Download or read book Advanced Concepts In Nuclear Energy Risk Assessment And Management written by Aldemir Tunc and published by World Scientific. This book was released on 2018-04-24 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 30 years, numerous concerns have been raised in the literature regarding the capability of static modeling approaches such as the event-tree (ET)/fault-tree (FT) methodology to adequately account for the impact of process/hardware/software/firmware/human interactions on nuclear power plant safety assessment, and methodologies to augment the ET/FT approach have been proposed. Often referred to as dynamic probabilistic risk/safety assessment (DPRA/DPSA) methodologies, which use a time-dependent phenomenological model of system evolution along with a model of its stochastic behavior to model for possible dependencies among failure events. The book contains a collection of papers that describe at existing plant level applicable DPRA/DPSA tools, as well as techniques that can be used to augment the ET/FT approach when needed. Contents: Shutdown Probabilistic Safety Assessment (Marko Čepin) Dynamic Probabilistic Risk Assessment Model Validation and Application -- Experience with ADS-IDAC, Version 2.0 (Kevin Coyne and Ali Mosleh) MCDET: A Tool for Integrated Deterministic Probabilistic Safety Analyses (Martina Kloos, Nadine Berner, Joerg Peschke and Josef Scheuer) Why Sequence Dynamics Matters in PSA: Checking Consistency of Probabilistic and Deterministic Analyses (J M Izquierdo, J Hortal, M Sánchez and E Meléndez) Level 2 Probabilistic Risk Assessment Using Dynamic Event Tree Analysis (Douglas M Osborn, Tunc Aldemir, Richard S Denning and Diego Mandelli) EDF Experience in Integrated Deterministic Probabilistic Safety Analysis for Risk Assessment (Valentin Rychkov) Offsite Power Reliability Assessment for Nuclear Power Plants: An Application of Dynamic Reliability to Power Systems (Pierre Henneaux and Pierre-Etienne Labeau) Stochastic Differential Equations in Dynamic Reliability (Vytis Kopustinskas, Henrikas Pragarauskas and Juozas Augutis) Dynamic Event Tree Modeling of a Reactor Coolant Pump Seal LOCA (Kyle Metzroth, Richard Denning and Tunc Aldemir) Markov/Cell-to-Cell Mapping Technique for Stochastic Modeling of Dynamic Systems (Tunc Aldemir) Dynamic Flowgraph Methodology (DFM) Modeling of Nuclear and Advanced Technology System Risk and Reliability Scenarios (Sergio Guarro and Michael Yau) Dynamic Behavior of Nuclear Power Plant State Under Severe Accident Conditions: Analysis by the GO-FLOW Methodology and the Consideration of Loop Structures (Takeshi Matsuoka) Dynamic Accident Scenario Generation, Modeling and Post-Processing for the Integrated Deterministic and Probabilistic Safety Analysis of Nuclear Power Plants (Francesco Di Maio and Enrico Zio) Software Behavior Modeling for Dynamic Probabilistic Risk Assessment: Perspectives (C S Smidts) Readership: Graduate students, researchers and professionals in the field of nuclear engineering, risk analysis and reliability engineering. Keywords: Probabilistic Risk Assessment;Nuclear Energy;Nuclear Plant Reliability and SafetyReview: Key Features: Except for PSAM, ESREL and PSA conference proceedings which may contain some relevant papers, the most recent review publication on similar topics is Proceedings of the International Workshop on Dynamic Reliability, C Smidts, T Aldemir (Eds.), The Center for Risk and Reliability, University of Maryland, USA (2007) In addition to capturing more recent developments, the proposed publication differs from 2007 publication by concentrating on nuclear energy and also containing papers on risk management The book is a compilation of papers by almost all prominent researchers active in the field of dynamic probabilistic safety/ris

Download or read book Risk and Safety Analysis of Nuclear Systems written by John C. Lee and published by John Wiley & Sons. This book was released on 2012-01-12 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has been developed in conjunction with NERS 462, a course offered every year to seniors and graduate students in the University of Michigan NERS program. The first half of the book covers the principles of risk analysis, the techniques used to develop and update a reliability data base, the reliability of multi-component systems, Markov methods used to analyze the unavailability of systems with repairs, fault trees and event trees used in probabilistic risk assessments (PRAs), and failure modes of systems. All of this material is general enough that it could be used in non-nuclear applications, although there is an emphasis placed on the analysis of nuclear systems. The second half of the book covers the safety analysis of nuclear energy systems, an analysis of major accidents and incidents that occurred in commercial nuclear plants, applications of PRA techniques to the safety analysis of nuclear power plants (focusing on a major PRA study for five nuclear power plants), practical PRA examples, and emerging techniques in the structure of dynamic event trees and fault trees that can provide a more realistic representation of complex sequences of events. The book concludes with a discussion on passive safety features of advanced nuclear energy systems under development and approaches taken for risk-informed regulations for nuclear plants.

