Download or read book Adhesion Measurement of Thin Films Thick Films and Bulk Coatings written by K. L. Mittal and published by ASTM International. This book was released on 1978 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adhesion Measurement of Films and Coatings written by Kash L. Mittal and published by CRC Press. This book was released on 2014-07-30 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the International Symposium on Adhesion Measurement of Films and Coatings, held in Boston. The articles in this book were previously published in three special issues of the Journal of Adhesion Science and Technology. Films and coatings are used for a variety of purposes and their adequate adhesion to the und

Download or read book Adhesion Measurement of Films and Coatings written by K. L. MIttal and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-12-19 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microscopic Aspects of Adhesion and Lubrication written by J.M. Georges and published by Elsevier. This book was released on 1982-04-01 with total page 833 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microscopic Aspects of Adhesion and Lubrication

Download or read book Adhesion Measurement Methods written by Robert Lacombe and published by CRC Press. This book was released on 2005-11-21 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesion Measurement Methods: Theory and Practice provides practical information on the most important measurement techniques, their unique advantages and disadvantages, and the selection of the proper method for a given application. It includes useful information and formulae on adhesion related matters such as driving force formulae for various m

Download or read book Adhesion Measurement of Films Coatings written by K. L. Mittal and published by VSP. This book was released on 2001 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the proceedings of the Second International Symposium on Adhesion Measurement of Films and Coatings, held in Newark, NJ, October 25-27, 1999. Since the First Symposium (Boston 1992) there had been considerable activity in devising new, more reliable and more efficient ways to measure adhesion of films and coatings, which resulted in the decision to organize the Newark Symposium.Films and coatings are used for a variety of purposes – functional, decorative, protective, etc. – in a host of applications. Irrespective of the purpose or application of a film or a coating, their adequate adhesion to the underlying substrates is of paramount importance. Concomitantly, the need to develop techniques for quantitative assessment of adhesion of films and coatings is all too obvious.This volume contains a total of 20 papers, which have all been rigorously peer reviewed and suitably modified before inclusion. The topics include: measurement and analysis of interface adhesion; relative adhesion measurement for thin film structures; adhesion testing of hard coatings by a variety of techniques; challenges and new directions in scratch adhesion testing of coated substrates; application of scratch test to different films and coatings; evaluation of coating-substrate adhesion by indentation experiments; measurement of interfacial fracture energy in multifilm applications; laser induced decohesion spectroscopy (LIDS) for measuring adhesion; pulsed laser technique for assessment of adhesion; blade adhesion test; JKR adhesion test; coefficient of thermal expansion measurement; and residual stresses in diamond films.This volume, providing the latest information, will be of great value and interest to anyone working in the area of adhesion measurement of films and coatings.

Download or read book Thin Films and Coatings written by Sam Zhang and published by CRC Press. This book was released on 2015-07-29 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin Films and Coatings: Toughening and Toughness Characterization captures the latest developments in the toughening of hard coatings and in the measurement of the toughness of thin films and coatings. Featuring chapters contributed by experts from Australia, China, Czech Republic, Poland, Singapore, Spain, and the United Kingdom, this book: Presents the current status of hard-yet-tough ceramic coatings Reviews various toughness evaluation methods for films and hard coatings Explores the toughness and toughening mechanisms of porous thin films and laser-treated surfaces Examines adhesions of the film/substrate interface and the characterization of coating adhesion strength Discusses nanoindentation determination of fracture toughness, resistance to cracking, and sliding contact fracture phenomena Toughening and toughness measurement (of films and coatings) are two related, yet separate, fields of great importance in today’s nanotechnology world. Thin Films and Coatings: Toughening and Toughness Characterization is a timely reference written in such a way that novices will find it a stepping stone to the field and veterans will find it a rich source of information for their research.

