Download or read book Advances in Cryogenic Engineering Materials written by Leonard T. Summers and published by Springer. This book was released on 2013-12-20 with total page 1456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1995 International Cryogenic Materials Conference (lCMC) was held at the Greater Columbus Convention Center in Columbus, Ohio, in conjunction with the Cryogenic Engineering Conference (CEC) on July 17-21. The interdependent subjects of the two conferences attracted more than eight hundred participants, who came to share the latest advances in low-temperature materials science and technology. They also came for the important by products of the conferences: identification of new research areas, of collaborative research possibilities, and the establishment and renewal of exploration professional relationships. Ted Collings (Ohio State University), as Chairmen of the 1995 ICMC; Ted Hartwig (Texas A&M University), as Program Chairman; and twenty-one other Program Committee members expertly arranged the ICMC technical sessions and related activities. The contributions of the CEC board and its Conference Chairman James B. Peeples of CVI, Inc., were central to the success of the eleventh CEC/ICMC. Jeff Bergen of Lake Shore Cryogenics served as Exhibits Chairman. Local arrangements and conference management were expertly handled under the guidance of Centennial Conferences, Inc. Skillful assistance with editing and preparation ofthese proceedings was provided by Ms. Vicky Bardos ofSynchrony, Inc.
Download or read book Advances in Cryogenic Engineering written by R.W. Fast and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1793 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1989 Cryogenic Engineering Conference, meeting jointly with the International Cryogenic Materials Conference, was held on the campus of the University of California, Los Angeles from July 24 to 28. Professor T.H.K. Frederking was the conference chairman. The Conference had previously met at U.C.L.A. in 1962 and 1969. A special symposium, "A Half Century of Superfluid Helium," was a significant part of the program of CEC-89. We were especially fortunate to have Professor Jack Allen of the University of St. Andrews, Scotland present at the Conference; his paper, "Early Superfluidity in Cambridge, 1936 to 1939," was a delightful, often humorous account of the early experimental work with superfluid helium. Professors V.L. Ginzburg and J.L. Olesen could not be present for the Symposium, but provided papers which are published in these proceedings. The late Bill Fairbank, responding graciously to a last-minute invitation from Professor Frederking, presented a wonderful account of superfluid research in the United States in the post-war years.
Download or read book Advances in Cryogenic Engineering Materials written by K.D. Timmerhaus and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Sixth International Cryogenic Materials Conference (ICMC) was held on the campus of Massachusetts Institute of Technology in Cambridge in col laboration with the Cryogenic Engineering Conference (CEC) on August 12-16, 1985. The complementary program and the interdependence of these two dis ciplines foster the conference. Its manifest purpose is sharing the latest advances in low temperature materials science and technology. Equally im portant, areas of needed research are identified, prioriti-es for new research are set, and an increased appreciation of interdisciplinary, interlaboratory, and international cooperation ensues. The success of the conference is the result of the. able leadership and hard work of many people: S. Foner of M.I.T. coordinated ICMC efforts as its Conference Chairman. A. I. Braginski of Westinghouse R&D Center planned the program with the assistance of Cochairmen E. N. C. Dalder of Lawrence Livermore National Laboratory, T. P. Orlando of M.I.T., D. O. Welch of Brookhaven National Laboratory, and numerous other committee members. A. M. Dawson of M.I.T., Chairman of Local Arrangements, and G. M. Fitzgerald, Chairman of Special Events, skillfully managed the joint conference. The contributions of the CEC Board, and particularly its conference chairman, J. L. Smith, Jr. of M.I.T., to the organization of the joint conference are also gratefully acknm.ledged.
