Download or read book Advanced Characterization Techniques for Thin Film Solar Cells written by Daniel Abou-Ras and published by John Wiley & Sons. This book was released on 2016-10-10 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on advanced characterization methods for thin-film solar cells that have proven their relevance both for academic and corporate photovoltaic research and development. After an introduction to thin-film photovoltaics, highly experienced experts report on device and materials characterization methods such as electroluminescence analysis, capacitance spectroscopy, and various microscopy methods. In the final part of the book simulation techniques are presented which are used for ab-initio calculations of relevant semiconductors and for device simulations in 1D, 2D and 3D. Building on a proven concept, this new edition also covers thermography, transient optoelectronic methods, and absorption and photocurrent spectroscopy.

Download or read book Advanced Characterization of Thin Film Solar Cells written by Mowafak Al-Jassim and published by Institution of Engineering and Technology. This book was released on 2020-09-17 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polycrystalline thin-film solar cells have reached a levelized cost of energy that is competitive with all other sources of electricity. The technology has significantly improved in recent years, with laboratory cell efficiencies for cadmium telluride (CdTe), perovskites, and copper indium gallium diselenide (CIGS) each exceeding 22 percent. Both CdTe and CIGS solar panels are now produced at the gigawatt scale. However, there are ongoing challenges, including the continued need to improve performance and stability while reducing cost. Advancing polycrystalline solar cell technology demands an in-depth understanding of efficiency, scaling, and degradation mechanisms, which requires sophisticated characterization methods. These methods will enable researchers and manufacturers to improve future solar modules and systems.

Download or read book Advanced Characterization Techniques for Thin Film Solar Cells written by Daniel Abou-Ras and published by John Wiley & Sons. This book was released on 2016-07-13 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on advanced characterization methods for thin-film solar cells that have proven their relevance both for academic and corporate photovoltaic research and development. After an introduction to thin-film photovoltaics, highly experienced experts report on device and materials characterization methods such as electroluminescence analysis, capacitance spectroscopy, and various microscopy methods. In the final part of the book simulation techniques are presented which are used for ab-initio calculations of relevant semiconductors and for device simulations in 1D, 2D and 3D. Building on a proven concept, this new edition also covers thermography, transient optoelectronic methods, and absorption and photocurrent spectroscopy.

Download or read book Thin Film Solar Cells written by Jef Poortmans and published by John Wiley & Sons. This book was released on 2006-10-02 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-film solar cells are either emerging or about to emerge from the research laboratory to become commercially available devices finding practical various applications. Currently no textbook outlining the basic theoretical background, methods of fabrication and applications currently exist. Thus, this book aims to present for the first time an in-depth overview of this topic covering a broad range of thin-film solar cell technologies including both organic and inorganic materials, presented in a systematic fashion, by the scientific leaders in the respective domains. It covers a broad range of related topics, from physical principles to design, fabrication, characterization, and applications of novel photovoltaic devices.

Download or read book Thin Film Solar Cells From Earth Abundant Materials written by Subba Ramaiah Kodigala and published by Newnes. This book was released on 2013-11-14 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fundamental concept of the book is to explain how to make thin film solar cells from the abundant solar energy materials by low cost. The proper and optimized growth conditions are very essential while sandwiching thin films to make solar cell otherwise secondary phases play a role to undermine the working function of solar cells. The book illustrates growth and characterization of Cu2ZnSn(S1-xSex)4 thin film absorbers and their solar cells. The fabrication process of absorber layers by either vacuum or non-vacuum process is readily elaborated in the book, which helps for further development of cells. The characterization analyses such as XPS, XRD, SEM, AFM etc., lead to tailor the physical properties of the absorber layers to fit well for the solar cells. The role of secondary phases such as ZnS, Cu2-xS,SnS etc., which are determined by XPS, XRD or Raman, in the absorber layers is promptly discussed. The optical spectroscopy analysis, which finds band gap, optical constants of the films, is mentioned in the book. The electrical properties of the absorbers deal the influence of substrates, growth temperature, impurities, secondary phases etc. The low temperature I-V and C-V measurements of Cu2ZnSn(S1-xSex)4 thin film solar cells are clearly described. The solar cell parameters such as efficiency, fill factor, series resistance, parallel resistance provide handful information to understand the mechanism of physics of thin film solar cells in the book. The band structure, which supports to adjust interface states at the p-n junction of the solar cells is given. On the other hand the role of window layers with the solar cells is discussed. The simulation of theoretical efficiency of Cu2ZnSn(S1-xSex)4 thin film solar cells explains how much efficiency can be experimentally extracted from the cells. - One of the first books exploring how to conduct research on thin film solar cells, including reducing costs - Detailed instructions on conducting research

