Download or read book Advanced Applications of the Boundary Element Method to Groundwater Flow in Fractured Rock and Free Surface Hydrodynamics written by Daniel Ernesto Medina and published by . This book was released on 1989 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Boundary Element Method for Groundwater Flow written by Erwin K. Bruch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the application of the boundary element method to the solution of the Laplace equation is examined. This equation is of fundamental importance in engineering and science as it describes different types of phenomena, inclu- ding the groundwater flow applications highlighted in this book. Special subjects such as numerical integration, subdi- visionof the domain into regions and other computational aspects are discussed in detail in the first chapters. To demonstrate the accuracy and efficiency of the boundary ele- ment method, results obtained when solving the Laplace equa- tion have been compared against known analytical solutions. Other chapters deal with problems such as steady and unstea- dy flow in addition to infiltration problems. The applica- tions demonstrate that the boundary element method provides a powerful solution technique which can be effectively ap- plied to solve this type of problem.
Download or read book Finite Element Techniques in Groundwater Flow Studies written by I. Kazda and published by Elsevier. This book was released on 2012-12-02 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The finite element method (FEM) is one of those modern numerical methods whose rise and development was incited by the rapid development of computers. This method has found applications in all the technical disciplines as well as in the natural sciences.One of the most effective applications of the finite element method is its use for the solution of groundwater flow problems encountered in the design and maintenance of hydraulic structures and tailing dams, in soil mechanics, hydrology, hydrogeology and engineering geology.The stimuli to write this book came from the results obtained in the solution of practical problems connected both with the construction and maintenance of fill-type dams and tailing dams and the utilization of groundwater in Czechoslovakia, and on the other hand from the experience gained in teaching hydraulic structures theory at the Faculty of Civil Engineering of the Technical University of Prague. All the experience so far obtained shows markedly the advantages of the finite element method and the great possibilities of its further development as well as its considerable demands on the algorithmization, programming and use of computer possibilities. The reader will find an explanation of the fundamentals of the finite element method directed mainly toward isoparametric elements having an exceptional adaptability and numerical reliability. The finite element method application to groundwater flow concerns mainly two-dimensional problems, which occur most frequently in practice. Considerable attention is given to non-linear and non-stationary problems, which are most important in application.A computer program (based on the eight-noded isoparametric elements) is included and fully documented.The book will be useful to civil engineers, hydrogeologists and engineering geologists who need the finite element method as a solution tool for the complex problems encountered in engineering practice.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 1990 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Abstracts written by and published by . This book was released on 1990 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Methods in Subsurface Flow written by Peter S. Huyakorn and published by Academic Press. This book was released on 2012-12-02 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Methods in Subsurface Flow explores the application of all of the commonly encountered computational methods to subsurface problems. Among the problems considered in this book are groundwater flow and contaminant transport; moisture movement in variably saturated soils; land subsidence and similar flow and deformation processes in soil and rock mechanics; and oil and geothermal reservoir engineering. This book is organized into 10 chapters and begins with an introduction to partial differential and various solution approaches used in subsurface flow. The discussion then shifts to the fundamental theory of the finite element method, with emphasis on the Galerkin finite element method and how it can be used to solve a wide range of subsurface problems. The subjects treated range from simple problems of saturated groundwater flow to more complex ones of moisture movement and multiphase flow in petroleum reservoirs. The chapters that follow focus on fluid flow and mechanical deformation of conventional and fractured porous media; point and subdomain collocation techniques and the boundary element technique; and the applications of finite difference techniques to single- and multiphase flow and solute transport. The final chapter is devoted to other alternative numerical methods that are based on combinations of the standard finite difference approach and classical mathematics. This book is intended for senior undergraduate and graduate students in geoscience and engineering, as well as for professional groundwater hydrologists, engineers, and research scientists who want to solve or model subsurface problems using numerical techniques.
