Download or read book Advanced Control Methods for Industrial Processes Modeling Design and Simulation of Complex Dynamic Systems in Real Time written by PA. LOPEZ PEREZ and published by VCH. This book was released on 2024-10-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling and Control of Dynamic Systems Using Gaussian Process Models written by Juš Kocijan and published by Springer. This book was released on 2015-11-21 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph opens up new horizons for engineers and researchers in academia and in industry dealing with or interested in new developments in the field of system identification and control. It emphasizes guidelines for working solutions and practical advice for their implementation rather than the theoretical background of Gaussian process (GP) models. The book demonstrates the potential of this recent development in probabilistic machine-learning methods and gives the reader an intuitive understanding of the topic. The current state of the art is treated along with possible future directions for research. Systems control design relies on mathematical models and these may be developed from measurement data. This process of system identification, when based on GP models, can play an integral part of control design in data-based control and its description as such is an essential aspect of the text. The background of GP regression is introduced first with system identification and incorporation of prior knowledge then leading into full-blown control. The book is illustrated by extensive use of examples, line drawings, and graphical presentation of computer-simulation results and plant measurements. The research results presented are applied in real-life case studies drawn from successful applications including: a gas–liquid separator control; urban-traffic signal modelling and reconstruction; and prediction of atmospheric ozone concentration. A MATLAB® toolbox, for identification and simulation of dynamic GP models is provided for download.
Download or read book Process Control written by B. Wayne Bequette and published by Prentice Hall Professional. This book was released on 2003 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master process control hands on, through practical examples and MATLAB(R) simulations This is the first complete introduction to process control that fully integrates software tools--enabling professionals and students to master critical techniques hands on, through computer simulations based on the popular MATLAB environment. Process Control: Modeling, Design, and Simulation teaches the field's most important techniques, behaviors, and control problems through practical examples, supplemented by extensive exercises--with detailed derivations, relevant software files, and additional techniques available on a companion Web site. Coverage includes: Fundamentals of process control and instrumentation, including objectives, variables, and block diagrams Methodologies for developing dynamic models of chemical processes Dynamic behavior of linear systems: state space models, transfer function-based models, and more Feedback control; proportional, integral, and derivative (PID) controllers; and closed-loop stability analysis Frequency response analysis techniques for evaluating the robustness of control systems Improving control loop performance: internal model control (IMC), automatic tuning, gain scheduling, and enhancements to improve disturbance rejection Split-range, selective, and override strategies for switching among inputs or outputs Control loop interactions and multivariable controllers An introduction to model predictive control (MPC) Bequette walks step by step through the development of control instrumentation diagrams for an entire chemical process, reviewing common control strategies for individual unit operations, then discussing strategies for integrated systems. The book also includes 16 learning modules demonstrating how to use MATLAB and SIMULINK to solve several key control problems, ranging from robustness analyses to biochemical reactors, biomedical problems to multivariable control.
Download or read book Developments in Advanced Control and Intelligent Automation for Complex Systems written by Min Wu and published by Springer Nature. This book was released on 2021-03-26 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the developments in the advanced control and intelligent automation for complex systems completed over the last two decades, including the progress in advanced control theory and method, intelligent control and decision-making of complex metallurgical processes, intelligent systems and machine learning, intelligent robot systems design and control, and prediction and control technology for renewable energy. With the depth and breadth of coverage of this book, it serves as a useful reference for engineers in the field of automation and complex process control and graduate students interested in advanced control theory and computational intelligence as well as their applications to the complex industrial processes. This book offers an up-to-date overview of this active research area. It provides readers with the state-of-the-art methods for advanced control and intelligent automation for complex systems
Download or read book Real time Simulation for Sustainable Production written by Juhani Ukko and published by Routledge. This book was released on 2021-05-30 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of potential opportunities and the business value position related to implementing physics-based real-time simulation to production. The objective of real-time simulation is to provide value for all three dimensions of sustainability: economic, social, and environmental. By reviewing actual industrial cases and presenting relevant academic research, the book examines the topic from four interrelated viewpoints: the industrial need for sustainable production, the development of game-like virtual environments, capturing customer value and enhancing the user experience, and finally, establishing business value. It offers a framework that will enable a rethink and shift in mindset to appreciate how real-time simulation can change the way products are manufactured and services are produced. This book will appeal to researchers and scholars in areas as diverse as strategic management, manufacturing and operations management, marketing, industrial economics, and product lifecycle management.
