Download or read book Additive and Traditionally Manufactured Components written by Joshua Pelleg and published by Elsevier. This book was released on 2020-04-30 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive and Traditionally Manufactured Components: A Comparative Analysis of Mechanical Properties looks at the mechanical properties of materials produced by additive manufacturing (AM) and compares them with conventional methods. Since the production of objects by AM techniques can used in a broad array of materials, the alloys presented are the ones most commonly produced by AM - Al alloys, Ti alloys and steel. The book explores the six main types of techniques: Fused Deposition Method (FDM), Powder Bed Fusion (PBF), Inkjet Printing, Stereolithography (SLA), Direct Energy Deposition (DED) and Laminated Object Manufacturing (LOM), and follows with the techniques being utilized for fabrication. Testing of AM fabricated specimens, including tension, compression and hardness is included, along with a comparison of those results to specimens obtained by conventional fabrication methods. Topics covered include static deformation, time dependent deformation (creep), cyclic deformation (fatigue) and fracture in specimens. The book concludes with a review of the mechanical properties of nanoscale specimens obtained by AM.

Download or read book Additive and Traditionally Manufactured Components written by Joshua Pelleg and published by Elsevier. This book was released on 2020-04-30 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive and Traditionally Manufactured Components: A Comparative Analysis of Mechanical Properties looks at the mechanical properties of materials produced by additive manufacturing (AM) and compares them with conventional methods. Since the production of objects by AM techniques can used in a broad array of materials, the alloys presented are the ones most commonly produced by AM - Al alloys, Ti alloys and steel. The book explores the six main types of techniques: Fused Deposition Method (FDM), Powder Bed Fusion (PBF), Inkjet Printing, Stereolithography (SLA), Direct Energy Deposition (DED) and Laminated Object Manufacturing (LOM), and follows with the techniques being utilized for fabrication. Testing of AM fabricated specimens, including tension, compression and hardness is included, along with a comparison of those results to specimens obtained by conventional fabrication methods. Topics covered include static deformation, time dependent deformation (creep), cyclic deformation (fatigue) and fracture in specimens. The book concludes with a review of the mechanical properties of nanoscale specimens obtained by AM. - Thoroughly explores AM processes that can be utilized for experimental design - Includes a review of dislocations observed in specimens obtained by AM - Compares the impact of both additive and traditional manufacturing techniques on the mechanical properties of materials

Download or read book Additive Manufacturing Materials Processes Quantifications and Applications written by Jing Zhang and published by Butterworth-Heinemann. This book was released on 2018-05-17 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing: Materials, Processes, Quantifications and Applications is designed to explain the engineering aspects and physical principles of available AM technologies and their most relevant applications. It begins with a review of the recent developments in this technology and then progresses to a discussion of the criteria needed to successfully select an AM technology for the embodiment of a particular design, discussing material compatibility, interfaces issues and strength requirements. The book concludes with a review of the applications in various industries, including bio, energy, aerospace and electronics. This book will be a must read for those interested in a practical, comprehensive introduction to additive manufacturing, an area with tremendous potential for producing high-value, complex, individually customized parts. As 3D printing technology advances, both in hardware and software, together with reduced materials cost and complexity of creating 3D printed items, these applications are quickly expanding into the mass market. - Includes a discussion of the historical development and physical principles of current AM technologies - Exposes readers to the engineering principles for evaluating and quantifying AM technologies - Explores the uses of Additive Manufacturing in various industries, most notably aerospace, medical, energy and electronics

Download or read book Additive Manufacturing written by Amit Bandyopadhyay and published by CRC Press. This book was released on 2015-09-08 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of additive manufacturing has seen explosive growth in recent years due largely in part to renewed interest from the manufacturing sector. Conceptually, additive manufacturing, or industrial 3D printing, is a way to build parts without using any part-specific tooling or dies from the computer-aided design (CAD) file of the part. Today, mo