Download or read book Young Scientist Tutorial on Characterization Techniques for Thin film Solar Cells April 6 2015 written by and published by . This book was released on 2015 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Development of in situ methods for process monitoring and control and characterization of Cu Zn Sn S based thin films written by Van Duren, Stephan and published by Universitätsverlag der TU Berlin. This book was released on 2019-06-03 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, kesterite Cu2ZnSnS4 (CZTS) has become an interesting alternative to copper indium gallium (di)selenide (CIGS) due to its non-toxic and earth abundant constituents. A variety of methods is being used to fabricate kesterite thin films, such as coevaporation, sputtering, electrodeposition, spray pyrolysis and others. Most of them include an annealing step to stimulate elemental mixing and interdiffusion. Although conversion efficiencies of kesterite solar cells have increased among different research groups, the record value of 12.6% set by IBM in 2014 has not been broken yet. Therefore, experimental and theoretical studies are needed to predict the effect of the secondary phases and detrimental defects on the electronical properties of the CZTS based solar devices. The work presented here studies non-destructive techniques for in situ process control and monitoring. With the aim to detect phases and phase transitions to optimize crucial processing steps such as pre-annealing of metal precursors, high temperature annealing and vacuum deposition of Cu-Sn-Zn-S based thin films. The research consists of three parts in which Raman spectroscopy, X-ray diffraction (XRD) and reflectometry are used to explore this objective. In the first part Raman spectroscopy is investigated as an in situ monitoring technique during high temperature annealing of thin films. It investigates whether the occurrence of CZTS can be monitored when it is created from annealing a Mo/CTS/ZnS layered thin film. CuS, SnS, ZnS and CTS (Cu-Sn-S) films are prepared by physical vapor deposition. The Raman scattering intensity was compared to investigate whether their specific vibrational modes can be distinguished from each other at room temperature. Then, the CTS film is annealed between 50 and 550 °C in order to investigate whether CTS vibrational modes can be identified at elevated temperatures and to see which transitions take place within the thin film. Also, a CZTS reference film is annealed between 50 and 550 °C for reference purposes. The temperature dependence of the main CZTS modes is examined to investigate whether it can be used for in situ temperature control. Finally, a ZnS layer is deposited on the unannealed CTS film to obtain a Mo/CTS/ZnS layered film. This film is used to study the conversion of CTS/ZnS into CZTS at elevated temperatures. It was found that Raman spectroscopy can successfully be used to monitor formation of CZTS by identifying its main vibrational mode during the annealing process. The intensity of the CTS modes reduces at elevated temperatures. At 450 °C, the main CZTS mode at 338 cm-1 can be clearly identified. The second part also focuses on high temperature annealing. However, in this part the focus lies on annealing of the metal precursor films. It is explored whether specific alloys benefit or hinder the formation of secondary phases during formation of the CZTS absorber films. Also, to what extent this influences solar cell performance. In situ XRD was investigated for in situ monitoring of the pre-annealing process. Cu-poor metal precursor films are prepared by sputtering deposition. The precursors are annealed at 150 °C, 200 °C, 300 °C and 450 °C in a three zone tube furnace. The effect on the structural properties is analysed by XRD to study the formation mechanism of alloys. The precursor films are then sulfurized in a three zone tube furnace. The structural properties of the absorber are analysed and correlated with structures in the precursor. It is found that formation of SnS2 in the absorber is proportional to the remaining Sn in the pre-annealed precursor. Also, electron micrographs showed that pre-annealing temperature influences grain growth and surface precipitation of Sn-S and Zn-S. Pre-annealed absorbers at 450 °C did not exhibit these phases on the surface. Solar devices are fabricated from the absorber films and best performing devices were obtained from pre-annealed absorbers at 450 °C. They showed absence of Sn and SnS2 in, respectively, the precursor and absorber. It could be concluded that SnS2 phases are detrimental to device efficiency and that SnS2 XRD peak intensity follows an inverse proportionality with device efficiency. The third part explores reflectometry as a method to monitor a growing film during thermal evaporation in a physical vapor deposition (PVD) system. A set of six CZTS absorbers is examined by ex situ Raman spectroscopy and reflectometry to study the influence of secondary phases CuS and ZnS on reflection spectra. Composition strongly influences reflection spectra and CuS leaves a characteristic dip in the reflection spectrum at about 600 nm. An integration method was used to analyze this phenomenon quantitatively. Subsequently, a reflectometry setup is designed, developed and integrated in the PVD system. Four different CZTS co-evaporated and multi-layered films are deposited. Structural, morphological and vibrational properties are investigated. The reflection spectra are monitored during deposition and time-dependent reflection spectra are analyzed for characteristic aspects related to properties such as thickness, band gap and phase formation. CuS could not be detected in the films by the integration method due to the superposition of the CuS dip with developing interference fringes during film growth. However, in multilayered CTS/ZnS film it is found that the onset of ZnS deposition can be detected by increased reflection intensity due to reduced surface roughness. Additionally, the shifting onset of the interference fringes to lower photon energies can be used as a characteristic fingerprint during the deposition process. In conclusion, this work showed that Raman spectroscopy, XRD and reflectometry could be successfully implemented for in situ process control and monitoring of high temperature annealing and vacuum deposition of Cu-Sn-Zn-S based precursors and absorbers. The application of these in situ techniques can lead to the optimization of thin film material properties and solar cells. As such, this study has paved the way for further improvement of Cu-Sn-Zn-S based precursors and thin film absorbers. Innerhalb der letzten Jahre hat sich Kesterit Cu2ZnSnS4 (CZTS) aufgrund seiner ungiftigen Bestandteile und deren hoher