Download or read book Probabilistic Risk Assessment in the Nuclear Power Industry written by R. R. Fullwood and published by Pergamon. This book was released on 1988 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a number of the more important improvements in risk assessment methodology in the nuclear industry, developed over the last decade. It presents them in an instructive way so as to be suitable for those wishing to understand the techniques. The methodology of modern probabilistic risk assessment (PRA) is discussed in detail. This book is divided into six parts. Part I, Protecting the Public Health and Safety provides an overview of risk analysis including results presentation, safety goals, emergency planning, and public perception. Part II, the Mathematics, which is necessary to understand the text. Part III, safety Aspects of Light Water Reactors describes the types of plants and goes on to discuss accident initiator selection and frequencies. Part IV, PRA, describes system modelling, human factors analysis, data bases, codes, system interactions, external events, core melt physics, and the transport of radionuclides to the public. Part V discusses 34 types of applications of PRA. Part VI, Resources, provides a glossary, references, and an index. Problems are provided at the end of each part to both stimulate understanding and introduce additional material. This book would be a very valuable addition to the reference library of practitioners in the risk assessment business. It is also a useful instructional text for graduate and undergraduate nuclear engineering students as well as newcomers to the field.

Download or read book Knowledge in Risk Assessment and Management written by Terje Aven and published by John Wiley & Sons. This book was released on 2017-12-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exciting new developments in risk assessment and management Risk assessment and management is fundamentally founded on the knowledge available on the system or process under consideration. While this may be self-evident to the laymen, thought leaders within the risk community have come to recognize and emphasize the need to explicitly incorporate knowledge (K) in a systematic, rigorous, and transparent framework for describing and modeling risk. Featuring contributions by an international team of researchers and respected practitioners in the field, this book explores the latest developments in the ongoing effort to use risk assessment as a means for characterizing knowledge and/or lack of knowledge about a system or process of interest. By offering a fresh perspective on risk assessment and management, the book represents a significant contribution to the development of a sturdier foundation for the practice of risk assessment and for risk-informed decision making. How should K be described and evaluated in risk assessment? How can it be reflected and taken into account in formulating risk management strategies? With the help of numerous case studies and real-world examples, this book answers these and other critical questions at the heart of modern risk assessment, while identifying many practical challenges associated with this explicit framework. This book, written by international scholars and leaders in the field, and edited to make coverage both conceptually advanced and highly accessible: Offers a systematic, rigorous and transparent perspective and framework on risk assessment and management, explicitly strengthening the links between knowledge and risk Clearly and concisely introduces the key risk concepts at the foundation of risk assessment and management Features numerous cases and real-world examples, many of which focused on various engineering applications across an array of industries Knowledge of Risk Assessment and Management is a must-read for risk assessment and management professionals, as well as graduate students, researchers and educators in the field. It is also of interest to policy makers and business people who are eager to gain a better understanding of the foundations and boundaries of risk assessment, and how its outcomes should be used for decision-making.

Download or read book Nuclear Power written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction of nuclear power plants in the United States is stopping, as regulators, reactor manufacturers, and operators sort out a host of technical and institutional problems. This volume summarizes the status of nuclear power, analyzes the obstacles to resumption of construction of nuclear plants, and describes and evaluates the technological alternatives for safer, more economical reactors. Topics covered include: Institutional issues-including regulatory practices at the federal and state levels, the growing trends toward greater competition in the generation of electricity, and nuclear and nonnuclear generation options. Critical evaluation of advanced reactors-covering attributes such as cost, construction time, safety, development status, and fuel cycles. Finally, three alternative federal research and development programs are presented.

Download or read book Nuclear Energy Risk Management written by United States. Congress. House. Committee on Science, Space, and Technology (2011). Subcommittee on Investigations and Oversight and published by . This book was released on 2011 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Selected Topics in Probabilistic Safety Assessment written by Dan Serbanescu and published by Springer Nature. This book was released on 2020-02-19 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Probabilistic Safety Assessment (PSA) is a structured, comprehensive, and logical analysis method aimed at identifying and assessing risks in complex technological systems, such as the nuclear power plants. It is also known as probabilistic risk assessment – PRA. This book presents the theoretical basis to understand the numerous and complex aspects that are covered by PSA and it will help the reader to better understand and to effectively manage risks. The book provides PSA methods and techniques and it includes recommended procedures that are based on the experience of the authors and applicable to different levels and types of PSA that are used for nuclear power plants applications. It can be used as extra reading for PSA courses for practitioners and it provides quantitative risk methodology documentation for PSA.

