Download or read book Adhesion and Adhesives Technology written by Alphonsus V. Pocius and published by Hanser Gardner Publications. This book was released on 2002 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes, in clear, understandable language, the three main disciplines of adhesion technology:
Download or read book Adhesion and Adhesives Technology written by Alphonsus V. Pocius and published by Hanser Gardner Publications. This book was released on 2012 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes, in clear understandable language, the three main disciplines of adhesion technology: mechanics of the adhesive bond, chemistry of adhesives, and surface science. Some knowledge of physical and organic chemistry is assumed, but no familiarity with the science of adhesion is required. The emphasis is on understanding adhesion, how surfaces can be prepared and modified, and how adhesives can be formulated to perform a given task. Throughout the book, the author provides a broad view of the field, with a consistent style that leads the reader from one step to the next in gaining an understanding of the science.
Download or read book Adhesives Technology Handbook written by Sina Ebnesajjad and published by William Andrew. This book was released on 2014-11-26 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a wide range of industrial applications across sectors including medical applications, automotive/aerospace, packaging, electronics, and consumer goods, this book provides a complete guide to the selection of adhesives, methods of use, industrial applications, and the fundamentals of adhesion. Dr Ebnesajjad examines the selection of adhesives and adhesion methods and challenges for all major groups of substrate including plastics (thermosets and thermoplastics), elastomers, metals, ceramics and composite materials. His practical guidance covers joint design and durability, application methods, test methods and troubleshooting techniques. The science and technology of adhesion, and the principles of adhesive bonding are explained in a way that enhances the reader's understanding of the fundamentals that underpin the successful use and design of adhesives. The third edition has been updated throughout to include recent developments in the industry, with new sections covering technological advances such as nanotechnology, micro adhesion systems, and the replacement of toxic chromate technology. Provides practitioners of adhesion technology with a complete guide to bonding materials successfully Covers the whole range of commonly used substrates including plastics, metals, elastomers and ceramics, explaining basic principles and describing common materials and application techniques Introduces the range of commercially available adhesives and the selection process alongside the science and technology of adhesion
Download or read book Adhesion and Adhesives written by Anthony J. Kinloch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade, or so, the growth in the use of adhesives, especially in ever more technically demanding applications, has been rapid and many major developments in the technology of adhesives have been reported. This growth has also led to attention being focused on somewhat more basic studies of the science of adhesion and adhesives, and in recent years our level of fundamental knowledge concerning the formation and mechanical performance of adhesive joints has increased dramatically. Such studies have, of course, been aided greatly by the development of the tools at the disposal of the investigators. For example, specific surface analytical techniques, such as X-ray photoelectron and secondary-ion mass spectroscopy, and the increasingly sophisticated methods of stress analysis and fracture mechanics have been put to good use in furthering our understanding of the science of adhesion and adhesives. The present book attempts to review the multidisciplined subject of adhesion and adhesives, considering both the science and technology involved in the formation and mechanical performance of adhesive joints. The author would like to thank his friends and colleagues for useful discus sions and help in the preparation of this book. I am particularly grateful to P. Cawley, J. Comyn, W. A. Lees, A. C. Roulin-Moloney, W. C. Wake, J. G. Williams and R. J. Young who have read and commented on various chapters and P. Farr for preparing the diagrams.
Download or read book Adhesion and Adhesives Technology written by Alphonsus V. Pocius and published by . This book was released on 2012 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes, in clear understandable language, the three main disciplines of adhesion technology: 1) mechanics of the adhesive bond 2) chemistry of adhesives, and 3) surface science. Some knowledge of physical and organic chemistry is assumed, but no familiarity with the science of adhesion is required. The emphasis is on understanding adhesion, how surfaces can be prepared and modified, and how adhesives can be formulated to perform a given task. Throughout the book, the author provides a broad view of the field, with a consistent style that leads the reader from one step to the next in gaining an understanding of the science.