Verfügbarkeit zu einer interessanten Alternative zu Kupfer Indium Gallium (di-)Selenid (CIGS) entwickelt. Zur Herstellung von Kesterit Dünnschichten wird eine Vielzahl von Methoden verwendet wie Ko-Verdampfung, Sputtern, Elektrodeposition, Spray Pyrolyse und andere. Die meisten davon beinhalten einen Temper-Schritt um die Durchmischung und Interdiffusion der Elemente zu stimulieren. Obwohl der Wirkungsgrad der Kersterit Solarzellen von verschiedenen Forschungsgruppen erhöht wurde, ist der Rekordwert von IBM von 12,6 % noch nicht gebrochen worden. Daher werden experimentelle und theoretische Studien benötigt, die den Einfluss von Fremdphasen und schädlichen Defekten auf die elektronischen Eigenschaften der CZTS Solarzellen vorhersagen. Die vorliegende Arbeit untersucht zerstörungsfreie Methoden für die in situ Prozesskontrolle und -überwachung. Dabei ist das Ziel, entscheidende Prozessschritte wie das Vortempern der Metall-Vorläufer sowie das Hochtemperatur-Tempern und die Vakuum-Abscheidung von Cu-Sn-Zn-S basierten Schichten zu optimieren. Die Untersuchung besteht aus drei Teilen, in denen Raman-Spektroskopie, Röntgendiffraktion (XRD) und Reflektometrie benutzt werden um dieses Ziel zu erreichen. Im ersten Teil wird die Ramanspektroskopie als in situ Methode zur Überwachung des Hochtemperatur-Temperns von Dünnschichten betrachtet. Es wird untersucht, ob das Entstehen von CZTS beim Tempern von gestapelten Mo/CTS/ZnS Dünnschichten beobachtet werden kann. CuS, SnS, ZnS und CTS (Cu-Sn-S) Schichten werden durch physikalische Gasabscheidung hergestellt. Die Intensität der Raman Streuung wurde vergleichen um zu untersuchen, ob die spezifischen Vibrations-Moden bei Raumtemperatur voneinander unterschieden werden können. Dann werden die CTS Schichten zwischen 50 °C und 550 °C getempert um zu untersuchen, ob die CTS Vibrations-Moden bei höheren Temperaturen identifiziert werden können und um festzustellen, welche Übergänge innerhalb der Schicht auftreten. Außerdem wurde eine CZTS Referenzschicht zwischen 50 °C und 550 °C für Referenzzwecke getempert worden. Die Temperaturabhängigkeit der CZTS Haupt-Moden werden betrachtet, um zu untersuche, ob sie für die in situ Temperaturüberwachung verwendet werden können. Abschließend wurde eine ZnS Schicht auf einem nicht getemperten CTS Film abgeschieden, um eine gestapelte Mo/CTS/ZnS Schicht zu erhalten. Diese Schicht wird verwendet, um die Umwandlung von CTS/ZnS zu CZTS bei erhöhten Temperaturen zu untersuchen. Es wurde festgestellt, dass Raman Spektroskopie erfolgreich verwendet werden kann, um die Bildung von CZTS zu überwachen, indem die Haupt-Vibrations-Moden während des Temperns identifiziert werden. Die Intensität der CTS Moden verringert sich bei höheren Temperaturen. Bei 450 °C kann die CZTS Hauptmode bei 338 cm-1 klar identifiziert werden. Der zweite Teil konzentriert sich ebenfalls auf das Hochtemperatur-Tempern. In diesem Teil liegt der Fokus allerdings auf dem Tempern der Metal-Vorläufer-Schichten. Es wird erforscht, ob bestimmte Legierungen die Entstehung von Fremdphasen während der Entstehung der CZTS Absorberschichten begünstigen oder hemmen und welchen Einfluss dies auf die Leistung der Solarzelle hat. In situ XRD wird verwendet, um die Prozesse des Vortemperns zu überwachen. Kupfer arme Metall-Vorläufer-Schichten werden durch Sputtern aufgetragen. Die Vorläufer werden bei 150 °C, 200 °C, 300 °C und 450 °C in einem Drei-Zonen-Röhren-Ofen getempert. Die Auswirkungen auf die strukturellen Eigenschaften werden mit XRD analysiert, um den Entstehungsmechanismus der Legierungen zu untersuchen. Die Vorläuferschichten werden dann in einem Drei-Zonen-Röhren-Ofen sulfurisiert. Die strukturellen Eigenschaften des Absorbers werden analysiert und mit der Struktur der Vorläufer korreliert. Es wurde festgestellt, dass die Entstehung von SnS2 im Absorber proportional zum verbleibenden Sn im vorgetemperten Vorläufer ist. Außerdem zeigen Bilder des Rasterelektronenmikroskops, dass die Temperatur des Vortemperns das Kornwachstum und das Abschieden von Sn-S und Zn-S an der Oberfläche beeinflusst. Bei 450 °C vorgetemperte Absorber weisen keine dieser Phasen an der Oberfläche auf. Solarzellen werden aus diesen Absorber-Schichten hergestellt und die besten Zellen entstanden aus den bei 450 °C vorgetemperten Absorbern. Bei diesen traten Sn und SnS2 weder im Vorläufer noch im Absorber auf. Es konnte geschlussfolgert werden, dass SnS2 Phasen schädlich für den Wirkungsgrad der Zellen sind und dass die Intensität der SnS2 XRD Peaks invers proportional zum Wirkungsgrad der Zellen ist. Der dritte Teil erforscht die Reflektometrie als Methode zur Überwachung des Schichtwachstums während des thermischen Verdampfens in einer Anlage zur physikalischen Gasabscheidung (PVD). Ein Satz aus sechs CZTS Absorbern wird mittels ex situ Raman-Spektroskopie und Reflektometrie vermessen, um den Einfluss der Fremdphasen CuS und ZnS auf die Reflexionsspektren zu untersuchen. Die Zusammensetzung beeinflusst die Reflexionsspektren stark und CuS hinterlässt eine charakteristische Senkung bei 600 nm im Reflexionsspektrum. Eine Integrationsmethode wurde verwendet um dieses Phänomen quantitativ zu analysieren. Anschließend wurde ein Reflektometrieaufbau entworfen, entwickelt und in die PVD-Anlage integriert. Vier verschiedene CZTS koverdampfte und Mehrschicht-Filme wurden abgeschieden. Strukturelle, morphologische und Vibrationseigenschaften werden untersucht. Die Reflexionsspektren werden während des Abscheidens aufgenommen und zeitabhängige Reflexionsspektren werden auf charakteristische Aspekte im Zusammenhang mit Eigenschaften wie Dicke, Bandlücke und Entstehung von Phasen untersucht. CuS konnte in den Schichten mit der Integrations-Methode wegen der Überlagerung der CuS Senkung mit dem entstehenden Interferenzmuster nicht detektiert werden. Allerdings wurde in gestapelten CTS/ZnS Schichten beobachtet werden, dass der Beginn der ZnS Abscheidung durch eine ansteigende Intensität der Reflektion aufgrund der verringerten Oberflächenrauigkeit detektiert werden kann. Zusätzlich kann die Verschiebung des Startpunkts der Interferenzen zu niedrigeren Photonenenergien als charakteristischer Fingerabdruck während des Abscheidungsprozesses verwendet werden. Zusammenfassend zeigt diese Arbeit, dass Raman-Spektroskopie, XRD und Reflektrometrie erfolgreich als in situ Prozesskontrolle und –überwachung bei Hochtemperatur-Tempern und Vakuum-Abscheidung von Cu-Sn-Zn-S basierten Vorläufern und Absorbern realisiert werden konnten. Die Anwendung dieser in situ Techniken kann zu einer Optimierung der Eigenschaften von Dünnschicht-Materialien und von Solarzellen führen. Als solche hat diese Untersuchung den Weg für weitere Verbesserung von Cu-Sn-Zn-S basierte Vorläufer und Dünnschicht-Absorber geebnet.

