Download or read book Advanced Environmental and Chemical Sensing Technology written by Tuan Vo-Dinh and published by SPIE-International Society for Optical Engineering. This book was released on 2001 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Environmental Chemical and Biological Sensing Technologies written by and published by . This book was released on 2006 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Environmental Analysis written by Chaudhery Mustansar Hussain and published by Royal Society of Chemistry. This book was released on 2016-11-08 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental analysis techniques have advanced due to the use of nanotechnologies in improving the detection sensitivity and miniaturization of the devices in analytical procedures. These allow for developments such as increases in analyte concentration, the removal of interfering species and improvements in the detection limits. Bridging a gap in the literature, this book uniquely brings together state-of-the-art research in the applications of novel nanomaterials to each of the classical components of environmental analysis, namely sample preparation and extraction, separation and identification by spectroscopic techniques. Special attention is paid to those approaches that are considered greener and reduce the cost of the analysis process both in terms of chemicals and time consumption. Advanced undergraduates, graduates and researchers at the forefront of environmental science and engineering will find this book a good source of information. It will also help regulators, decision makers, surveillance agencies and the organizations assessing the impact of pollutants on the environment.

Download or read book Expanding the Vision of Sensor Materials written by Committee on New Sensor Technologies: Materials and Applications and published by National Academies Press. This book was released on 1995-07-06 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in materials science and engineering have paved the way for the development of new and more capable sensors. Drawing upon case studies from manufacturing and structural monitoring and involving chemical and long wave-length infrared sensors, this book suggests an approach that frames the relevant technical issues in such a way as to expedite the consideration of new and novel sensor materials. It enables a multidisciplinary approach for identifying opportunities and making realistic assessments of technical risk and could be used to guide relevant research and development in sensor technologies.

Download or read book Smart Sensors for Environmental and Medical Applications written by Hamida Hallil and published by John Wiley & Sons. This book was released on 2020-05-12 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an introduction to the topic of smart chemical sensors, along with an overview of the state of the art based on potential applications This book presents a comprehensive overview of chemical sensors, ranging from the choice of material to sensor validation, modeling, simulation, and manufacturing. It discusses the process of data collection by intelligent techniques such as deep learning, multivariate analysis, and others. It also incorporates different types of smart chemical sensors and discusses each under a common set of sub-sections so that readers can fully understand the advantages and disadvantages of the relevant transducers—depending on the design, transduction mode, and final applications. Smart Sensors for Environmental and Medical Applications covers all major aspects of the field of smart chemical sensors, including working principle and related theory, sensor materials, classification of respective transducer type, relevant fabrication processes, methods for data analysis, and suitable applications. Chapters address field effect transistors technologies for biological and chemical sensors, mammalian cell–based electrochemical sensors for label-free monitoring of analytes, electronic tongues, chemical sensors based on metal oxides, metal oxide (MOX) gas sensor electronic interfaces, and more. Addressing the limitations and challenges in obtaining state-of-the-art smart biochemical sensors, this book: Balances the fundamentals of sensor design, fabrication, characterization, and analysis with advanced methods Categorizes sensors into sub-types and describes their working, focusing on prominent applications Describes instrumentation and IoT networking methods of chemical transducers that can be used for inexpensive, accurate detection in commercialized smart chemical sensors Covers monitoring of food spoilage using polydiacetylene- and liposome-based sensors; smart and intelligent E-nose for sensitive and selective chemical sensing applications; odor sensing system; and microwave chemical sensors Smart Sensors for Environmental and Medical Applications is an important book for senior-level undergraduate and graduate students learning about this high-performance technology and its many applications. It will also inform practitioners and researchers involved in the creation and use of smart sensors.

Download or read book Advanced Environmental Monitoring written by Young Kim and published by Springer Science & Business Media. This book was released on 2007-10-31 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with recent developments and applications of environmental monitoring technologies, with emphasis on rapidly progressing optical and biological methods. Written by worldwide experts, this book will be of interest to environmental scientists in academia, research institutes, industry and the government.

