Download or read book Advances in Additive Manufacturing Modeling Systems and 3D Prototyping written by Massimo Di Nicolantonio and published by Springer. This book was released on 2019-06-04 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in digital modeling systems (DMSs) and additive manufacturing (AM) technologies. It covers applications of networked technologies, ubiquitous computing, new materials and hybrid production systems, discussing how they are changing the processes of conception, modeling and production of products and systems of product. The book emphasizes ergonomic and sustainability issues, as well as timely topics such as DMSs and AM in Industry 4.0, DMSs and AM in developing countries, DMSs and AM in extreme environments, thus highlighting future trends and promising scenarios for further developing those technologies. Based on the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, held on July 24-28, 2019, in Washington D.C., USA, the book is intended as source of inspiration for researchers, engineers and stakeholders, and to foster interdisciplinary and international collaborations between them.

Download or read book Additive Manufacturing Modeling Systems and 3D Prototyping written by Emilio Rossi and Massimo Di Nicolantonio and published by AHFE International. This book was released on 2022-07-24 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing, Modeling Systems and 3D Prototyping Proceedings of the 13th International Conference on Applied Human Factors and Ergonomics (AHFE 2022), July 24–28, 2022, New York, USA

Download or read book Advances in Manufacturing Production Management and Process Control written by Waldemar Karwowski and published by Springer. This book was released on 2018-06-26 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in manufacturing and process control, with a special emphasis on digital manufacturing and intelligent technologies for manufacturing and industrial processes control. The human aspect of the developed technologies and products, their interaction with the users, as well as sustainability issues, are covered in detail. Development of new products using 3D printers, rapid prototyping systems, remote fabrication, and other advanced techniques, is described in detail, highlighting the state-of-the-art and current challenges. Other key topics include digital modeling systems and additive manufacturing, together with their applications in a number of fields, e.g in bioengineering/biomedicine, in the aerospace, maritime and military fields or for archeological and historical purposes, such as preserving structures, but not limited to this. The book is based on three AHFE 2018 affiliated conferences i.e. the AHFE 2018 International Conference on Advanced Production Management and Process Control, the AHFE 2018 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE 2018 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, which were held on July 21-25, 2018, in Orlando, Florida, USA.

Download or read book Advances in Manufacturing Production Management and Process Control written by Beata Mrugalska and published by Springer Nature. This book was released on 2020-06-30 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in the broadly defined field of advanced manufacturing and process control. It reports on cutting-edge strategies for sustainable production and product life cycle management, and on a variety of people-centered issues in the design, operation and management of manufacturing systems and processes. Further, it presents digital modeling systems and additive manufacturing technologies, including advanced applications for different purposes, and discusses in detail the implementation of and challenges imposed by 3D printing technologies. Based on three AHFE 2020 Conferences (the AHFE 2020 Virtual Conference on Human Aspects of Advanced Manufacturing, the AHFE 2020 Virtual Conference on Advanced Production Management and Process Control and the AHFE 2020 Virtual Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, the book merges ergonomics research, design applications, and up-to-date analyses of various engineering processes. It brings together experimental studies, theoretical methods and best practices, highlights future trends and suggests directions for further technological developments and the improved integration of technologies and humans in the manufacturing industry.