Download or read book Treatment of Internal Fires in Probabilistic Safety Assessment for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1998 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Report provides information on good practices in conducting probabilistic safety assessment (PSA) for fires in land based nuclear power plants. It has been developed in response to the increasing attention being given to PSA worldwide and is intended to facilitate the implementation of the risk based approach to fire safety assessment for both new and operating nuclear power plants.

Download or read book Advanced Security and Safeguarding in the Nuclear Power Industry written by Victor Nian and published by Academic Press. This book was released on 2020-08-31 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Security and Safeguarding in the Nuclear Power Industry: State of the art and future challenges presents an overview of a wide ranging scientific, engineering, policy, regulatory, and legal issues facing the nuclear power industry. Editor Victor Nian and his team of contributors deliver a much needed review of the latest developments in safety, security and safeguards ("Three S's”) as well as other related and important subject matters within and beyond the nuclear power industry. This book is particularly insightful to countries with an interest in developing a nuclear power industry as well as countries where education to improve society's opinion on nuclear energy is crucial to its future success. Advanced Security and Safeguarding in the Nuclear Power Industry covers the foundations of nuclear power production as well as the benefits and impacts of radiation to human society, international conventions, treaties, and standards on the "Three S's”, emergency preparedness and response, and civil liability in the event of a nuclear accident. The socio-technical and economic risks of civilian and military applications of atomic energy Putting into perspective the hazards of radioactive sources and health impacts of exposure to radiation Prevention and protection against severe nuclear accidents with a much needed update on lessons learnt from "Fukushima” International conventions, treaties, legal frameworks, standards and best practices on "Three S's”, emergency preparedness and response, and civil liability Evolving technological and institutional challenges facing the nuclear power industry in the future

Download or read book Risk informed Methods and Applications in Nuclear and Energy Engineering written by Curtis Smith and published by Academic Press. This book was released on 2023-11-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk-informed Methods and Applications in Nuclear and Energy Engineering: Modelling, Experimentation, and Validation presents a comprehensive view of the latest technical approaches and experimental capabilities in nuclear energy engineering. Based on Idaho National Laboratory’s popular summer school series, this book compiles a collection of entries on the cutting-edge research and knowledge presented by proponents and developers of current and future nuclear systems, focusing on the connection between modelling and experimental approaches. Included in this book are key topics such as probabilistic concepts for risk analysis, the survey of legacy reliability and risk analysis tools, and newly developed tools supporting dynamic probabilistic risk-assessment. This book is an insightful and inspiring compilation of work from top nuclear experts from INL. Industry professionals, researchers and academics working in nuclear engineering, safety, operations and training will gain a board picture of the current state-of-practice and be able to apply that to their own risk-assessment studies. Based on Idaho National Laboratory’s summer school series, this book is a collection of entries from proponents and developers of current and future nuclear systems Provides an up-to-date view of current technical approaches and experimental capabilities in nuclear energy engineering, covering modeling and validation, and focusing on risk-informed methods and applications Equips the reader with an understanding of various case studies and experimental validations to enable them to carry out a risk-assessment study

Download or read book Risk Management of Non Renewable Energy Systems written by Ajit Kumar Verma and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the basic concepts of risk and reliability with detailed descriptions of the different levels of probabilistic safety assessment of nuclear power plants (both internal and external). The book also maximizes readers insights into time dependent risk analysis through several case studies, whilst risk management with respect to non renewable energy sources is also explained. With several advanced reactors utilizing the concept of passive systems, the reliability estimation of these systems are explained in detail with the book providing a reliability estimation of components through mechanistic model approach. This book is useful for advanced undergraduate and post graduate students in nuclear engineering, aerospace engineering, industrial engineering, reliability and safety engineering, systems engineering and applied probability and statistics. This book is also suitable for one-semester graduate courses on risk management of non renewable energy systems in all conventional engineering branches like civil, mechanical, chemical, electrical and electronics as well as computer science. It will also be a valuable reference for practicing engineers, managers and researchers involved in reliability and safety activities of complex engineering systems.

Download or read book The Risks of Nuclear Energy Technology written by Günter Kessler and published by Springer. This book was released on 2014-08-22 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book analyses the risks of nuclear power stations. The security concept of reactors is explained. Measures against the spread of radioactivity after a severe accident, accidents of core melting and a possible crash of an air plane on reactor containment are discussed. The book covers three scientific subjects of the safety concepts of Light Water Reactors: – A first part describes the basic safety design concepts of operating German Pressurized Water Reactors and Boiling Water Reactors including accident management measures introduced after the reactor accidents of Three Mile Island and Chernobyl. These safety concepts are also compared with the experiences of the Fukushima accidents. In addition, the safety design concepts of the future modern European Pressurized Water Reactor (EPR) and of the future modern Boiling Water Reactor SWR-1000 (KERENA) are presented. These are based on new safety research results of the past decades. – In a second, part the possible crash of military or heavy commercial air planes on reactor containment is analyzed. It is shown that reactor containments can be designed to resist to such an airplane crash. – In a third part, an online decision system is presented. It allows to analyze the distribution of radioactivity in the atmosphere and to the environment after a severe reactor accident. It provides data for decisions to be taken by authorities for the minimization of radiobiological effects to the population. This book appeals to readers who have an interest in save living conditions and some understanding for physics or engineering.

