Download or read book Advanced Engineering and Technology II written by Liquan Xie and published by CRC Press. This book was released on 2015-03-19 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Engineering and Technology II collects recent essential ideas and advanced techniques to overcome the current engineering issues in civil engineering, environmental engineering, water science and hydraulic engineering, energy and chemical engineering, and other related fields. The 60 technical papers from the 2nd Annual Congress on Advance

Download or read book Advanced Engineering for Processes and Technologies II written by Azman Ismail and published by Springer Nature. This book was released on 2021-02-22 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book “Advanced Engineering for Processes and Technologies II” provides a good platform for participating researchers and academicians to share their latest innovation, technology and research findings in the areas of marine engineering technology and applications, sea management as well as engineering education. It offers an opportunity for academicians of the Universiti Kuala Lumpur, Malaysian Institute of Marine Engineering Technology (UniKL MIMET) to exchange ideas and establish a professional network. There are more than 30 papers covering a wide range of topics related to technologies and education including simulation, intellectual discussion, environmental awareness, enhancement of knowledge and skills. The aim of this book focuses more on the numerous technological methods used for the establishment of engineering innovation and productivity through their competitive research findings and the exposure of their relative merits and limitations. The papers shared in this issue will enable other researchers to generate interest and novel ideas that can lead to the discovery of new engineering knowledge.

Download or read book Advanced Engineering for Processes and Technologies II written by Azman Ismail and published by Springer. This book was released on 2022-02-24 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book “Advanced Engineering for Processes and Technologies II” provides a good platform for participating researchers and academicians to share their latest innovation, technology and research findings in the areas of marine engineering technology and applications, sea management as well as engineering education. It offers an opportunity for academicians of the Universiti Kuala Lumpur, Malaysian Institute of Marine Engineering Technology (UniKL MIMET) to exchange ideas and establish a professional network. There are more than 30 papers covering a wide range of topics related to technologies and education including simulation, intellectual discussion, environmental awareness, enhancement of knowledge and skills. The aim of this book focuses more on the numerous technological methods used for the establishment of engineering innovation and productivity through their competitive research findings and the exposure of their relative merits and limitations. The papers shared in this issue will enable other researchers to generate interest and novel ideas that can lead to the discovery of new engineering knowledge.

Download or read book Progress in Engineering Technology II written by Muhamad Husaini Abu Bakar and published by Springer Nature. This book was released on 2020-06-03 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the selected and peer-reviewed manuscripts that were presented in the Conferences on Multidisciplinary Engineering and Technology (COMET 2019), held at the University Kuala Lumpur Malaysian Spanish Institute (UniKL MSI), Kedah, Malaysia from September 18 to 19, 2019. The aim of COMET 2019 was to present current and on-going research being carried out in the field of mechanical, manufacturing, electrical and electronics and general studies for engineering and technology. Besides, this book also contains the manuscripts from the System Engineering and Energy Laboratory (SEELAB) research cluster, UniKL which is actively doing research mainly focused on artificial intelligence, metal air batteries, advanced battery materials and energy material modelling fields. This volume is the third edition of the progress in engineering technology, Advanced Structured Materials which provides in-depth ongoing research activities among academia of UniKL MSI. Lastly, it is hoped to foster cooperation among organisations and research in the covered fields.

Download or read book Progress in Engineering Technology III written by Muhamad Husaini Abu Bakar and published by Springer Nature. This book was released on 2021-05-10 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the selected, peer-reviewed manuscripts presented at the Conference on Multidisciplinary Engineering and Technology (COMET 2019), held at the University Kuala Lumpur Malaysian Spanish Institute (UniKL MSI), Kedah, Malaysia, from September 18 to 19, 2019. This event presented research being carried out in the field of mechanical, manufacturing, electrical and electronics for engineering and technology. This book also contains the manuscripts from the System Engineering and Energy Laboratory (SEELAB) research cluster, UniKL, which is actively doing research mainly focused on artificial intelligence, Internet of things, metal air batteries, advanced battery materials and energy material modelling fields. This book is the fourth edition of the progress in engineering technology, Advanced Structured Materials which provides in-depth ongoing research activities among academia of UniKL MSI.

Download or read book Progress in Engineering Technology IV written by Muhamad Husaini Abu Bakar and published by Springer Nature. This book was released on 2022-02-25 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a collection of peer-reviewed papers from the 2020 Conference on Multidisciplinary Engineering and Technology (COMET 2020) held online on December 15–16, 2020. It contains twenty-five papers covering energy harvester, thermodynamics, vibration, dynamic of mechanics, manufacturing process, computer-aided manufacturing (CAM), CFD analysis, electronics, and microcontroller.