Download or read book Nanostructured Materials written by T. Daniel Thangadurai and published by Springer Nature. This book was released on 2020-02-27 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the early stages of the development of nanostructures, including synthesis techniques, growth mechanisms, the physics and chemistry of nanostructured materials, various innovative characterization techniques, the need for functionalization and different functionalization methods as well as the various properties of nanostructured materials. It focuses on the applications of nanostructured materials, such as mechanical applications, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, as well as piezoelectric, agriculture, biomedical and, environmental remediation applications, and anti-microbial and antibacterial properties. Further, it includes a chapter on nanomaterial research developments, highlighting work on the life-cycle analysis of nanostructured materials and toxicity aspects.

Download or read book Chemical Gas and Biosensors for Internet of Things and Related Applications written by Kohji Mitsubayashi and published by Elsevier. This book was released on 2019-06-14 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical, Gas, and Biosensors for the Internet of Things and Related Applications brings together the fields of sensors and analytical chemistry, devices and machines, and network and information technology. This thorough resource enables researchers to effectively collaborate to advance this rapidly expanding, interdisciplinary area of study. As innovative developments in the Internet of Things (IoT) continue to open new possibilities for quality of life improvement, sensor technology must keep pace, Drs. Mitsubayashi, Niwa and Ueno have brought together the top minds in their respective fields to provide the latest information on the numerous uses of this technology. Topics covered include life-assist systems, network monitoring with portable environmental sensors, wireless livestock health monitoring, point-of-care health monitoring, organic electronics and bio-batteries, and more. - 2020 PROSE Awards - Winner: Category: Chemistry and Physics: Association of American Publishers - Describes the latest advances and underlying principles of sensors used in biomedicine, healthcare, biotechnology, nanotechnology and food and environment safety - Focuses on sensors' methods of data communication, logging and analysis for IoT applications - Explains the specific requirements of sensor design and performance improvement, helping researchers enhance sensitivity, selectivity, stability, reproducibility and response time

Download or read book Advanced Sensor Technology written by Ahmed Barhoum and published by Elsevier. This book was released on 2022-11-16 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Sensor Technology: Biomedical, Environmental, and Construction Applications introduces readers to the past, present and future of sensor technology and its emerging applications in a wide variety of different fields. Organized in five parts, the book covers historical context and future outlook of sensor technology development and emerging applications, the use of sensors throughout many applications in healthcare, health and life science research, public health and safety, discusses chemical sensors used in environmental monitoring and remediation of contaminants, highlights the use of sensors in food, agriculture, fire prevention, automotive and robotics, and more. Final sections look forward at the challenges that must be overcome in the development and use of sensing technology as well as their commercial use, making this book appropriate for the interdisciplinary community of researchers and practitioners interested in the development of sensor technologies. - Covers a range of environmental applications such as protection and improvement of water, air, soil, plants, and agriculture and food production; biomedical applications including detection of viruses, genes, hormones, proteins, bacteria, and cancer, and applications in construction such as fire protection, automotive, robotics, food packing and micro-machining - Provides an outlook on opportunities and challenges for the fabrication and manufacturing of sensors in industry and their applicability for industrial uses - Demonstrates how cutting-edge developments in sensing technology translate into real-world innovations in a range of industry sectors

Download or read book Underground Sensing written by Sibel Pamukcu and published by Academic Press. This book was released on 2017-10-22 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground Sensing: Monitoring and Hazard Detection for Environment and Infrastructure brings the target audience the technical and practical knowledge of existing technologies of subsurface sensing and monitoring based on a classification of their functionality. In addition, the book introduces emerging technologies and applications of sensing for environmental and geo-hazards in subsurface – focusing on sensing platforms that can enable fully distributed global measurements. Finally, users will find a comprehensive exploration of the future of underground sensing that can meet demands for preemptive and sustainable response to underground hazards. New concepts and paradigms based on passively powered and/or on-demand activated, embeddable sensor platforms are presented to bridge the gap between real-time monitoring and global measurements. - Presents a one-stop-shop reference for underground sensing and monitoring needs that saves valuable research time - Provides application cases for all technologies that are covered and described in detail - Includes full, four color images of equipment and applications - Designed to cover a wide variety of underground sensors, from agriculture to geohazards