Download or read book Electronic Characterisation of Earth Abundant Sulphides for Solar Photovoltaics written by Thomas James Whittles and published by Springer. This book was released on 2018-07-31 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the electronic structure of earth-abundant and environmentally friendly materials for use as absorber layers within photovoltaic cells. The corroboration between high-quality photoemission measurements and density of states calculations yields valuable insights into why these materials have demonstrated poor device efficiencies in the vast literature cited. The book shows how the materials’ underlying electronic structures affect their properties, and how the band positions make them unsuitable for use with established solar cell technologies. After explaining these poor efficiencies, the book offers alternative window layer materials to improve the use of these absorbers. The power of photoemission and interpretation of the data in terms of factors generally overlooked in the literature, such as the materials’ oxidation and phase impurity, is demonstrated. Representing a unique reference guide, the book will be of considerable interest and value to members of the photoemission community engaged in solar cell research, and to a wider materials science audience as well.

Download or read book Spatially Resolved Characterization in Thin Film Photovoltaics written by Matevž Bokalič and published by Springer. This book was released on 2015-01-22 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to the spatial characterization of solar cells and PV modules. It is written both as a monograph as well as a succinct guide for the state-of-the-art spatial characterization techniques and approaches. Amongst the approaches discussed are visual imaging, electro- and photo-luminescence imaging, thermography, and light beam induced mapping techniques. Emphasis is given on the luminescence image acquisition and interpretation due to its great potential. Characterization techniques are accompanied by simulation tools. The contents are aimed at a readership of students and senior researchers in R&D as well as engineers in industry who are newcomers to the spatial characterization of either solar cells or PV modules. The concepts and approaches presented herein are based on but not limited to case studies of real thin-film PV devices. Key features:  Review of spatially resolved characterization techniques and accompanying SPICE simulations in photovoltaics  Use of spatially resolved characterization techniques and their combinations for the identification of inhomogeneities in small area CdTe and dye-sensitized solar cells  Case studies of electroluminescence imaging of commercial PV modules (c-Si, CIGS, CdTe, a-Si, tandem and triple junction thin-film-Si) The contents are aimed at a readership of students and senior researchers in R&D as well as engineers in industry who are newcomers to the spatial characterization of either solar cells or PV modules. The concepts and approaches presented herein are based on but not limited to case studies of real thin-film PV devices. Key features:  Review of spatially resolved characterization techniques and accompanying SPICE simulations in photovoltaics  Use of spatially resolved characterization techniques and their combinations for the identification of inhomogeneities in small area CdTe and dye-sensitized solar cells  Case studies of electroluminescence imaging of commercial PV modules (c-Si, CIGS, CdTe, a-Si, tandem and triple junction thin-film-Si)

