Download or read book Adjusting Measured Weight Loss of Aged Graphite Fabric PMR 15 Composites written by and published by . This book was released on 1998 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adjusting Measured Weight Loss of Aged Graphite Fabric Pmr 15 Composites written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-30 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purposes of this study were to evaluate the growth of the surface damage layer in polymer matrix composites (PMC's) fabricated with graphite fabric reinforcement and to determine the effects of the cut-surface degradation on the overall thermo-oxidative (TOS) stability of these materials. Four important conclusions were made about the TOS behavior of T650-35/PNIR- 15 fabric-reinforced composites: (1) Three stages of composite weight loss were seen on the plot of weight loss versus aging time; (2) the depth of the cut-edge damage is related to the composite thickness; (3) the actual weight loss realized by a mechanical test specimen that has had all the aging-induced cut-edge damage removed during the preparation process is significantly less than the weight loss measured using specimens with a high percentage of cut edges exposed to the damaging environment; and (4) an extrapolation of a section of the weight loss curve can be used to obtain a more correct estimate of the actual weight loss after extended periods of aging at elevated temperatures. Bowles, Kenneth J. Glenn Research Center RTOP 538-06-15...

Download or read book Failure of Polymer Products Due to Thermo oxidation written by D. C. Wright and published by iSmithers Rapra Publishing. This book was released on 2001 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combined effects of oxidising media and heat result in degradation by thermo-oxidation. The principles and cases described in this review emphasise long term degradation in service. Two additional phenomena that influence thermo-oxidation are also described: catalysis by certain metal ions, and the influence of stress. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.

Download or read book Journal of Advanced Materials written by and published by . This book was released on 1998 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermal and Mechanical Durability of Graphite Fiber Reinforced PMR 15 Composites written by and published by . This book was released on 1997 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Maro Polymer Notes written by and published by . This book was released on 1999 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1999-07 with total page 1154 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Progress in Durability Analysis of Composite Systems written by K.L. Reifsnider and published by CRC Press. This book was released on 1998-01-01 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite material systems are the basis for much of the natural world around us and are rapidly becoming the basis for many modern engineering components. A controlling feature for the general use of such systems is their damage tolerance, durability and reliability. The present book is a comprehensive cross section of the state of the art in the field of the durability of polymer-based, composite, and adhesive systems. As such, it is of special value to researchers concerned with the frontier of the field, to students concerned with the substance of the subject, and to the applied community concerned with the finding methodologies that make it possible to design safe and durable engineering components using material systems.

Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1977 with total page 1160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Manufacturing Processes for Advanced Composites written by Flake C Campbell Jr and published by Elsevier. This book was released on 2003-12-18 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: • One of very few books available to cover this subject area. • A practical book with a wealth of detail.This book covers the major manufacturing processes for polymer matrix composites with an emphasis on continuous fibre-reinforced composites. It covers the major fabrication processes in detail.Very few books cover the details of fabrication and assembly processes for composites. This book is intended for the engineer who wants to learn more about composite processing: any one with some experience in composites should be able to read it. The author, who has 34 years experience in the aerospace industry, has intentionally left out mathematical models for processes so the book will be readable by the general engineer. It differs from other books on composites manufacturing in focussing almost solely on manufacturing processes, while not attempting to cover materials, test methods, mechanical properties and other areas of composites.

Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1991-07 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Composite Materials written by Kamal K. Kar and published by Springer. This book was released on 2016-10-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.

Download or read book Chemistry and Technology of Cyanate Ester Resins written by I. Hamerton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: After epoxy resins and polyimides, cyanate esters arguably form the most well-developed group of high-temperature, thermosetting polymers. They possess a number of desirable performance characteristics which make them of increasing technological importance, where their somewhat higher costs are acceptable. The principal end uses for cyanate esters are as matrix resins for printed wiring board laminates and structural composites. For the electronics markets, the low dielectric loss characteristics, dimen sional stability at molten solder temperatures and excellent adhesion to conductor metals at temperatures up to 250°C, are desirable. In their use in aerospace composites, unmodified cyanate esters offer twice the frac ture toughness of multifunctional epoxies, while achieving a service tem perature intermediate between epoxy and bis-maleimide capabilities. Applications in radome construction and aircraft with reduced radar signatures utilize the unusually low capacitance properties of cyanate esters and associated low dissipation factors. While a number of commercial cyanate ester monomers and prepoly mers are now available, to date there has been no comprehensive review of the chemistry and recent technological applications of this versatile family of resins. The aims of the present text are to present these in a com pact, readable form. The work is primarily aimed at materials scientists and polymer technologists involved in research and development in the chemical, electronics, aerospace and adhesives industries. It is hoped that advanced undergraduates and postgraduates in polymer chemistry and technology, and materials science/technology will find it a useful introduc tion and source of reference in the course of their studies.

Download or read book Residual Stresses in Composite Materials written by Mahmood M. Shokrieh and published by Woodhead Publishing. This book was released on 2014-02-14 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual stresses are a common phenomenon in composite materials. They can either add to or significantly reduce material strength. Because of the increasing demand for high-strength, light-weight materials such as composites and their wide range of applications in the aerospace and automotive industries, in civil infrastructure and in sporting applications, it is critical that the residual stresses of composite materials are understood and measured correctly.The first part of this important book reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses. Various mathematical (analytical and numerical) methods for calculation of residual stresses in composite materials are also presented. Chapters in the first section of the book discuss the simulated hole drilling method, the slitting/crack compliance method, measuring residual stresses in homogeneous and composite glass materials using photoelastic techniques, and modeling residual stresses in composite materials. The second part of the book discusses residual stresses in polymer matrix, metal-matrix and a range of other types of composites. Moreover, the addition of nanoparticles to the matrix of polymeric composites as a new technique for reduction of residual stresses is discussed.Residual stresses in composite materials provides a comprehensive overview of this important topic, and is an invaluable reference text for both academics and professionals working in the mechanical engineering, civil engineering, aerospace, automotive, marine and sporting industries. - Reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses - Discusses residual stresses in polymer matrix, metal-matrix and other types of composite - Considers the addition of nanoparticles to the matrix of polymeric composites as a new technique for reduction of residual stresses

Download or read book Composite Materials written by Krishan K. Chawla and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the relationship between structure and properties, this is a well-balanced treatment of the mechanics and the materials science of composites, while not neglecting the importance of processing. This updated second edition contains new chapters on fatigue and creep of composites, and describes in detail how the various reinforcements, the materials in which they are embedded, and of the interfaces between them, control the properties of the composite materials at both the micro- and macro-levels. Extensive use is made of micrographs and line drawings, and examples of practical applications in various fields are given throughout the book, together with extensive references to the literature. Intended for use in graduate and upper-division undergraduate courses, this book will also prove a useful reference for practising engineers and researchers in industry and academia.