Download or read book Advanced Gear Engineering written by Veniamin Goldfarb and published by Springer. This book was released on 2017-07-10 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent developments in practically all spheres of mechanical engineering related to different kinds of gears and transmissions. Topics treated range from fundamental research to the advanced applications of gears in various practical fields, prospects of manufacturing development, results and trends of numerical and experimental research of gears, new approaches to gear design and aspects of their optimization synthesis.
Download or read book Advanced Gear Manufacturing and Finishing written by Kapil Gupta and published by Academic Press. This book was released on 2017-07-13 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Gear Manufacturing and Finishing offers detailed coverage of advanced manufacturing technologies used in the production of gears, including new methods such as spark erosion machining, abrasive water jet machining, additive layer manufacturing, laser shaping, and sustainable manufacturing of gears. The industry in this area is constantly producing new settings where gears must endure ever increasing stresses, strains, and temperatures. Advanced methods in manufacturing, finishing, and surface property enhancement have emerged in recent years to meet these challenges. This unique book takes a critical look at the state-of-the-art research into these new methods, and the latest improvements to classic technologies in both gear manufacturing and finishing. This book is essential reading for researchers and engineers working in the fields of powertrain manufacturing, gear technology, and advanced manufacturing technologies. Describes the machining systems, main components, and working procedures with the help of diagrams and photos. Demonstrates the mechanisms and capabilities of new methods. Shows improvements to a range of gear manufacturing and finishing technologies. Provides a critical review of recent research in a range of fields relevant to gear manufacturing technologies.
Download or read book Gleason Bevel Gear Technology written by Hermann J. Stadtfeld and published by . This book was released on 2014-05-01 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Approaches to Gear Design and Production written by Veniamin Goldfarb and published by Springer Nature. This book was released on 2020-01-25 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third book in a series devoted to gear design and production. Comprising papers by scientists and gear experts from around the globe, it covers recent developments in practically all spheres of mechanical engineering related to gears and transmissions. It describes advanced approaches to research, design, testing and production of various kinds of gears for a vast range of applications, with a particular focuses on advanced computer-aided approaches for gear analysis, simulation and design, the application of new materials and tribological issues.
Download or read book Gears and Gear Drives written by Damir T. Jelaska and published by John Wiley & Sons. This book was released on 2012-08-23 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding how gears are formed and how they interact or ‘mesh’ with each other is essential when designing equipment that uses gears or gear trains. The way in which gear teeth are formed and how they mesh is determined by their geometry and kinematics, which is the topic of this book. Gears and Gear Drives provides the reader with comprehensive coverage of gears and gear drives. Spur, helical, bevel, worm and planetary gears are all covered, with consideration given to their classification, geometry, kinematics, accuracy control, load capacity and manufacturing. Cylindrical gear geometry is the basis for dealing with any gear drives, so this is covered in detail. Key features: Contains hundreds of 2D and 3D figures to illustrate all types of gears and gear drives, including planetary and worm gears Includes fundamental derivations and explanations of formulae Enables the reader to know how to carry out accuracy control and load capacity checks for any gear drive Includes directions for the practical design of gears and gear drives Covers DIN and ISO standards in the area Gears and Gear Drives is a comprehensive reference for gears and gear drive professionals and graduate students in mechanical engineering departments and covers everything important to know how to design, control and manufacture gear drives.
Download or read book Advances in Gear Design and Manufacture written by Stephen P. Radzevich and published by CRC Press. This book was released on 2019-04-30 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Gear Design and Manufacture deals with gears, gear transmissions, and advanced methods of gear production.The book is focused on discussion of the latest discoveries and accomplishments in gear design and production, with chapters written by international experts in the field. Topics are aligned to meet the requirements of the modern scientific theory of gearing, providing readers precise knowledge and recommendations on how perfect gears and gear transmissions can be designed and produced, and how they work. It explains how gears and gear transmissions can be designed to reach high a “power-to-weight” ratio, and how to design and produce compact, high-capacity gearboxes.
Download or read book Gear Engineering written by Henry Edward Merritt and published by John Wiley & Sons. This book was released on 1972 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Practical Gear Design written by Stephen P. Radzevich and published by CRC Press. This book was released on 1994-10-21 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 30 years the book Practical Gear Design, later re-titled Handbook of Practical Gear Design, has been the leading engineering guide and reference on the subject. It is now available again in its most recent edition. The book is a detailed, practical guide and reference to gear technology. The design of all types of gears is covered, from those for small mechanisms to large industrial applications. The presentation is designed for easy reference for those involved in practical gear design, manufacture, applications and problem solving. The text is well illustrated with clear diagrams and photographs. The many tables provide needed reference data in convenient form.
Download or read book Theory and Practice of Gearing and Transmissions written by Veniamin Goldfarb and published by Springer. This book was released on 2015-08-26 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together papers from all spheres of mechanical engineering related to gears and transmissions, from fundamentals to advanced applications, from academic results in numerical and experimental research, to new approaches to gear design and aspects of their optimization synthesis and to the latest developments in manufacturing. Furthermore, this volume honours the work of Faydor L. Litvin on the 100th anniversary of this birth. He is acknowledged as the founder of the modern theory of gearing. An exhaustive list of his contributions and achievements and a biography are included.
