Download or read book Additive Manufacturing for Plastic Recycling written by Rupinder Singh and published by CRC Press. This book was released on 2022-04-26 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and up-to-date discussion of breakthroughs on additive manufacturing for plastic material recycling to boost a circular economy. It offers new ideas of combining/hybridizing processing methods that work as a source of information for manufacturers in making new and strategic product development plans. Additive Manufacturing for Plastic Recycling: Efforts in Boosting a Circular Economy provides a critical, comprehensive, methodological, and strong state-of-the-art work on the processing of thermoplastic and thermosetting along with new directions and applications. It describes the common and hybrid approaches of recycling processes and includes theoretical and practical ideas of combining/hybridizing processing methods with the use of fused deposition modelling, which is one of the low-cost additive manufacturing techniques. The book also discusses mechanical twin-screw extrusion followed by case studies for developing hybrid composite structures for biomedical and structural applications. Recent innovations in melt processing for recycling and the fundaments, process parameters investigations, and applications for new product development are also presented. This book is a first-hand reference source of information for academic scholars and commercial manufacturers for making strategic development plans for new product development.

Download or read book Polymer Based Additive Manufacturing written by Jonathan E. Seppala and published by . This book was released on 2020-08-25 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Additive manufacturing (AM) is a potentially disruptive technology, revolutionizing not only traditional industries but generating entirely new ones through rapid innovation, the democratization of manufacturing, and unprecedented freedom of design. Furthermore, the development of AM technologies has practical implications for economic growth, healthcare, national security, space exploration, and sustainability. For military and space agencies, AM offers the possibility to transform the traditional supply chain system through manufacturing at-point-of-demand, recycling, and indigenous sourcing of raw materials. Similarly, these concepts are being leveraged by remote communities across the globe through efforts such as Fab Labs, which provide low-cost access to manufacturing technologies. AM is transforming healthcare in unexpected ways: doctors and patients have access to high-quality physical 3D models generated directly from computerized tomography (CT) scans. These surgical guides have proved invaluable in surgical preparation and patient consent. In the lab, researchers are developing medical devices or implants which mimic the patient's physiology, are pre-loaded with therapeutics, and are replaced with the patient's cells through natural tissue repair pathways. Pushing the limits of resolution, multi-photon technologies, which allow subdiffraction-limited resolution, are revolutionizing the development of micro-optical components. Unfortunately, adoption of AM technologies by industry has been slow; and while there are numerous success stories and commercial adoption is steadily increasing, AM is hampered by weak parts, incomplete certification methods, and empirical materials development. Regulatory and standards bodies are working to update or develop new standards and policies to deal with the unique material and production issues posed by AM. Many of the challenges facing the industry stem from our limited understanding of structure-process-performance relationships. These challenges fall into many categories and require a broad range of skills to address. For the researcher, AM processes offer unique challenges in materials development, metrology, and modeling, as well as opportunities to combine all three. What makes a polymer printable? What process parameters are important? How should parts be tested? These are all active areas of investigation. This book was inspired by the 2017 ACS Symposium "Additive Manufacturing of Structures and Functional Devices: Materials, Methods, Models, and Testing" and is supplemented by additional experts in the polymer AM field. The chapters discuss the technologies, measurement challenges, manufacturing opportunities, and fabrication potentials. We begin with an introduction to polymer additive manufacturing, identifying the measurement needs and technical challenges facing the industry. A chapter reviewing polymer powder bed fusion follows, providing a complete discussion on methods, materials, and applications. The bulk of the book covers thermoplastic material extrusion, with chapters discussing recycling-based feedstocks, composites materials, and multi-physics modeling linking experimentation and theory. Moving from thermoplastics to conductive inks, a chapter on in situ monitoring and control of direct-ink-write provides a clear example of how theory and modern machine vision can be used to create a practical and responsive control system. The last chapter provides a state-of-the-art review of multi-photon printing, discussing methods, materials, and the stunning capabilities of the technique"--

Download or read book Enhancing Future Skills and Entrepreneurship written by Kuldip Singh Sangwan and published by Springer Nature. This book was released on 2020-07-27 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents the proceedings of the 3rd Indo-German Conference on Sustainability in Engineering held at Birla Institute of Technology and Science, Pilani, India, on September 16–17, 2019. Intended to foster the synergies between research and education, the conference is one of the joint activities of the BITS Pilani and TU Braunschweig conducted under the auspices of Indo-German Center for Sustainable Manufacturing, established in 2009. The book is divided into three sections: engineering, education and entrepreneurship, covering a range of topics, such as renewable energy forecasting, design & simulation, Industry 4.0, and soft & intelligent sensors for energy efficiency. It also includes case studies on lean and green manufacturing, and life cycle analysis of ceramic products, as well as papers on teaching/learning methods based on the use of learning factories to improve students’problem-solving and personal skills. Moreover, the book discusses high-tech ideas to help the large number of unemployed engineering graduates looking for jobs become tech entrepreneurs. Given its broad scope, it will appeal to academics and industry professionals alike.