Download or read book Fundamentals of Solar Cell Design written by Inamuddin and published by John Wiley & Sons. This book was released on 2021-08-24 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar cells are semiconductor devices that convert light photons into electricity in photovoltaic energy conversion and can help to overcome the global energy crisis. Solar cells have many applications including remote area power systems, earth-orbiting satellites, wristwatches, water pumping, photodetectors and remote radiotelephones. Solar cell technology is economically feasible for commercial-scale power generation. While commercial solar cells exhibit good performance and stability, still researchers are looking at many ways to improve the performance and cost of solar cells via modulating the fundamental properties of semiconductors. Solar cell technology is the key to a clean energy future. Solar cells directly harvest energy from the sun’s light radiation into electricity are in an ever-growing demand for future global energy production. Solar cell-based energy harvesting has attracted worldwide attention for their notable features, such as cheap renewable technology, scalable, lightweight, flexibility, versatility, no greenhouse gas emission, environment, and economy friendly and operational costs are quite low compared to other forms of power generation. Thus, solar cell technology is at the forefront of renewable energy technologies which are used in telecommunications, power plants, small devices to satellites. Aiming at large-scale implementation can be manipulated by various types used in solar cell design and exploration of new materials towards improving performance and reducing cost. Therefore, in-depth knowledge about solar cell design is fundamental for those who wish to apply this knowledge and understanding in industries and academics. This book provides a comprehensive overview on solar cells and explores the history to evolution and present scenarios of solar cell design, classification, properties, various semiconductor materials, thin films, wafer-scale, transparent solar cells, and so on. It also includes solar cells’ characterization analytical tools, theoretical modeling, practices to enhance conversion efficiencies, applications and patents.

