Download or read book Advanced Digital System Design using SoC FPGAs written by Ross K. Snider and published by Springer Nature. This book was released on 2023-01-10 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook teaches students techniques for the design of advanced digital systems using System-on-Chip (SoC) Field Programmable Gate Arrays (FPGAs). The author demonstrates design of custom hardware components for the FPGA fabric using VHDL, with implementation of custom hardware-software interfaces. Readers gain hands-on experience by writing programs and Linux device drivers in C to interact with custom hardware. This textbook enables laboratory experience in the design of custom digital systems using SoC FPGAs, emphasizing computational tasks such as digital signal processing, audio, or video processing.

Download or read book Modern Digital Designs with EDA VHDL and FPGA written by Lo Jien-Chung and published by . This book was released on 2015 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Digital System Design written by Shirshendu Roy and published by Springer Nature. This book was released on 2023-09-25 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is designed to serve as a textbook for courses offered to undergraduate and graduate students enrolled in electrical, electronics, and communication engineering. The objective of this book is to help the readers to understand the concepts of digital system design as well as to motivate the students to pursue research in this field. Verilog Hardware Description Language (HDL) is preferred in this book to realize digital architectures. Concepts of Verilog HDL are discussed in a separate chapter and many Verilog codes are given in this book for better understanding. Concepts of system Verilog to realize digital hardware are also discussed in a separate chapter. The book covers basic topics of digital logic design like binary number systems, combinational circuit design, sequential circuit design, and finite state machine (FSM) design. The book also covers some advanced topics on digital arithmetic like design of high-speed adders, multipliers, dividers, square root circuits, and CORDIC block. The readers can learn about FPGA and ASIC implementation steps and issues that arise at the time of implementation. One chapter of the book is dedicated to study the low-power design techniques and another to discuss the concepts of static time analysis (STA) of a digital system. Design and implementation of many digital systems are discussed in detail in a separate chapter. In the last chapter, basics of some advanced FPGA design techniques like partial re-configuration and system on chip (SoC) implementation are discussed. These designs can help the readers to design their architecture. This book can be very helpful to both undergraduate and postgraduate students and researchers.

Download or read book Digital System Designs and Practices written by Ming-Bo Lin and published by Wiley. This book was released on 2008-10-13 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: System-on-a-chip (SoC) has become an essential technique to lower product costs and maximize power efficiency, particularly as the mobility and size requirements of electronics continues to grow. It has therefore become increasingly important for electrical engineers to develop a strong understanding of the key stages of hardware description language (HDL) design flow based on cell-based libraries or field-programmable gate array (FPGA) devices. Honed and revised through years of classroom use, Lin focuses on developing, verifying, and synthesizing designs of practical digital systems using the most widely used hardware description Language: Verilog HDL. Explains how to perform synthesis and verification to achieve optimized synthesis results and compiler times Offers complete coverage of Verilog syntax Illustrates the entire design and verification flow using an FPGA case study Presents real-world design examples such as LED and LCD displays, GPIO, UART, timers, and CPUs Emphasizes design/implementation tradeoff options, with coverage of ASICs and FPGAs Provides an introduction to design for testability Gives readers deeper understanding by using problems and review questions in each chapter Comes with downloadable Verilog HDL source code for most examples in the text Includes presentation slides of all book figures for student reference Digital System Designs and Practices Using Verilog HDL and FPGAs is an ideal textbook for either fundamental or advanced digital design courses beyond the digital logic design level. Design engineers who want to become more proficient users of Verilog HDL as well as design FPGAs with greater speed and accuracy will find this book indispensable.

Download or read book Digital System Design with FPGA Implementation Using Verilog and VHDL written by Cem Unsalan and published by McGraw Hill Professional. This book was released on 2017-07-14 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master FPGA digital system design and implementation with Verilog and VHDL This practical guide explores the development and deployment of FPGA-based digital systems using the two most popular hardware description languages, Verilog and VHDL. Written by a pair of digital circuit design experts, the book offers a solid grounding in FPGA principles, practices, and applications and provides an overview of more complex topics. Important concepts are demonstrated through real-world examples, ready-to-run code, and inexpensive start-to-finish projects for both the Basys and Arty boards. Digital System Design with FPGA: Implementation Using Verilog and VHDL covers: • Field programmable gate array fundamentals • Basys and Arty FPGA boards • The Vivado design suite • Verilog and VHDL • Data types and operators • Combinational circuits and circuit blocks • Data storage elements and sequential circuits • Soft-core microcontroller and digital interfacing • Advanced FPGA applications • The future of FPGA

