Download or read book Advanced Centrifugal Compressors written by American Society of Mechanical Engineers. Turbomachinery Committee and published by . This book was released on 1971 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Analysis of Centrifugal Compressors written by Rene Van den Braembussche and published by John Wiley & Sons. This book was released on 2019-01-14 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of fluid dynamic models and experimental results that can help solve problems in centrifugal compressors and modern techniques for a more efficient aerodynamic design. Design and Analysis of Centrifugal Compressors isacomprehensive overview of the theoretical fluid dynamic models describing the flow in centrifugal compressors and the modern techniques for the design of more efficient centrifugal compressors. The author — a noted expert in the field, with over 40 years of experience — evaluates relevant numerical and analytical prediction models for centrifugal compressors with special attention to their accuracy and limitations. Relevant knowledge from the last century is linked with new insights obtained from modern CFD. Emphasis is to link the flow structure, performance and stability to the geometry of the different compressor components. Design and Analysis of Centrifugal Compressors is an accessible resource that combines theory with experimental data and previous research with recent developments in computational design and optimization. This important resource Covers the basic information concerning fluid dynamics that are specific for centrifugal compressors and clarifies the differences with axial compressors Provides an overview of performance prediction models previously developed in combination with extra results from research conducted by the author Describes helpful numerical and analytical models for the flow in the different components in relation to flow stability, operating range and performance Includes the fundamental information for the aerodynamic design of more efficient centrifugal compressors Explains the use of computational fluid dynamics (CFD) for the design and analysis of centrifugal compressors Written for engineers, researchers and designers in industry as well as for academics specializing in the field, Design and Analysis of Centrifugal Compressors offers an up to date overview of the information needed for the design of more effective centrifugal compressors.
Download or read book Compressors and Modern Process Applications written by Heinz P. Bloch and published by John Wiley & Sons. This book was released on 2006-11-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern reference to the principles, operation, and applications of the most important compressor types Thoroughly addressing process-related information and a wider variety of the major compressor types of interest to process plants, Compressors and Modern Process Applications uniquely covers the systematic linkage of fluid processing machinery to the processes they serve. This book is a highly practical resource for professionals responsible for purchasing, servicing, or operating compressors. It describes the main features of over 300 petrochemical and refining schematics and associated process descriptions involving compressors and expanders in modern industry. The organized presentation of this reference covers first the basics of compressors and what they are, and then progresses to important operational and process issues. It then explains the underlying principles, operating modes, selection issues, and major hardware elements for compressors. Topics include double-acting positive displacement compressors, rotary positive displacement compressors, understanding centrifugal process gas compressors, power transmission and advanced bearing technology, centrifugal compressor performance, gas processing and turbo-expander applications, and compressors typically found in petroleum refining and other petrochemical processes. Suitable for plant operation personnel, machinery engineering specialists, process engineers,as well as undergraduate students of this subject, this book's special features include: * Flow schematics of modern process units and processes used in gas transport, gas conditioning, petrochemical manufacture, and petroleum refining * Listings of licensors for each process on the flow schematics * Identification of each process flow schematic of compressors, cryogenic, and hot gas expanders at their respective locations * Important overview of surge control, estimating compressor performance, applications for air separation and gas processing plants, petroleum refinery issues, and important criteria that govern compressor selection and application Placing hundreds of associated process flow schematics at the fingertips of professionals and students, author and industry expert Heinz Bloch facilitates comprehension of the workings of various petrochemical, oil refining, and product upgrading processes that are served by compressors.
Download or read book Numerical Investigation of Advanced Design Concepts for High pressure Ratio Centrifugal Compressors in Turbocharging Applications written by Rodrigo Rodriguez Erdmenger and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Centrifugal Compressors written by Klaus H. Lüdtke and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originating in the process compressor industry, this text primarily addresses: rotating equipment engineers, project engineers, engineering contractors, and compressor user companies in oil and gas field operations, natural gas processing, petroleum refining, petrochemical processing, industrial refrigeration, and chemical industries. It enables the reader to assess compressors and defines the constraints influencing the compressor design.