Download or read book Cu In1 xGax Se2 Based Thin Film Solar Cells written by Subba Ramaiah Kodigala and published by Academic Press. This book was released on 2011-01-03 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cu(In1-xGax)Se2 Based Thin Film Solar Cells provides valuable contents about the fabrication and characterization of chalcopyrite Cu(In1-xGax)Se2 based thin film solar cells and modules. The growth of chalcopyrite Cu(In1-xGax)(S1-ySey)2 absorbers, buffers, window layers, antireflection coatings, and finally metallic grids, which are the sole components of solar cells, is clearly illustrated. The absorber, which contains multiple elements, segregates secondary phases if the growth conditions are not well optimized i.e., the main drawback in the fabrication of solar cells. More importantly the solutions for the growth of thin films are given in detail. The properties of all the individual layers and single crystals including solar cells analyzed by different characterization techniques such as SEM, AFM, XPS, AES, TEM, XRD, optical, photoluminescence, and Raman spectroscopy are explicitly demonstrated. The electrical analyses such as conductivities, Hall mobilities, deep level transient spectroscopy measurements etc., provide a broad picture to understand thin films or single crystals and their solar cells. The book clearly explains the working principle of energy conversion from solar to electrical with basic sciences for the chalcopyrite based thin film solar cells. Also, it demonstrates important criteria on how to enhance efficiency of the solar cells and modules. The effect of environmental factors such as temperature, humidity, aging etc., on the devices is mentioned by citing several examples. - Illustrates a number of growth techniques to prepare thin film layers for solar cells - Discusses characterization techniques such as XRD, TEM, XPS, AFM, SEM, PL, CL, Optical measurements, and Electrical measurements - Includes I-V, C-V measurements illustrations - Provides analysis of solar cell efficiency - Presents current trends in thin film solar cells research and marketing

Download or read book Electrical and Electronic Devices Circuits and Materials written by Suman Lata Tripathi and published by John Wiley & Sons. This book was released on 2021-03-24 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand for electronic devices for private and industrial purposes lead designers and researchers to explore new electronic devices and circuits that can perform several tasks efficiently with low IC area and low power consumption. In addition, the increasing demand for portable devices intensifies the call from industry to design sensor elements, an efficient storage cell, and large capacity memory elements. Several industry-related issues have also forced a redesign of basic electronic components for certain specific applications. The researchers, designers, and students working in the area of electronic devices, circuits, and materials sometimesneed standard examples with certain specifications. This breakthrough work presents this knowledge of standard electronic device and circuit design analysis, including advanced technologies and materials. This outstanding new volume presents the basic concepts and fundamentals behind devices, circuits, and systems. It is a valuable reference for the veteran engineer and a learning tool for the student, the practicing engineer, or an engineer from another field crossing over into electrical engineering. It is a must-have for any library.