Download or read book Engineering Technology Education in the United States written by National Academy of Engineering and published by National Academies Press. This book was released on 2017-01-27 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vitality of the innovation economy in the United States depends on the availability of a highly educated technical workforce. A key component of this workforce consists of engineers, engineering technicians, and engineering technologists. However, unlike the much better-known field of engineering, engineering technology (ET) is unfamiliar to most Americans and goes unmentioned in most policy discussions about the US technical workforce. Engineering Technology Education in the United States seeks to shed light on the status, role, and needs of ET education in the United States.

Download or read book Advanced Computer and Communication Engineering Technology written by Hamzah Asyrani Sulaiman and published by Springer. This book was released on 2014-11-01 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers diverse aspects of advanced computer and communication engineering, focusing specifically on industrial and manufacturing theory and applications of electronics, communications, computing and information technology. Experts in research, industry, and academia present the latest developments in technology, describe applications involving cutting-edge communication and computer systems and explore likely future directions. In addition, access is offered to numerous new algorithms that assist in solving computer and communication engineering problems. The book is based on presentations delivered at ICOCOE 2014, the 1st International Conference on Communication and Computer Engineering. It will appeal to a wide range of professionals in the field, including telecommunication engineers, computer engineers and scientists, researchers, academics and students.

Download or read book Advanced Plumbing Technology 2 written by Alfred Steele and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Engineering Environments written by National Research Council and published by National Academies Press. This book was released on 1999-07-07 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in the capabilities of technologies applicable to distributed networking, telecommunications, multi-user computer applications, and interactive virtual reality are creating opportunities for users in the same or separate locations to engage in interdependent, cooperative activities using a common computer-based environment. These capabilities have given rise to relatively new interdisciplinary efforts to unite the interests of mission-oriented communities with those of the computer and social science communities to create integrated, tool-oriented computation and communication systems. These systems can enable teams in widespread locations to collaborate using the newest instruments and computing resources. The benefits are many. For example, a new paradigm for intimate collaboration between scientists and engineers is emerging. This collaboration has the potential to accelerate the development and dissemination of knowledge and optimize the use of instruments and facilities, while minimizing the time between the discovery and application of new technologies. Advanced Engineering Environments: Achieving the Vision, Phase 1 describes the benefits and feasibility of ongoing efforts to develop and apply advanced engineering environments (AEEs), which are defined as particular implementations of computational and communications systems that create integrated virtual and/or distributed environments linking researchers, technologists, designers, manufacturers, suppliers, and customers.

Download or read book Advanced Engineering Fluid Mechanics written by K. Muralidhar and published by Alpha Science Int'l Ltd.. This book was released on 2005 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid mechanics continues to dominate the world of engineering. This book bridges the gap between first and higher level text books on the subject. It shows that the approximate approaches are essentially globally averaged versions of the local treatment, that in turn is covered in considerable detail in the second edition.

Download or read book Advanced Materials Engineering and Technology II written by Mohd Mustafa Al Bakri Abdullah and published by Trans Tech Publications Ltd. This book was released on 2013-12-05 with total page 1194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 International Conference on Advanced Materials Engineering and Technology (ICAMET 2013), November 28-29, 2013, Bandung, Indonesia. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 205 papers are grouped as follows: Chapter 1: Advanced Characterization; Chapter 2: Biomaterials; Chapter 3: Biotechnology and Life Sciences; Chapter 4: Building Materials; Chapter 5: Coatings and Surface Engineering; Chapter 6: Composites and Polymer Materials; Chapter 7: Computational Materials Science; Chapter 8: New Functional Materials; Chapter 9: Optical and Photonic Materials; Chapter 10: Optoelectronics; Chapter 11: Semi-Conductor and Micro-Electronic Materials; Chapter 12: Testing and Evaluation of Materials

Download or read book Evaporation Technology in Food Processing written by Seid Mahdi Jafari and published by Elsevier. This book was released on 2024-02-29 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Evaporation Technology in Food Processing, Volume Nine in the Unit Operations and Processing Equipment in the Food Industry series, explains the processing operations and equipment necessary for recent invented non-thermal processing of different food products, including ozonation, plasma processing, pulsed electric fields, high pressure processing, irradiation and high frequency processing. These processes and unit operations are very important in terms of achieving favorable sensory properties and energy usage. Written by experts in the field of food engineering, this book targets Industrial Engineers working in the field of food processing and within food factories. Divided in four sections, “Evaporation basics," “Different types of evaporators, “Application of evaporators in the food industry and “Design, control and efficiency of evaporators, all chapters emphasize basic texts relating to experimental, theoretical, computational, and/or applications of food engineering principles and the relevant processing equipment to evaporation unit operations. Thoroughly explores the processing operations and equipment necessary for the evaporation of different food products applying steam Brings new opportunities in food processing through innovative evaporation processes Covers the design, control and efficiency of evaporators