Download or read book Advances in Cryogenic Engineering written by Peter Kittel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1973 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Hyatt Regency Hotel, Columbus, Ohio was the venue for the 1995 Cryogenic Engineering Conference. The meeting was held jointly with the International Cryogenic Materials Conference. Jim Peeples, of CVI, Inc., was conference chairman. Columbus is the home of the Battelle Memorial Institute, a pioneer in cryogenic materials development; the home of CVI, Inc., and Lake Shore Cryotronics, Inc., two leading manufacturers of cryogenic equipment; and it is the home of Ohio State University, where research on liquid helium has long been conducted. The program consisted of 315 CEC papers, nearly the same number as for CEC-91. This was the second largest number of papers ever submitted to the CEC. Of these, 252 papers are published here, in Volume 41 of Advances in Cryogenic Engineering. Once again the volume is published in two books. This volume includes a number of photographs taken during the awards lunch on July 20, 1995. Photographs have often been taken during the conferences, but they have never been used. The pictures are of the awardees, the conference chairs, and the organizers. They are distributed through out the books on pages that would otherwise have been blank. The pictures can be found on the following pages: 28, 232, 334, 536, 640, 826, 990, 1032, 1202, 1462,1682,1888, and 1994.
Download or read book Advances in Cryogenic Engineering Materials written by A. F. Clark and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fifth International Cryogenic Materials Conference (ICMC) was held in Colorado Springs, Colorado in collaboration with the Cryogenic Engineering Conference (CEC) on August 15-19, 1983. The growth and success of the joint conferences is a result of their complementary program and close cooperation. Materials remain a challenge in the application of cryogenic technology and sometimes, as in the case of superconductors, are the driving force for the technology. The association of materials and cryogenic engineers increases their awareness of recent research in their respective fi. elds and influences the course of future research and applications. Many contributed to the success of the 1983 conference: E. W. Collings of Battelle Memorial Institute was the ICMC Confer ence Chairman; M. Suenaga of Brookhaven National Laboratories, the ICMC Program Chairman; and L. L. Sparks of the National Bureau of Standards, the ICMC Local Arrangements Chairman. J. M. Wells and A. I. Braginski of Westinghouse R & D Center, G. Hartwig of the Nuclear Research Center of Karlsruhe, and K. T. Hartwig of the University of Wisconsin assisted the Program Chairman in metallic metals, superconducting materials, nonmetallic materials, and cryo physical properties, respectively. Excellent conference management was provided by Centennial Conferences. We especially thank M. Stieg, who coordinated the preparation of the papers for this volume. The CEC Board, especially their conference chairman, C. D. Henning of Lawrence Livermore National Laboratories, contributed very substan tially to conference planning and implementation.
Download or read book Helium Cryogenics written by Steven W. Van Sciver and published by Springer Science & Business Media. This book was released on 2012-02-10 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty five years have elapsed since the original publication of Helium Cryogenics. During this time, a considerable amount of research and development involving helium fluids has been carried out culminating in several large-scale projects. Furthermore, the field has matured through these efforts so that there is now a broad engineering base to assist the development of future projects. Helium Cryogenics, 2nd edition brings these advances in helium cryogenics together in an updated form. As in the original edition, the author's approach is to survey the field of cryogenics with emphasis on helium fluids. This approach is more specialized and fundamental than that contained in other cryogenics books, which treat the associated range of cryogenic fluids. As a result, the level of treatment is more advanced and assumes a certain knowledge of fundamental engineering and physics principles, including some quantum mechanics. The goal throughout the work is to bridge the gap between the physics and engineering aspects of helium fluids to provide a source for engineers and scientists to enhance their usefulness in low-temperature systems. Dr. Van Sciver is a Distinguished Research Professor and John H. Gorrie Professor of Mechanical Engineering at Florida State University. He is also a Program Director at the National High Magnetic Field Laboratory (NHMFL). Dr. Van Sciver joined the FAMU-FSU College of Engineering and the NHMFL in 1991, initiating and teaching a graduate program in magnet and materials engineering and in cryogenic thermal sciences and heat transfer. He also led the NHMFL development efforts of the cryogenic systems for the NHMFL Hybrid and 900 MHz NMR superconducting magnets. Between 1997 and 2003, he served as Director of Magnet Science and Technology at the NHMFL. Dr. Van Sciver is a Fellow of the ASME and the Cryogenic Society of America and American Editor for the journal Cryogenics. He is the 2010 recipient of the Kurt Mendelssohn Award. Prior to joining Florida State University, Dr. Van Sciver was Research Scientist and then Professor of Nuclear Engineering, Engineering Physics and Mechanical Engineering at the University of Wisconsin-Madison from 1976 to 1991. During that time he also served as the Associate Director of the Applied Superconductivity Center. Dr. Van Sciver received his PhD in Low Temperature Physics from the University of Washington-Seattle in 1976. He received his BS degree in Engineering Physics from Lehigh University in 1970. Dr. Van Sciver is author of over 200 publications and patents in low temperature physics, liquid helium technology, cryogenic engineering and magnet technology. The first edition of Helium Cryogenics was published by Plenum Press (1986). The present work is an update and expansion of that original project.
