Download or read book Additive Manufacturing and Strategic Technologies in Advanced Ceramics written by Kiyoshi Shimamura and published by John Wiley & Sons. This book was released on 2016-08-18 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a collection of 22 papers submitted from the below seven symposia held during the 11th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE-11), June 14-19, 2015 in Vancouver, BC, Canada: Additive Manufacturing Technologies Advanced Materials, Technologies, and Devices for Electro-optical and Biomedical Applications Multifunctional Coatings for Energy and Environmental Applications Novel, Green, and Strategic Processing and Manufacturing Technologies Powder Processing Technology for Advanced Ceramics Computational Design and Modeling Materials for Extreme Environments: Ultra-high Temperature Ceramics (UHTCs) and Nanolaminated Ternary Carbides and Nitrides (MAX Phases)

Download or read book Additive Manufacturing and Strategic Technologies in Advanced Ceramics written by Kiyoshi Shimamura and published by John Wiley & Sons. This book was released on 2016-08-16 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a collection of 22 papers submitted from the below seven symposia held during the 11th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE-11), June 14-19, 2015 in Vancouver, BC, Canada: Additive Manufacturing Technologies Advanced Materials, Technologies, and Devices for Electro-optical and Biomedical Applications Multifunctional Coatings for Energy and Environmental Applications Novel, Green, and Strategic Processing and Manufacturing Technologies Powder Processing Technology for Advanced Ceramics Computational Design and Modeling Materials for Extreme Environments: Ultra-high Temperature Ceramics (UHTCs) and Nanolaminated Ternary Carbides and Nitrides (MAX Phases)

Download or read book Developments in Strategic Materials and Computational Design II Volume 32 Issue 10 written by Andrew Gyekenyesi and published by John Wiley & Sons. This book was released on 2011-11-11 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Thermal Management Materials and Technologies; Advanced Sensor Technology; Geopolymers; and Computational Design, Modeling, and Simulation of Ceramics and Composites symposia.

Download or read book Applications of Advanced Ceramics in Science Technology and Medicine written by K. Chandra Babu Naidu and published by Bentham Science Publishers. This book was released on 2020-10-02 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of Advanced Ceramics in Science, Technology, and Medicine explores a broad range of advanced ceramic materials and their innovative applications in distinct fields. Chapters cover applications such as actuators, energy storage, environmental health and monitoring, 3D printing, electronics, biomedical engineering and EMI shielding. Chapters provide readers with an overview of the structural and fundamental properties, synthesis strategies and versatile applications of advanced ceramic materials and their composites. The information in the volume will be beneficial for students, research scholars, faculty members and R&D specialists working in the area of material science, nanotechnology, solid-state science, chemical engineering, power sources and renewable energy storage.

Download or read book Advanced Ceramic Technologies Products written by The Ceramic Society of Japan and published by Springer Science & Business Media. This book was released on 2012-07-31 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Ceramic Technologies & Products describes the development, materials, and manufacturing processes for various ceramic products. The text focuses on the products themselves, and tries to clarify how ceramics have contributed to our lives.

Download or read book Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II Volume 36 Issue 6 written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2016-01-05 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Ceramic Engineering and Science Proceeding has been published by The American Ceramic Society since 1980. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

Download or read book Innovative Processing and Manufacturing of Advanced Ceramics and Composites II written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2014-02-03 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains collection of papers from the below symposia held during the 10th Pacific Rim Conference on Ceramic and Glass Technology (PacRim10), June 2-7, 2013, in Coronado, California 2012: Novel, Green, and Strategic Processing and Manufacturing Technologies Polymer Derived Ceramics and Composites Advanced Powder Processing and Manufacturing Technologies Synthesis and Processing of Materials Using Electric Fields/Currents

Download or read book Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development written by Mrityunjay Singh and published by John Wiley & Sons. This book was released on 2017-06-22 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global population growth and tremendous economic development has brought us to the crossroads of long-term sustainability and risk of irreversible changes in the ecosystem. Energy efficient and ecofriendly technologies and systems are critically needed for further growth and sustainable development. While ceramic matrix composites were originally developed to overcome problems associated with the brittle nature of monolithic ceramics, today the composites can be tailored for customized purposes and offer energy efficient and ecofriendly applications, including aerospace, ground transportation, and power generation systems. The 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC 9) was held in Toronto, Canada, June 26-30, 2016 to discuss challenges and opportunities in manufacturing, commercialization, and applications for these important material systems. The Global Forum on Advanced Materials and Technologies for Sustainable Development (GFMAT 2016) was held in conjunction with HTCMC 9 to address key issues, challenges, and opportunities in a variety of advanced materials and technologies that are critically needed for sustainable societal development. This Ceramic Transactions volume contains a collection of peer reviewed papers from the 16 below symposia that were submitted from these two conferences Design and Development of Advanced Ceramic Fibers, Interfaces, and Interphases in Composites- A Symposium in Honor of Professor Roger Naslain Innovative Design, Advanced Processing, and Manufacturing Technologies Materials for Extreme Environments: Ultrahigh Temperature Ceramics (UHTCs) and Nano-laminated Ternary Carbides and Nitrides (MAX Phases) Polymer Derived Ceramics and Composites Advanced Thermal and Environmental Barrier Coatings: Processing, Properties, and Applications Thermomechanical Behavior and Performance of Composites Ceramic Integration and Additive Manufacturing Technologies Component Testing and Evaluation of Composites CMC Applications in Transportation and Industrial Systems Powder Processing Innovation and Technologies for Advanced Materials and Sustainable Development Novel, Green, and Strategic Processing and Manufacturing Technologies Ceramics for Sustainable Infrastructure: Geopolymers and Sustainable Composites Advanced Materials, Technologies, and Devices for Electro-optical and Medical Applications Porous Ceramics for Advanced Applications Through Innovative Processing Multifunctional Coatings for Sustainable Energy and Environmental Applications

Download or read book A Strategic Analysis of the Advanced Ceramics Industry for Heat Engine Applications written by Dionissios Nikolaou Assanis and published by . This book was released on 1986 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Ceramics and Future Materials written by Fritz Aldinger and published by John Wiley & Sons. This book was released on 2010-04-26 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting out from the fundamentals, this book covers the chemistry and physics of ceramic materials, as well as their behavior and resulting properties, including bio-inspired approaches and microstructural aspects. As such, it presents production methods as well as the scientific background, teaching all important mathematical methods: classical, quantum-mechanical, phenomenological, and model-based approaches. Further emphasis is laid upon the current state of the art and possible developments and challenges within the near future.