Download or read book Additive Manufacturing 3D Printing Design written by Dr. Sabrie Soloman and published by Dr. Sabrie Soloman. This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing 3D Printing & Design The 4th Revolution Not ever previously consumer has had a technology where we so easily interpret the concepts into a touchable object with little concern to the machinery or talents available. If “seeing is believing!-” 3D printing technology is the perfect object image to see, touch, and feel! It is the wings to lift the well sought product, after laboring and toiling in several design iterations to bring the novel product to be a successful implementation. Now it is promising to become familiar with the product prototype and physically test it to find the flaws in the design. If a flaw is detected, the designer can easily modify the CAD file and print out a new unit. On Demand Custom Part Additive manufacturing has become a mainstream manufacturing process. It builds up parts by adding materials one layer at a time based on a computerized 3D solid model. It does not require the use of fixtures, cutting tools, coolants, and other auxiliary resources. It allows design optimization and the producing of customized parts on-demand. Its advantages over conventional manufacturing have captivated the imagination of the public, reflected in recent corporate implementations and in many academic publications that call additive manufacturing the “fourth industrial revolution.” Digital Model Layer by Layer 3D additive manufacturing is a process tailored for making three-dimensional objects of varieties of different shapes created from digital models. The objects are produced using an additive process, where successive layers of materials are deposited down in different shapes. The 3D Additive Manufacturing is considered diverse from traditional machining techniques, which depends primarily on the removal of material by cutting or drilling. The removal of material is referred to as a “subtractive process.” In a fast-paced, pressure-filled business atmosphere, it is clear that decreasing delivery by days is exceptionally valuable. Digital Manufacturing 3D printing - additive manufacturing, produces 3D solid items from a digital computer file. The printing occurs in an additive process, where a solid object is generated through the consecutive layering of material. There are an extensive variety of materials to select from countless lists of polymers and metals. The process begins with the generation of a 3D digital file such as CAD file. The 3D digital file is then directed to a 3D printer for printing using a simple print command. Freed of the constraints of traditional factories, additive manufacturing allows designers to produce parts that were previously considered far too complex to make economically. Engineers and Biologists are finding practical applications to use 3D additive manufacturing. It permits novel designs to become matchless rare-products that were not likely with preceding manufacturing methods. It is poised to transform medicine and biology with bio-manufacturing. This technology has the possibility to upsurge the well-being of a nation’s citizens. Additive manufacturing may progress the worldwide resources and energy effectiveness in ground, sea and air. This 3D Printing & Design book will enable you to develop and 3D print your own unique object using myriads of worldwide materials. Galilee Galileo & Isaac Newton Galileo Galilei and Isaac Newton have changed our understanding of not only our own solar system, but also the whole universe through the invention of their telescope. The telescope steered a novel and captivating scientific discipline of “astronomy” —observing and studying the planets, stars, and other objects in the universe. The Nebula, for example, could not be observed prior to the invention of the telescope. No one could have estimated how many planets were in our solar system. Thanks to the technology of the telescope, the knowledge of universe was revealed. Thanks to a simple piece of glass made of silica, and to a simple lens made of glass. Similarly, 3D printing technology is a simple approach to open a flood gate to our Fourth Industrial Revolution. One-off Prototype One-off prototypes can be hideously expensive to produce, but a 3D printer can bring down the cost by a sizable margin. Many consumers goods, mechanical parts, aerospace, automobiles, robots, shoes, fashions, architects' models, dentures, hearing aids, cell biology, now appear in a 3D-printed form for appraisal by engineers, stylists, biologist, and clients before obtaining the final approval. Any changes can be swiftly reprinted in a few hours or overnight, whereas waiting for a new prototype to emerge from a machine shop could take weeks, and sometimes months. Some designers are already printing ready-to-wear shoes, dresses, and prosthetics, from metals, plastic and nylon materials. 3D printing’s utmost advantage is making discrete parts rapidly, autonomous of design complications. That speed delivers rapid reaction on the first prototype, and the capability to modify the design and speedily re-manufacture the part. As an alternative of waiting days or weeks for a CNC-machined prototype, a 3D printer can manufacture the part overnight. Development Cycle The 3D printer provides the additional advantage of removing many overhead manufacturing costs and time-delay by 3D printing parts that withstand a machine shop environment. Several tooling, fixtures, and work-holding jaws may be easily developed and 3D printed without extensive lead time and overhead cost. Its speed and quality shorten the product development cycle, permitting manufacturing aesthetically appealing, and high-performance parts in less than a day. Many instances testify that 3D printers offer substantial flexibility to yield parts with the adequate tensile strength and quality, desired to prosper the technology at a reasonable speed and cost. The rewards of applying 3D printing are substantial, as 3D printing permits product development teams to effortlessly, rapidly, and cost effectively yield models, prototypes, and patterns. Parts can be manufactured in hours or days rather than weeks. Nano-bots 3D additive manufacturing may be the only known method for constructing nanobots, which will overcome the speed disadvantage of 3D additive printing, thereby enabling the technology to be widely deployed in every manufacturing aspect. If millions of nanobots worked together, they might be able to do amazing manufacturing takes. Microscopic Surgery Scientists and researchers constructed teams of nanobots able to perform microscopic surgery inside a patient’s body. Some groups of nanobots have been programmed to build objects by arranging atoms precisely so there would be no waste. Other nanobots might even be designed to build more nanobots to replace ones that wear out! Compared to other areas of science like manufacturing and biology, nanotechnology is a very new area of 3D printing research. Working with microns and nanometers is still a very slow and difficult task. Carbon Fiber Also, material scientists and metallurgists are constantly providing engineers, and manufacturers with new and superior materials to make parts in the most economical and effective means. Carbon-fiber composites, for instance, are replacing steel and aluminum in products ranging from simple mountain bikes to sophisticated airliners. Sometimes the materials are farmed, cultivated and may be grown from biological substances and from micro-organisms that have been genetically engineered for the task of fabricating useful parts. Facing the benefits of the current evolution of 3D printing technology, companies from all parts in the supply chain are experiencing the opportunities and threatens it may bring. First, to traditional logistic companies, 3D printing is causing a decline in the cargo industry, reducing the demand for long-distance transportation such as air, sea and rail freight industries. The logistic companies which did not realize the current evolution may not adapt rapidly enough to the new situation. As every coin has two sides, with 3D Printing, logistics companies could also become able to act as the manufacturers. The ability to produce highly complex designs with powerful computer software and turn them into real objects with 3D printing is creating a new design language. 