Download or read book Measurement of the Thermodynamic Properties of Multiple Phases written by Ron D. Weir and published by Gulf Professional Publishing. This book was released on 2005-12-27 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. Introduction. -- 2. Phase Changes in Pure Component Systems: Liquids and Gases. -- 3. Phase Changes in Pure Component Systems: Liquids and Solids. -- 4. Phase Changes in Pure Component Systems: Solid and Solid. -- 5. Vapour-Liquid Equilibrium at Low Pressure. -- 6. Vapour-Liquid Equilibrium at High Pressure. -- 7. Low Pressure Gas Solubility in Liquids. -- 8. Liquid-Liquid Equilibrium. -- 9. Condensed Phases of Organic Materials: Solid-Liquid and Solid-Solid Equilibrium. -- 10. Condensed Phases of Inorganic Materials: Metallic Systems. -- 11. Condensed Phases of Inorganic Materials: Ceramic Systems. -- 12. Condensed Phases of Inorganic Materials: Molten Salts. -- 13. Measurement of Limiting Activity Coefficients Using Non-Analytical Tools. -- 14. Measurement of Limiting Activity Coefficients Using Analytical Tools. -- 15. Measurement of Interfacial Tension. -- 16. Critical Parameters.
Download or read book Cryogenic Recycling and Processing written by Norman. R Braton and published by CRC Press. This book was released on 2018-06-14 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to promote useful knowledge in the field of cryogenics. To accomplish this, the manuscript presents a composite of the state-of-the-art knowledge, research, and application of cryogenic processes.
Download or read book The CRC Handbook of Thermal Engineering written by Frank Kreith and published by Springer Science & Business Media. This book was released on 2000-02-01 with total page 1214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique in its in-depth coverage of heat transfer and fluid mechanics including numerical and computer methods, applications, thermodynamics and fluid mechanics. It will serve as a comprehensive resource for professional engineers well into the new millennium. Some of the material will be drawn from the "Handbook of Mechanical Engineering," but with expanded information in such areas as compressible flow and pumps, conduction, and desalination.
