EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Adhesion and Cure Kinetics of Photopolymers

Download or read book Adhesion and Cure Kinetics of Photopolymers written by Li Li and published by . This book was released on 1999 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic polymers and composites become increasingly important materials in the biomedical, electrotechnical, and many other industries. Since the ultimate properties of polymeric products depend significantly on their processing, many efforts have been contributed to understanding the fundamental theories as well as their practical application in process design, control, and optimization. This work focuses on thermosetting polymers, especially photopolymers. It contains three relevant parts: dynamic adhesion between a polymer and solid surface, cure kinetics, and rheology during the cure reaction.

Book Progress in Adhesion and Adhesives

Download or read book Progress in Adhesion and Adhesives written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2018-06-25 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the ever-increasing amount of research being published, it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in many subjects representing the field of adhesion science and adhesives. Based on the success of the preceding volumes in this series “Progress in Adhesion and Adhesives”), the present volume comprises 12 review articles published in Volume 5 (2017) of Reviews of Adhesion and Adhesives. The subject of these 12 reviews fall into the following general areas. Nanoparticles in reinforced polymeric composites. Wettability behavior and its modification, including superhydrophobic surfaces. Ways to promote adhesion, including tuber adhesion. Adhesives and adhesive joints Dental adhesion. The topics covered include: Nanoparticles as interphase modifiers in fiber reinforced polymeric composites; fabrication of micro/nano patterns on polymeric substrates to control wettability behavior; plasma processing of aluminum alloys to promote adhesion; UV-curing of adhesives; functionally graded adhesively bonded joints; adhesion between unvulgarized elastomers; electrowetting for digital microfluidics; control of biofilm at the tooth-restoration bonding interface; easy-to-clean superhydrophobic coatings; cyanoacrylates; promotion of resin-dentin bond longevity in adhesive dentistry; and effects of nanoparticles on nanocomposites Mode I and Mode II fractures.

Book Smart Material Systems and MEMS

Download or read book Smart Material Systems and MEMS written by Vijay K. Varadan and published by John Wiley & Sons. This book was released on 2006-11-02 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting unified coverage of the design and modeling of smart micro- and macrosystems, this book addresses fabrication issues and outlines the challenges faced by engineers working with smart sensors in a variety of applications. Part I deals with the fundamental concepts of a typical smart system and its constituent components. Preliminary fabrication and characterization concepts are introduced before design principles are discussed in detail. Part III presents a comprehensive account of the modeling of smart systems, smart sensors and actuators. Part IV builds upon the fundamental concepts to analyze fabrication techniques for silicon-based MEMS in more detail. Practicing engineers will benefit from the detailed assessment of applications in communications technology, aerospace, biomedical and mechanical engineering. The book provides an essential reference or textbook for graduates following a course in smart sensors, actuators and systems.

Book Adhesive Chemistry

    Book Details:
  • Author : Lieng-Huang Lee
  • Publisher : Springer Science & Business Media
  • Release : 2012-12-06
  • ISBN : 1461324351
  • Pages : 847 pages

Download or read book Adhesive Chemistry written by Lieng-Huang Lee and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 847 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first symposium on Recent Advances in Adhesion, held September, 1971 in Washington, D. C. , this Division of the American Chemical Society has continuously sponsored several symposia on adhesion and adhesives. The chemists have gradually realized the importance of adhesion in various fields of science and technology. During these years, the science of adhesion has steadily grown along with progress in surface science and fracture mechanics. Moreover, new adhesives have been invented and applied in actual structures, for example, structural and aerospace adhesives. In response to socio-economic demands, new forms of adhesives have been introduced to combat the problems of pollution and to promote energy-conservation. The developments of hot-melt adhesives, waterborne adhesives, and radiation-curable adhesives are vivid examples of successes in solving some of the problems. As chemists, our hatural desire is to understand how those new adhesives and new forms of adhesives are made. Thus, we are interested in learning about the chemistry of adhesives so that we may create new generations of materials to satisfy future needs. It was based on this common interest that w~ set forth to org'anize this Symposium on Recent Developments in Adhesive Chemistry. It was held from March 21 through 23, 1983 in the Westin Hotel, Seattle, Washington. The Symposium was very well attended. As a matter of fact, for the first two sessions, we had to move from the smaller Mt. St.