Download or read book Real Time Simulation Technologies Principles Methodologies and Applications written by Katalin Popovici and published by CRC Press. This book was released on 2017-12-19 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-Time Simulation Technologies: Principles, Methodologies, and Applications is an edited compilation of work that explores fundamental concepts and basic techniques of real-time simulation for complex and diverse systems across a broad spectrum. Useful for both new entrants and experienced experts in the field, this book integrates coverage of detailed theory, acclaimed methodological approaches, entrenched technologies, and high-value applications of real-time simulation—all from the unique perspectives of renowned international contributors. Because it offers an accurate and otherwise unattainable assessment of how a system will behave over a particular time frame, real-time simulation is increasingly critical to the optimization of dynamic processes and adaptive systems in a variety of enterprises. These range in scope from the maintenance of the national power grid, to space exploration, to the development of virtual reality programs and cyber-physical systems. This book outlines how, for these and other undertakings, engineers must assimilate real-time data with computational tools for rapid decision making under uncertainty. Clarifying the central concepts behind real-time simulation tools and techniques, this one-of-a-kind resource: Discusses the state of the art, important challenges, and high-impact developments in simulation technologies Provides a basis for the study of real-time simulation as a fundamental and foundational technology Helps readers develop and refine principles that are applicable across a wide variety of application domains As science moves toward more advanced technologies, unconventional design approaches, and unproven regions of the design space, simulation tools are increasingly critical to successful design and operation of technical systems in a growing number of application domains. This must-have resource presents detailed coverage of real-time simulation for system design, parallel and distributed simulations, industry tools, and a large set of applications.
Download or read book Computer Aided Design in Control and Engineering Systems written by P. Martin Larsen and published by Elsevier. This book was released on 2014-05-17 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Aided Design in Control and Engineering Systems contains the proceedings of the 3rd International Federation of Automatic Control/International Federation for Information Processing Symposium held in Lyngby, Denmark, from July 31 to August 2, 1985. The papers review the state of the art and the trends in development of computer aided design (CAD) of control and engineering systems, techniques, procedures, and concepts. This book is comprised of 74 chapters divided into 17 sections and begins with a description of a prototype computer environment that combines expert control system analysis and design tools. The discussion then turns to decision support systems which could be used to address problems of management and control of large-scale multiproduct multiline batch manufacturing outside the mechanical engineering industries. The following chapters focus on the use of CAD in control education, industrial applications of CAD, and hardware/software systems. Some examples of universal and specialized CAD packages are presented, and applications of CAD in electric power plants, process control systems, and transportation systems are highlighted. The remaining chapters look at CAD/computer aided engineering/computer aided manufacturing systems as well as the use of mathematical methods in CAD. This monograph will be of interest to practitioners in computer science, computer engineering, and industrial engineering.
Download or read book Frontiers in Advanced Control Systems written by Ginalber Luiz Serra and published by BoD – Books on Demand. This book was released on 2012-07-25 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book pretends to bring the state-of-art research results on advanced control from both the theoretical and practical perspectives. The fundamental and advanced research results as well as the contributions in terms of the technical evolution of control theory are of particular interest. This book can serve as a bridge between people who are working on the theoretical and practical research on control theory, and facilitate the proposal of development of new control techniques and its applications. In addition, this book presents educational importance to help students and researchers to know the frontiers of the control technology.