Download or read book Boundary Element Techniques written by C. A. Brebbia and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: VI SOCRATES: I think that we ought to stress that we will write only about things that we have first hand experience in, in a coherent way that will be useful to engineers and other scientists and stressing the formulation without being too mathematical. We should write with integrity and honesty, giving reference to other authors where reference is due, but avoiding mentioning everybody just to be certain that our book is widely advertised. Above all, the book should be clear and useful. PLATO: I think we should include a good discussion of fundamental ideas, of how integral equations are formed, pointing out that they are like two dimensional shadows of three dimensional objects, ... SOCRATES: Stop there! Remember you are not 'the' Plato! PLATO: Sorry, I was carried away. ARISTOTLE: I think that the book should have many applications so that the reader can learn by looking at them how to use the method. SOCRATES: I agree. But we should be careful. It is easy to include many illustra tions and examples in a book in order to disguise its meagre contents. All examples should be relevant. ARISTOTLE: And we should also include a full computer program to give the reader if so he wishes, a working experience of the technique.
Download or read book Topics in Boundary Element Research written by C. A. Brebbia and published by . This book was released on 1987 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first volume of this series dealt with the Basic Principles of Boundary Elements, while the second concentrated on time dependent problems and Volume three on the Computational Aspects of the method. This volume studies the applications of the method to a wide variety of geomechanics problems, most of which are ideally suited for boundary elements demonstrating the potentiality of the technique. Chapter 1 deals with the application of BEM to three dimensional elastody namics soil-structure interaction problems. It presents detailed formulations for rigid, massless foundations of arbitrary shape both in the frequency and time domains. The foundations are assumed to be resting on a linearly elastic, homogeneous, isotropic half-space and be subjected to externally applied loads on obliquely incident body. The chapter reviews the major advances in soil foundation interaction presents a series of numerical results and stresses the practical application of BEM, pointing out the high accuracy and efficiency of the technique, even when using coarse mesh discretizations.
Download or read book Fluid Flow in Fractured Rocks written by Robert W. Zimmerman and published by John Wiley & Sons. This book was released on 2023-12-19 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: FLUID FLOW IN FRACTURED ROCKS "The definitive treatise on the subject for many years to come" (Prof. Ruben Juanes, MIT) Authoritative textbook that provides a comprehensive and up-to-date introduction to fluid flow in fractured rocks Fluid Flow in Fractured Rocks provides an authoritative introduction to the topic of fluid flow through single rock fractures and fractured rock masses. This book is intended for readers with interests in hydrogeology, hydrology, water resources, structural geology, reservoir engineering, underground waste disposal, or other fields that involve the flow of fluids through fractured rock masses. Classical and established models and data are presented and carefully explained, and recent computational methodologies and results are also covered. Each chapter includes numerous graphs, schematic diagrams and field photographs, an extensive reference list, and a set of problems, thus providing a comprehensive learning experience that is both mathematically rigorous and accessible. Written by two internationally recognized leaders in the field, Fluid Flow in Fractured Rocks includes information on: Nucleation and growth of fractures in rock, with a multiscale characterization of their geometric traits Effect of normal and shear stresses on the transmissivity of a rock fracture and mathematics of fluid flow through a single rock fracture Solute transport in rocks, with quantitative descriptions of advection, molecular diffusion, and dispersion Fluid Flow in Fractured Rocks is an essential resource for researchers and postgraduate students who are interested in the field of fluid flow through fractured rocks. The text is also highly suitable for professionals working in civil, environmental, and petroleum engineering.
Download or read book Groundwater in Fractured Rocks written by John M. Sharp and published by CRC Press. This book was released on 2007-07-05 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: The hydrogeologic environment of fractured rocks represents vital natural systems, examples of which occur on every continent. This book discusses key issues, methodologies and techniques in the hydrogeology of fractured rocks, summarizing recent progress and anticipating the outcome of future investigations. Forty-four revised and updated papers w
Download or read book Composite Element Method for Modelling Transient Groundwater Flow in Fractured Media and Its Application to Slope Stability Problem written by Xiaoping Hou and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents a comprehensive numerical method for analyzing transient groundwater flow in porous and fractured media and its application to the analysis of the stability of soil and rock slopes subjected to transient groundwater flow induced by reservoir drawdown conditions. Compared to that of porous media, the analysis of flow in fractured media is relatively complex, due to the presence of a large number of fractures and strong variations in geometric and hydraulic properties.The thesis is organized in six chapters. Chapter 1 presents the issues to be addressed and the thesis objectives. Chapter 2 discusses basic theories related to the numerical analysis of groundwater flow in fractured media and its effects on slope stability.Chapter 3 develops the numerical model of transient, saturated flow in fractured media with a free surface using the composite element method (CEM). Chapter 4 presents the numerical model of transient, variably-saturated flow in fractured media using the CEM.Chapter 5 includes an investigation of the stability of homogeneous soil slopes under drawdown conditions, depending on the drawdown rate, hydraulic and strength parameters of soils, and slope geometry.The last chapter presents a parametric study on the influence of fracture characteristics on transient flow and stability of layered rock slope subjected to drawdown conditions.