Download or read book Additive Manufacturing for Plastic Recycling written by Rupinder Singh and published by CRC Press. This book was released on 2022-04-26 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and up-to-date discussion of breakthroughs on additive manufacturing for plastic material recycling to boost a circular economy. It offers new ideas of combining/hybridizing processing methods that work as a source of information for manufacturers in making new and strategic product development plans. Additive Manufacturing for Plastic Recycling: Efforts in Boosting a Circular Economy provides a critical, comprehensive, methodological, and strong state-of-the-art work on the processing of thermoplastic and thermosetting along with new directions and applications. It describes the common and hybrid approaches of recycling processes and includes theoretical and practical ideas of combining/hybridizing processing methods with the use of fused deposition modelling, which is one of the low-cost additive manufacturing techniques. The book also discusses mechanical twin-screw extrusion followed by case studies for developing hybrid composite structures for biomedical and structural applications. Recent innovations in melt processing for recycling and the fundaments, process parameters investigations, and applications for new product development are also presented. This book is a first-hand reference source of information for academic scholars and commercial manufacturers for making strategic development plans for new product development.

Download or read book Plastics Fabrication and Recycling written by Manas Chanda and published by CRC Press. This book was released on 2016-04-19 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Derived from the fourth edition of the well-known Plastics Technology Handbook, Plastics Fabrication and Recycling presents the molding and fabrication processes of plastics as well as several important fe

Download or read book Recycling of Flexible Plastic Packaging written by Michael Niaounakis and published by William Andrew. This book was released on 2019-12-04 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling of Flexible Plastic Packaging presents thorough and detailed information on the management and recycling of flexible plastic packaging, focusing on the latest actual/potential methods and techniques and offering actionable solutions that minimize waste and increase product efficiency and sustainability. Sections cover flexible plastic packaging and its benefits, applications and challenges. This is followed by in-depth coverage of the materials, types and forms of flexible packaging. Other key discussions cover collection and pre-treatment, volume reduction, separation from other materials, chemical recycling, post-processing and reuse, current regulations and policies, economic aspects and immediate trends. This information will be highly valuable to engineers, scientists and R&D professionals across industry. In addition, it will also be of great interest to researchers in academia, those in government, or anyone with an interest in recycling who is looking to further advance and implement recycling methods for flexible plastic packaging. Presents state-of-the-art methods and technologies regarding the processing of flexible plastic packaging waste Addresses the challenges currently associated with both waste management and available recycling methods Opens the door to innovation, supporting improved recycling methods, manufacturing efficiency and industrial sustainability

Download or read book High Performance and Specialty Fibers written by Japan The Society of Fiber Science and Techno and published by Springer. This book was released on 2016-08-16 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the key technologies and characteristics of the modern man-made specialty fibers mainly developed in Japan. Since the production of many low-cost man-made fibers shifted to China and other Asian countries, Japanese companies have focused on production of high-quality, high-performance super fibers as well as highly functionalized fibers so-called ‘Shin-gosen’. ZylonTM and DyneemaTM manufactured by Toyobo, TechnoraTM produced by Teijin, and VectranTM developed by Kuraray are those examples of super fibers. Carbon fibers ToraycaTM from Toray have occupied the most advanced high-performance application area. Various types of polyester fibers having design-shaped cross-sections and special fiber morphologies and those showing specific physico-chemical properties have also been developed to acquire a high-value textile market of the world. This book describes how these high-tech fibers have been developed and what aspects are the most important in each fiber based on its structure-property relationship. Famous specialists both in industry and academia are responsible for the contents, explaining the design concepts and the special technologies for the production of these special fibers. For university teachers and students, this volume is an excellent textbook that elucidates the basic concepts of modern fibers. At the same time, researchers, both in academia and industry, will find a comprehensive overview of recent man-made fibers. This publication, presenting the most easily understandable general survey of specialty man-made fibers to date, is dedicated to the 70th-anniversary of the Society of Fiber Science and Technology, Japan.