Download or read book Advanced Environmental Analysis written by Chaudhery Mustansar Hussain and published by Royal Society of Chemistry. This book was released on 2016-11-09 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental analysis techniques have advanced due to the use of nanotechnologies in improving the detection sensitivity and miniaturization of the devices in analytical procedures. These allow for developments such as increases in analyte concentration, the removal of interfering species and improvements in the detection limits. Bridging a gap in the literature, this book uniquely brings together state-of-the-art research in the applications of novel nanomaterials to each of the classical components of environmental analysis, namely sample preparation and extraction, separation and identification by spectroscopic techniques. Special attention is paid to those approaches that are considered greener and reduce the cost of the analysis process both in terms of chemicals and time consumption. Advanced undergraduates, graduates and researchers at the forefront of environmental science and engineering will find this book a good source of information. It will also help regulators, decision makers, surveillance agencies and the organizations assessing the impact of pollutants on the environment.

Download or read book Handbook of Near Infrared Analysis written by Emil W. Ciurczak and published by CRC Press. This book was released on 2021-05-20 with total page 1308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid, inexpensive, and easy-to-deploy, near-infrared (NIR) spectroscopy can be used to analyze samples of virtually any composition, origin, and condition. The Handbook of Near Infrared Analysis, Fourth Edition, explores the factors necessary to perform accurate and time- and cost-effective analyses across a growing spectrum of disciplines. This updated and expanded edition incorporates the latest advances in instrumentation, computerization, chemometrics applied to NIR spectroscopy, and method development in NIR spectroscopy, and underscores current trends in sample preparation, calibration transfer, process control, data analysis, instrument performance testing, and commercial NIR instrumentation. This work offers readers an unparalleled combination of theoretical foundations, cutting-edge applications, and practical experience. Additional features include the following: Explains how to perform accurate as well as time- and cost-effective analyses. Reviews software-enabled chemometric methods and other trends in data analysis. Highlights novel applications in pharmaceuticals, polymers, plastics, petrochemicals, textiles, foods and beverages, baked products, agricultural products, biomedicine, nutraceuticals, and counterfeit detection. Underscores current trends in sample preparation, calibration transfer, process control, data analysis, and multiple aspects of commercial NIR instrumentation. Offering the most complete single-source guide of its kind, the Handbook of Near Infrared Analysis, Fourth Edition, continues to offer practicing chemists and spectroscopists an unparalleled combination of theoretical foundations, cutting-edge applications, and detailed practical experience provided firsthand by more than 50 experts in the field.

Download or read book Lab on a chip Devices for Advanced Biomedicines written by Arpana Parihar and published by Royal Society of Chemistry. This book was released on 2024-08-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global miniature devices market is poised to surpass a valuation of $12–$15 billion USD by the year 2030. Lab-on-a-chip (LOC) devices are a vital component of this market. Comprising a network of microchannels, electrical circuits, sensors, and electrodes, LOC is a miniaturized integrated device platform used to streamline day-to-day laboratory functions, run cost-effective clinical analyses and curb the need for centralized instrumentation facilities in remote areas. Compact design, portability, ease of operation, low sample volume, short reaction time, and parallel investigation stand as the pivotal factors driving the widespread acceptance of LOC within the biomedical community. In this book, the Editors meticulously explore LOC through three key ‘Ts’: Theories (microfluidics, microarrays, instrumentation, software); Technologies (additive manufacturing, artificial intelligence, computational thinking, smart consumables, scale-up tactics, and biofouling); and Trends (biomedical analysis, point-of-care diagnostics, personalized healthcare, bioactive synthesis, disease diagnosis, and space applications) This comprehensive text not only provides readers with a thorough understanding of the current advancements in the LOC domain but also offers valuable insights to support the utilization of miniaturized devices for enhanced healthcare practices. Aimed at career researchers looking for instruction in the topic and newcomers to the area, the book is also useful for undergraduate and postgraduate students embarking on new studies or for those interested in reading about the LOC platform.