Download or read book Gears written by Vincenzo Vullo and published by Springer Nature. This book was released on 2020-02-21 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the geometric and kinematic design of the various types of gears most commonly used in practical applications, also considering the problems concerning their cutting processes. The cylindrical spur and helical gears are first considered, determining their main geometric quantities in the light of interference and undercut problems, as well as the related kinematic parameters. Particular attention is paid to the profile shift of these types of gears either generated by rack-type cutter or by pinion-rack cutter. Among other things, profile-shifted toothing allows to obtain teeth shapes capable of greater strength and more balanced specific sliding, as well as to reduce the number of teeth below the minimum one to avoid the operating interference or undercut. These very important aspects of geometric-kinematic design of cylindrical spur and helical gears are then generalized and extended to the other examined types of gears most commonly used in practical applications, such as straight bevel gears; crossed helical gears; worm gears; spiral bevel and hypoid gears. Finally, ordinary gear trains, planetary gear trains and face gear drives are discussed. This is the most advanced reference guide to the state of the art in gear engineering. Topics are addressed from a theoretical standpoint, but in such a way as not to lose sight of the physical phenomena that characterize the various types of gears which are examined. The analytical and numerical solutions are formulated so as to be of interest not only to academics, but also to designers who deal with actual engineering problems concerning the gears
Download or read book Gears written by Vincenzo Vullo and published by Springer Nature. This book was released on 2020-01-24 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores the geometric and kinematic design of the various types of gears most commonly used in practical applications, also considering the problems concerning their cutting processes. The cylindrical spur and helical gears are first considered, determining their main geometric quantities in the light of interference and undercut problems, as well as the related kinematic parameters. Particular attention is paid to the profile shift of these types of gears either generated by rack-type cutter or by pinion-rack cutter. Among other things, profile-shifted toothing allows to obtain teeth shapes capable of greater strength and more balanced specific sliding, as well as to reduce the number of teeth below the minimum one to avoid the operating interference or undercut. These very important aspects of geometric-kinematic design of cylindrical spur and helical gears are then generalized and extended to the other examined types of gears most commonly used in practical applications, such as: straight bevel gears; crossed helical gears; worm gears; spiral bevel and hypoid gears. Finally, ordinary gear trains, planetary gear trains and face gear drives are discussed. Includes fully-developed exercises to draw the reader's attention to the problems that are of interest to the designer, as well as to clarify the calculation procedure Topics are addressed from a theoretical standpoint, but in such a way as not to lose sight of the physical phenomena that characterize the various types of gears which are examined The analytical and numerical solutions are formulated so as to be of interest not only to academics, but also to designers who deal with actual engineering problems concerning the gears
Download or read book Gears in Design Production and Education written by Natalya Barmina and published by Springer Nature. This book was released on 2021-05-31 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the fourth volume in the series devoted to gear engineering and computer-aided design, production, testing and education. It comprises fundamental and applied research contributions by scientists and gear experts from all the world and covers recent developments and historical achievements in various spheres of mechanical engineering related to different kinds of gears, transmissions, and drive systems. It gathers contributions describing the advanced approaches to research, design, testing and production of practically all common and new kinds of gears for a vast number of advanced applications. Special attention is paid to issues of higher education in the field of gears. The book is intended as a tribute to professor Veniamin Goldfarb (1941-2019), one of the world-known leaders in the field of gear research, education and production, who contributed much to the active international cooperation of gear experts and to promotion of MMS science. The introductory chapter of this book relates his research to major developments in the field of mechanisms and machine science and outlines important contributions that he made within the period of 1964-2019.
Download or read book Handbook of Gear Design written by Gitin M. Maitra and published by McGraw-Hill Professional Publishing. This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition provides extensive information to designers on various aspects of gears and gearing systems. Very comprehensive in its coverage, the handbook contains enough tables, illustrative examples and diagrams to enable designers arrive at quick solutions for their problems. The handbook is based on ISO specifications and is a unique blend of practical as well as the theoretical aspects of gear designs. The new edition includes more on spiral bevel gears, arcoid gears, klingelnberg, and gleason systems and gear tooth checking.
Download or read book Gear Handbook written by Darle W. Dudley and published by McGraw-Hill Companies. This book was released on 1962 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances on Mechanics Design Engineering and Manufacturing written by Benoit Eynard and published by Springer. This book was released on 2016-09-02 with total page 1245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.
Download or read book Advanced Machining and Finishing written by Kapil Gupta and published by Elsevier. This book was released on 2021-04-17 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining and Finishing explains the background theory, working principles, technical specifications, and latest developments in a wide range of advanced machining and finishing techniques. The book includes valuable technical information, tables of data, and diagrams to assist machinists. Drawing on the work of experts in both academia and industry, coverage addresses theoretical developments as well as practical improvements from R&D. With over 25 important processes, from electro-chemical machining to nano-machining and magnetic field assisted finishing, this is the most complete guide to this subject available. This unique guide will allow readers to compare the characteristics of different processes, understand how they work, and provide parameters for their effective implementation. This is part of a 4 volume set entitled Handbooks in Advanced Manufacturing, with the other 3 addressing Advanced Welding and Deforming, Additive Manufacturing and Surface Treatment, and Sustainable Manufacturing Processes. Provides the theory, operational parameters, and latest developments in over 25 different machining and finishing processes Addresses both traditional and non-traditional machining methods Introduces basic concepts in an introductory chapter, helping readers from a range of backgrounds to engage with the subject matter
Download or read book Vehicle and Engine Technology written by Heinz Heisler and published by Elsevier. This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents a unified description and explanation of the fundamentals of the essential components of the motor vehicle, making extensive use of illustrations alongside the written material. The second edition brings into focus advancements in technology which include mechanical refinements, electrical applications and electronically controlled systems. Annotation copyrighted by Book News, Inc., Portland, OR