Download or read book Design and Manufacturing of Plastics Products written by Antonio Pouzada and published by William Andrew. This book was released on 2021-08-14 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacturing of Plastics Products: Integrating Conventional Methods and Innovative Technologies brings together detailed information on design, materials selection, properties, manufacturing, and the performance of plastic products, incorporating the utilization of the latest novel techniques and additive manufacturing technologies. The book integrates the design of molded products and conventional manufacturing and molding techniques with recent additive manufacturing techniques to produce performant products and cost-effective tools. Key areas of innovation are explained in detail, including hybrid molds, the integration of processing options with product properties and performance, and sustainability factors such as eco-design strategies, recycling, and lifecycle assessment. Other sections cover the development of plastics products, including design methodologies, design solutions specific to plastics, and design for re-use, as well as manufacturing and performance, with an emphasis on thermoplastic molding techniques, recent advances on plastics tooling, and the appraisal of the influence of processing options on product performance. This is a valuable resource to plastics engineers, design engineers, mold makers, and product or part designers across industries. It will also be of interest to researchers and advanced students in plastics engineering, polymer science, additive manufacturing and mechanical engineering. Offers a thorough grounding in plastics part design, thermoplastic material selection, properties, manufacture and performance of plastic parts Presents the latest advances, including the integration of additive manufacturing in the plastics product development cycle, hybrid molds, and lifecycle and recycling considerations Enables the reader to utilize traditional methods alongside cutting-edge technologies in the production of performant plastic products and parts

Download or read book Plastics Technology Handbook Fourth Edition written by Manas Chanda and published by CRC Press. This book was released on 2006-12-19 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because the field of plastics is one of the fastest changing areas today, the need arises to offer relevant, comprehensive material on polymers. An established source of information on modern plastics, the Plastics Technology Handbook continues to provide up-to-date coverage on the properties, processing methods, and applications of polymers. Retaining the easy-to-follow structure of the previous editions, this fourth edition includes new topics of interest that reflect recent developments and lead to better insights into the molecular behavior of polymers. New to the Fourth Edition Advances in supramolecular polymerization, flame retardancy, polymer-based nanomedicines, and drug delivery The new concept of oxo-biodegradable polymers Broadened discussion on plastic foams and foam extrusion processes More information on the processing and applications of industrial polymers, including the emerging field of nanoblends Developments in polymer synthesis and applications, such as polymeric sensors, hydrogels and smart polymers, hyperbranched polymers, shape memory polymers, polymeric optical fibers, scavenger resins, polymer nanocomposites, polymerization-filled composites, and wood-polymer composites A state-of-the-art account of the various available methods for plastics recycling Advances in the use of polymers in packaging, construction, the automotive and aerospace industries, agriculture, electronics and electrical technology, biomedical applications, corrosion prevention, and sports and marine applications Plastics Technology Handbook, Fourth Edition thoroughly covers traditional industrial polymers and their processing methods as well as contemporary polymeric materials, recent trends, and the latest applications.

Download or read book Design and Manufacture of Plastic Components for Multifunctionality written by Vannessa Dr Goodship and published by William Andrew. This book was released on 2015-09-08 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacture of Plastic Components for Multifunctionality: Structural Composites, Injection Molding, and 3D Printing presents the latest information on how plastics manufacturers are increasingly being driven towards carbon emission reduction, lightweighting, and cost savings through process integration. These technologies have the potential to revolutionize future products with built-in functionality such as sensors, smart packaging, and damage detection technology for everything from milk bottles and salad packaging to automotive bumpers and plane fuselages. This book introduces the three core manufacturing methods for multifunctional materials, composites, injection molding, and 3D printing, all processes facing challenges for the implementation of new technology. Users will find a book that brings together both process and material advances in this area, giving process engineers, designers, and manufacturers the information they need to choose the appropriate material and process for the product they are developing. Provides an introduction to the latest technologies in the area of multifunctionality, enabling engineers to implement new breakthroughs in their own businesses Gives an understanding of the processes that need to be considered in both design and manufacture of future devices, while using materials from a broader palette than used in existing manufacturing processes Includes best practice guidance and flow charts to aid in material and process selection Covers revolutionary future products with built-in functionality such as sensors, smart packaging, and damage detection technology for everything from milk bottles and salad packaging to automotive bumpers and plane fuselages

Download or read book Towards a Sustainable Future Life Cycle Management written by Zbigniew Stanislaw Klos and published by Springer Nature. This book was released on 2022 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book includes a selection of contributions from the Life Cycle Management 2019 Conference (LCM) held in Poznań, Poland, and presents different examples of scientific and practical contributions, showing an incorporation of life cycle approach into the decision processes on strategic and operational level. Special attention is drawn to applications of LCM to target, organize, analyze and manage product-related information and activities towards continuous improvement, along the different products life cycle. The selection of case studies presents LCM as a business management approach that can be used by all types of businesses and organizations in order to improve their sustainability performance. This book provides a cross-sectoral, current picture of LCM issues. The structure of the book is based on five-theme lines. The themes represent different objects that are focused on sustainability and LCM practices mainly related to: products, technologies, organizations, markets and policy issues as well as methodological solutions. The book brings together presentations from the world of science and the world of enterprises as well as institutions supporting economic development.

