new promising photovoltaic devices due to their potential applications in large area, printable and flexible solar panels. Organic Solar Cells: Materials and Device Physics offers an updated review on the topics covering the synthesis, properties and applications of new materials for various critical roles in devices from electrodes, interface and carrier transport materials, to the active layer composed of donors and acceptors. Addressing the important device physics issues of carrier and exciton dynamics and interface stability and novel light trapping structures, the potential for hybrid organic solar cells to provide high efficiency solar cells is examined and discussed in detail. Specific chapters covers key areas including: Latest research and designs for highly effective polymer donors/acceptors and interface materials Synthesis and application of highly transparent and conductive graphene Exciton and charge dynamics for in-depth understanding of the mechanism underlying organic solar cells. New potentials and emerging functionalities of plasmonic effects in OSCs Interface Degradation Mechanisms in organic photovoltaics improving the entire device lifetime Device architecture and operation mechanism of organic/ inorganic hybrid solar cells for next generation of high performance photovoltaics This reference can be practically and theoretically applied by senior undergraduates, postgraduates, engineers, scientists, researchers, and project managers with some fundamental knowledge in organic and inorganic semiconductor materials or devices.

Download or read book High Efficient Low Cost Photovoltaics written by Vesselinka Petrova-Koch and published by Springer Nature. This book was released on 2019-11-27 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a bird’s-eye view of the recent development trends in photovoltaics – a big business field that is rapidly growing and well on its way to maturity. The book describes current efforts to develop highly efficient, low-cost photovoltaic devices based on crystalline silicon, III–V compounds, copper indium gallium selenide (CIGS) and perovskite photovoltaic cells along with innovative, cost-competitive glass/ flexible tubular glass concentrator modules and systems, highlighting recent attempts to develop highly efficient, low-cost, flexible photovoltaic cells based on CIGS and perovskite thin films. This second edition presents, for the first time, the possible applications of perovskite modules together with Augsburger Tubular photovoltaics.

Download or read book Photovoltaics Beyond Silicon written by Senthilarasu Sundaram and published by Elsevier. This book was released on 2024-06-28 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaics Beyond Silicon: Innovative Materials, Sustainable Processing Technologies, and Novel Device Structures presents the latest innovations in materials, processing and devices to produce electricity via advanced, sustainable photovoltaics technologies. The book provides an overview of the novel materials and device architectures that have been developed to optimize energy conversion efficiencies and minimize environmental impacts. Advances in technologies for harnessing solar energy are extensively discussed, with topics including materials processing, device fabrication, sustainability of materials and manufacturing, and the current state-of-the-art. Contributions from leading international experts discuss the applications, challenges and future prospects of research in this increasingly vital field, providing a valuable resource for students and researchers working in this area. Presents a comprehensive overview and detailed discussion of solar energy technology options for sustainable energy conversion Provides an understanding of the environmental challenges to be overcome and discusses the importance of efficient materials utilization for clean energy Looks at how to design materials processing and optimize device fabrication, including metrics such as power-to-weight ratio, effectiveness at EOL compared to BOL, life-cycle analysis

Download or read book Nanostructured Photovoltaic Devices for Next Generation Solar Cell written by Sung Jin Kim and published by . This book was released on 2008 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the search for alternative sources of energy other than petroleum continues to expand, solar energy conversion has already been identified as one of the most promising technologies. In the past few years there has been extensive research focused on the next generation solar cells that can exceed the Shockley-Queisser limit (a model that predicts the maximum achievable efficiency for a given material with a given bandgap). Moreover, nanoengineering approaches to enhance solar power conversion efficiency have started to receive considerable interest. Even in the most efficient commercially available solar devices utilizing crystalline silicon, a major portion of the absorbed ultraviolet photon energy is wasted as heat. Furthermore, this heat is detrimental to device reliability. Colloidal nanocrystal quantum dots (NQDs) offer the exciting prospect of simultaneously manipulating device and material structures and processes to enable more efficient solar energy conversion. Most importantly, these colloidal nanocrystal quantum dots are amenable to inexpensive fabrication techniques such as dip coating or spray coating of the constituent nanoscale materials onto various substrates. This dissertation focuses on the development of nanostructured photovoltaic devices, that exhibit multiple exciton generation, and that exploit the wide absorption spectra enabled by the quantum dots for next generation highly efficient, low cost, solar cells. Firstly, multiple exciton generation and subsequent electrical extraction from a thin film photoconductive device constructed from PbSe NQDs is demonstrated. As an extension of this work, this PbSe NQD photoconductor was used in a tandem structure with a polymer solar cell to demonstrate multiple carrier extraction the application of an external electric field. This structure exhibited improved device durability from UV irradiation due to the self-passivating effect provided by the PbSe layer. In order to achieve better exciton dissociation and charge transport, novel NQDs with functionalized ligands were developed. This research included the development of an approach to produce predefined patterns of quantum dots and multipod nanocrystals. The technique used optical lithography for direct writing of device structures for optoelectronic and electronic devices as well as the ability to change the ligand properties by using heat treatment. CdSe, CdTe, and PbSe nanocrystals were all functionalized by the incorporation of the functional ligand t -butoxycarbonyl (t -BOC). The ability to modify ligands of spin-casted nanocrystal layers by heating enables the fabrication of multi-layered structures. Moreover, the direct photopatterning of nanocrystal device structures was facilitated by the incorporation of a photo acid generator with the t -BOC functionalized nanocrystals. Finally, three different approaches that were recently developed to use t -BOC protected NQDs for photovoltaic devices will be discussed. The three types of devices that were developed include: (1) a multi-layered NQD all inorganic heterojunction photovoltaic devices; (2) a Schottky junction solar cell using a metal electrode on a NQD thin film; and (3) a hybrid (NQD/Polymer) bulk heterojunction device. Detailed characterization of these devices demonstrated that the t -BOC protected NQDs can be used to boost device performance (as compared to devices made from NQD with other ligands). This result provides significant advantages for realizing complicated device structures in the future.