Download or read book Digital Logic and Microprocessor Design with VHDL written by Enoch O. Hwang and published by Cengage Learning. This book was released on 2006 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will teach students how to design digital logic circuits, specifically combinational and sequential circuits. Students will learn how to put these two types of circuits together to form dedicated and general-purpose microprocessors. This book is unique in that it combines the use of logic principles and the building of individual components to create data paths and control units, and finally the building of real dedicated custom microprocessors and general-purpose microprocessors. After understanding the material in the book, students will be able to design simple microprocessors and implement them in real hardware.

Download or read book FPGA based Implementation of Signal Processing Systems written by Roger Woods and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: An important working resource for engineers and researchers involved in the design, development, and implementation of signal processing systems The last decade has seen a rapid expansion of the use of field programmable gate arrays (FPGAs) for a wide range of applications beyond traditional digital signal processing (DSP) systems. Written by a team of experts working at the leading edge of FPGA research and development, this second edition of FPGA-based Implementation of Signal Processing Systems has been extensively updated and revised to reflect the latest iterations of FPGA theory, applications, and technology. Written from a system-level perspective, it features expert discussions of contemporary methods and tools used in the design, optimization and implementation of DSP systems using programmable FPGA hardware. And it provides a wealth of practical insights—along with illustrative case studies and timely real-world examples—of critical concern to engineers working in the design and development of DSP systems for radio, telecommunications, audio-visual, and security applications, as well as bioinformatics, Big Data applications, and more. Inside you will find up-to-date coverage of: FPGA solutions for Big Data Applications, especially as they apply to huge data sets The use of ARM processors in FPGAs and the transfer of FPGAs towards heterogeneous computing platforms The evolution of High Level Synthesis tools—including new sections on Xilinx's HLS Vivado tool flow and Altera's OpenCL approach Developments in Graphical Processing Units (GPUs), which are rapidly replacing more traditional DSP systems FPGA-based Implementation of Signal Processing Systems, 2nd Edition is an indispensable guide for engineers and researchers involved in the design and development of both traditional and cutting-edge data and signal processing systems. Senior-level electrical and computer engineering graduates studying signal processing or digital signal processing also will find this volume of great interest.

Download or read book Digital VLSI Systems Design written by Seetharaman Ramachandran and published by Springer Science & Business Media. This book was released on 2007-06-14 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides step-by-step guidance on how to design VLSI systems using Verilog. It shows the way to design systems that are device, vendor and technology independent. Coverage presents new material and theory as well as synthesis of recent work with complete Project Designs using industry standard CAD tools and FPGA boards. The reader is taken step by step through different designs, from implementing a single digital gate to a massive design consuming well over 100,000 gates. All the design codes developed in this book are Register Transfer Level (RTL) compliant and can be readily used or amended to suit new projects.

Download or read book Digital Systems Design with FPGAs and CPLDs written by Ian Grout and published by Elsevier. This book was released on 2011-04-08 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Systems Design with FPGAs and CPLDs explains how to design and develop digital electronic systems using programmable logic devices (PLDs). Totally practical in nature, the book features numerous (quantify when known) case study designs using a variety of Field Programmable Gate Array (FPGA) and Complex Programmable Logic Devices (CPLD), for a range of applications from control and instrumentation to semiconductor automatic test equipment.Key features include:* Case studies that provide a walk through of the design process, highlighting the trade-offs involved.* Discussion of real world issues such as choice of device, pin-out, power supply, power supply decoupling, signal integrity- for embedding FPGAs within a PCB based design.With this book engineers will be able to:* Use PLD technology to develop digital and mixed signal electronic systems* Develop PLD based designs using both schematic capture and VHDL synthesis techniques* Interface a PLD to digital and mixed-signal systems* Undertake complete design exercises from design concept through to the build and test of PLD based electronic hardwareThis book will be ideal for electronic and computer engineering students taking a practical or Lab based course on digital systems development using PLDs and for engineers in industry looking for concrete advice on developing a digital system using a FPGA or CPLD as its core. - Case studies that provide a walk through of the design process, highlighting the trade-offs involved. - Discussion of real world issues such as choice of device, pin-out, power supply, power supply decoupling, signal integrity- for embedding FPGAs within a PCB based design.

