Download or read book Adsorption on Ordered Surfaces of Ionic Solids and Thin Films written by Hans-Joachim Freund and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption on Ordered Surfaces of Ionic Solids and Thin Films introduces to a new and topical field of surface science for which rather little experience is available at present. It reviews the recent results of the employed analytical methods comprising all modern surface techniques including scanning tunneling microscopy and various kinds of electron spectroscopies. The present status of this new, clearly defined field of surface science is nearly completely overviewed by contributions from most of the research groups active in this field. The book is meant as a basis for the expected rapid development in this area with applications in catalysis, thin-film and semiconductor technology, sensors, electrochemistry, controlled preparation of ultrathin epitaxial surfaces, and interfaces of insultors as well as future molecular electronics.
Download or read book Adsorption on Ordered Surfaces of Ionic Solids and Thin Films written by and published by . This book was released on 1993 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adsorption on Ordered Surfaces of Ionic Solids and Thin Films written by Hans-Joachim Freund and published by Springer Verlag. This book was released on 1993 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Films on Solid Surfaces written by J.G. Dash and published by Elsevier. This book was released on 2012-12-02 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Films on Solid Surfaces presents the physics and chemistry of physical adsorption. This book contains 10 chapters that are ordered according to the flow of a course given in a graduate study in University of Washington during 1973. The introductory chapter presents the motivation for the completion of the book. As the motivating factors are established, the book follows with the topic on atomic nature of physical adsorption and the states of single adsorbed atoms. A review of experimental techniques for the study of solid surfaces and films is given, as well as a discussion of substrate preparation and equilibrium thermodynamics. The various states of films and their phase transitions encompass four chapters. Lastly, the book also reviews thin film superfluidity. This book specifically caters to scientists in the fields of physics and biology working on physical adsorption and surface science.
Download or read book Chemisorption and Reactivity on Supported Clusters and Thin Films written by R.M. Lambert and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous catalysis provides the backbone of the world's chemical and oil industries. The innate complexity of practical catalytic systems suggests that useful progress should be achievable by investigating key aspects of catalysis by experimental studies on idealised model systems. Thin films and supported clusters are two promising types of model system that can be used for this purpose, since they mimic important aspects of the properties of practical dispersed catalysts. Similarly, appropriate theoretical studies of chemisorption and surface reaction clusters or extended slab systems can provide valuable information on the factors that underlie bonding and catalytic activity. This volume describes such experimental and theoretical approaches to the surface chemistry and catalytic behaviour of metals, metal oxides and metal/metal oxide systems. An introduction to the principles and main themes of heterogeneous catalysis is followed by detailed accounts of the application of modern experimental and theoretical techniques to fundamental problems. The application of advanced experimental methods is complemented by a full description of theoretical procedures, including Hartree-Fock, density functional and similar techniques. The relative merits of the various approaches are considered and directions for future progress are indicated.
Download or read book Fundamentals of Interface and Colloid Science written by J. Lyklema and published by Elsevier. This book was released on 1995-10-17 with total page 787 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interface and colloid science is an important, though often under-valued, branch of science. It has applications and ramifications in domains as disparate as agriculture, mineral dressing, oil recovery, chemical industry, biotechnology, medical science, and many more. Proper application of interface and colloid science requires factual knowledge and insight into the many basic laws of physics and chemistry upon which it is based. Fundamentals of Interface and Colloid Science is the first book to cover this field in the depth neccessary to be a valuable reference and an excellent textbook.From the beginning to the end of the book, systems of growing complexity are treated gradually. The presentation is particularly suited to emphasize that interfaces are not autonomous phases. As a rule, interfacial properties can be varied only by changing the adjoining phases, so that the properties of these bulk phases must be understood first. The text also recognizes common principles behind a variety of phenomena, and helps the reader to understand them and to develop and improve processes. The systematic treatment of the material in the book makes this clear, and makes the text itself an important contribution to the field. - Systematic treatment of information - An excellent addition to volume I - Two chapters contributed by other experts in the field - Uses a deductive approach to increase the order of complexity - Written by a leading expert in the field - Two chapters contributed by other outstanding scientists - Uses a systematic and deductive approach - First comprehensive review of the topic
Download or read book Semiconductor Surfaces and Interfaces written by Winfried Mönch and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Surfaces and Interfaces deals with structural and electronic properties of semiconductor surfaces and interfaces. The first part introduces the general aspects of space-charge layers, of clean-surface and adatom-included surfaces states, and of interface states. It is followed by a presentation of experimental results on clean and adatom-covered surfaces which are explained in terms of simple physical and chemical concepts and models. Where available, results of more refined calculations are considered. A final chapter is devoted to the band lineup at semiconductor interfaces.
Download or read book Surface Analysis Methods in Materials Science written by John O'Connor and published by Springer Science & Business Media. This book was released on 2003-04-23 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide to the use of surface analysis techniques, now in its second edition, has expanded to include more techniques, current applications and updated references. It outlines the application of surface analysis techniques to a broad range of studies in materials science and engineering. The book consists of three parts: an extensive introduction to the concepts of surface structure and composition, a techniques section describing 19 techniques and a section on applications. This book is aimed at industrial scientists and engineers in research and development. The level and content of this book make it ideal as a course text for senior undergraduate and postgraduate students in materials science, materials engineering, physics, chemistry and metallurgy.