Download or read book Centrifugal Compressors written by Ronald H. Aungier and published by American Society of Mechanical Engineers. This book was released on 2000 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: A mechanical engineer with a Pennsylvania turbomachinery company, A ungier describes his own system and strategy for designing and analyzing centrifugal compressor aerodynamics. To address the novice as well as the experienced in the field, he presents the basic thermodynamic and fluid dynamic principles, empirical models, and key numerical methods that form the basis of his methods. His strategy, or design practice, he found harder to describe because it involves a process of reasoning rather than following an established set of principles. He recognizes that his is only one of many possible methods, but makes no effort to compare or contrast his with any other.
Download or read book Advanced Compressors written by North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development and published by . This book was released on 1970 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radial Flow Turbocompressors written by Michael Casey and published by Cambridge University Press. This book was released on 2021-06-10 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the theory and engineering practice that underpins the component design and analysis of radial flow turbocompressors. Drawing upon an extensive theoretical background and years of practical experience, the authors provide descriptions of applications, concepts, component design, analysis tools, performance maps, flow stability, and structural integrity, with illustrative examples. Features wide coverage of all types of radial compressor over many applications unified by the consistent use of dimensional analysis. Discusses the methods needed to analyse the performance, flow, and mechanical integrity that underpin the design of efficient centrifugal compressors with good flow range and stability. Includes explanation of the design of all radial compressor components, including inlet guide vanes, impellers, diffusers, volutes, return channels, de-swirl vanes and side-streams. Suitable as a reference for advanced students of turbomachinery, and a perfect tool for practising mechanical and aerospace engineers already within the field and those just entering it.
Download or read book Control of Surge in Centrifugal Compressors by Active Magnetic Bearings written by Se Young Yoon and published by Springer Science & Business Media. This book was released on 2012-06-19 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surge Control of Active-magnetic-bearing-suspended Centrifugal Compressors sets out the fundamentals of integrating active magnetic bearing (AMB) rotor suspension technology in compressor systems, and describes how this relatively new bearing technology can be employed in active control of compressor surge initiation. The authors provide a self-contained and comprehensive review of rotordynamics and the fundamentals of AMB technology. The active stabilization of compressor surge employing AMBs in a machine is fully explored, from modeling of instability and controller design, to the implementation and experimental testing of the control algorithm in a specially-constructed, industrial-size centrifugal compression system. The results of these tests demonstrate the great potential of the new surge control method suggested in this text. This book will be useful for engineers in industries that involve turbocompressors and magnetic bearings, as well as for researchers and graduate students in the field of applied control. Whatever their level of experience, engineers working in the fields of turbomachinery, magnetic bearings, rotordynamics and controls will find the material in this book absorbing as all these important aspects of engineering are integrated to create a multi-disciplinary solution to a real-life industrial problem and the book is a suitable introduction to the area for newcomers.
Download or read book The Centrifugal Compressor Stage written by Thomas Barker Ferguson and published by . This book was released on 1963 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Mechanics and Thermodynamics of Turbomachinery written by S. Larry Dixon and published by Elsevier. This book was released on 2005-03-30 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition will continue to be of use to engineers in industry and technological establishments, especially as brief reviews are included on many important aspects of Turbomachinery, giving pointers towards more advanced sources of information. For readers looking towards the wider reaches of the subject area, very useful additional reading is referenced in the bibliography. The subject of Turbomachinery is in continual review, and while the basics do not change, research can lead to refinements in popular methods, and new data can emerge. This book has applications for professionals and students in many subsets of the mechanical engineering discipline, with carryover into thermal sciences; which include fluid mechanics, combustion and heat transfer; dynamics and vibrations, as well as structural mechanics and materials engineering. An important, long overdue new chapter on Wind Turbines, with a focus on blade aerodynamics, with useful worked examples Includes important material on axial flow compressors and pumps Example questions and answers throughout
Download or read book Compressor Surge and Rotating Stall written by Jan Tommy Gravdahl and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology impacts all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies . . . , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Operating plant as close as possible to constraint boundaries so often brings economic benefits in industrial process control. This is the conundrum at the heart of this monograph by Tommy Gravdahl and Olav Egeland on stall control for compressors. Operation of the compressor closer to the surge line can increase operational efficiency and flexibility The approach taken by the authors follows the modern control system paradigm: -physical understanding, detailed modelling and simulation studies and finally control studies. The thoroughness of the presentation, bibliography and appendices indicates that the volume has all the hallmarks of being a classic for its subject. Despite the monograph's narrow technical content, the techniques and insights presented should appeal to the wider industrial control community as well as the gas turbine/compressor specialist. M. J. Grimble and M. A.