Download or read book Make FPGAs written by David Romano and published by Maker Media, Inc.. This book was released on 2016-02-29 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: What if you could use software to design hardware? Not just any hardware--imagine specifying the behavior of a complex parallel computer, sending it to a chip, and having it run on that chip--all without any manufacturing? With Field-Programmable Gate Arrays (FPGAs), you can design such a machine with your mouse and keyboard. When you deploy it to the FPGA, it immediately takes on the behavior that you defined. Want to create something that behaves like a display driver integrated circuit? How about a CPU with an instruction set you dreamed up? Or your very own Bitcoin miner You can do all this with FPGAs. Because you're not writing programs--rather, you're designing a chip whose sole purpose is to do what you tell it--it's faster than anything you can do in code. With Make: FPGAs, you'll learn how to break down problems into something that can be solved on an FPGA, design the logic that will run on your FPGA, and hook up electronic components to create finished projects.

Download or read book Digital Logic Design Using Verilog written by Vaibbhav Taraate and published by Springer. This book was released on 2016-05-17 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to serve as a hands-on professional reference with additional utility as a textbook for upper undergraduate and some graduate courses in digital logic design. This book is organized in such a way that that it can describe a number of RTL design scenarios, from simple to complex. The book constructs the logic design story from the fundamentals of logic design to advanced RTL design concepts. Keeping in view the importance of miniaturization today, the book gives practical information on the issues with ASIC RTL design and how to overcome these concerns. It clearly explains how to write an efficient RTL code and how to improve design performance. The book also describes advanced RTL design concepts such as low-power design, multiple clock-domain design, and SOC-based design. The practical orientation of the book makes it ideal for training programs for practicing design engineers and for short-term vocational programs. The contents of the book will also make it a useful read for students and hobbyists.

Download or read book A Practical Introduction to Hardware Software Codesign written by Patrick R. Schaumont and published by Springer Science & Business Media. This book was released on 2010-09-09 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a practical book for computer engineers who want to understand or implement hardware/software systems. It focuses on problems that require one to combine hardware design with software design – such problems can be solved with hardware/software codesign. When used properly, hardware/software co- sign works better than hardware design or software design alone: it can improve the overall performance of digital systems, and it can shorten their design time. Hardware/software codesign can help a designer to make trade-offs between the ?exibility and the performanceof a digital system. To achieve this, a designer needs to combine two radically different ways of design: the sequential way of dec- position in time, using software, with the parallel way of decomposition in space, using hardware. Intended Audience This book assumes that you have a basic understandingof hardware that you are - miliar with standard digital hardware componentssuch as registers, logic gates, and components such as multiplexers and arithmetic operators. The book also assumes that you know how to write a program in C. These topics are usually covered in an introductory course on computer engineering or in a combination of courses on digital design and software engineering.

Download or read book Advanced FPGA Design written by Steve Kilts and published by John Wiley & Sons. This book was released on 2007-06-18 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the advanced issues of FPGA design as the underlying theme of the work. In practice, an engineer typically needs to be mentored for several years before these principles are appropriately utilized. The topics that will be discussed in this book are essential to designing FPGA's beyond moderate complexity. The goal of the book is to present practical design techniques that are otherwise only available through mentorship and real-world experience.

