Download or read book Additive Manufacturing for the Aerospace Industry written by Francis H. Froes and published by Elsevier. This book was released on 2019-02-15 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a broad range of materials and processes used in additive manufacturing. It is ideal reading for those in academia, government labs, component fabricators, and research institutes, but will also appeal to all sectors of the aerospace industry. - Provides information on a broad range of materials and processes used in additive manufacturing - Presents recent developments in the design and applications of additive manufacturing specific to the aerospace industry - Covers a wide array of materials for use in the additive manufacturing of aerospace parts - Discusses current standards in the area of aerospace AM parts

Download or read book Micro scale Investigation of Salification Process on Additive Manufacturing Polymers by Atomic Force Microscopy written by Jessica T. Schlosser and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Additive Manufacturing Foundation Knowledge For The Beginners written by Sunpreet Singh and published by World Scientific. This book was released on 2020-08-04 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the key fundamental principles, classifications, recent developments, as well as different applications of additive manufacturing technologies. A comprehensive overview of the different classes is given, covering polymer-based, metal-based and ceramic-based systems. Special topics such as bioprinting and 4D printing are also introduced. The authors discuss the technological aspects of additive manufacturing in a very clear and understandable way, delivered with the help of self-illustrating artworks. This book is particularly designed to suit the curriculum requirements of undergraduate and graduate students enrolled in Mechanical Engineering, Material Science, Product Design and Development, Biomedical Engineering, Automobile and Aerospace Engineering, and other closely related domains. Manufacturing professionals working in similar fields may also wish to read it as a refresher and to catch up on recent advances.

Download or read book Springer Handbook of Additive Manufacturing written by Eujin Pei and published by Springer Nature. This book was released on 2023-11-25 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook is the ultimate definitive guide that covers key fundamentals and advanced applications for Additive Manufacturing. The Handbook has been structured into seven sections, comprising of a thorough Introduction to Additive Manufacturing; Design and Data; Processes; Materials; Post-processing, Testing and Inspection; Education and Training; and Applications and Case Study Examples. The general principles and functional relationships are described in each chapter and supplemented with industry use cases. The aim of this book is to help designers, engineers and manufacturers understand the state-of-the-art developments in the field of Additive Manufacturing. Although this book is primarily aimed at students and educators, it will appeal to researchers and industrial professionals working with technology users, machine or component manufacturers to help them make better decisions in the implementation of Additive Manufacturing and its applications.

Download or read book Achivements in Additive Manufacturing written by Mihail Ionescu and published by Trans Tech Publications Ltd. This book was released on 2023-11-23 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer-reviewed papers only

Download or read book Polymer Based Additive Manufacturing written by Jonathan E. Seppala and published by . This book was released on 2020-08-25 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Additive manufacturing (AM) is a potentially disruptive technology, revolutionizing not only traditional industries but generating entirely new ones through rapid innovation, the democratization of manufacturing, and unprecedented freedom of design. Furthermore, the development of AM technologies has practical implications for economic growth, healthcare, national security, space exploration, and sustainability. For military and space agencies, AM offers the possibility to transform the traditional supply chain system through manufacturing at-point-of-demand, recycling, and indigenous sourcing of raw materials. Similarly, these concepts are being leveraged by remote communities across the globe through efforts such as Fab Labs, which provide low-cost access to manufacturing technologies. AM is transforming healthcare in unexpected ways: doctors and patients have access to high-quality physical 3D models generated directly from computerized tomography (CT) scans. These surgical guides have proved invaluable in surgical preparation and patient consent. In the lab, researchers are developing medical devices or implants which mimic the patient's physiology, are pre-loaded with therapeutics, and are replaced with the patient's cells through natural tissue repair pathways. Pushing the limits of resolution, multi-photon technologies, which allow subdiffraction-limited resolution, are revolutionizing the development of micro-optical components. Unfortunately, adoption of AM technologies by industry has been slow; and while there are numerous success stories and commercial adoption is steadily increasing, AM is hampered by weak parts, incomplete certification methods, and empirical materials development. Regulatory and standards bodies are working to update or develop new standards and policies to deal with the unique material and production issues posed by AM. Many of the challenges facing the industry stem from our limited understanding of structure-process-performance relationships. These challenges fall into many categories and require a broad range of skills to address. For the researcher, AM processes offer unique challenges in materials development, metrology, and modeling, as well as opportunities to combine all three. What makes a polymer printable? What process parameters are important? How should parts be tested? These are all active areas of investigation. This book was inspired by the 2017 ACS Symposium "Additive Manufacturing of Structures and Functional Devices: Materials, Methods, Models, and Testing" and is supplemented by additional experts in the polymer AM field. The chapters discuss the technologies, measurement challenges, manufacturing opportunities, and fabrication potentials. We begin with an introduction to polymer additive manufacturing, identifying the measurement needs and technical challenges facing the industry. A chapter reviewing polymer powder bed fusion follows, providing a complete discussion on methods, materials, and applications. The bulk of the book covers thermoplastic material extrusion, with chapters discussing recycling-based feedstocks, composites materials, and multi-physics modeling linking experimentation and theory. Moving from thermoplastics to conductive inks, a chapter on in situ monitoring and control of direct-ink-write provides a clear example of how theory and modern machine vision can be used to create a practical and responsive control system. The last chapter provides a state-of-the-art review of multi-photon printing, discussing methods, materials, and the stunning capabilities of the technique"--

