Download or read book Adsorption Fundamental Processes and Applications written by Mehrorang Ghaedi and published by Academic Press. This book was released on 2021-03-19 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption: Fundamental Processes and Applications, Volume 33 in the Interface Science and Technology Series, discusses the great technological importance of adsorption and describes how adsorbents are used on a large scale as desiccants, catalysts, catalyst supports, in the separation of gases, the purification of liquids, pollution control, and in respiratory protection. Finally, it explores how adsorption phenomena play a vital role in many solid-state reactions and biological mechanisms, as well as stressing the importance of the widespread use of adsorption techniques in the characterization of surface properties and the texture of fine powders. Covers the fundamental aspects of adsorption process engineering Reviews the environmental impact of key aquatic pollutants Discusses and analyzes the importance of adsorption processes for water treatment Highlights opportunity areas for adsorption process intensification Edited by a world-leading researcher in interface science

Download or read book Adsorbents written by Ralph T. Yang and published by John Wiley & Sons. This book was released on 2003-08-01 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption promises to play an integral role in several future energy and environmental technologies, including hydrogen storage, CO removal for fuel cell technology, desulfurization of transportation fuels, and technologies for meeting higher standards on air and water pollutants. Ralph Yang's Adsorbents provides a single and comprehensive source of knowledge for all commercial and new sorbent materials, presenting the fundamental principles for their syntheses, their adsorption properties, and their present and potential applications for separation and purification. Chapter topics in this authoritative, forward-looking volume include: - Formulas for calculating the basic forces or potentials for adsorption - Calculation of pore-size distribution from a single adsorption isotherm - Rules for sorbent selection - Fundamental principles for syntheses/preparation, adsorption properties, and applications of commercially available sorbents - Mesoporous molecular sieves and zeolites - ̧-complexation sorbents and their applications - Carbon nanotubes, pillared clays, and polymeric resins Yang covers the explosion in the development of new nanoporous materials thoroughly, as the adsorption properties of some of these materials have remained largely unexplored. The whole of this book benefits from the new adsorbent designs made possible by the increase in desktop computing and molecular simulation, making Adsorbents useful to both practicing laboratories and graduate programs. Ralph Yang's comprehensive study contributes significantly to the resolution of separation and purification problems by adsorption technologies.

Download or read book Combined and Hybrid Adsorbents written by José M. Loureiro and published by Springer Science & Business Media. This book was released on 2006-11-22 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book follows up an Advanced Research Workshop dedicated to the subject of adsorption. It presents an up-to-date review of the latest achievements in the synthesis, characterization and applications of hybrid organic-inorganic materials and of carbon and combined adsorbents. The modeling of the adsorption process, including the simulation of carbon masks used for both civil and military protection purposes is also addressed. Includes applications in environmental, military and post-disaster situations.

Download or read book Gas Separation by Adsorption Processes written by Ralph T. Yang and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas Separation by Adsorption Processes provides a thorough discussion of the advancement in gas adsorption process. The book is comprised of eight chapters that emphasize the fundamentals concept and principles. The text first covers the adsorbents and adsorption isotherms, and then proceeds to detailing the equilibrium adsorption of gas mixtures. Next, the book covers rate processes in adsorbers and adsorber dynamics. The next chapter discusses cyclic gas separation processes, and the remaining two chapters cover pressure-swing adsorption. The book will be of great use to students, researchers, and practitioners of disciplines that involve gas separation processes, such as chemical engineering.

Download or read book Principles of Adsorption and Adsorption Processes written by Douglas M. Ruthven and published by John Wiley & Sons. This book was released on 1984-06-05 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first up-to-date summary and review for the fundamental principles and industrial practice of adsorption separation processes in more than 30 years. Emphasizes the understanding of adsorption column dynamics and the modeling of adsorption systems, as well as fundamental aspects of kinetics and equilibria.