Download or read book Advanced Engineering Economics written by Chan S. Park and published by John Wiley & Sons. This book was released on 2021-06-02 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Engineering Economics, Second Edition, provides an integrated framework for understanding and applying project evaluation and selection concepts that are critical to making informed individual, corporate, and public investment decisions. Grounded in the foundational principles of economic analysis, this well-regarded reference describes a comprehensive range of central topics, from basic concepts such as accounting income and cash flow, to more advanced techniques including deterministic capital budgeting, risk simulation, and decision tree analysis. Fully updated throughout, the second edition retains the structure of its previous iteration, covering basic economic concepts and techniques, deterministic and stochastic analysis, and special topics in engineering economics analysis. New and expanded chapters examine the use of transform techniques in cash flow modeling, procedures for replacement analysis, the evaluation of public investments, corporate taxation, utility theory, and more. Now available as interactive eBook, this classic volume is essential reading for both students and practitioners in fields including engineering, business and economics, operations research, and systems analysis.

Download or read book Advanced Engineering Technology III written by Jong Wan Hu and published by . This book was released on 2017-01-07 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the journal published by results of the 3rd International Conference on Advanced Engineering and Technology (ICAET 2016, Incheon, South Korea, December 16-18, 2016) and the topics of collection are related with results of researches and engineering solutions in the different branches of modern engineering sciences - from materials engineering to robotics, environmental and industrial engineering. We hope this collection will be useful for many scientists, engineers and students in future investigations in area of modern manufacture.

Download or read book Lost Technologies of Ancient Egypt written by Christopher Dunn and published by Simon and Schuster. This book was released on 2010-06-24 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique study of the engineering and tools used to create Egyptian monuments • Presents a stone-by-stone analysis of key Egyptian monuments, including the statues of Ramses II and the tunnels of the Serapeum • Reveals that highly refined tools and mega-machines were used in ancient Egypt From the pyramids in the north to the temples in the south, ancient artisans left their marks all over Egypt, unique marks that reveal craftsmanship we would be hard pressed to duplicate today. Drawing together the results of more than 30 years of research and nine field study journeys to Egypt, Christopher Dunn presents a stunning stone-by-stone analysis of key Egyptian monuments, including the statue of Ramses II at Luxor and the fallen crowns that lay at its feet. His modern-day engineering expertise provides a unique view into the sophisticated technology used to create these famous monuments in prehistoric times. Using modern digital photography, computer-aided design software, and metrology instruments, Dunn exposes the extreme precision of these monuments and the type of advanced manufacturing expertise necessary to produce them. His computer analysis of the statues of Ramses II reveals that the left and right sides of the faces are precise mirror images of each other, and his examination of the mysterious underground tunnels of the Serapeum illuminates the finest examples of precision engineering on the planet. Providing never-before-seen evidence in the form of more than 280 photographs, Dunn’s research shows that while absent from the archaeological record, highly refined tools, techniques, and even mega-machines must have been used in ancient Egypt.

Download or read book Advances in Processing Technology written by Gopal Kumar Sharma and published by CRC Press. This book was released on 2021-11-30 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book is an amalgamation of various topics which are quite relevant to academics pertaining to food science and technology. Sincere attempts have been made to map consumer's perception in terms of sensory evaluation of processed foods and their role on quality determination. To cover food safety, the topic of advancement in the traceability and transparency of food supply chain is discussed in length. Besides, providing basic nutrition food has become an essential source of health promoting phyto-ingredients too. To take care of the concerned population, therapeutic foods have also been discussed with their future trends. Similarly, recent trends in functional and Nutraceutical foods were also discussed in detail so as to give an exhaustive overlook of such subject matter. To give impetus to the growing and aged generations, the importance of the technology of weaning and geriatric foods is described in detail. Bio-preservation of various food products including fermentation had always attracted researchers for various reasons, inclusive of its novel and chemical free approach of preservation which has been aptly covered under current expansions in microbiology for food preservation and also under progression in biotechnology and its application in food processing. The cross linkage of advance technologies inclusive of nano-science is elaborated as technological advances in nano- science for specific food and nutrition delivery. Oil and spice commerce are two giants pillars in food processing industries and readers would surely be wishing to understand the developments in the technology of oils refineries and condiments. Smart and intelligent packing systems always extend an upper hand as far as shelf life monitoring of any processed food is concerned, especially when these are import worthy products. The science and technological approach of these packing innovations is also well covered. Note: T&F does not sell or distribute the hardback in India, Pakistan, Nepal, Bhutan, Bangladesh and Sri Lanka. This title is co-published with NIPA.