Download or read book Handbook of Adhesive Technology Revised and Expanded written by Antonio Pizzi and published by CRC Press. This book was released on 2003-08-06 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Adhesive Technology, Second Edition exceeds the ambition of its bestselling forerunner by reexamining the mechanisms driving adhesion, categories of adhesives, techniques for bond formation and evaluation, and major industrial applications. Integrating modern technological innovations into adhesive preparation and application, this greatly expanded and updated edition comprises a total of 26 different adhesive groupings, including three new classes. The second edition features ten new chapters, a 40-page list of resources on adhesives, and abundant figures, tables, equations.
Download or read book Adhesion Science and Engineering written by and published by Elsevier. This book was released on 2002-11-14 with total page 2020 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Mechanics of Adhesion shows that adhesion science and technology is inherently an interdisciplinary field, requiring fundamental understanding of mechanics, surfaces, and materials. This volume comprises 19 chapters. Starting with a background and introduction to stress transfer principles; fracture mechanics and singularities; and an energy approach to debonding, the volume continues with analysis of structural lap and butt joint configurations. It then continues with discussions of test methods for strength and constitutive properties; fracture; peel; coatings, the case of adhesion to a single substrate; elastomeric adhesives such as sealants. The role of mechanics in determining the locus of failure in bonded joints is discussed, followed by a chapter on rheology relevant to adhesives and sealants. Pressure sensitive adhesive performance; the principles of tack and tack measurements; and contact mechanics relevant to wetting and surface energy measurements are then covered. The volume concludes with sections on fibermatrix bonding and reinforcement; durability considerations for adhesive bonds; ultrasonic non-destructive evaluation of adhesive bonds; and design of adhesive bonds from a strength perspective. This book will be of interest to practitioners in the fields of engineering and to those with an interest in adhesion science.
Download or read book Adhesives Technology for Electronic Applications written by James J. Licari and published by William Andrew. This book was released on 2011-06-24 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.512 pagesApprox.512 pages
Download or read book Adhesion Science written by Steven Abbott and published by DEStech Publications, Inc. This book was released on 2015-06-29 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the physics and chemistry of adhesion, surface preparation and testsPresents new strategies for formulating superior strong, weak and pressure-sensitive adhesivesIncludes access to unique electronic apps that enable numerical modeling of adhesives This technical bound book explains the basic principles of adhesion and shows how they are used to formulate and improve adhesives. The volume starts by laying out key physical and chemical concepts underlying adhesion and adhesives, including strong and weak bonds plus pressure-sensitive (PSA) across multiple polymer, metal and ceramic adherends. The ideas are expressed in clear and easily understood mathematical formulas that explain surface properties as well as "good" and "bad" adhesion, with the latter covering multiple types of adhesive failure. In this context, the book presents a detailed explanation of methods to predict, test and formulate adhesives and critically analyzes test results and traditionally accepted rules for adhesive formulation. The eBook version includes online access to a unique set of applied computer programs or "apps" that automate a wide range of adhesive formulas and enable readers to input their own data and numerically model adhesion properties in conjunction with, or prior to, chemical compounding and empirical testing. This volume constitutes a lucid and practical introduction to adhesion and adhesives appropriate for specialists at all levels.
Download or read book Recent Advances in Adhesion Science and Technology in Honor of Dr Kash Mittal written by Wojciech (Voytek) Gutowski and published by CRC Press. This book was released on 2013-12-31 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface of an object is the first thing we see or touch. Nearly every article or object we encounter at home, in industry, land transportation, aerospace, or the medical field in some way uses an adhesive, a sealant, or a decorative coating. Adhesion science provides the technology and the know-how behind these applications. Recent Advances in
Download or read book Adhesive Bonding written by Walter Brockmann and published by John Wiley & Sons. This book was released on 2009-01-07 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both solid knowledge of the basics as well as expert knowledge is needed to create rigid, long-lasting and material-specific adhesions in the industrial or trade sectors. Information that is extremely difficult and time-consuming to find in the current literature. Written by specialists in various disciplines from both academia and industry, this handbook is the very first to provide such comprehensive knowledge in a compact and well-structured form. Alongside such traditional fields as the properties, chemistry and characteristic behavior of adhesives and adhesive joints, it also treats in detail current practical questions and the manifold applications for adhesives.