3D-printed items often have an organic, natural look. “Nature has come up with some very efficient designs, Figure 1.3. Often it is prudent to mimic them,” particularly in medical devices. By incorporating the fine, lattice-like internal structure of natural bone into a metal implant, for instance, the implant can be made lighter than a machined one without any loss of strength. It can integrate more easily with the patient's own bones and be grafted precisely to fit the intended patient. Surgeons printed a new titanium jaw for a woman suffering from a chronic bone infection. 3D additive manufacturing promises sizable savings in material costs. In the aerospace industry, metal parts are often machined from a solid billet of costly high-grade titanium. This constitutes 90% of material that is wasted. However, titanium powder can be used to print parts such as a bracket for an aircraft door or part of a satellite. These can be as strong as a machined part, but use only 10% of the raw material. A Boeing F-18 fighter contains a number of printed parts such as air ducts, reducing part weight by at least 30%. Remote Manufacturing 3D Printers Replicator can scan an object in one place while simultaneously communicating to another machine, locally or globally, developed to build a replica object. For example, urgently needed spares could be produced in remote places without having to ship the original object. Even parts that are no longer available could be replicated by scanning a broken item, repairing it virtually, and then printing a new one. It is likely digital libraries will appear online for parts and products that are no longer available. Just as the emergence of e-books means books may never go out of print, components could always remain available. Service mechanics could have portable 3D printers in their vans and hardware stores could offer part-printing services. DIY Market Some entrepreneurs already have desktop 3D printers at home. Industrial desktop 3D printing machines are creating an entirely new market. This market is made up of hobbyists, do-it-yourself enthusiasts, tinkerers, inventors, researchers, and entrepreneurs. Some 3D-printing systems can be built from kits and use open-source software. Machinists may be replaced someday by software technicians who service production machines. 3D printers would be invaluable in remote areas. Rather than waiting days for the correct tool to be delivered, you could instantly print the tool on the job. Printing Materials However, each method has its own benefits and downsides. Some 3D printer manufacturers consequently offer a choice between powder and polymer for the material from which the object is built. Some manufacturer use standard, off-the-shelf business paper as the build material to produce a durable prototype. Speed, cost of the 3D printer, cost of the printed prototype, and the cost of choice materials and color capabilities are the main considerations in selecting a 3D printing machine. SLA – DLP - FDM – SLS - SLM & EBM The expansive world of 3D printing machines has become a confusing place for beginners and professionals alike. The most well-known 3D printing techniques and types of 3D printing machines are stated below. The 3D printing technology is categorized according to the type of technology utilized. The categories are stated as follows: Stereolithography(SLA) Digital Light Processing(DLP) Fused deposition modeling (FDM) Selective Laser Sintering (SLS) Selective laser melting (SLM) Electronic Beam Melting (EBM) Laminated object manufacturing (LOM) Also, the book provides a detailed guide and optimum implementations to each of the stated 3D printing technology, the basic understanding of its operation, and the similarity as well as the dissimilarity functions of each printer. School Students, University undergraduates, and post graduate students will find the book of immense value to equip them not only with the fundamental in design and implementation but also will encourage them to acquire a system and practice creating their own innovative samples. Furthermore, professionals and educators will be well prepared to use the knowledge and the expertise to practice and advance the technology for the ultimate good of their respective organizations. Global Equal Standing Manufacturers large and small play a significant part in the any country’s economy. The U.S. economy; rendering to the United States Census Bureau, manufacturers are the nation’s fourth-largest employer, and ship several trillions of dollars in goods per annum. It may be a large automotive enterprise manufacturing vehicles or an institution with less than 50 employees. Manufacturers are vital to the country’s global success. However, many societies have misunderstandings about the manufacturing jobs are undesirable jobs and offers low-paying compensations. Other countries may be discouraged to compete against USA. Additive Manufacturing Technology – 3D Printing would level the manufacturing plane field, enabling all countries to globally stand on equal footing. Dr. Sabrie Soloman, Chairman & CEO 3D Printing & Design Not ever previously consumer has had a technology where we so easily interpret the concepts into a touchable object with little concern to the machinery or talents available. 3D Printing Technology builds up parts by adding materials one layer at a time based on a computerized 3D solid model. It allows design optimization and the producing of customized parts on-demand. Its advantages over conventional manufacturing have captivated the imagination of the public, reflected in recent corporate implementations and in many academic publications that call additive manufacturing the “Fourth Industrial Revolution.” 3D Printing produces 3D solid items from a digital computer file. The printing occurs in an additive process, where a solid object is generated through the consecutive layering of material. The process begins with the generation of a 3D digital file such as CAD file. The 3D digital file is then directed to a 3D Printer for printing using a simple print command. Freed of the constraints of traditional factories, additive manufacturing allows designers to produce parts that were previously considered far too complex to make economically. Engineers and Biologists are finding practical applications to use 3D additive manufacturing. It permits novel designs to become matchless rare-products that were not likely with preceding manufacturing methods. 3D Printing Technology is poised to transform medicine and biology with bio-manufacturing, and traditional manufacturing into 3D Printing. This technology has the possibility to upsurge the well-being of a nation’s citizens. Additive manufacturing may progress the worldwide resources and energy effectiveness in “Ground, Sea and Air.” This 3D Printing & Design book will enable you to develop and 3D Print your own unique object using myriads of available worldwide materials. One-off prototypes can be hideously expensive to produce, but a 3D Printer can bring down the cost by a sizable margin. Many consumers goods, mechanical parts, aerospace, automobiles, robots, shoes, fashions, architects' models, dentures, hearing aids, cell biology, now appear in a 3D-printed form for appraisal by engineers, stylists, biologist, and clients before obtaining the final approval. The 3D Printing Technology provides the additional advantage of removing many overhead manufacturing costs and time-delay. The rewards are substantial, as it permits product development teams effortlessly, rapidly and cost effectively yielding models, prototypes, and patterns to be manufactured in hours or days rather than weeks, or months.

