Download or read book ADEX Optimized Adaptive Controllers and Systems written by Juan M. Martín-Sánchez and published by Springer. This book was released on 2014-11-05 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a simple and didactic account of the developments and practical applications of predictive, adaptive predictive, and optimized adaptive control from a perspective of stability, including the latest methodology of adaptive predictive expert (ADEX) control. ADEX Optimized Adaptive Control Systems is divided into six parts, with exercises and real-time simulations provided for the reader as appropriate. The text begins with the conceptual and intuitive knowledge of the technology and derives the stability conditions to be verified by the driver block and the adaptive mechanism of the optimized adaptive controller to guaranty the desired control performance. The second and third parts present strategic considerations of predictive control and related adaptive systems necessary for the proper design of driver block and adaptive mechanism and thence their technical realization. The authors then proceed to detail the stability theory that supports predictive, adaptive predictive and optimized adaptive control methodologies. Benchmark applications of these methodologies (distillation column and pulp-factory bleaching plant) are treated next with a focus on practical implementation issues. The final part of the book describes ADEX platforms and illustrates their use in the design and implementation of optimized adaptive control systems to three different challenging-to-control industrial processes: waste-water treatment; sulfur recovery; and temperature control of superheated steam in coal-fired power generation. The presentation is completed by a number of appendices containing technical background associated with the main text including a manual for the ADEX COP platform developed by the first author to exploit the capabilities of adaptive predictive control in real plants. ADEX Optimized Adaptive Control Systems provides practicing process control engineers with a multivariable optimal control solution which is adaptive and resistant to perturbation and the effects of noise. Its pedagogical features also facilitate its use as a teaching tool for formal university and Internet-based open-education-type graduate courses in practical optimal adaptive control and for self-study.
Download or read book Adaptive Predictive Control written by Juan Manuel Martín Sánchez and published by Prentice Hall PTR. This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text discusses Adaptive Predictive Control Systems from their concepts to their application to the optimization in the operation of industrial plants. The book will represent the scientific and engineering background to SCAP Optimization Systems, which represent the first and only systematic implementation of Adaptive Predictive Control offered in the industrial market.
Download or read book Neuroinformatics of Large Scale Brain Modelling written by John David Griffiths and published by Frontiers Media SA. This book was released on 2022-11-10 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dictionary of Acronyms and Technical Abbreviations written by Jakob Vlietstra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Dictionary covers information and communication technology (ICT), including hardware and software; information networks, including the Internet and the World Wide Web; automatic control; and ICT-related computer-aided fields. The Dictionary also lists abbreviated names of relevant organizations, conferences, symposia and workshops. This reference is important for all practitioners and users in the areas mentioned above, and those who consult or write technical material. This Second Edition contains 10,000 new entries, for a total of 33,000.
Download or read book Multiple Objective Decision Making Methods and Applications written by C.-L. Hwang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decision making is the process of selecting a possible course of action from all the available alternatives. In almost all such problems the multiplicity of criteria for judging the alternatives is pervasive. That is, for many such problems, the decision maker (OM) wants to attain more than one objective or goal in selecting the course of action while satisfying the constraints dictated by environment, processes, and resources. Another characteristic of these problems is that the objectives are apparently non commensurable. Mathematically, these problems can be represented as: (1. 1 ) subject to: gi(~) ~ 0, ,', . . . ,. ! where ~ is an n dimensional decision variable vector. The problem consists of n decision variables, m constraints and k objectives. Any or all of the functions may be nonlinear. In literature this problem is often referred to as a vector maximum problem (VMP). Traditionally there are two approaches for solving the VMP. One of them is to optimize one of the objectives while appending the other objectives to a constraint set so that the optimal solution would satisfy these objectives at least up to a predetermined level. The problem is given as: Max f. ~) 1 (1. 2) subject to: where at is any acceptable predetermined level for objective t. The other approach is to optimize a super-objective function created by multiplying each 2 objective function with a suitable weight and then by adding them together.
Download or read book Control of Surge in Centrifugal Compressors by Active Magnetic Bearings written by Se Young Yoon and published by Springer Science & Business Media. This book was released on 2012-06-19 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surge Control of Active-magnetic-bearing-suspended Centrifugal Compressors sets out the fundamentals of integrating active magnetic bearing (AMB) rotor suspension technology in compressor systems, and describes how this relatively new bearing technology can be employed in active control of compressor surge initiation. The authors provide a self-contained and comprehensive review of rotordynamics and the fundamentals of AMB technology. The active stabilization of compressor surge employing AMBs in a machine is fully explored, from modeling of instability and controller design, to the implementation and experimental testing of the control algorithm in a specially-constructed, industrial-size centrifugal compression system. The results of these tests demonstrate the great potential of the new surge control method suggested in this text. This book will be useful for engineers in industries that involve turbocompressors and magnetic bearings, as well as for researchers and graduate students in the field of applied control. Whatever their level of experience, engineers working in the fields of turbomachinery, magnetic bearings, rotordynamics and controls will find the material in this book absorbing as all these important aspects of engineering are integrated to create a multi-disciplinary solution to a real-life industrial problem and the book is a suitable introduction to the area for newcomers.