Download or read book Adhesive Bonding written by Robert D. Adams and published by Elsevier. This book was released on 2005-03-08 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important collection reviews key research on adhesive behaviour and applications in sectors as diverse as construction and automotive engineering. The book is divided into three main parts: fundamentals, mechanical properties and applications. Part one focuses on the basic properties of adhesives, surface assessment and treatment. Part two concentrates on understanding how adhesives perform under stress and the factors affecting fatigue and failure. The final part of the book reviews industry specific applications in areas such as building and construction, transport and electrical engineering.With its distinguished editor and international team of contributors, Adhesive bonding is a standard reference for all those concerned with the industrial application of adhesives. - Essential information for all those concerned with the industrial application of adhesives - This important collection examines adhesives and adhesive bonding for load-bearing applications - Arranged in a user-friendly format with three main sections: fundamentals, generic uses and industry specific applications
Download or read book Surface Treatment in Bonding Technology written by Anna Rudawska and published by Academic Press. This book was released on 2019-04-15 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Treatment in Bonding Technology provides valuable advice on surface treatment methods, modern measuring devices, and the appropriate experimentation techniques that are essential to create strong joints with a reliable service life. The book's focus is on the detailed and up-to-date analysis of surface treatment methods for metallic and polymer substrates. An analysis of factors affecting the surface preparation stage, together with advice on selection, is also provided. Essential theory is combined with experimentation techniques and industry practice to provide a guide that is both practical and academically rigorous. Including a general introduction to bonding, as well as coverage of mechanical, chemical and electrochemical methods, this book is the ideal primer for anyone working with or researching adhesive bonding. - Provides detailed descriptions of surface treatments and their mechanisms that will help readers build a deep understanding of these fundamental techniques - Includes a thorough survey of recent advances in research in surface treatments of metals and polymers - Provides technical advice on experimental testing methods throughout the book
Download or read book Surface Preparation Techniques for Adhesive Bonding written by Raymond F. Wegman and published by William Andrew. This book was released on 2012-12-31 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Preparation Techniques for Adhesive Bonding is an essential guide for materials scientists, mechanical engineers, plastics engineers, scientists and researchers in manufacturing environments making use of adhesives technology. Wegman and van Twisk provide practical coverage of a topic that receives only cursory treatment in more general books on adhesives, making this book essential reading for adhesion specialists, plastics engineers, and a wide range of engineers and scientists working in sectors where adhesion is an important technology, e.g. automotive / aerospace, medical devices, electronics. Wegman and van Twisk provide a wealth of practical information on the processing of substrate surfaces prior to adhesive bonding. The processing of aluminum and its alloys, titanium and its alloys, steels, copper and its alloys, and magnesium are treated in the form of detailed specifications with comparative data. Other metals not requiring extensive treatment are also covered in detail, as are metal matrix and organic matrix composites, thermosets and thermoplastics. This new edition has been updated with coverage of the latest developments in the field including the sol-gel process for aluminum, titanium, and stainless steel, atmospheric plasma treatment for metals, plastics and rubbers and treatments for bronze and nickel alloys. - Updated to include recent technological developments and chemicals currently prescribed for cleaning and surface preparation; a new generation of adhesives technologists can benefit from this classic guide - Enables Materials and Process personnel to select the best process available for their particular application - Practical coverage of a topic that receives only cursory coverage in more general books on adhesives: essential reading for adhesion specialists, plastics engineers, and a wide range of engineers and scientists working in sectors where adhesion is an important technology, e.g. automotive / aerospace, medical devices, electronics