Download or read book Modeling and Simulation of Functionalized Materials for Additive Manufacturing and 3D Printing Continuous and Discrete Media written by Tarek I. Zohdi and published by Springer. This book was released on 2017-12-22 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the last decade, several industrialized countries have stressed the importance of advanced manufacturing to their economies. Many of these plans have highlighted the development of additive manufacturing techniques, such as 3D printing which, as of 2018, are still in their infancy. The objective is to develop superior products, produced at lower overall operational costs. For these goals to be realized, a deep understanding of the essential ingredients comprising the materials involved in additive manufacturing is needed. The combination of rigorous material modeling theories, coupled with the dramatic increase of computational power can potentially play a significant role in the analysis, control, and design of many emerging additive manufacturing processes. Specialized materials and the precise design of their properties are key factors in the processes. Specifically, particle-functionalized materials play a central role in this field, in three main regimes: (1) to enhance overall filament-based material properties, by embedding particles within a binder, which is then passed through a heating element and the deposited onto a surface, (2) to “functionalize” inks by adding particles to freely flowing solvents forming a mixture, which is then deposited onto a surface and (3) to directly deposit particles, as dry powders, onto surfaces and then to heat them with a laser, e-beam or other external source, in order to fuse them into place. The goal of these processes is primarily to build surface structures which are extremely difficult to construct using classical manufacturing methods. The objective of this monograph is introduce the readers to basic techniques which can allow them to rapidly develop and analyze particulate-based materials needed in such additive manufacturing processes. This monograph is broken into two main parts: “Continuum Method” (CM) approaches and “Discrete Element Method” (DEM) approaches. The materials associated with methods (1) and (2) are closely related types of continua (particles embedded in a continuous binder) and are treated using continuum approaches. The materials in method (3), which are of a discrete particulate character, are analyzed using discrete element methods.