Download or read book Adsorption Ion Exchange and Catalysis written by Stavros G. Poulopoulos and published by Elsevier. This book was released on 2006-08-23 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption, Ion Exchange and Catalysis is essentially a mixture of environmental science and chemical reactor engineering. More specifically, three important heterogeneous processes, namely, adsorption, ion exchange and catalysis, are analysed, from fundamental kinetics to reactor design with emphasis on their environmental applications. In Chapter 1, the subject of air and water pollution is dealt with. Data about pollutants and emission sources are given and the treatment methods are shortly presented. In Chapter 2, the very basics and historical development of adsorption, ion exchange and catalysis are presented as well as their environmental applications. Chapter 3 is devoted to heterogeneous processes and reactor analysis. All types of reactors are described in depth and reactor modelling, hydraulics and mass/heat transfer phenomena are examined for each type of reactor. Chapters 4 and 5 are dedicated to adsorption & ion exchange and catalysis, respectively. The basic principles are presented including kinetics, equilibrium, mass/heat transfer phenomena as well as the analytical solutions of the reactor models presented in Chapter 3. In the sixth chapter, the subject of scale up is approached. The two Annexes at the end of the book contain physical properties of substances of environmental interest as well as unit conversion tables. Finally, nearly all the examples contained are based on real experimental data found in literature with environmental interest. Most of the examples consider all aspects of operation design – kinetics, hydraulics and mass transfer. * Provides basic knowledge of major environmental problems and connects them to chemical engineering

Download or read book Principles of Adsorption and Reaction on Solid Surfaces written by Richard I. Masel and published by John Wiley & Sons. This book was released on 1996-03-22 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Adsorption and Reaction on Solid Surfaces As with other books in the field, Principles of Adsorption and Reaction on Solid Surfaces describes what occurs when gases come in contact with various solid surfaces. But, unlike all the others, it also explains why. While the theory of surface reactions is still under active development, the approach Dr. Richard Masel takes in this book is to outline general principles derived from thermodynamics and reaction rate theory that can be applied to reactions on surfaces, and to indicate ways in which these principles may be applied. The book also provides a comprehensive treatment of the latest quantitative surface modeling techniques with numerous examples of their use in the fields of chemical engineering, physical chemistry, and materials science. A valuable working resource and an excellent graduate-level text, Principles of Adsorption and Reaction on Solid Surfaces provides readers with: * A detailed look at the latest advances in understanding and quantifying reactions on surfaces * In-depth reviews of all crucial background material * 40 solved examples illustrating how the methods apply to catalysis, physical vapor deposition, chemical vapor deposition, electrochemistry, and more * 340 problems and practice exercises * Sample computer programs * Universal plots of many key quantities * Detailed, class-tested derivations to help clarify key results The recent development of quantitative techniques for modeling surface reactions has led to a number of exciting breakthroughs in our understanding of what happens when gases come in contact with solid surfaces. While many books have appeared describing various experimental modeling techniques and the results obtained through their application, until now, there has been no single-volume reference devoted to the fundamental principles governing the processes observed. The first book to focus on governing principles rather than experimental techniques or specific results, Principles of Adsorption and Reaction on Solid Surfaces provides students and professionals with a quantitative treatment of the application of principles derived from the fields of thermodynamics and reaction rate theory to the investigation of gas adsorption and reaction on solid surfaces. Writing for a broad-based audience including, among others, chemical engineers, chemists, and materials scientists, Dr. Richard I. Masel deftly balances basic background in areas such as statistical mechanics and kinetics with more advanced applications in specialized areas. Principles of Adsorption and Reaction on Solid Surfaces was also designed to provide readers an opportunity to quickly familiarize themselves with all of the important quantitative surface modeling techniques now in use. To that end, the author has included all of the key equations involved as well as numerous real-world illustrations and solved examples that help to illustrate how the equations can be applied. He has also provided computer programs along with universal plots that make it easy for readers to apply results to their own problems with little computational effort. Principles of Adsorption and Reaction on Solid Surfaces is a valuable working resource for chemical engineers, physical chemists, and materials scientists, and an excellent text for graduate students in those disciplines.