Download or read book Advanced Additive Manufacturing written by Igor V. Shishkovsky and published by BoD – Books on Demand. This book was released on 2022-07-20 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is now being used to produce series components for the most demanding applications. It is a disruptive, if not revolutionary, manufacturing technology. The biggest advantage of this technology is its capacity to make parts with any free form, thus paving the way for free and complex part design. Components and integrated structures with complex designs that would not have been possible just a few years ago can now be made according to various requirements. The net-shape manufacturing capacity of AM allows a considerable saving of materials, conventional thermomechanical processing, and machining processes, making it an environmentally friendly manufacturing technology. This book includes two sections that cover new approaches in AM for biomedical applications and advanced technological solutions.

Download or read book Technology Strategy for Metal based Additive Manufacturing written by Marc Matthias Schneck and published by utzverlag GmbH. This book was released on 2022-01-14 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Additive Manufacturing for Advance Applications written by Pawan Sharma and published by CRC Press. This book was released on 2024-06-26 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the latest trends such as 4D printing, wire arc additive manufacturing (WAAM), direct energy deposition, and topological optimization in additive manufacturing (AM), and its compliance with the ASTM/ISO standards. It further explains materials for additive manufacturing and the development of novel future materials. The focus of this book is to cover the fundamentals, principles, selection of material and equipment, and applications of additive manufacturing (AM) in a comprehensive manner. It will showcase information about the effective utilization of additive manufacturing for advanced applications in diverse areas such as biomedical, aerospace, automobile, defence, and reverse engineering. The other main features are- · Covers comprehensive discussion on the theoretical aspects of additive manufacturing such as sintering, diffusion, and photopolymerization. · Showcases applications of additive manufacturing in diverse fields including aerospace engineering, automotive engineering, biomedical engineering, and reverse engineering. · Presents case studies to showcase real-time problems and solutions using additive manufacturing. · Includes pedagogical features such as algorithms, exercises, and case studies. The text is primarily written for senior undergraduate, graduate students, and academic researchers in the fields of manufacturing engineering, industrial engineering, production engineering, mechanical engineering, and aerospace engineering.

Download or read book Ceramic Materials for Energy Applications Volume 32 Issue 9 written by Yutai Katoh and published by John Wiley & Sons. This book was released on 2011-10-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Ceramics for Electric Energy Generation, Storage and Distribution; Advanced Ceramics and Composites for Nuclear and Fusion Applications; and Advanced Materials and Technologies for Rechargeable Batteries symposia.

Download or read book Advanced Ceramic Processing and Technology written by J. Binner and published by William Andrew. This book was released on 1990 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of two volumes offering state-of-the-art views and directions for future research. Covers advanced processing concepts for increased ceramic reliability, processing of silicon nitrate powders, processing of electronic ceramics and of ceramic composites, injection molding, microwave processing, and thin film deposition processes for electronic and structural ceramics. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Practical Implementations of Additive Manufacturing Technologies written by Shashanka Rajendrachari and published by Springer Nature. This book was released on 2023-09-30 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives in-depth information about evolution of additive manufacturing from a few decades to the present explaining how the technology has been improved with time and its practical implementation of the technology in various applications and industries. It describes the different types of additive manufacturing methods used to prepare materials and their advantages, followed by the limitations. This includes the fabrication of metal, polymer, biomaterial, hybrid nanomaterial, smart material, and ceramic materials using additive manufacturing methods used in many applications such as 3D printed batteries, supercapacitors, electrochemical sensors, biosensors, aircraft interior components, rocket engines components, automobile components, and medical implants. It also describes advanced applications of additive manufacturing materials in the construction, biomedical, and sports industries. In addition, the book also deep dives into the environmental impact and economic benefits of additive manufacturing industries. A special chapter is included to give an overview on the general type of job opportunities for engineering graduates and research scholars seeking to find employment in additive manufacturing companies. In short, the content of this book targets primarily researchers, engineering students (bachelors and masters), and industrial engineers.

Download or read book Additive Manufacturing of Polymers for Tissue Engineering written by Atul Babbar and published by CRC Press. This book was released on 2022-09-27 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Application of additive manufacturing and tissue engineering in the fields of science and technology enables the manufacturing of biocompatible, customized, reliable, and cost-effective parts, restoring the functionality of a failed human body part. This book offers a platform for recent breakthroughs in additive manufacturing related to biomedical applications. This book highlights some of the top innovations and advances in additive manufacturing and processing technologies that are the future of the manufacturing industry while also presenting current challenges and opportunities regarding the choice of material. This book includes areas of applications such as surgical guides, tissue regeneration, artificial scaffolds, implants, and drug delivery and release. Throughout the book, an emphasis is placed on rapid tooling for engineering applications. Additive Manufacturing of Polymers for Tissue Engineering: Fundamentals, Applications, and Future Advancements acts as a first-hand source of information for academic scholars and commercial manufacturers as they make strategic manufacturing and development plans.