Download or read book The Role of Exergy in Energy and the Environment written by Sandro Nižetić and published by Springer. This book was released on 2018-07-30 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the analysis and applications of energy, exergy, and environmental issues in all sectors of the economy, including industrial processes, transportation, buildings, and services. Energy sources and technologies considered are hydrocarbons, wind and solar energy, fuel cells, as well as thermal and electrical storage. This book provides theoretical insights, along with state-of-the-art case studies and examples and will appeal to the academic community, but also to energy and environmental professionals and decision makers.

Download or read book Functional Materials for Sustainable Energy Applications written by J A Kilner and published by Elsevier. This book was released on 2012-09-28 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global demand for low cost, efficient and sustainable energy production is ever increasing. Driven by recent discoveries and innovation in the science and technology of materials, applications based on functional materials are becoming increasingly important. Functional materials for sustainable energy applications provides an essential guide to the development and application of these materials in sustainable energy production. Part one reviews functional materials for solar power, including silicon-based, thin-film, and dye sensitized photovoltaic solar cells, thermophotovoltaic device modelling and photoelectrochemical cells. Part two focuses on functional materials for hydrogen production and storage. Functional materials for fuel cells are then explored in part three where developments in membranes, catalysts and membrane electrode assemblies for polymer electrolyte and direct methanol fuel cells are discussed, alongside electrolytes and ion conductors, novel cathodes, anodes, thin films and proton conductors for solid oxide fuel cells. Part four considers functional materials for demand reduction and energy storage, before the book concludes in part five with an investigation into computer simulation studies of functional materials. With its distinguished editors and international team of expert contributors, Functional materials for sustainable energy applications is an indispensable tool for anyone involved in the research, development, manufacture and application of materials for sustainable energy production, including materials engineers, scientists and academics in the rapidly developing, interdisciplinary field of sustainable energy. An essential guide to the development and application of functional materials in sustainable energy production Reviews functional materials for solar power Focuses on functional materials for hydrogen production and storage, fuel cells, demand reduction and energy storage

Download or read book Polymer Engineered Nanostructures for Advanced Energy Applications written by Zhiqun Lin and published by Springer. This book was released on 2017-06-16 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of engineering nanostructures mediated by functional polymers in combination with optimal synthesis and processing techniques. The focus is on polymer-engineered nanostructures for advanced energy applications. It discusses a variety of polymers that function as precursors, templates, nano-reactors, surfactants, stabilizers, modifiers, dopants, and spacers for directing self-assembly, assisting organization, and templating growth of numerous diverse nanostructures. It also presents a wide range of polymer processing techniques that enable the efficient design and optimal fabrication of nanostructured polymers, inorganics, and organic–inorganic nanocomposites using in-situ hybridization and/or ex-situ recombination methodologies. Combining state-of-the-art knowledge from polymer-guided fabrication of advanced nanostructures and their unique properties, it especially highlights the new, cutting-edge breakthroughs, future horizons, and insights into such nanostructured materials in applications such as photovoltaics, fuel cells, thermoelectrics, piezoelectrics, ferroelectrics, batteries, supercapacitors, photocatalysis, and hydrogen generation and storage. It offers an instructive and approachable guide to polymer-engineered nanostructures for further development of advanced energy materials to meet ever-increasing global energy demands. Interdisciplinary and broad perspectives from internationally respected contributors ensure this book serves as a valuable reference source for scientists, students, and engineers working in polymer science, renewable energy materials, materials engineering, chemistry, physics, surface/interface science, and nanotechnology. It is also suitable as a textbook for universities, institutes, and industrial institutions.