Download or read book Adsorption Technology in Water Treatment written by Eckhard Worch and published by Walter de Gruyter. This book was released on 2012-08-31 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption processes have played a central role in water treatment for many years but their importance is on the rise with the continuous discoveries of new micropollutants in the water cycle (pharmaceuticals for example). In addition to the classical application in drinking water treatment, other application fields are attracting increasing interest, such as wastewater treatment, groundwater remediation, treatment of landfill leachate, and so on. Based on the author's long-term experience in adsorption research, the scientific monograph treats the theoretical fundamentals of adsorption technology for water treatment from a practical perspective. It presents all the basics needed for experimental adsorption studies as well as for process modelling and adsorber design. Topics discussed in the monograph include: introduction into basic concepts and practical applications of adsorption processes; adsorbents and their characterisation, single and multi-solute adsorption equilibria, adsorption kinetics, adsorption dynamics in fixed-bed adsorbers and fixed-bed adsorber design, regeneration and reactivation of adsorbents, introduction into geosorption processes in bank filtration and groundwater recharge. According to the increasing importance of micropollutants in the water cycle, particular attention is paid to their competitive adsorption in presence of background organic matter. Clear illustrations, extensive literature references and a useful index make this work indispensible for both scientists and technicians involved in water treatment.

Download or read book Gas Adsorption in Metal Organic Frameworks written by T. Grant Glover and published by CRC Press. This book was released on 2018-09-03 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text discusses the synthesis, characterization, and application of metal-organic frameworks (MOFs) for the purpose of adsorbing gases. It provides details on the fundamentals of thermodynamics, mass transfer, and diffusion that are commonly required when evaluating MOF materials for gas separation and storage applications and includes a discussion of molecular simulation tools needed to examine gas adsorption in MOFs. Additionally, the work presents techniques that can be used to characterize MOFs after gas adsorption has occurred and provides guidance on the water stability of these materials. Lastly, applications of MOFs are considered with a discussion of how to measure the gas storage capacity of MOFs, a discussion of how to screen MOFs to for filtration applications, and a discussion of the use of MOFs to perform industrial separations, such as olefin/paraffin separations. Throughout the work, fundamental information, such as a discussion on the calculation of MOF surface area and description of adsorption phenomena in packed-beds, is balanced with a discussion of the results from research literature.

Download or read book Fundamentals of Adsorption written by M Suzuki and published by Elsevier. This book was released on 1993-12-23 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Adsorption contains 2 plenary lectures and 96 selected papers from the IVth International Conference, Kyoto, May, 1992. The topics cover a wide range of studies from fundamentals to applications: characterization of porous adsorbents, molecular simulation, adsorption isotherms, diffusion in adsorbents, breakthrough detection, chromatography, pressure swing operation, etc. Model studies on adsorption, surface characterization, microporosimetry, molecular simulations of equilibrium and diffusion, computer simulation of adsorption beds, and many theoretical studies are also included. Special attention is given to: bulk gas separation and purification, solvent recovery, bioproduct separation, environmental pollution control, methane storage, adsorption cooling and resources recovery.

Download or read book Heterogeneous Catalysis written by J. R. H. Ross and published by Elsevier. This book was released on 2011-11-07 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Julian R.H. Ross

Download or read book Adsorption Processes for Water Treatment and Purification written by Adrián Bonilla-Petriciolet and published by Springer. This book was released on 2017-07-03 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides researchers and graduate students with an overview of the latest developments in and applications of adsorption processes for water treatment and purification. In particular, it covers current topics in connection with the modeling and design of adsorption processes, and the synthesis and application of cost-effective adsorbents for the removal of relevant aquatic pollutants. The book describes recent advances and alternatives to improve the performance and efficacy of this water purification technique. In addition, selected chapters are devoted to discussing the reliable modeling and analysis of adsorption data, which are relevant for real-life applications to industrial effluents and groundwater. Overall, the book equips readers with a general perspective of the potential that adsorption processes hold for the removal of emerging water pollutants. It can readily be adopted as part of special courses on environmental engineering, adsorption and water treatment for upper undergraduate and graduate students. Furthermore, the book offers a valuable resource for researchers in water production control, as well as for practitioners interested in applying adsorption processes to real-world problems in water treatment and related areas.