Download or read book Sensors for Environment Health and Security written by M.-I. Baraton and published by Springer Science & Business Media. This book was released on 2008-11-25 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NATO Advanced Study Institute on “Sensors for Environment, Health and Security: Advanced Materials and Technology” was held in Vichy (France) on September 16–27, 2007 where more than 65 participants, ranging from Ph. D. students to experienced senior scientists, met and exchanged ideas and know-how in a friendly atmosphere. The present book intends to cover the main topics of this NATO ASI through 32 chapters distributed over two parts (Part I: “Materials and Technologies” and Part II: “Applications to Environment, Health and Security”). The scientific programme of the NATO ASI consisted in 28 1-hour lectures given by 14 invited lecturers, 5 additional 1-hour lectures given by seminar speakers, 22 oral presentations by selected ASI participants and a poster session. The programme was divided into four sessions: (1) Advanced materials and technologies; (2) Sensors for environment; (3) Sensors for health; (4) Sensors for security. During the “Advanced Materials and Technologies” session (Part I of the present book), the lectures were dedicated to critical analyses of current methods for the synthesis of materials, nanomaterials (nanoparticles, nanowires, nanotubes, ...) and nanocomposites to be used for the fabrication of sensing devices, mainly semiconductor sensors. Among the synthesis methods, chemical (sol-gel, etc. ) and physical methods (laser deposition, DC magnetron sputtering, etc. ) were discussed. Several lectures addressed characterization techniques and it was concluded that the physical and chemical control of the materials/nanomaterials, including surface chemistry, remains a key issue for the reproducibility of the final device.

Download or read book Advanced Environmental Monitoring and Control Program Technology Development Requirements written by and published by . This book was released on 1996 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Fiber Sensing Technologies written by Lei Wei and published by Springer Nature. This book was released on 2020-06-30 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber sensing technologies have enabled both fundamental studies and a wide spectrum of applications in every aspect of life. This book highlights the recent advancement in fiber sensing technologies based on newly developed sensing mechanisms, advanced fiber structures, and functional materials. In particular, the integration of functional materials with different electrical, optical, thermal, or mechanical properties into a single fiber offers a wealth of new opportunities in sensing. The book covers the major developments in novel fiber materials, such as semiconductors, metals, polymers, soft glasses, and carbon materials, as well as the sensing applications based on both single fiber and multi-dimensional fiber arrays for temperature, light, strain, vibration, electric and magnetic fields, hazardous chemicals, gases, and physiological signals.

Download or read book High Throughput Screening for Food Safety Assessment written by Arun K. Bhunia and published by Elsevier. This book was released on 2014-09-06 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in array-based detectors and imaging technologies have provided high throughput systems that can operate within a substantially reduced timeframe and other techniques that can detect multiple contaminants at one time. These technologies are revolutionary in terms of food safety assessment in manufacturing, and will also have a significant impact on areas such as public health and food defence. This book summarizes the latest research and applications of sensor technologies for online and high throughput screening of food. The book first introduces high throughput screening strategies and technology platforms, and discusses key issues in sample collection and preparation. The subsequent chapters are then grouped into four sections: Part I reviews biorecognition techniques; Part II covers the use of optical biosensors and hyperspectral imaging in food safety assessment; Part III focuses on electrochemical and mass-based transducers; and finally Part IV deals with the application of these safety assessment technologies in specific food products, including meat and poultry, seafood, fruits and vegetables. - Summarises the latest research on sensor technologies for online and high-throughput screening of food - Covers high-throughput screening and the current and forecast state of rapid contaminant detection technologies - Looks at the use of optical and electrochemical biosensors and hyperspectral imaging in food safety assessment and the application of these technologies in specific food products