Book Dissertation Abstracts International

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2004 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Radiation Curing

    Book Details:
  • Author : S. Peter Pappas
  • Publisher : Springer
  • Release : 1992-05-31
  • ISBN : 0306439999
  • Pages : 448 pages

Download or read book Radiation Curing written by S. Peter Pappas and published by Springer. This book was released on 1992-05-31 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Striking a balance between the scientific and technological aspects of radiation curing, this work includes both a summary of current knowledge as well as many chapters which present the first comprehensive accounts of their subjects.

Book Radiation Technology for Polymers

Download or read book Radiation Technology for Polymers written by Jiri George Drobny and published by CRC Press. This book was released on 2021-04-15 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical book sets the standard as a valuable, time-saving resource offering systematic fundamental information about industrial radiation technologies. This new edition explores updates to emerging applications of ultraviolet (UV) and electron beam (EB) radiation to polymer processing and offers updates throughout to detail changes changes, new trends, and general issues in radiation technology. It presents vital, cutting-edge information to aid further reduction of volatile organic compounds and toxic substances in the environment, develop alternative sources of energy, and harness energy in both medical and industrial applications. New features of this edition include: Stresses the practical aspects of UV/EB technology and its industrial application Includes updates on UV radiation processes and applications of UV radiation Explores new engineering data of selected commercial products Written by an expert with over forty years of experience, this book would make an excellent resource for scientists and engineers in the fields of materials science and polymer chemistry.

Book Additive Manufacturing Technologies

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2014-11-26 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered

Book Bio Based Plant Oil Polymers and Composites

Download or read book Bio Based Plant Oil Polymers and Composites written by Samy Madbouly and published by William Andrew. This book was released on 2015-08-27 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bio-based Plant Oil Polymers and Composites provides engineers and materials scientists a useful framework to help take advantage of the latest research conducted in this rapidly advancing field—enabling them to develop and commercialize their own products quickly and more successfully. Plant oil is one of the most attractive options as a substitute for non-renewable resources in polymers and composites, and is producing materials with very promising thermomechanical properties relative to traditional, petroleum-based polymers. In addition to critical processing and characterization information, the book assists engineers in deciding whether or not they should use a plant oil-based polymer over a petroleum-based polymer, discussing sustainability concerns, biodegradability, associated costs, and recommended applications. The book details the advancements in the development of polymeric materials and composites from plant oils, and provides a critical review of current applications in various fields, including packaging, biomedical, and automotive applications. Also includes the latest progress in developing multifunctional biobased polymers—by increasing thermal conductivity or adding antibacterial properties, for example. Essential coverage of processing, characterization, and the latest research into polymeric materials and composites derived from plant oils (thermoplastics, thermosets, nanocomposites, and fiber reinforced composites) Critically reviews the potential applications of plant oil-based polymers, including sensors, structural parts, medical devices, and automotive interiors Includes the latest developments in multifunctional bio-based polymer composites

Book Reactive Polymers Fundamentals and Applications

Download or read book Reactive Polymers Fundamentals and Applications written by Johannes Karl Fink and published by William Andrew. This book was released on 2005-07-15 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Loaded with practical knowledge, Reactive Polymers Fundamentals and Applications: A Concise Guide to Industrial Polymers comprehensively presents the state-of-art of methods and materials for the formulation of polymeric resins. It is an indispensable tool for chemists, engineers, and manufacturers who use, formulate, and cure raw materials into final products. The text focuses on the chemical modification of properties during the final stage of part fabrication from plastics. Newer applications range from the small scale, such as dental fillings, to industrial processes for batch fabrication. The book covers resin groups in major use in industry and under active research and development.

Book Handbook of Adhesives and Sealants

Download or read book Handbook of Adhesives and Sealants written by Philippe Cognard and published by Elsevier. This book was released on 2006-08-30 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributions from more than 60 authors, each a well-known specialist in their field, have been co-ordinated to produce the most comprehensive Handbook of Adhesives and Sealants ever published. The handbook will be published as 8 volumes, over a period of 4 years and will contain over 2800 pages, rich with case studies, industrial applications and the latest research. It is a work in progress, enabling the latest new and important applications to be included as they happen. Volume 2 of Elsevier’s Handbook of Adhesives & Sealants Series, General knowledge, application of adhesives & new curing techniques, covers the mechanisms of adhesion, its application, and drying and curing techniques. The volume is divided in to the following sections: • Theory of adhesion • Metering and dispensing • Design and calculation of bonded joints• Heat stable adhesives• UV curing • Flexible bonding and sealants Each contributing author is a scientist, practitioner, engineer, or chemist with an abundance of practical experience in their respective field, making this text an authoritative reference source for any materials scientist or engineer, whether in academia or industry.