Download or read book Fused Deposition Modeling Based 3D Printing written by Harshit K. Dave and published by Springer Nature. This book was released on 2021-04-21 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers 3D printing activities by fused deposition modeling process. The two introductory chapters discuss the principle, types of machines and raw materials, process parameters, defects, design variations and simulation methods. Six chapters are devoted to experimental work related to process improvement, mechanical testing and characterization of the process, followed by three chapters on post-processing of 3D printed components and two chapters addressing sustainability concerns. Seven chapters discuss various applications including composites, external medical devices, drug delivery system, orthotic inserts, watertight components and 4D printing using FDM process. Finally, six chapters are dedicated to the study on modeling and optimization of FDM process using computational models, evolutionary algorithms, machine learning, metaheuristic approaches and optimization of layout and tool path.

Download or read book Additive Manufacturing written by Andreas Gebhardt and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2016-03-07 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of additive manufacturing for the direct production of finished products is becoming increasingly important. The method not only reduces the demands on industrial infrastructure, but also opens up new perspectives in terms of decentralized production and customer inclusive individualized production (customization, cyberproduction). Oriented towards the practitioner, in this book the basics of additive manufacturing are presented and the properties and special aspects of industrially available machines are discussed. From the generation of data to the forming method, the complete process chain is shown in a practical light. In particular, the following additive manufacturing technologies are discussed: - Polymerization (e.g., stereolithography) - Sintering and melting (e.g., laser sintering) - Layer laminate method (e.g., laminated object manufacturing, LOM) - Extrusion (e.g., fused deposition modeling, FDM) - 3D printing Applications for the production of models and prototypes (rapid prototyping), tools, tool inserts, and forms (rapid tooling) as well as end products (rapid manufacturing) are covered in detailed chapters with examples. Questions of efficiency are discussed from a strategic point of view, and also from an operational perspective.

Download or read book Additive Manufacturing and 3D Printing Technology written by G. K. Awari and published by CRC Press. This book was released on 2021-02-10 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing and 3D Printing Technology: Principles and Applications consists of the construction and working details of all modern additive manufacturing and 3D-printing technology processes and machines, while also including the fundamentals, for a well-rounded educational experience. The book is written to help the reader understand the fundamentals of the systems. This book provides a selection of additive manufacturing techniques suitable for near-term application with enough technical background to understand the domain, its applicability, and to consider variations to suit technical and organizational constraints. It highlights new innovative 3D-printing systems, presents a view of 4D printing, and promotes a vision of additive manufacturing and applications toward modern manufacturing engineering practices. With the block diagrams, self-explanatory figures, chapter exercises, and photographs of lab-developed prototypes, along with case studies, this new textbook will be useful to students studying courses in Mechanical, Production, Design, Mechatronics, and Electrical Engineering.

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2014-11-26 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.

Download or read book Advances in Manufacturing Production Management and Process Control written by Stefan Trzcielinski and published by Springer Nature. This book was released on 2021-07-03 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a timely snapshot of human factors research and methods fostering a better integration of technologies and humans during the whole manufacturing cycle, giving a special emphasis to the quality and safety of the industrial environment for workers, the efficiency of the manufacturing processes itself, the quality of the final product, and its distribution to and use by the customers. It discusses timely issues relating to the automation of the manufacturing processes, and the challenges imposed by the implementation of industry 4.0, additive manufacturing and 3D printing technologies. Contributions cover a range of industrial sectors, such as the automotive, health and constructions ones, highlighting both organizational and engineering solutions fostering sustainability, globalization, customization, workers’ well-being and consumers’ satisfaction, among other issues. Based on the AHFE 2021 Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, held virtually on 25–29 July, 2021, from USA, this book, which merges ergonomic research and technical know-how in the field of manufacturing and product design, addresses a wide range of engineers, designers and professionals, dealing with the integration of technologies and humans in the factories of the future.