Download or read book Handbook of Adhesion Technology written by Lucas F. M. da Silva and published by Springer. This book was released on 2021-01-14 with total page 1543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesives have been used for thousands of years, but until 100 years ago, the vast majority was from natural products such as bones, skins, fish, milk, and plants. Since about 1900, adhesives based on synthetic polymers have been introduced, and today, there are many industrial uses of adhesives and sealants. It is difficult to imagine a product—in the home, in industry, in transportation, or anywhere else for that matter—that does not use adhesives or sealants in some manner. The Handbook of Adhesion Technology is intended to be the definitive reference in the field of adhesion. Essential information is provided for all those concerned with the adhesion phenomenon. Adhesion is a phenomenon of interest in diverse scientific disciplines and of importance in a wide range of technologies. Therefore, this handbook includes the background science (physics, chemistry and materials science), engineering aspects of adhesion and industry specific applications. It is arranged in a user-friendly format with ten main sections: theory of adhesion, surface treatments, adhesive and sealant materials, testing of adhesive properties, joint design, durability, manufacture, quality control, applications and emerging areas. Each section contains about five chapters written by internationally renowned authors who are authorities in their fields. This book is intended to be a reference for people needing a quick, but authoritative, description of topics in the field of adhesion and the practical use of adhesives and sealants. Scientists and engineers of many different backgrounds who need to have an understanding of various aspects of adhesion technology will find it highly valuable. These will include those working in research or design, as well as others involved with marketing services. Graduate students in materials, processes and manufacturing will also want to consult it.
Download or read book Adhesion Science written by John Comyn and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of adhesives is widespread and growing, and there are few modern artefacts, from the simple cereal packet, to the jumbo jet, that are without this means of joining. Adhesion Science provides an illuminating account of the science underlying the use of adhesives, a branch of chemical technology which is fundamental to the science of coatings and composite materials and to the performance of all types of bonded structures. This book guides the reader through the essential basic polymer science, and the chemistry of adhesives in use at present. It discusses surface preparation for adhesive bonding, and the use of primers and coupling agents. There is a detailed chapter on contact angles and what can be predicted from them. A simple guide on stress distribution joints and how this relates to testing is included. It also examines the interaction of adhesives and the environment, including an analysis of the resistance of joints to water, oxygen and ultra-violet light. Adhesion Science provides a comprehensive introduction to the chemistry of adhesives, and will be of interest not only to chemists, but also to readers with a background in physical or materials science.
Download or read book Handbook of Adhesion written by D. E. Packham and published by John Wiley & Sons. This book was released on 2006-02-08 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of the successful Handbook of Adhesion provides concise and authoritative articles covering many aspects of the science and technology associated with adhesion and adhesives. It is intended to fill a gap between the necessarily simplified treatment of the student textbook and the full and thorough treatment of the research monograph and review article. The articles are structured in such a way, with internal cross-referencing and external literature references, that the reader can build up a broader and deeper understanding, as their needs require. This second edition includes many new articles covering developments which have risen in prominence in the intervening years, such as scanning probe techniques, the surface forces apparatus and the relation between adhesion and fractal surfaces. Advances in understanding polymer - polymer interdiffusion are reflected in articles drawing out the implications for adhesive bonding. In addition, articles derived from the earlier edition have been revised and updated where needed. Throughout the book there is a renewed emphasis on environmental implications of the use of adhesives and sealants. The scope of the Handbook, which features nearly 250 articles from over 60 authors, includes the background science - physics, chemistry and material science - and engineering, and also aspects of adhesion relevant to the use of adhesives, including topics such as: Sealants and mastics Paints and coatings Printing and composite materials Welding and autohesion Engineering design The Handbook of Adhesion is intended for scientists and engineers in both academia and industry, requiring an understanding of the various facets of adhesion.