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.

Download or read book Advances in Additive Manufacturing and Metal Joining written by N. Ramesh Babu and published by Springer Nature. This book was released on 2023-05-16 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the 8th International and 29th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2021). It discusses the latest advances in miniature manufacturing, machining of miniature components, surface engineering, nanomaterials, nanotechnology, Industry 4.0, optimization techniques, micro-electric discharge machining, electrochemical micro-machining, thin films, optimization of micro-machining process parameters, machining of nano-composites, characterization using atomic force microscopy, micro-tool fabrications, characterization of nano-composites, surface roughness analysis, tribological performance of surface coated materials and sustainability in manufacturing. The contents of this book are useful for students, researchers and as well as industry professionals in the various fields of mechanical engineering.

Download or read book Laser Additive Manufacturing written by Milan Brandt and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Additive Manufacturing: Materials, Design, Technologies, and Applications provides the latest information on this highly efficient method of layer-based manufacturing using metals, plastics, or composite materials. The technology is particularly suitable for the production of complex components with high precision for a range of industries, including aerospace, automotive, and medical engineering. This book provides a comprehensive review of the technology and its range of applications. Part One looks at materials suitable for laser AM processes, with Part Two discussing design strategies for AM. Parts Three and Four review the most widely-used AM technique, powder bed fusion (PBF) and discuss other AM techniques, such as directed energy deposition, sheet lamination, jetting techniques, extrusion techniques, and vat photopolymerization. The final section explores the range of applications of laser AM. Provides a comprehensive one-volume overview of advances in laser additive manufacturing Presents detailed coverage of the latest techniques used for laser additive manufacturing Reviews both established and emerging areas of application