Download or read book Silicon Based Thin Film Solar Cells written by Roberto Murri and published by Bentham Science Publishers. This book was released on 2013-03-20 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Based Thin Film Solar Cells explains concepts related to technologies for silicon (Si) based photovoltaic applications. Topics in this book focus on ‘new concept’ solar cells. These kinds of cells can make photovoltaic power production an economically viable option in comparison to the bulk crystalline semiconductor technology industry. A transition from bulk crystalline Si solar cells toward thin-film technologies reduces usage of active material and introduces new concepts based on nanotechnologies. Despite its importance, the scientific development and understanding of new solar cells is not very advanced, and educational resources for specialized engineers and scientists are required. This textbook presents the fundamental scientific aspects of Si thin films growth technology, together with a clear understanding of the properties of the material and how this is employed in new generation photovoltaic solar cells. The textbook is a valuable resource for graduate students working on their theses, young researchers and all people approaching problems and fundamental aspects of advanced photovoltaic conversion.

Download or read book Copper Zinc Tin Sulfide Based Thin Film Solar Cells written by Kentaro Ito and published by John Wiley & Sons. This book was released on 2015-02-23 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning with an overview and historical background of Copper Zinc Tin Sulphide (CZTS) technology, subsequent chapters cover properties of CZTS thin films, different preparation methods of CZTS thin films, a comparative study of CZTS and CIGS solar cell, computational approach, and future applications of CZTS thin film solar modules to both ground-mount and rooftop installation. The semiconducting compound (CZTS) is made up earth-abundant, low-cost and non-toxic elements, which make it an ideal candidate to replace Cu(In,Ga)Se2 (CIGS) and CdTe solar cells which face material scarcity and toxicity issues. The device performance of CZTS-based thin film solar cells has been steadily improving over the past 20 years, and they have now reached near commercial efficiency levels (10%). These achievements prove that CZTS-based solar cells have the potential to be used for large-scale deployment of photovoltaics. With contributions from leading researchers from academia and industry, many of these authors have contributed to the improvement of its efficiency, and have rich experience in preparing a variety of semiconducting thin films for solar cells.

Download or read book Fundamentals of Solar Cell Design written by Inamuddin and published by John Wiley & Sons. This book was released on 2021-07-30 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by one of the most well-respected and prolific engineers in the world and his team, this book provides a comprehensive overview of solar cells and explores the history of evolution and present scenarios of solar cell design, classification, properties, various semiconductor materials, thin films, wafer-scale, transparent solar cells, and other fundamentals of solar cell design. Solar cells are semiconductor devices that convert light photons into electricity in photovoltaic energy conversion and can help to overcome the global energy crisis. Solar cells have many applications including remote area power systems, earth-orbiting satellites, wristwatches, water pumping, photodetectors and remote radiotelephones. Solar cell technology is economically feasible for commercial-scale power generation. While commercial solar cells exhibit good performance and stability, still researchers are looking at many ways to improve the performance and cost of solar cells via modulating the fundamental properties of semiconductors. Solar cell technology is the key to a clean energy future. Solar cells directly harvested energy from the sun’s light radiation into electricity are in an ever-growing demand for future global energy production. Solar cell-based energy harvesting has attracted worldwide attention for its notable features, such as cheap renewable technology, scalable, lightweight, flexibility, versatility, no greenhouse gas emission, and economy friendly and operational costs. Thus, solar cell technology is at the forefront of renewable energy technologies which are used in telecommunications, power plants, small devices to satellites. Large-scale implementation can be manipulated by various types used in solar cell design and exploration of new materials towards improving performance and reducing cost. Therefore, in-depth knowledge about solar cell design is fundamental for those who wish to apply this knowledge and understanding in industries and academics. This book provides a comprehensive overview on solar cells and explores the history to evolution and present scenarios of solar cell design, classification, properties, various semiconductor materials, thin films, wafer-scale, transparent solar cells, and so on. It also includes solar cells’ characterization, analytical tools, theoretical modeling, practices to enhance conversion efficiencies, applications and patents. This outstanding new volume: Provides state-of-the-art information about solar cells Is a unique reference guide for researchers in solar energy Includes novel innovations in the field of solar cell technology Audience: This book is a unique reference guide that can be used by faculty, students, researchers, engineers, device designers and industrialists who are working and learning in the fields of semiconductors, chemistry, physics, electronics, light science, material science, flexible energy conversion, industrial, and renewable energy sectors..