Download or read book The Art of Cryogenics written by Guglielmo Ventura and published by Elsevier. This book was released on 2010-07-07 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cryogenics is the study of low temperature interactions - temperatures well below those existing in the natural universe. The book covers a large spectrum of experimental cases, including basic vacuum techniques, indispensable in cryogenics. Guidance in solving experimental problems and numerous numerical examples are given, as are examples of the applications of cryogenics in such areas as underground detectors and space applications. Updated tables of low-temperature data on materials are also presented, and the book is supplemented with a rich bibliography. Researchers (graduate and above) in the fields of physics, engineering and chemistry with an interest in the technology and applications of low-temperature measurements, will find this book invaluable. - Experiments described in technical detail - Description of newest cryogenic apparatus - Applications in multidisciplinary areas - Data on cryogenic properties of new materials - Current reference review
Download or read book Cryocoolers written by Graham Walker and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapidly expanding use of very low temperatures in research and high technology during the last several decades and the concurrent high degree of activity in cryogenic engineering have mutually supported each other, each improvement in refrigeration technique making possible wider oppor tunities for research and each new scientific discovery creating a need for a refrigerator with special features. In this book, Professor Walker has provided us with an excellent exposition of the achievements of this period, the fundamental principles involved, and a critical examination of the many different cryogenic systems which have led to a new era of low-level refrigeration. I feel fortunate to have had a part in the developments discussed in this book. During the early 1930s I constructed several rotary engines using leather vanes. Their performance was not good, but I was able to liquefy air. I had been impressed by the usefulness of leather cups in tire pumps and in Claude-type engines for air liquefaction. I was trying to find a way to avoid that part of the friction generated by a leather cup as a result of the radial force of the working gas on the cylindrical part of the cup. During the 1950s I built two efficient helium liquefiers in which essentially leather pistons were used.
Download or read book Aircraft Cryogenics written by Ernst Wolfgang Stautner and published by Springer Nature. This book was released on with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research and Technology Program Digest Flash Index written by and published by . This book was released on 1967 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research and Technology Program Digest written by United States. National Aeronautics and Space Administration and published by . This book was released on with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Superconductivity written by Peter J. Lee and published by John Wiley & Sons. This book was released on 2001-05-02 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive coverage of superconductivity from the Wiley Encyclopedia of Electrical and Electronics Engineering Engineering Superconductivity features fifty articles selected from the Wiley Encyclopedia of Electrical and Electronics Engineering, the one truly indispensable reference for electrical engineers. Superconductor technology has made highly advanced experiments possible in chemistry, biochemistry, particle physics, and health sciences, and introduced new applications currently in use in fields from medicine to cellular communications. Taken together, these articles-written by acknowledged experts in the field-provide the most complete and in-depth accounting of superconductivity in existence. The book brings together a wealth of information that would not be available to those who do not have access to the full 24-volume encyclopedia. This thorough survey looks at the application of superconductors from an engineer's practical perspective rather than a theoretical approach. Engineering Superconductivity provides full coverage of the fundamentals of superconducting behavior and explains the properties and fabrication methods of commercially produced superconductors. Up-to-date material on superconductor applications as well as competing technologies is included. The fifty articles presented here are divided into three sections: Superconductivity and magnetism Superconductors Applications and related technology Engineering Superconductivity is a complete and up-to-date reference for engineers, physicists, chemists, materials scientists, and anyone working with superconductors.
Download or read book Sustainable Design and Manufacturing 2019 written by Peter Ball and published by Springer. This book was released on 2019-06-27 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume consists of 52 peer-reviewed papers, presented at the International Conference on Sustainable Design and Manufacturing (SDM-19) held in Budapest, Hungary in July 2019. Leading-edge research into sustainable design and manufacturing aims to enable the manufacturing industry to grow by adopting more advanced technologies, and at the same time improve its sustainability by reducing its environmental impact. The topic includes the sustainable design of products and services; the sustainable manufacturing of all products; energy efficiency in manufacturing; innovation for eco-design; circular economy; industry 4.0; industrial metabolism; automotive and transportation systems. Application areas are wide and varied. The book will provide an excellent overview of the latest developments in the Sustainable Design and Manufacturing Area.
Download or read book Advances in Cryogenic Engineering written by J. G. Weisend and published by American Institute of Physics. This book was released on 2008-04-17 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: All papers have been peer-reviewed. This conference is the principal North American Conference on cryogenic engineering. It is attended by scientists and engineers from all over the world. The papers published here have been fully refereed and cover all aspects of cryogenic engineering including: refrigeration, superconductivity, cryocoolers, air liquefaction, heat and mass transfer, insulation systems, cryostat design and space cryogenics.