Download or read book Handbook of Polymer Synthesis Characterization and Processing written by Enrique Saldivar-Guerra and published by John Wiley & Sons. This book was released on 2013-02-28 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a broad range of polymer science topics, Handbook of Polymer Synthesis, Characterization, and Processing provides polymer industry professionals and researchers in polymer science and technology with a single, comprehensive handbook summarizing all aspects involved in the polymer production chain. The handbook focuses on industrially important polymers, analytical techniques, and formulation methods, with chapters covering step-growth, radical, and co-polymerization, crosslinking and grafting, reaction engineering, advanced technology applications, including conjugated, dendritic, and nanomaterial polymers and emulsions, and characterization methods, including spectroscopy, light scattering, and microscopy.
Download or read book Additives in Polymers written by Jan C. J. Bart and published by John Wiley & Sons. This book was released on 2005-04-08 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This industrially relevant resource covers all established and emerging analytical methods for the deformulation of polymeric materials, with emphasis on the non-polymeric components. Each technique is evaluated on its technical and industrial merits. Emphasis is on understanding (principles and characteristics) and industrial applicability. Extensively illustrated throughout with over 200 figures, 400 tables, and 3,000 references.
Download or read book Polymer Additives written by Jiri E. Kresta and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever since the beginning of the plastics and rubber industry, it was realized that useful products could be produced only if cer tain additives were incorporated into polymers. With the help of these additives, when physically dispersed in a polymer matrix, it has been possible to improve stability against thermal, oxidative, UV, hydrolytic and biological degradation, mechanical properties, flammability, cost, and processibility of plastics. The enormous growth of the volume of plastics consumed by modern society, and new application areas for plastics, have created a demand for new, better additives and better understanding of their functions in polymer systems. As a result of these trends there is a need for sharing of information on progress achieved in the area of polymer additives among engineers and scientists of the plastics industry and academia. This book is based on expanded and updated papers originally presented at the International Symposium on Polymer Additives, which was held in Las Vegas, Nevada, and was sponsored by the American Chemical Society, Division of Polymeric Materials Science and Engi neering. The book is divided into five parts which cover advances in various areas of polymer additives. The first part is devoted to the progress in understanding of UV degradation and stabilization of various polymers. Oxidation degradation and stabilization of plastic materials is covered in the second part. New developments in the stabilization of PVC are presented in the third part.
Download or read book Additives for Plastics written by Jan Stipek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the most important substances used as additives in the plastics industry to improve the properties of polymer-based materials. Each chapter deals with a particular type of additive based on the type's definition, structure, and classification according to main effects on polymeric materials. The mechanism of the additive efficiency and its effects on basic properties of specific polymers are discussed and a survey of its important qualities and practical applications is given. Each chapter is introduced by a theoretical analysis of the practical and technological importance of the ad ditive. The book is mainly intended for students in technical colleges, polytechnics and universities who are studying plastics technology and macromolecular chemistry as part of their general curriculum and for technologists in industry engaged in development, sales, technical service and production functions, and applications of plastics. An elementary knowledge of chemistry, physical chemistry and polymer science at the technical college level is assumed. Prague and Montreal, December 1982 J. Stepek, H. Daoust Table of Contents Introduction .
Download or read book Additives in Polymers written by Alexandr A. Berlin and published by CRC Press. This book was released on 2016-01-05 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additives are selected depending on the type of polymers to which they will be added or the application for which they will be used. The appropriate selection of additives helps develop value-added plastics with improved durability as well as other advantages. This research book provides a range of modern techniques and new research on the use of a
Download or read book Handbook for the Chemical Analysis of Plastic and Polymer Additives written by Michael Bolgar and published by CRC Press. This book was released on 2015-09-25 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers have undoubtedly changed the world through many products that improve our lives. However, additives used to modify the overall characteristics of these materials may not be fully disclosed or understood. These additives may present possible environmental and health hazards. It is important to monitor consumer products for these compounds u
Download or read book Indirect Food Additives and Polymers written by Victor O. Sheftel and published by CRC Press. This book was released on 2000-03-30 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: More foods are now packaged in containers designed for direct cooking or heating, which encourages movement of substances into the foods. Indirect Food Additives and Polymers: Migration and Toxicology is an impressive review of basic regulatory, toxicological, and other scientific information necessary to identify, characterize, measure, and predict the hazards of nearly 2,000 of the plastic-like materials employed in packaging and identified by the FDA as indirect food additives. It presents the data underlying federal regulations, previously unavailable in one volume, and is a convenient resource for anyone working in the large number of related disciplines.
Download or read book Polymer Modifiers and Additives written by Richard F. Grossman and published by CRC Press. This book was released on 2000-11-08 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Outlines the benefits of using additives-individually or in combination-to modify the properties and processability of pure polymers, and discusses easy-to-understand theory and practical applications for immediate economic and performance improvements."
Download or read book Plastics Additives written by G. Pritchard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.
Download or read book Atlas of Plastics Additives written by Dietrich O. Hummel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must for experts in industry, this book describes the application of vibrational (FTIR, UV, Raman) and mass spectrometries and other instrumental techniques for identification and structure elucidation of plastics additives. Numerous tables and figures compress the state of the art.