Download or read book Additive Manufacturing Techniques to Enhance the Performance of Electronics Created on Flexible AndRigid Substrates written by Aamir Hamed Hamad and published by . This book was released on 2020 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Different additive manufacturing (AM) methods including fused deposition modeling (FDM) and piezoelectrical drop on demand (DOD) inkjet printing have been used in printed electronics for easy production, easy integration, better performance, and low cost. These methods have been used in producing everyday smart printed electronics such as conformal antennas (planner and non-planar antennas), sensors, actuators, and solar cells created on flexible and rigid substrates. The performance of printed electronics strongly depends on printing techniques and printing resolution that enhance their electrical and mechanical properties. In this dissertation, 3D and surface printing techniques were used to enhance the performance of printed electronics devices fabricated on rigid and flexible substrates. First, fused deposition modeling (FDM) technique was used to study the effect of 3D printed heterogeneous substrates on radio frequency response of microstrip patch antennas. Microstrip patch antennas created on acrylonitrile butadiene styrene (ABS) substrates that were designed by 3D CAD design software (SOLIDWORKS) with dimension 50mm x 50mm x 5mm and fabricated with different machine infill densities 25%, 50%, and 75% using FDM 3D printer. Then, 3D X-ray microscope was used to measure the actual volume fraction and construct equivalent simulations for series and parallel equivalent dielectrics constant. The patch antennas were tested for resonant frequency using a vector network analyzer (VNA) combined with ANSYS-HFSS simulation that was developed based on the permittivity anisotropy in 3D printed heterogeneous substrates to estimate the bulk permittivity of ABS material and study the effect of varying the dielectric constant in lateral and thickness direction. Also, microstrip patch antenna with dimension 30mm x 25mm, was modeled on polydimethylsiloxane (PDMS) substrate with the same dimension of ABS substrate and analyzed for resonant frequency using Ansoft HFSS and COMSOL Multiphysics software. Then, COMSOL Multi-physics software was used to study the behavior of the microstrip patch antenna under different values of compression and bending loads to check the feasibility of using the microstrip patch antenna as a passive sensor to detect the strain in the structure wirelessly. Second, piezoelectrical drop on demand (DOD) inkjet printing was used to print uniform and even high conductive nanosilver ink on rigid and flexible substrates. For surface printing, Jetlab 4xl was used to print lines of high conductive nanosilver ink (UTDAg) on semicrystalline polyether ether ketone (PEEK) substrate using fly mode printing with burst. Then, optimal bipolar waveform was generated at proper jetting parameters to generate ideal droplet in term of velocity, size, and uniformity. The ideal droplet was ejected at different drop spacing and stage velocity to print uniform and even lines. Physical and adhesion characteristics of the printed lines were performed by optical microscopy, scanning electron microscopy, surface profilometry, and soak tests. Also, the effect of high stage velocity printing on the spread behavior of ejected droplet with different droplet spacing on Kapton substrate was studied by printing lines using two bipolar waveforms. The resistance of printed lines were measured at different curing temperature. Finally, the effect of driving waveforms at different jetting parameters on the size and velocity of generated droplet was investigated using smartink (nanosilver ink) produced by Genes'Ink. A new method was developed to measure the size of the generated droplet and recognize weather the droplet has a spherical or an elliptical shape by using Python programming and the result compared with Aphelion imaging software. Finally, lines printed at three waveform voltages on PEEK and glass substrates.

Download or read book Additive Manufacturing with Novel Materials written by R. Rajasekar and published by John Wiley & Sons. This book was released on 2024-04-02 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: ADDITIVE MANUFACTURING With NOVEL MATERIALS The book explores practically the latest advancements and techniques in 3D and 4D printing using innovative and unconventional materials. This book comprehensively provides insights into various additive manufacturing processes, novel materials, and their properties, as well as the basic knowledge of AM process parameters, post-processing techniques, and their applications. It also explores the fundamental concepts and recent advancements in the development of novel materials for several applications, with special emphasis on platforms like AM techniques for polymers, ceramics, metallic materials, composites, nanomaterials, hydrogels, etc. Specific topics like environmental aspects of 3D printing and advanced 4D printing are also introduced. The technological aspects of AM are discussed in a concise and understandable way, with extensive illustrations. Also covered are the challenges and opportunities that arise from 3D printing with these materials. Audience The book will benefit researchers and industry engineers who work in additive manufacturing, mechanical engineering, 3D/4D printing, and materials science.

Download or read book Additive Manufacturing of Metals written by John O. Milewski and published by Springer. This book was released on 2017-06-28 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This engaging volume presents the exciting new technology of additive manufacturing (AM) of metal objects for a broad audience of academic and industry researchers, manufacturing professionals, undergraduate and graduate students, hobbyists, and artists. Innovative applications ranging from rocket nozzles to custom jewelry to medical implants illustrate a new world of freedom in design and fabrication, creating objects otherwise not possible by conventional means. The author describes the various methods and advanced metals used to create high value components, enabling readers to choose which process is best for them. Of particular interest is how harnessing the power of lasers, electron beams, and electric arcs, as directed by advanced computer models, robots, and 3D printing systems, can create otherwise unattainable objects. A timeline depicting the evolution of metalworking, accelerated by the computer and information age, ties AM metal technology to the rapid evolution of global technology trends. Charts, diagrams, and illustrations complement the text to describe the diverse set of technologies brought together in the AM processing of metal. Extensive listing of terms, definitions, and acronyms provides the reader with a quick reference guide to the language of AM metal processing. The book directs the reader to a wealth of internet sites providing further reading and resources, such as vendors and service providers, to jump start those interested in taking the first steps to establishing AM metal capability on whatever scale. The appendix provides hands-on example exercises for those ready to engage in experiential self-directed learning.