Download or read book A Real Time Approach to Process Control written by William Y. Svrcek and published by John Wiley & Sons. This book was released on 2013-03-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Real- Time Approach to Process Control provides the reader with both a theoretical and practical introduction to this increasingly important approach. Assuming no prior knowledge of the subject, this text introduces all of the applied fundamentals of process control from instrumentation to process dynamics, PID loops and tuning, to distillation, multi-loop and plant-wide control. In addition, readers come away with a working knowledge of the three most popular dynamic simulation packages. The text carefully balances theory and practice by offering readings and lecture materials along with hands-on workshops that provide a 'virtual' process on which to experiment and from which to learn modern, real time control strategy development. As well as a general updating of the book specific changes include: A new section on boiler control in the chapter on common control loops A major rewrite of the chapters on distillation column control and multiple single-loop control schemes The addition of new figures throughout the text Workshop instructions will be altered to suit the latest versions of HYSYS, ASPEN and DYNSIM simulation software A new solutions manual for the workshop problems
Download or read book Artificial Intelligence in Real Time Control 1992 written by M.G. Rodd and published by Elsevier. This book was released on 2014-06-28 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: The symposium had two main aims, to investigate the state-of-the-art in the application of artificial intelligence techniques in real-time control, and to bring together control system specialists, artificial intelligence specialists and end-users. Many professional engineers working in industry feel that the gap between theory and practice in applying control and systems theory is widening, despite efforts to develop control algorithms. Papers presented at the meeting ranged from the theoretical aspects to the practical applications of artificial intelligence in real-time control. Themes were: the methodology of artificial intelligence techniques in control engineering; the application of artificial intelligence techniques in different areas of control; and hardware and software requirements. This symposium showed that there exist alternative possibilities for control based on artificial intelligence techniques.
Download or read book Process Modelling and Simulation in Chemical Biochemical and Environmental Engineering written by Ashok Kumar Verma and published by CRC Press. This book was released on 2014-10-17 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of simulation plays a vital part in developing an integrated approach to process design. By helping save time and money before the actual trial of a concept, this practice can assist with troubleshooting, design, control, revamping, and more. Process Modelling and Simulation in Chemical, Biochemical and Environmental Engineering explores ef
Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-08-30 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.
Download or read book Dynamics of Coupled Structures Volume 4 written by Matthew S. Allen and published by Springer. This book was released on 2017-04-23 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics of Coupled Structures, Volume 4: Proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics, 2017, the fourth volume of ten from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of the Dynamics of Coupled Structures, including papers on: Experimental Nonlinear Dynamics Joints, Friction & Damping Nonlinear Substructuring Transfer Path Analysis and Source Characterization Analytical Substructuring & Numerical Reduction Techniques Real Time Substructuring Assembling & Decoupling Substructures & Boundary Conditions
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Encyclopedia of Ergonomics and Human Factors 3 Volume Set written by Informa Healthcare and published by CRC Press. This book was released on 2006-03-15 with total page 3656 pages. Available in PDF, EPUB and Kindle. Book excerpt: The previous edition of the International Encyclopedia of Ergonomics and Human Factors made history as the first unified source of reliable information drawn from many realms of science and technology and created specifically with ergonomics professionals in mind. It was also a winner of the Best Reference Award 2002 from the Engineering Libraries
Download or read book Process Control Design for Industrial Applications written by Dumitru Popescu and published by John Wiley & Sons. This book was released on 2017-04-24 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most important methods used for the design of digital controls implemented in industrial applications. The best modelling and identification techniques for dynamical systems are presented as well as the algorithms for the implementation of the modern solutions of process control. The proposed described methods are illustrated by various case studies for the main industrial sectors There exist a number of books related each one to a single type of control, yet usually without comparisons for various industrial sectors. Some other books present modelling and identification methods or signal processing. This book presents the methods to solve all the problems linked to the design of a process control without the need to find additional information.
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1989 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