Download or read book Giant Magneto Resistance Devices written by E. Hirota and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is one of the first application-orientated books on the subject. The main topics are magnetic sensors with high resolutions and magnetic read heads with high sensitivities, required for hard-disk drives with recording densities of several gigabytes. Another important subject is novel magnetic random-access memory (MRAM) with non-volatile non-destructive and radiation-hard characteristics.
Download or read book Surface Science written by R.J. MacDonald and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern technologies increasingly rely on low-dimensional physics at interfaces and in thin-films and nano-structures. Surface science holds a key position in providing the experimental methods and theoretical models for a basic understanding of these effects. This book includes case studies and status reports about research topics such as: surface structure determination by tensor-LEED and surface X-ray diffraction; the preparation and detection of low-dimensional electronic surface states; quantitative surface compositional analysis; the dynamics of adsorption and reaction of adsorbates, e.g. kinetic oscillations; the characterization and control of thin-film and multilayer growth including the influence of surfactants; a critical assessment of the surface physics approach to heterogeneous catalysis.
Download or read book Applications of Synchrotron Radiation written by Wolfgang Eberhardt and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This field has now matured from being an exotic experimental field into a well-established area of science. The spectroscopy of molecules and molecular adsorbates on surfaces is one area of science where synchrotron-radiation-related studies had made an impact on understanding the ground-state properties as well as the dynamics. With the new high-brightness synchrotron-radiation sources ahead, this will certainly continue to be a field of very active research.
Download or read book Thin Films written by W. K. Liu and published by World Scientific. This book was released on 1999 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heteroepitaxial films are commonplace among today's electronic and photonic devices. The realization of new and better devices relies on the refinement of epitaxial techniques and improved understanding of the physics underlying epitaxial growth. This book provides an up-to-date report on a wide range of materials systems. The first half reviews metallic and dielectric thin films, including chapters on metals, rare earths, metal-oxide layers, fluorides, and high-c superconductors. The second half covers semiconductor systems, reviewing developments in group-IV, arsenide, phosphide, antimonide, nitride, II-VI and IV-VI heteroepitaxy. Topics important to several systems are covered in chapters on atomic processes, ordering and growth dynamics.
Download or read book Progress in Transmission Electron Microscopy 1 written by Xiao-Feng Zhang and published by Springer Science & Business Media. This book was released on 2001-10-18 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transmission electron microscopy (TEM) is now recognized as a crucial tool in materials science. This book, authored by a team of expert Chinese and international authors, covers many aspects of modern electron microscopy, from the architecture of novel electron microscopes, advanced theories and techniques in TEM and sample preparation, to a variety of hands-on examples of TEM applications. Volume I concentrates on the newly developed concepts and methods which are making TEM a powerful and indispensible tool in materials science.
Download or read book Progress in Transmission Electron Microscopy 2 written by Xiao-Feng Zhang and published by Springer Science & Business Media. This book was released on 2001-10-18 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transmission electron microscopy (TEM) is now recognized as a crucial tool in materials science. This book, authored by a team of expert Chinese and international authors, covers many aspects of modern electron microscopy, from the architecture of novel electron microscopes, advanced theories and techniques in TEM and sample preparation, to a variety of hands-on examples of TEM applications. Volume 2 illustrates the important role that TEM is playing in the development and characterization of advanced materials, including nanostructures, interfacial structures, defects, and macromolecular complexes.
Download or read book NEXAFS Spectroscopy written by Joachim Stöhr and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first ever comprehensive treatment of NEXAFS spectroscopy. It is suitable for novice researchers as an introduction to the field, while experts will welcome the detailed description of state-of-the-art instrumentation and analysis techniques, along with the latest experimental and theoretical results.
Download or read book Islands Mounds and Atoms written by Thomas Michely and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystal growth far from thermodynamic equilibrium is nothing but homoepitaxy - thin film growth on a crystalline substrate of the same material. Because of the absence of misfit effects, homoepitaxy is an ideal playground to study growth kinetics in its pure form. Despite its conceptual simplicity, homoepitaxy gives rise to a wide range of patterns. This book explains the formation of such patterns in terms of elementary atomic processes, using the well-studied Pt/Pt(111) system as a reference point and a large number of Scanning Tunneling Microscopy images for visualization. Topics include surface diffusion, nucleation theory, island shapes, mound formation and coarsening, and layer-by-layer growth. A separate chapter is dedicated to describing the main experimental and theoretical methods.
Download or read book Electronic Properties of Semiconductor Interfaces written by Winfried Mönch and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using the continuum of interface-induced gap states (IFIGS) as a unifying theme, Mönch explains the band-structure lineup at all types of semiconductor interfaces. These intrinsic IFIGS are the wave-function tails of electron states, which overlap a semiconductor band-gap exactly at the interface, so they originate from the quantum-mechanical tunnel effect. He shows that a more chemical view relates the IFIGS to the partial ionic character of the covalent interface-bonds and that the charge transfer across the interface may be modeled by generalizing Pauling?s electronegativity concept. The IFIGS-and-electronegativity theory is used to quantitatively explain the barrier heights and band offsets of well-characterized Schottky contacts and semiconductor heterostructures, respectively.