Download or read book Additives for Polyolefins written by Michael Tolinski and published by William Andrew. This book was released on 2009-09-22 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the polyolefin additives that are currently important in the plastics industry, alongside new additives of increasing interest, such as nanofillers and environmentally sustainable materials. As much as possible, each chapter emphasizes the performance of the additives in the polymer, and the value each relevant additive brings to polypropylene or polyethylene. Where possible, similar additives are compared by capability and relative cost. With major sections for each additive function, this book provides a highly practical guide for engineers and scientists creating and using polyolefin compounds, who will find in this book a wealth of detail and practical guidance. This unique resource will enable them to make practical decisions about the use of the various additives, fillers, and reinforcements specific to this family of materials. ABOUT THE AUTHOR Michael Tolinski is a freelance writer and a lecturer at the University of Michigan's College of Engineering. He is a frequent contributor to Plastics Engineering and Manufacturing Engineering. Structured to make it easy for the reader to find solutions for specific property requirements Contains a number of short case studies about companies that have used or developed a particular additive to achieve a desired result Covers environmental resistance, mechanical property enhancement, appearance enhancement, processing aids, and other modifications of form and function
Download or read book Additives for Plastics Handbook written by J. Murphy and published by Elsevier. This book was released on 2001-11-22 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both technically and economically, additives form a large and increasingly significant part of the polymer industry, both plastics and elastomers. Since the first edition of this book was published, there have been wide-ranging developments, covering chemistry and formulation of new and more efficient additive systems and the safer use of additives, both by processors in the factory and, in the wider field, as they affect the general public. This new edition follows the successful formula of its predecessor, it provides a comprehensive view of all types of additives, concentrating mainly on their technical aspects (chemistry/formulation, structure, function, main applications) with notes on the commercial background of each. The field has been expanded to include any substance that is added to a polymer to improve its use, so including reinforcing materials (such as glass fibre), carbon black and titanium dioxide. This is a book which has been planned for ease of use and the information is presented in a way which is appropriate to the users' needs.
Download or read book Polymer Additive Analytics written by Jan C. J. Bart and published by Firenze University Press. This book was released on 2006 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Additive Migration from Plastics Into Food written by T. R. Crompton and published by Elsevier. This book was released on 2013-10-22 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Migration from Plastics Into Food examines the intrusion of foreign chemicals into food via additives present in plastics packaging and the toxic hazards they pose to consumers. This book shows how direct contact between the packed commodity and the plastic is likely to result in the transfer of polymer additives, adventitious impurities such as monomers, catalyst remnants, and residual polymerization solvents, and low-molecular-weight polymer fractions from the plastic into the packaged material. This book is comprised of nine chapters and begins with a discussion on the various types of plastics used in food packaging as well as the types of substances present in the plastic that might migrate into the food. Subsequent chapters review world literature on extraction testing and the analysis of extractants. The determination of various types of polymer additives and residual monomers in extractants of liquid foodstuffs and beverages, solid foods, edible oils, and fatty foodstuffs is considered. The final chapter looks at the legal requirements concerning the use of additives in food-grade plastics in various countries. This monograph will be of interest to those in the plastics industry, food and beverage packaging industry, and large retail outlets such as supermarkets, along with medical and public health officials, legislators, environmentalists, and the general public.
Download or read book Plastics Additives Handbook written by Hans Zweifel and published by Hanser Gardner Publications. This book was released on 2009 with total page 1222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics without additives are not viable. Additives are essential to make plastics processable and to assure their end-use properties. The demands on additives have continued to evolve, not only because of changes in processing conditions and production techniques but also because plastics are being used in more demanding applications. This revised and updated edition, described earlier by one reviewer as the "bible" for anyone involved in the chemistry and technology of plastics additives, again provides an excellent overview of the complex science and technology of plastics additives and their industry. It offers guidance for all professionals involved in the development of new thermoplastic resin grades and novel end-use applications.
Download or read book Handbook of Sustainable Polymers for Additive Manufacturing written by Antonio Paesano and published by CRC Press. This book was released on 2022-05-24 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the latest technical information on sustainable materials that are feedstocks for additive manufacturing (AM). Topics covered include an up-to-date and extensive overview of raw materials, their chemistry, and functional properties of their commercial versions; a description of the relevant AM processes, products, applications, advantages, and limitations; prices and market data; and a forecast of sustainable materials used in AM, their properties, and applications in the near future. Data included are relative to current commercial products and are presented in easy-to-read tables and charts. Features Highlights up-to-date information and data of actual commercial materials Offers a broad survey of state-of the-art information Forecasts future materials, applications, and areas of R&D Contains simple language, explains technical terms, and minimizes technical lingo Includes over 200 tables, nearly 200 figures, and more than 1,700 references to technical publications, mostly very recent Handbook of Sustainable Polymers for Additive Manufacturing appeals to a diverse audience of students and academic, technical, and business professionals in the fields of materials science and mechanical, chemical, and manufacturing engineering.
Download or read book NMR Spectra of Polymers and Polymer Additives written by Anita J. Brandolini and published by CRC Press. This book was released on 2000-05-12 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Compiles nearly 400 fully assigned NMR spectra of approximately 300 polymers and polymer additives, representing all major clases of materials: polyolefins, styrenics, acrylates, methacrylates, vinyl polymers, elastomers, polyethers, polyesters, polymides, silicones, cellulosics, polyurethanes, plasticizers, and antioxidants."