Download or read book 3D Printing written by Andreas Gebhardt and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2018-12-10 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a clear and concise guide to Additive Manufacturing (AM), now a well-established valuable tool for making models and prototypes, and also a manufacturing method for molds and final parts finding applications in industries such as medicine, car manufacturing, and aerospace engineering. The book was designed as a supporting material for special courses on advanced manufacturing technology, and for supplementing the content of traditional manufacturing lessons. This second edition has been updated to account for the recent explosion of availability of small, inexpensive 3D printers for domestic use, as well as new industrial printers for series production that have come onto the market. Contents: • Basics of 3D Printing Technology • Additive Manufacturing Processes/3D Printing • The Additive Manufacturing Process Chain and Machines for Additive Manufacturing • Applications of Additive Manufacturing • Perspectives and Strategies of Additive Manufacturing • Materials and Design • Glossary of Terms, Abbreviations, and Definitions

Download or read book 3d Printing And Additive Manufacturing Principles And Applications Fifth Edition Of Rapid Prototyping written by Chee Kai Chua and published by World Scientific Publishing Company. This book was released on 2016-11-29 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing (AM) technologies are developing impressively and are expected to bring about the next revolution. AM is gradually replacing traditional manufacturing methods in some applications because of its unique properties of customisability and versatility. This book provides a very comprehensive and updated text about different types of AM technologies, their respective advantages, shortcomings and potential applications.3D Printing and Additive Manufacturing: Principles and Applications is a comprehensive textbook that takes readers inside the world of additive manufacturing. This book introduces the different types of AM technologies, categorised by liquid, solid and powder-based AM systems, the common standards, the trends in the field and many more.Easy to understand, this book is a good introduction to anyone interested in obtaining a better understanding of AM. For people working in the industry, this book will provide information on new methods and practices, as well as recent research and development in the field. For professional readers, this book provides a comprehensive guide to distinguish between the different technologies, and will help them make better decisions regarding which technology they should use. For the general public, this book sheds some light on the fast-moving AM field.In this edition, new AM standards (e.g. Standard of Terminology and Classification of AM systems) and format standards will be included, Furthermore, the listing of new machines and systems, materials, and software; as well as new case studies and applications in industries that have recently adopted AM (such as the Marine and Offshore industry) have also been incorporated.

Download or read book The Management of Additive Manufacturing written by Mojtaba Khorram Niaki and published by Springer. This book was released on 2017-12-26 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to additive technology and its application in different business sectors. It explores the fundamental impact additive has on technology, particularly on operations, innovation, supply chains, the environment and customer relations. Subsequently, on the basis of a broad survey of the best technology adopters, it offers advice on how to enhance business value by implementing the technology in different industrial and commercial environments. Additive manufacturing (AM) is a new area of manufacturing that has already brought about phenomenal changes to industry and business models. It affects nearly all aspects of the managerial and organizational thinking that was applied to conventional manufacturing. Currently, the technology is being adopted in manufacturing areas that involve high-value products with complex geometries, and small to medium production volumes. It boosts the productivity of new product development processes by slashing costs, reducing time and promoting creativity and innovativeness. Further, it shrinks supply chains by bringing firms closer to their customers. This unique book offers abundant empirical and practical evidence confirming the value of this new technology.

Download or read book 3D Printing and Its Impact on the Production of Fully Functional Components Emerging Research and Opportunities written by Kocovic, Petar and published by IGI Global. This book was released on 2017-05-30 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing processes have undergone significant developments in recent years. With the application of new technology, the productivity of companies has increased tremendously. 3D Printing and Its Impact on the Production of Fully Functional Components: Emerging Research and Opportunities is an innovative source of scholarly research on the advancements of 3D printing technology in modern manufacturing processes. Highlighting critical perspectives on topics such as industrial applications, 3D modeling, and bioprinting, this publication is ideally designed for professionals, academics, engineers, students, and practitioners interested in the latest trends in additive manufacturing.

Download or read book Design Representations and Processing for Additive Manufacturing written by Marco Attene and published by Morgan & Claypool Publishers. This book was released on 2018-06-22 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: The wide diffusion of 3D printing technologies continuously calls for effective solutions for designing and fabricating objects of increasing complexity. The so called "computational fabrication" pipeline comprises all the steps necessary to turn a design idea into a physical object, and this book describes the most recent advancements in the two fundamental phases along this pipeline: design and process planning. We examine recent systems in the computer graphics community that allow us to take a design idea from conception to a digital model, and classify algorithms that are necessary to turn such a digital model into an appropriate sequence of machining instructions.