Download or read book Neural Engineering written by Chris Eliasmith and published by MIT Press. This book was released on 2003 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: A synthesis of current approaches to adapting engineering tools to the study of neurobiological systems.
Download or read book The Oxford Handbook of Cognitive Science written by Susan F. Chipman and published by Oxford University Press. This book was released on 2017 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Oxford Handbook of Cognitive Science emphasizes the research and theory most central to modern cognitive science: computational theories of complex human cognition. Additional facets of cognitive science are discussed in the handbook's introductory chapter.
Download or read book Instrumentation Control and Automation in Wastewater Systems written by Gustaf Olsson and published by IWA Publishing. This book was released on 2005-04-30 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation, control and automation (ICA) in wastewater treatment systems is now an established and recognised area of technology in the profession. There are obvious incentives for ICA, not the least from an economic point of view. Plants are also becoming increasingly complex which necessitates automation and control. Instrumentation, Control and Automation in Wastewater Systems summarizes the state-of-the-art of ICA and its application in wastewater treatment systems and focuses on how leading-edge technology is used for better operation. The book is written for: The practising process engineer and the operator, who wishes to get an updated picture of what is possible to implement in terms of ICA; The process designer, who needs to consider the couplings between design and operation; The researcher or the student, who wishes to get the latest technological overview of an increasingly complex field. There is a clear aim to present a practical ICA approach, based on a technical and economic platform. The economic benefit of different control and operation possibilities is quantified. The more qualitative benefits, such as better process understanding and more challenging work for the operator are also described. Several full-scale experiences of how ICA has improved economy, ease of operation and robustness of plant operation are presented. The book emphasizes both unit process control and plant wide operation. Scientific & Technical Report No. 15
Download or read book Fault Diagnosis and Fault Tolerant Control and Guidance for Aerospace Vehicles written by Ali Zolghadri and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace demonstrates the attractive potential of recent developments in control for resolving such issues as flight performance, self protection and extended-life structures. Importantly, the text deals with a number of practically significant considerations: tuning, complexity of design, real-time capability, evaluation of worst-case performance, robustness in harsh environments, and extensibility when development or adaptation is required. Coverage of such issues helps to draw the advanced concepts arising from academic research back towards the technological concerns of industry. Initial coverage of basic definitions and ideas and a literature review gives way to a treatment of electrical flight control system failures: oscillatory failure, runaway, and jamming. Advanced fault detection and diagnosis for linear and linear-parameter-varying systems are described. Lastly recovery strategies appropriate to remaining actuator/sensor/communications resources are developed. The authors exploit experience gained in research collaboration with academic and major industrial partners to validate advanced fault diagnosis and fault-tolerant control techniques with realistic benchmarks or real-world aeronautical and space systems. Consequently, the results presented in Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace, will be of interest in both academic and aerospatial-industrial milieux.
Download or read book Iterative Learning Control written by David H. Owens and published by Springer. This book was released on 2015-10-31 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops a coherent and quite general theoretical approach to algorithm design for iterative learning control based on the use of operator representations and quadratic optimization concepts including the related ideas of inverse model control and gradient-based design. Using detailed examples taken from linear, discrete and continuous-time systems, the author gives the reader access to theories based on either signal or parameter optimization. Although the two approaches are shown to be related in a formal mathematical sense, the text presents them separately as their relevant algorithm design issues are distinct and give rise to different performance capabilities. Together with algorithm design, the text demonstrates the underlying robustness of the paradigm and also includes new control laws that are capable of incorporating input and output constraints, enable the algorithm to reconfigure systematically in order to meet the requirements of different reference and auxiliary signals and also to support new properties such as spectral annihilation. Iterative Learning Control will interest academics and graduate students working in control who will find it a useful reference to the current status of a powerful and increasingly popular method of control. The depth of background theory and links to practical systems will be of use to engineers responsible for precision repetitive processes.
Download or read book Proceedings of the 6th Brazilian Technology Symposium BTSym 20 written by Yuzo Iano and published by Springer Nature. This book was released on 2021-06-14 with total page 1030 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the Proceedings of The 6th Brazilian Technology Symposium (BTSym'20). The book discusses the current technological issues on Systems Engineering, Mathematics and Physical Sciences, such as the Transmission Line, Protein-Modified Mortars, Electromagnetic Properties, Clock Domains, Chebyshev Polynomials, Satellite Control Systems, Hough Transform, Watershed Transform, Blood Smear Images, Toxoplasma Gondi, Operation System Developments, MIMO Systems, Geothermal-Photovoltaic Energy Systems, Mineral Flotation Application, CMOS Techniques, Frameworks Developments, Physiological Parameters Applications, Brain–Computer Interface, Artificial Neural Networks, Computational Vision, Security Applications, FPGA Applications, IoT, Residential Automation, Data Acquisition, Industry 4.0, Cyber-Physical Systems, Digital Image Processing, Patters Recognition, Machine Learning, Photocatalytic Process, Physical–Chemical Analysis, Smoothing Filters, Frequency Synthesizers, Voltage-Controlled Ring Oscillator, Difference Amplifier, Photocatalysis, Photodegradation, current technological issues on Human, Smart and Sustainable Future of Cities, such as the Digital Transformation, Data Science, Hydrothermal Dispatch, Project Knowledge Transfer, Immunization Programs, Efficiency and Predictive Methods, PMBOK Applications, Logistics Process, IoT, Data Acquisition, Industry 4.0, Cyber-Physical Systems, Fingerspelling Recognition, Cognitive Ergonomics, Ecosystem Services, Environmental, Ecosystem Services Valuation, Solid Waste and University Extension.