Download or read book Intensification of Sorption Processes written by Mahmood Reza Rahimi and published by Elsevier. This book was released on 2021-11-23 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intensification of Sorption Processes: Active and Passive Mechanisms introduces a number of selected, advanced topics in sorption processes/process intensification, covering both theoretical and applicable aspects. The first part of the book is devoted to the study of sorption processes based on active mechanisms, including ultrasonic, microwave, high-gravity, electrical and magnetic fields, while the second part covers passive mechanisms like nanostructures and nanofluids, membrane, supercritical fluids and sorption processes based on geometry design and equipment structure. The focus of the book is on key aspects of novel process intensification technologies (processes and equipment), i.e., absorption and adsorption, working principles, and design and applications. Covers all developments in the field of active and passive mechanisms for sorption processes Introduces basic principles of any intensified sorption process, along with details of equipment Evaluates industrial upscaling, economic evaluation/justification, future opportunities and challenges for each sorption process

Download or read book Activated Carbon for Water and Wastewater Treatment written by Ferhan Cecen and published by John Wiley & Sons. This book was released on 2011-09-19 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph provides comprehensive coverage of technologies which integrate adsorption and biological processes in water and wastewater treatment. The authors provide both an introduction to the topic as well as a detailed discussion of theoretical and practical considerations. After a review of the basics involved in the chemistry, biology and technology of integrated adsorption and biological removal, they discuss the setup of pilot- and full-scale treatment facilities, covering powdered as well as granular activated carbon. They elucidate the factors that influence the successful operation of integrated systems. Their discussion on integrated systems expands from the effects of environmental to the removal of various pollutants, to regeneration of activated carbon, and to the analysis of such systems in mathematical terms. The authors conclude with a look at future needs for research and develoment. A truly valuable resource for environmental engineers, environmental and water chemists, as well as professionals working in water and wastewater treatment.

Download or read book Adsorption Analysis Equilibria And Kinetics With Cd Containing Computer Matlab Programs written by Duong D Do and published by World Scientific. This book was released on 1998-09-22 with total page 915 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers topics of equilibria and kinetics of adsorption in porous media. Fundamental equilibria and kinetics are dealt with for homogeneous as well as heterogeneous particles. Five chapters of the book deal with equilibria and eight chapters deal with kinetics. Single component as well as multicomponent systems are discussed. In kinetics analysis, we deal with the various mass transport processes and their interactions inside a porous particle. Conventional approaches as well as the new approach using Maxwell-Stefan equations are presented. Various methods to measure diffusivity, such as the Differential Adsorption Bed (DAB), the time lag, the diffusion cell, chromatography, and the batch adsorber methods are also covered by the book. It can be used by lecturers and engineers who wish to carry out research in adsorption. A number of programming codes written in MatLab language are included so that readers can use them directly to better understand the behavior of single and multicomponent adsorption systems.

Download or read book Activated Carbon written by Harry Marsh and published by Elsevier. This book was released on 2006-07-12 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have seen an expansion in speciality uses of activated carbons including medicine, filtration, and the purification of liquids and gaseous media. Much of current research and information surrounding the nature and use of activated carbon is scattered throughout various literature, which has created the need for an up-to-date comprehensive and integrated review reference. In this book, special attention is paid to porosities in all forms of carbon, and to the modern-day materials which use activated carbons - including fibres, clothes, felts and monoliths. In addition, the use of activated carbon in its granular and powder forms to facilitate usage in liquid and gaseous media is explored. Activated Carbon will make essential reading for Material Scientists, Chemists and Engineers in academia and industry. Characterization of porosity The surface chemistry of the carbons Methods of activation and mechanisms of adsorptio Computer modelling of structure and porosity within carbons Modern instrumental analytical methods

Download or read book Advanced CO2 Capture Technologies written by Shin-ichi Nakao and published by Springer. This book was released on 2019-05-07 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarises the advanced CO2 capture technologies that can be used to reduce greenhouse gas emissions, especially those from large-scale sources, such as power-generation and steel-making plants. Focusing on the fundamental chemistry and chemical processes, as well as advanced technologies, including absorption and adsorption, it also discusses other aspects of the major CO2 capture methods: membrane separation; the basic chemistry and process for CO2 capture; the development of materials and processes; and practical applications, based on the authors’ R&D experience. This book serves as a valuable reference resource for researchers, teachers and students interested in CO2 problems, providing essential information on how to capture CO2 from various types of gases efficiently. It is also of interest to practitioners and academics, as it discusses the performance of the latest technologies applied in large-scale emission sources.