Download or read book Progress in Adhesion and Adhesives Volume 2 written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2017-06-23 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the ever-increasing amount of research being published it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in may subjects representing the field of adhesion science and adheisves. Based on the success and the warm reception accorded to the premier volume in this series “Progress in Adhesion and Adhesives” (containing the review articles published in Volume 2 (2014) of the journal Reviews of Adhesion and Adhesives (RAA)), volume 2 comprises 14 review articles published in Volume 4 (2016) of RAA. The subjects of these 14 reviews fall into the following general areas: 1. Surface modification of polymers for a variety of purposes. 2. Adhesion aspects in reinforced composites 3. Thin films/coatings and their adhesion measurement 4. Bioadhesion and bio-implants 5. Adhesives and adhesive joints 6. General adhesion aspects The topics covered include: surface modification of natural fibers for reinforced polymer composites; adhesion of submicrometer thin metals films; surface treatments to modulate bioadhesion; hot-melt adhesives from renewable resources; particulate-polymer composites; functionally graded adhesively bonded joints; fabrication of nano-biodevices; effects of particulates on contact angles , thermal stresses in adhesively bonded joints and ways to mitigate these; laser-assisted electroless metallization of polymer materials; adhesion measurement of coatings on biodevices/implants; cyanoacrylate adhesives; and adhesion of green flame retardant coatings onto polyolefins.

Download or read book Testing of Metallic and Inorganic Coatings written by William B. Harding and published by ASTM International. This book was released on 1987 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coatings are tested to confirm compliance with specifications, to monitor the operation of a coating process, and to evaluate coatings for various services. The ability of a coating to perform as intended usually depends on several characteristics, and the testing of a coating usually involves several different tests. At first glance the nature of a characteristic that is being tested may seem clear and the results of a test may seem to be unambiguous, however, the nature of a characteristic my be more complex than realized and the ability of a test to measure the characteristic may be less than expected. The members of the ASTM Committee B-8 on Metallic and Inorganic Coatings felt it was desirable to organize a symposium on the testing of the metallic and inorganic coatings so as to bring these problems to the attention of practitioners. This publication is based on the symposium, which was presented in Chicago on April 14 and 15, 1986.

Download or read book Adhesion Aspects of Thin Films Volume 1 written by Kash L. Mittal and published by CRC Press. This book was released on 2014-07-30 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the First International Symposium on Adhesion Aspects of Thin Films, held in Newark, New Jersey, October 28-29, 1999. Films and coatings are used for a variety of purposes a decorative, protective, functional, etc. a in a host of applications. Irrespective of the intended function or application of a film

Download or read book Adhesion in Microelectronics written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2014-08-25 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book will provide both fundamental and applied aspects of adhesion pertaining to microelectronics in a single and easily accessible source. Among the topics to be covered include; Various theories or mechanisms of adhesion Surface (physical or chemical) characterization of materials as it pertains to adhesion Surface cleaning as it pertains to adhesion Ways to improve adhesion Unraveling of interfacial interactions using an array of pertinent techniques Characterization of interfaces / interphases Polymer-polymer adhesion Metal-polymer adhesion (metallized polymers) Polymer adhesion to various substrates Adhesion of thin films Adhesion of underfills Adhesion of molding compounds Adhesion of different dielectric materials Delamination and reliability issues in packaged devices Interface mechanics and crack propagation Adhesion measurement of thin films and coatings

Download or read book Handbook of Physical Vapor Deposition PVD Processing written by Donald M. Mattox and published by William Andrew. This book was released on 2010-04-29 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated version of the popular handbook further explains all aspects of physical vapor deposition (PVD) process technology from the characterizing and preparing the substrate material, through deposition processing and film characterization, to post-deposition processing. The emphasis of the new edition remains on the aspects of the process flow that are critical to economical deposition of films that can meet the required performance specifications, with additional information to support the original material. The book covers subjects seldom treated in the literature: substrate characterization, adhesion, cleaning and the processing. The book also covers the widely discussed subjects of vacuum technology and the fundamentals of individual deposition processes. However, the author uniquely relates these topics to the practical issues that arise in PVD processing, such as contamination control and film growth effects, which are also rarely discussed in the literature. In bringing these subjects together in one book, the reader can understand the interrelationship between various aspects of the film deposition processing and the resulting film properties. The author draws upon his long experience with developing PVD processes and troubleshooting the processes in the manufacturing environment, to provide useful hints for not only avoiding problems, but also for solving problems when they arise. He uses actual experiences, called "war stories", to emphasize certain points. Special formatting of the text allows a reader who is already knowledgeable in the subject to scan through a section and find discussions that are of particular interest. The author has tried to make the subject index as useful as possible so that the reader can rapidly go to sections of particular interest. Extensive references allow the reader to pursue subjects in greater detail if desired. The book is intended to be both an introduction for those who are new to the field and a valuable resource to those already in the field. The discussion of transferring technology between R&D and manufacturing provided in Appendix 1, will be of special interest to the manager or engineer responsible for moving a PVD product and process from R&D into production. Appendix 2 has an extensive listing of periodical publications and professional societies that relate to PVD processing. The extensive Glossary of Terms and Acronyms provided in Appendix 3 will be of particular use to students and to those not fully conversant with the terminology of PVD processing or with the English language. - Fully revised and updated to include the latest developments in PVD process technology - 'War stories' drawn from the author's extensive experience emphasize important points in development and manufacturing - Appendices include listings of periodicals and professional societies, terms and acronyms, and material on transferring technology between R&D and manufacturing