Download or read book Introduction to Nature Inspired Optimization written by George Lindfield and published by Academic Press. This book was released on 2017-08-10 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Nature-Inspired Optimization brings together many of the innovative mathematical methods for non-linear optimization that have their origins in the way various species behave in order to optimize their chances of survival. The book describes each method, examines their strengths and weaknesses, and where appropriate, provides the MATLAB code to give practical insight into the detailed structure of these methods and how they work. Nature-inspired algorithms emulate processes that are found in the natural world, spurring interest for optimization. Lindfield/Penny provide concise coverage to all the major algorithms, including genetic algorithms, artificial bee colony algorithms, ant colony optimization and the cuckoo search algorithm, among others. This book provides a quick reference to practicing engineers, researchers and graduate students who work in the field of optimization. - Applies concepts in nature and biology to develop new algorithms for nonlinear optimization - Offers working MATLAB® programs for the major algorithms described, applying them to a range of problems - Provides useful comparative studies of the algorithms, highlighting their strengths and weaknesses - Discusses the current state-of-the-field and indicates possible areas of future development
Download or read book Computational Neurology and Psychiatry written by Péter Érdi and published by Springer. This book was released on 2017-01-25 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest research in computational methods for modeling and simulating brain disorders. In particular, it shows how mathematical models can be used to study the relationship between a given disorder and the specific brain structure associated with that disorder. It also describes the emerging field of computational psychiatry, including the study of pathological behavior due to impaired functional connectivity, pathophysiological activity, and/or aberrant decision-making. Further, it discusses the data analysis techniques that will be required to analyze the increasing amount of data being generated about the brain. Lastly, the book offers some tips on the application of computational models in the field of quantitative systems pharmacology. Mainly written for computational scientists eager to discover new application fields for their model, this book also benefits neurologists and psychiatrists wanting to learn about new methods.
Download or read book Cybersecurity for Industrial Control Systems written by Tyson Macaulay and published by CRC Press. This book was released on 2016-04-19 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: As industrial control systems (ICS), including SCADA, DCS, and other process control networks, become Internet-facing, they expose crucial services to attack. Threats like Duqu, a sophisticated worm found in the wild that appeared to share portions of its code with the Stuxnet worm, emerge with increasing frequency. Explaining how to develop and im
Download or read book Dynamics and Control of Mechanical Systems in Offshore Engineering written by Wei He and published by Springer Science & Business Media. This book was released on 2013-10-02 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics and Control of Mechanical Systems in Offshore Engineering is a comprehensive treatment of marine mechanical systems (MMS) involved in processes of great importance such as oil drilling and mineral recovery. Ranging from nonlinear dynamic modeling and stability analysis of flexible riser systems, through advanced control design for an installation system with a single rigid payload attached by thrusters, to robust adaptive control for mooring systems, it is an authoritative reference on the dynamics and control of MMS. Readers will gain not only a complete picture of MMS at the system level, but also a better understanding of the technical considerations involved and solutions to problems that commonly arise from dealing with them. The text provides: · a complete framework of dynamical analysis and control design for marine mechanical systems; · new results on the dynamical analysis of riser, mooring and installation systems together with a general modeling method for a class of MMS; · a general method and strategy for realizing the control objectives of marine systems with guaranteed stability the effectiveness of which is illustrated by extensive numerical simulation; and · approximation-based control schemes using neural networks for installation of subsea structures with attached thrusters in the presence of time-varying environmental disturbances and parametric uncertainties. Most of the results presented are analytical with repeatable design algorithms with proven closed-loop stability and performance analysis of the proposed controllers is rigorous and detailed. Dynamics and Control of Mechanical Systems in Offshore Engineering is primarily intended for researchers and engineers in the system and control community, but graduate students studying control and marine engineering will also find it a useful resource as will practitioners working on the design, running or maintenance of offshore platforms.
Download or read book Tires Suspension and Handling written by John C Dixon and published by SAE International. This book was released on 1996-09-01 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides detailed coverage of the theory and practice of vehicle cornering and handling. Much of the material in this book is not available elsewhere, including unique information on suspension analysis, understeer/oversteer, bump steer and roll steer, roll centers, limit handling, and aerodynamics. Each chapter ends with a wide selection of problems, providing an ideal review. This book is an excellent resource for vehicle designers and engineering students who want to better understand and analyze the numerous factors affecting vehicle handling.