Download or read book Boundary Element Methods for Engineers and Scientists written by Lothar Gaul and published by Springer Science & Business Media. This book was released on 2003-02-27 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory course on the classical Boundary Element Method also contains advanced topics such as the Dual Reciprocity and the Hybrid Boundary Element Methods. The latter methods are extensions that permit the application of BME to anisotropic materials, as well as multi-field problems and fluid-structure interaction. The class-tested textbook offers a clear and easy-to-understand introduction to the subject, including worked-out examples that describe all the basic features of the method. The first two chapters not only establish the mathematical basis for BEM but also review the basics of continuum mechanics for field problems, perhaps a unique feature for a text on numerical methods. This helps the reader to understand the physical principles of the field problems, to apply the method judiciously, and toe critically evaluate the results.
Download or read book New Developments in Boundary Element Methods written by C. A. Brebbia and published by . This book was released on 1980 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book American Doctoral Dissertations written by and published by . This book was released on 1989 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Topics in Boundary Element Research written by C. A. Brebbia and published by Springer. This book was released on 2013-11-11 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the Boundary Element Method develops into a tool of engineering analysis more effort is dedicated to studying new applications and solving different problems. This book contains chapters on the basic principles of the technique, time dependent problems, fluid mechanics, hydraulics, geomechanics and plate bending. The number of non-linear and time dependent problems which have become amenable to solution using boundary elements have induced many researchers to investigate in depth the basis of the method. Chapter 0 of this book presents an ap proach based on weighted residual and error approximations, which permits easy construction of the governing boundary integral equations. Chapter I reviews the theoretical aspects of integral equation formulations with emphasis in their mathematical aspects. The analysis of time dependent problems is presented in Chap. 2 which describes the time and space dependent integral formulation of heat conduction problems and then proposes a numerical procedure and time marching algorithm. Chapter 3 reviews the application of boundary elements for fracture mechanics analysis in the presence of thermal stresses. The chapter presents numerical results and the considerations on numerical accuracy are of interest to analysts as well as practising engineers.
Download or read book Boundary Element Methods in Engineering and Sciences written by M. H. Aliabadi and published by World Scientific. This book was released on 2011 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: The boundary element method (BEM), also known as the boundary integral equation method (BIEM), is a modern numerical technique. It is an established alternative to traditional computational methods of engineering analysis. This book provides a comprehensive account of the method and its application to problems in engineering and science.
Download or read book Peterson s Graduate Programs in Engineering and Applied Sciences 1996 written by Peterson's Guides and published by Peterson Nelnet Company. This book was released on 1995-12-10 with total page 1518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graduate students depend on this series and ask for it by name. Why? For over 30 years, it's been the only one-stop source that supplies all of their information needs. The new editions of this six-volume set contain the most comprehensive information available on more than 1,500 colleges offering over 31,000 master's, doctoral, and professional-degree programs in more than 350 disciplines.New for 1997 -- Non-degree-granting research centers, institutes, and training programs that are part of a graduate degree program.Five discipline-specific volumes detail entrance and program requirements, deadlines, costs, contacts, and special options, such as distance learning, for each program, if available. Each Guide features "The Graduate Adviser", which discusses entrance exams, financial aid, accreditation, and more.Interest in these fields has never been higher! And this is the source to the 3,400 programs currently available -- from bioengineering and computer science to construction management.