Download or read book Embedded Microprocessor System Design using FPGAs written by Uwe Meyer-Baese and published by Springer Nature. This book was released on 2021-04-16 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook for courses in Embedded Systems introduces students to necessary concepts, through a hands-on approach. It gives a great introduction to FPGA-based microprocessor system design using state-of-the-art boards, tools, and microprocessors from Altera/Intel® and Xilinx®. HDL-based designs (soft-core), parameterized cores (Nios II and MicroBlaze), and ARM Cortex-A9 design are discussed, compared and explored using many hand-on designs projects. Custom IP for HDMI coder, Floating-point operations, and FFT bit-swap are developed, implemented, tested and speed-up is measured. Downloadable files include all design examples such as basic processor synthesizable code for Xilinx and Altera tools for PicoBlaze, MicroBlaze, Nios II and ARMv7 architectures in VHDL and Verilog code, as well as the custom IP projects. Each Chapter has a substantial number of short quiz questions, exercises, and challenging projects. Explains soft, parameterized, and hard core systems design tradeoffs; Demonstrates design of popular KCPSM6 8 Bit microprocessor step-by-step; Discusses the 32 Bit ARM Cortex-A9 and a basic processor is synthesized; Covers design flows for both FPGA Market leaders Nios II Altera/Intel and MicroBlaze Xilinx system; Describes Compiler-Compiler Tool development; Includes a substantial number of Homework’s and FPGA exercises and design projects in each chapter.

Download or read book The Design Warrior s Guide to FPGAs written by Clive Maxfield and published by Elsevier. This book was released on 2004-06-16 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field Programmable Gate Arrays (FPGAs) are devices that provide a fast, low-cost way for embedded system designers to customize products and deliver new versions with upgraded features, because they can handle very complicated functions, and be reconfigured an infinite number of times. In addition to introducing the various architectural features available in the latest generation of FPGAs, The Design Warrior's Guide to FPGAs also covers different design tools and flows.This book covers information ranging from schematic-driven entry, through traditional HDL/RTL-based simulation and logic synthesis, all the way up to the current state-of-the-art in pure C/C++ design capture and synthesis technology. Also discussed are specialist areas such as mixed hardward/software and DSP-based design flows, along with innovative new devices such as field programmable node arrays (FPNAs). Clive "Max" Maxfield is a bestselling author and engineer with a large following in the electronic design automation (EDA)and embedded systems industry. In this comprehensive book, he covers all the issues of interest to designers working with, or contemplating a move to, FPGAs in their product designs. While other books cover fragments of FPGA technology or applications this is the first to focus exclusively and comprehensively on FPGA use for embedded systems. - First book to focus exclusively and comprehensively on FPGA use in embedded designs - World-renowned best-selling author - Will help engineers get familiar and succeed with this new technology by providing much-needed advice on choosing the right FPGA for any design project

Download or read book Digital Design of Signal Processing Systems written by Shoab Ahmed Khan and published by John Wiley & Sons. This book was released on 2011-07-28 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Design of Signal Processing Systems discusses a spectrum of architectures and methods for effective implementation of algorithms in hardware (HW). Encompassing all facets of the subject this book includes conversion of algorithms from floating-point to fixed-point format, parallel architectures for basic computational blocks, Verilog Hardware Description Language (HDL), SystemVerilog and coding guidelines for synthesis. The book also covers system level design of Multi Processor System on Chip (MPSoC); a consideration of different design methodologies including Network on Chip (NoC) and Kahn Process Network (KPN) based connectivity among processing elements. A special emphasis is placed on implementing streaming applications like a digital communication system in HW. Several novel architectures for implementing commonly used algorithms in signal processing are also revealed. With a comprehensive coverage of topics the book provides an appropriate mix of examples to illustrate the design methodology. Key Features: A practical guide to designing efficient digital systems, covering the complete spectrum of digital design from a digital signal processing perspective Provides a full account of HW building blocks and their architectures, while also elaborating effective use of embedded computational resources such as multipliers, adders and memories in FPGAs Covers a system level architecture using NoC and KPN for streaming applications, giving examples of structuring MATLAB code and its easy mapping in HW for these applications Explains state machine based and Micro-Program architectures with comprehensive case studies for mapping complex applications The techniques and examples discussed in this book are used in the award winning products from the Center for Advanced Research in Engineering (CARE). Software Defined Radio, 10 Gigabit VoIP monitoring system and Digital Surveillance equipment has respectively won APICTA (Asia Pacific Information and Communication Alliance) awards in 2010 for their unique and effective designs.

Download or read book Advanced Chip Design written by Kishore Mishra and published by Createspace Independent Publishing Platform. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is intended for digital and system design engineers with emphasis on design and system architecture. The book is broadly divided into two sections - chapters 1 through 10, focusing on the digital design aspects and chapters 11 through 20, focusing on the system aspects of chip design. It comes with real-world examples in Verilog and introduction to SystemVerilog Assertions (SVA).