Download or read book Predictive Theoretical and Computational Approaches for Additive Manufacturing written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-12-21 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) methods have great potential for promoting transformative research in many fields across the vast spectrum of engineering and materials science. AM is one of the leading forms of advanced manufacturing which enables direct computer-aided design (CAD) to part production without part-specific tooling. In October 2015 the National Academies of Sciences, Engineering, and Medicine convened a workshop of experts from diverse communities to examine predictive theoretical and computational approaches for various AM technologies. While experimental workshops in AM have been held in the past, this workshop uniquely focused on theoretical and computational approaches and involved areas such as simulation-based engineering and science, integrated computational materials engineering, mechanics, materials science, manufacturing processes, and other specialized areas. This publication summarizes the presentations and discussions from the workshop.

Download or read book Additive Manufacturing of Metals The Technology Materials Design and Production written by Li Yang and published by Springer. This book was released on 2017-05-11 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a unique guide to the three-dimensional (3D) printing of metals. It covers various aspects of additive, subtractive, and joining processes used to form three-dimensional parts with applications ranging from prototyping to production. Examining a variety of manufacturing technologies and their ability to produce both prototypes and functional production-quality parts, the individual chapters address metal components and discuss some of the important research challenges associated with the use of these technologies. As well as exploring the latest technologies currently under development, the book features unique sections on electron beam melting technology, material lifting, and the importance this science has in the engineering context. Presenting unique real-life case studies from industry, this book is also the first to offer the perspective of engineers who work in the field of aerospace and transportation systems, and who design components and manufacturing networks. Written by the leading experts in this field at universities and in industry, it provides a comprehensive textbook for students and an invaluable guide for practitioners

Download or read book Additive Manufacturing Handbook written by Adedeji B. Badiru and published by CRC Press. This book was released on 2017-05-19 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretical and practical interests in additive manufacturing (3D printing) are growing rapidly. Engineers and engineering companies now use 3D printing to make prototypes of products before going for full production. In an educational setting faculty, researchers, and students leverage 3D printing to enhance project-related products. Additive Manufacturing Handbook focuses on product design for the defense industry, which affects virtually every other industry. Thus, the handbook provides a wide range of benefits to all segments of business, industry, and government. Manufacturing has undergone a major advancement and technology shift in recent years.

Download or read book From Additive Manufacturing to 3D 4D Printing 2 written by Jean-Claude André and published by John Wiley & Sons. This book was released on 2017-11-29 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing, which was first invented in France and then applied in the United States, is now 33 years old and represents a market of around 5 billion euros per year, with annual growth of between 20 and 30%. Today, additive manufacturing is experiencing a great amount of innovation in its processes, software, engineering and materials used. Its strength as a process has more recently allowed for the exploration of new niches, ranging from applications at nanometer and decameter scales, to others in mechanics and health. As a result, the limitations of the process have also begun to emerge, which include the quality of the tools, their cost of manufacture, the multi-material aspects, functionalities and surface conditions. Volume 2 of this series presents the current techniques, improvements and limits of additive manufacturing, providing an up-to-date review of this process.

Download or read book 3D Printing and Additive Manufacturing Technologies written by L. Jyothish Kumar and published by Springer. This book was released on 2018-06-07 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of papers on advanced technologies for 3D printing and additive manufacturing, and demonstrates how these technologies have changed the face of direct, digital technologies for the rapid production of models, prototypes and patterns. Because of their wide range of applications, 3D printing and additive manufacturing technologies have sparked a powerful new industrial revolution in the field of manufacturing. The evolution of 3D printing and additive manufacturing technologies has changed design, engineering and manufacturing processes across such diverse industries as consumer products, aerospace, medical devices and automotive engineering. This book will help designers, R&D personnel, and practicing engineers grasp the latest developments in the field of 3D Printing and Additive Manufacturing.