Download or read book Design Modeling and Reliability in Rotating Machinery written by Robert X. Perez and published by John Wiley & Sons. This book was released on 2022-01-20 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design, Modeling, and Reliability in ROTATING MACHINERY This broad collection of current rotating machinery topics, written by industry experts, is a must-have for rotating equipment engineers, maintenance personnel, students, and anyone else wanting to stay abreast with current rotating machinery concepts and technology. Rotating machinery represents a broad category of equipment, which includes pumps, compressors, fans, gas turbines, electric motors, internal combustion engines, and other equipment, that are critical to the efficient operation of process facilities around the world. These machines must be designed to move gases and liquids safely, reliably, and in an environmentally friendly manner. To fully understand rotating machinery, owners must be familiar with their associated technologies, such as machine design, lubrication, fluid dynamics, thermodynamics, rotordynamics, vibration analysis, condition monitoring, maintenance practices, reliability theory, and other topics. The goal of the “Advances in Rotating Machinery” book series is to provide industry practitioners a time-savings means of learning about the most up-to-date rotating machinery ideas and best practices. This three-book series will cover industry-relevant topics, such as design assessments, modeling, reliability improvements, maintenance methods and best practices, reliability audits, data collection, data analysis, condition monitoring, and more. This first volume begins the series by focusing on rotating machinery design assessments, modeling and analysis, and reliability improvement ideas. This broad collection of current rotating machinery topics, written by industry experts, is a must-have for rotating equipment engineers, maintenance personnel, students, and anyone else wanting to stay abreast with current rotating machinery concepts and technology. Design, Modeling, and Reliability in Rotating Machinery covers, among many other topics: Rotordynamics and torsional vibration modeling Hydrodynamic bearing design theory and current practices Centrifugal and reciprocating compressor design and analysis Centrifugal pump design, selection, and monitoring General purpose steam turbine sizing
Download or read book Fluid Mechanics and Thermodynamics of Turbomachinery written by Sydney Lawrence Dixon and published by Elsevier. This book was released on 1998 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the intervening 20 years since the 3rd edition of this textbook many advances have been made in the design of turbines and greater understanding of the processes involved have been gained. This 4th edition brings the book up to date.
Download or read book Fundamentals of Turbomachinery written by William W. Peng and published by John Wiley & Sons. This book was released on 2007-12-21 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to turbomachines and their applications With up-to-date coverage of all types of turbomachinery for students and practitioners, Fundamentals of Turbomachinery covers machines from gas, steam, wind, and hydraulic turbines to simple pumps, fans, blowers, and compressors used throughout industry. After reviewing the history of turbomachinery and the fluid mechanical principles involved in their design and operation, the book focuses on the application and selection of machines for various uses, teaching basic theory as well as how to select the right machine for a specific use. With a practical emphasis on engineering applications of turbomachines, this book discusses the full range of both turbines and pumping devices. For each type, the author explains: * Basic principles * Preliminary design procedure * Ideal performance characteristics * Actual performance curves published by the manufacturers * Application and appropriate selection of the machine Throughout, worked sample problems illustrate the principles discussed and end-of-chapter problems, employing both SI and the English system of units, provide practice to help solidify the reader's grasp of the material.
Download or read book Centrifugal Compressors written by Meherwan P. Boyce and published by . This book was released on 2003 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerodynamic Synthesis of a Centrifugal Impeller Using CFD and Measurements written by L. M. Larosiliere and published by . This book was released on 1997 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: The performance and flow structure in an unshrouded impeller of approximately 4:1 pressure ratio is synthesized on the basis of a detailed analysis of 3D viscous CFD results and aerodynamic measurements. A good data match was obtained between CFD and measurements using laser anemometry and pneumatic probes. This solidified the role of the CFD model as a reliable representation of the impeller internal flow structure and integrated performance. Results are presented showing the loss production and secondary flow structure in the impeller. The results indicate that while the overall impeller efficiency is high, the impeller shroud static pressure recovery potential is underdeveloped leading to a performance degradation in the downstream diffusing element. Thus, a case is made for a follow-on impeller parametric design study to improve the flow quality. A strategy for aerodynamic performance enhancement is outlined and an estimate of the gain in overall impeller efficiency that might be realized through improvements to the relative diffusion process is provided.