Download or read book Surface and Colloid Science in Computer Technology written by Kashmiri Lal Mittal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Medical Coatings and Deposition Technologies written by David Glocker and published by John Wiley & Sons. This book was released on 2016-07-11 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical Coatings and Deposition Technologies is an important new addition to the libraries of medical device designers and manufacturers. Coatings enable the properties of the surface of a device to be controlled independently from the underlying bulk properties; they are often critical to the performance of the device and their use is rapidly growing. This book provides an introduction to many of the most important types of coatings used on modern medical devices as well as descriptions of the techniques by which they are applied and methods for testing their efficacy. Developers of new medical devices and those responsible for producing them will find it an important reference when deciding if a particular functionality can be provided by a coating and what limitations may apply in a given application. Written as a practical guide and containing many specific coating examples and a large number of references for further reading, the book will also be useful to students in materials science & engineering with an interest in medical devices. Chapters on antimicrobial coatings as well as coatings for biocompatibility, drug delivery, radiopacity and hardness are supported by chapters describing key liquid coating processes, plasma-based processes and chemical vapor deposition. Many types of coatings can be applied by more than one technique and the reader will learn the tradeoffs given the relevant design, manufacturing and economic constraints. The chapter on regulatory considerations provides important perspectives regarding the marketing of these coatings and medical devices.

Download or read book Laser Technology written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2018-01-17 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: The acronym Laser is derived from Light Amplification by Stimulated Emission of Radiation. With the advent of the ruby laser in 1960, there has been tremendous research activity in developing novel, more versatile and more efficient laser sources or devices, as lasers applications are ubiquitous. Today, lasers are used in many areas of human endeavor and are routinely employed in a host of diverse fields: various branches of engineering, microelectronics, biomedical, medicine, dentistry, surgery, surface modification, to name just a few. In this book (containing 10 chapters) we have focused on application of lasers in adhesion and related areas. The topics covered include: Topographical modification of polymers and metals by laser ablation to create superhydrophobic surfaces. Non-ablative laser surface modification. Laser surface modification to enhance adhesion. Laser surface engineering of materials to modulate their wetting behavior. Laser surface modification in dentistry. Laser polymer welding. Laser based adhesion testing technique to measure thin film-substrate interface toughness. Laser surface removal of hard thin ceramic coatings. Laser removal of particles from surfaces. Laser induced thin film debonding for micro-device fabrication applications.

Download or read book First International Congress on Adhesion Science And Technology invited Papers written by W. J. Van Ooij and published by VSP. This book was released on 1998-12 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Festschrift documents the Proceedings of the First International Congress on Adhesion Science and Technology, held in honor of Dr. Kash Mittal on the occasion of his 50 birthday, in Amsterdam, The Netherlands, October 16-20, 1995. It contains the full accounts of the plenary and invited lectures, which are divided into the following seven parts: Part 1: Fundamental aspects of adhesion and general topics; Part 2: Contact angle, wettability and surface energetics; Part 3: Surface modification: Relevance to adhesion; Part 4: Adhesives and adhesive joints; Part 5: Adhesion aspects of polymeric coatings, and polymer-polymer interphase; Part 6: Metal-polymer and metal-ceramic adhesion; and Part 7: General papers. The topics covered include many different aspects of adhesion science and technology, and both fundamental and applied issues are addressed. The final section of this volume gives a listing of titles, authors and affiliations of the other 185 papers which were included in the technical program of the conference.

Download or read book First International Congress on Adhesion Science and Technology invited papers written by W.J. van Ooij and published by CRC Press. This book was released on 2023-03-08 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Festschrift documents the Proceedings of the First International Congress on Adhesion Science and Technology, held in honor of Dr. Kash Mittal on the occasion of his 50 birthday, in Amsterdam, The Netherlands, October 16-20, 1995. It contains the full accounts of the plenary and invited lectures, which are divided into the following seven part