Book Industrial Photoinitiators

Download or read book Industrial Photoinitiators written by W. Arthur Green and published by CRC Press. This book was released on 2010-04-22 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of photoinitiators in the UV curing process shows remarkable possibilities in myriad applications. Highlighting critical factors such as reactivity, cure speeds, and application details, Industrial Photoinitiators: A Technical Guide is a practical, accessible, industrially oriented text that explains the theory, describes the products, and

Book Radiation Technologies and Applications in Materials Science

Download or read book Radiation Technologies and Applications in Materials Science written by Subhendu Ray Chowdhury and published by CRC Press. This book was released on 2022-12-30 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains various kinds of non-ionizing and high-energy radiations, their interaction with materials and chemical reactions, and conditions of various kinds of materials development technologies including applications. It covers a processing-structure-property relationship and radiations used in developing many advanced materials used in various fields. It highlights application-oriented materials synthesis and modification covering a wide variety of materials such as plastics, rubber, thermo-set, ceramics, and so forth by various radiations. Features: Explains ionizing and non-ionizing radiation-assisted materials development technologies, for polymers, ceramics, metals, and carbons. Covers radiation-assisted synthesis, processing, and modification of all kinds of materials. Provides comparative studies, merits, demerits, and applications very systematically. Criss-crosses polymers science and technology, radiation technology, advanced materials technology, biomaterials technology, and so forth. Includes a section on 3D printing by LASER melting of CoCr alloys. This book is aimed at researchers and graduate students in materials science, radiation chemistry and physics, and polymer and other materials processing.

Book Organic Coatings

    Book Details:
  • Author : Zeno W. Wicks, Jr.
  • Publisher : John Wiley & Sons
  • Release : 2007-03-15
  • ISBN : 0470079061
  • Pages : 748 pages

Download or read book Organic Coatings written by Zeno W. Wicks, Jr. and published by John Wiley & Sons. This book was released on 2007-03-15 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Third Edition brings acclaimed textthoroughly up to date with the latestorganic coatings technology Organic Coatings, Third Edition is an unparalleled reference and text for organic coatings technology and its myriad applications. It begins with discussions of key principles of coatings, then thoroughly explores raw materials, physical concepts, formulations, and applications. Scientists, engineers, and paint formulators all gain a deeper understanding of the principles underlying the technology and learn how to use these principles in the development, production, and application of organic coatings. The four authors, all leading industry experts, offer a unique approach to the topic that correlates the empirical technology of coatings with the underlying science. This Third Edition has been completely revised and updated to reflect numerous changes in the field, including changes driven by increasing pressure to lower VOC emissions, reduce energy requirements, and eliminate potential health hazards from organic coatings components. In addition, the authors have developed new material to make the text more accessible for scientists and engineers first entering the field, as well as for students taking coatings courses. At the same time, the hallmarks that distinguished the two previous editions have been retained, including: Troubleshooting guidance for coatings scientists and technologists Clear differentiation between established principles and hypotheses requiring further research Precise definitions of coatings industry terminology Extensive references to the current literature Hundreds of figures that help readers visualize key concepts and techniques Whether you are just entering the field of organic coatings and need a broad overview or you are an experienced professional who needs a sophisticated reference, you can depend on Organic Coatings to give you the information and answers you need.

Book Handbook of Adhesives and Surface Preparation

Download or read book Handbook of Adhesives and Surface Preparation written by Sina Ebnesajjad and published by William Andrew. This book was released on 2010-12-15 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Adhesives and Surface Preparation provides a thoroughly practical survey of all aspects of adhesives technology from selection and surface preparation to industrial applications and health and environmental factors. The resulting handbook is a hard-working reference for a wide range of engineers and technicians working in the adhesives industry and a variety of industry sectors that make considerable use of adhesives. Particular attention is given to adhesives applications in the automotive, aerospace, medical, dental and electronics sectors. A handbook that truly focuses on the applied aspects of adhesives selection and applications: this is a book that won't gather dust on the shelf Provides practical techniques for rendering materials surfaces adherable Sector-based studies explore the specific issues for automotive and aerospace, medical, dental and electronics

Book Photocured Materials

    Book Details:
  • Author : Atul Tiwari
  • Publisher : Royal Society of Chemistry
  • Release : 2014-11-26
  • ISBN : 178262001X
  • Pages : 384 pages

Download or read book Photocured Materials written by Atul Tiwari and published by Royal Society of Chemistry. This book was released on 2014-11-26 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The materials technologies based on photocuring are gaining momentum, and this will be the first book to provide an in-depth focus on the subject.