Download or read book Biodegradable Poly Lactic Acid written by Jie Ren and published by Springer Science & Business Media. This book was released on 2011-04-05 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Biodegradable Poly (Lactic Acid): Synthesis, Modification, Processing and Applications" describes the preparation, modification, processing, and the research and applications of biodegradable poly (lactic acid), which belong to the biomedical and environment-friendly materials. Highly illustrated, the book introduces systematically the synthesis, physical and chemical modifications, and the latest developments of research and applications of poly (lactic acid) in biomedical materials. The book is intended for researchers and graduate students in the fields of materials science and engineering, polymer science and engineering, biomedicine, chemistry, environmental sciences, textile science and engineering, package materials, and so on. Dr. Jie Ren is a professor at the Institute of Nano and Bio-Polymeric Materials, School of Material Science and Engineering, Tongji University, Shanghai, China.

Download or read book Handbook of Sustainability in Additive Manufacturing written by Subramanian Senthilkannan Muthu and published by Springer. This book was released on 2016-03-02 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the sustainability aspects of additive manufacturing (AM) in two separate volumes. It describes the details of this technology and its implications on the entire product life cycle sustainability, as well as embedded carbon and the further research needed to move this technology towards sustainable, mainstream production. Sustainability is not new for any area of industry, including additive manufacturing, and there are currently a number of ongoing research projects, both in industry and in academic institutions, that are investigating sustainability, embedded carbon and research activities which would need to be done in the future to move this technology towards sustainable mainstream production.

Download or read book Plastics and the Environment written by Anthony L. Andrady and published by John Wiley & Sons. This book was released on 2003-02-20 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics offer a variety of environmental benefits. However, their production, applications, and disposal present many environmental concerns. Plastics and the Environment provides state-of-the-art technical and research information on the complex relationship between the plastic and polymer industry and the environment, focusing on the sustainability, environmental impact, and cost—benefit tradeoffs associated with different technologies. Bringing together the field’s leading researchers, Anthony Andrady’s innovative collection not only covers how plastics affect the environment, but also how environmental factors affect plastics. The relative benefits of recycling, resource recovery, and energy recovery are also discussed in detail. The first of the book’s four sections represents a basic introduction to the key subject matter of plastics and the environment; the second explores several pertinent applications of plastics with environmental implications–packaging, paints and coatings, textiles, and agricultural film use. The third section discusses the behavior of plastics in some of the environments in which they are typically used, such as the outdoors, in biotic environments, or in fires. The final section consists of chapters on recycling and thermal treatment of plastics waste. Chapters include: Commodity Polymers Plastics in Transportation Biodegradation of Common Polymers Thermal Treatment of Polymer Waste Incineration of Plastics The contributors also focus on the effectiveness of recent technologies in mitigating environmental impacts, particularly those for managing plastics in the solid waste stream. Plastic and design engineers, polymer chemists, material scientists, and ecologists will find Plastics and the Environment to be a vital resource to this critical industry.

Download or read book 3D Printing with Biomaterials written by A.J.M. van Wijk and published by IOS Press. This book was released on 2015-01-15 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing or 3D printing, manufacturing a product layer by layer, offers large design freedom and faster product development cycles, as well as low startup cost of production, on-demand production and local production. In principle, any product could be made by additive manufacturing. Even food and living organic cells can be printed. We can create, design and manufacture what we want at the location we want. 3D printing will create a revolution in manufacturing, a real paradigm change. 3D printing holds the promise to manufacture with less waste and energy. We can print metals, ceramics, sand, synthetic materials such as plastics, food or living cells. However, the production of plastics is nowadays based on fossil fuels. And that’s where we witness a paradigm change too. The production of these synthetic materials can be based also on biomaterials with biomass as feedstock. A wealth of new and innovative products are emerging when we combine these two paradigm changes: 3D printing and biomaterials. Moreover, the combination of 3D printing with biomaterials holds the promise to realize a truly sustainable and circular economy.

Download or read book Titanium written by Somi Seong and published by Rand Corporation. This book was released on 2009 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: Between 2003 and 2006, the price of titanium more than doubled. The authors attempt to answer four primary questions: What triggered this price surge? What are titanium's future market prospects and emerging technologies? What are the implications for the production cost of future military airframes? How might the Department of Defense mitigate the economic risks involved in the titanium market?

Download or read book Additive Manufacturing written by Amit Bandyopadhyay and published by CRC Press. This book was released on 2015-09-08 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of additive manufacturing has seen explosive growth in recent years due largely in part to renewed interest from the manufacturing sector. Conceptually, additive manufacturing, or industrial 3D printing, is a way to build parts without using any part-specific tooling or dies from the computer-aided design (CAD) file of the part. Today, mo