Download or read book Design basis Accident Analysis Methods For Light water Nuclear Power Plants written by Robert Martin and published by World Scientific. This book was released on 2019-02-13 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book captures the principles of safety evaluation as practiced in the regulated light-water reactor nuclear industry, as established and stabilized over the last 30 years. It is expected to serve both the current industry and those planning for the future. The work's coverage of the subject matter is the broadest to date, including not only the common topics of modeling and simulation, but also methods supporting the basis for the underlying assumptions, the extension to radiological safety, what to expect in a licensing review, historical perspectives and the implication for new designs.This text is an essential resource for practitioners and students, on the current best-practices in nuclear power plant safety and their basis. Contributors of this work are subject matter experts in their specialties, much of which was nurtured and inspired by Prof. Larry Hochreiter, a prominent nuclear safety pioneer.Related Link(s)

Download or read book Energy Risk Management written by Gordon T. Goodman and published by . This book was released on 1979 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Supported Risk Management written by Giampiero Beroggi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in information technology provide opportunities for the development of computer systems that support risk managers in complex tasks. Leading experts report on the potentials and limitations concerning the use of computer systems in risk management. Their reports are based on many years of experience in their fields which include: risk analysis, systems engineering, geographic information systems, decision support systems, human--machine systems, and psychology. The book addresses four major issues in computer supported risk management: Conceptual aspects: the role, design, and use of computers in risk management Planning and policy analysis: transportation, equity analysis, emergency management, group decision making Operational decision making: nuclear power monitoring, emergency response, public safety warning, satellite tracking Commercial applications: GIS from IIASA, InterClair from IAEA, EPA software, cleanup decision support software survey. This book is meant for researchers, who will find the emerging issues in risk management that are motivated by the encounter of new tasks and novel technology; practitioners who will have descriptions and references of the state-of-the-art models and software; and students who will learn the basic concepts needed to develop advanced information and decision support systems in risk management.

Download or read book Reliability of Nuclear Power Plants written by Andre Lannoy and published by John Wiley & Sons. This book was released on 2022-08-19 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1970s, the field of industrial reliability has evolved significantly, in part due to the design and early operation of the first generation nuclear power plants. Indeed, the needs of this sector have led to the development of specific and innovative reliability methods, which have since been taken up and adapted by other industrial sectors, leading to the development of the management of uncertainties and Health and Usage Monitoring Systems. In this industry, reliability assessment approaches have matured. There are now methods, data and tools available that can be used with confidence for many industrial applications. The purpose of this book is to present and illustrate them with real study cases. The book addresses the evolution of reliability methods, experience feedback and expertise (as data is essential for estimating reliability), the reliability of socio-technical systems and probabilistic safety assessments, the structural reliability and probabilistic models in mechanics, the reliability of equipment and the impact of maintenance on their behavior, human and organizational factors and the impact of big data on reliability. Finally, some R&D perspectives that can be developed in the future are presented. Written by several engineers, statisticians and human and organizational factors specialists in the nuclear sector, this book is intended for all those who are faced with a reliability assessment of their installations or equipment: decision-makers, engineers, designers, operation or maintenance engineers, project managers, human and organizational factors specialists, experts and regulatory authority inspectors, teachers, researchers and doctoral students.

Download or read book Nuclear Fuel Reprocessing and Waste Management written by Zhang Jinsuo and published by World Scientific. This book was released on 2018-08-07 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The question of how to effectively, efficiently, and responsibly manage used nuclear fuels is a concern of major impediment in the light of today's increasing usage of nuclear power and development of advanced nuclear reactors. This book focuses on two significant areas of (used) nuclear fuel: the reprocessing technology, and waste disposal and management. The book covers the fundamental knowledge, the current state-of-the-art, and future research activities for each topic. This book provides readers with the fundamental knowledge behind of nuclear used fuel reprocessing and radioactive waste management, and their technical applications, and their requirements and practices; to make the readers aware of social, economic, and environmental concerns as well as technical research needs. The book covers two well-known and well-developed reprocessing technologies: aqueous reprocessing technology, and electrochemical pyroprocessing. On the subject of waste management, it covers the dry storage of used nuclear fuel, novel waste form design, and nuclear waste disposal. This book is a good guide for readers who want to understand, apply, or develop the technologies.