Download or read book Fabrication and Characterization of Low Cost Solar Cells based on Earth Abundant Materials for Sustainable Photovoltaics written by Mahmoud Abdelfatah and published by Cuvillier Verlag. This book was released on 2016-07-08 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The low cost and low temperature electrochemical deposition technique was employed to grow Cu2O thin films and ZnO:Al thin films were deposited by d.c. magnetron sputtering in order to fabricate solar cells. The potentiostatic and galvanostatic electrodeposition modes were used to deposit the Cu2O thin films. Raman spectra of thin films have shown characteristic frequencies of crystalline Cu2O. The contact between Cu2O and Au is found to be an Ohmic contact. The devices grown by a potentiostatic mode have higher efficiency than those grown by a galvanostatic mode. The optimum thickness of Cu2O thin films as an absorber layer in solar cells. was found to be around 3 µm respect to a high efficiency. Flexible and light weight solar cell was fabricated on plastic substrate.

Download or read book Physics of Thin Film Photovoltaics written by Victor G. Karpov and published by John Wiley & Sons. This book was released on 2021-11-09 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: PHYSICS OF THIN-FILM PHOTOVOLTAICS Tackling one of the hottest topics in renewables, thin-film photovoltaics, the authors present the latest updates, technologies, and applications, offering the most up-to-date and thorough coverage available to the engineer, scientist, or student. It appears rather paradoxical that thin-film photovoltaics (PVs) are made of materials that seem unacceptable from the classical PV perspective, and yet they often outperform classical PV. This exciting new volume solves that paradox by switching to a new physics paradigm. Many concepts here fall beyond the classical PV scope. The differences lie in device thinness (microns instead of millimeters) and morphology (non-crystalline instead of crystalline). In such structures, the charge carriers can reach electrodes without recombination. On the other hand, thin disordered structures render a possibility of detrimental lateral nonuniformities (“recombination highways”), and their energy spectra give rise to new recombination modes. The mechanisms of thermal exchange and device degradation are correspondingly unique. The overall objective of this book is to give a self-contained in-depth discussion of the physics of thin-film systems in a manner accessible to both researchers and students. It covers most aspects of the physics of thin-film PV, including device operations, material structure and parameters, thin-film junction formation, analytical and numerical modeling, concepts of large area effects and lateral non-uniformities, physics of shunting (both shunt growth and effects), and device degradation. Also, it reviews a variety of physical diagnostic techniques proven with thin-film PV. Whether for the veteran engineer or the student, this is a must-have for any library. This outstanding new volume: Covers not only the state-of-the-art of thin-film photovoltaics, but also the basics, making this volume useful not just to the veteran engineer, but the new-hire or student as well Offers a comprehensive coverage of thin-film photovoltaics, including operations, modeling, non-uniformities, piezo-effects, and degradation Includes novel concepts and applications never presented in book format before Is an essential reference, not just for the engineer, scientist, and student, but the unassuming level of presentation also makes it accessible to readers with a limited physics background Is filled with workable examples and designs that are helpful for practical applications Is useful as a textbook for researchers, students, and faculty for understanding new ideas in this rapidly emerging field Audience: Industrial professionals in photovoltaics, such as engineers, managers, research and development staff, technicians, government and private research labs; also academic and research universities, such as physics, chemistry, and electrical engineering departments, and graduate and undergraduate students studying electronic devices, semiconductors, and energy disciplines