Download or read book Fundamentals of Laser Powder Bed Fusion of Metals written by Igor Yadroitsev and published by Elsevier. This book was released on 2021-05-23 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser powder bed fusion of metals is a technology that makes use of a laser beam to selectively melt metal powder layer-by-layer in order to fabricate complex geometries in high performance materials. The technology is currently transforming aerospace and biomedical manufacturing and its adoption is widening into other industries as well, including automotive, energy, and traditional manufacturing. With an increase in design freedom brought to bear by additive manufacturing, new opportunities are emerging for designs not possible previously and in material systems that now provide sufficient performance to be qualified in end-use mission-critical applications. After decades of research and development, laser powder bed fusion is now enabling a new era of digitally driven manufacturing. Fundamentals of Laser Powder Bed Fusion of Metals will provide the fundamental principles in a broad range of topics relating to metal laser powder bed fusion. The target audience includes new users, focusing on graduate and undergraduate students; however, this book can also serve as a reference for experienced users as well, including senior researchers and engineers in industry. The current best practices are discussed in detail, as well as the limitations, challenges, and potential research and commercial opportunities moving forward. - Presents laser powder bed fusion fundamentals, as well as their inherent challenges - Provides an up-to-date summary of this advancing technology and its potential - Provides a comprehensive textbook for universities, as well as a reference for industry - Acts as quick-reference guide

Download or read book Additive Manufacturing Handbook written by Adedeji B. Badiru and published by CRC Press. This book was released on 2017-05-19 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretical and practical interests in additive manufacturing (3D printing) are growing rapidly. Engineers and engineering companies now use 3D printing to make prototypes of products before going for full production. In an educational setting faculty, researchers, and students leverage 3D printing to enhance project-related products. Additive Manufacturing Handbook focuses on product design for the defense industry, which affects virtually every other industry. Thus, the handbook provides a wide range of benefits to all segments of business, industry, and government. Manufacturing has undergone a major advancement and technology shift in recent years.

Download or read book Additive Manufacturing of Metals The Technology Materials Design and Production written by Li Yang and published by Springer. This book was released on 2017-05-11 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a unique guide to the three-dimensional (3D) printing of metals. It covers various aspects of additive, subtractive, and joining processes used to form three-dimensional parts with applications ranging from prototyping to production. Examining a variety of manufacturing technologies and their ability to produce both prototypes and functional production-quality parts, the individual chapters address metal components and discuss some of the important research challenges associated with the use of these technologies. As well as exploring the latest technologies currently under development, the book features unique sections on electron beam melting technology, material lifting, and the importance this science has in the engineering context. Presenting unique real-life case studies from industry, this book is also the first to offer the perspective of engineers who work in the field of aerospace and transportation systems, and who design components and manufacturing networks. Written by the leading experts in this field at universities and in industry, it provides a comprehensive textbook for students and an invaluable guide for practitioners

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.

Download or read book Additive Manufacturing written by T.S. Srivatsan and published by CRC Press. This book was released on 2015-09-25 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get Ready for the Future of Additive ManufacturingAdditive Manufacturing: Innovations, Advances, and Applications explores the emerging field of additive manufacturing (AM)-the use of 3D printing to make prototype parts on demand. Often referred to as the third industrial revolution, AM offers many advantages over traditional manufacturing. This pr

Download or read book Modern Manufacturing Technology written by Jitendra Kumar Katiyar and published by CRC Press. This book was released on 2021-12-03 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Manufacturing Technology: Spotlight on Future summarizes the emergence and development of modern manufacturing techniques (MMTs) with a focus on metallic and advanced material-based additive manufacturing technologies and their potential applications. Further, it explores advanced machining techniques for production of novel nanomaterials. The book also covers modern sophisticated techniques for the fabrication of ultrafine electronic devices such as micro-electromechanical systems (MEMS), nano-electromechanical systems (NEMS), semiconductors, and optical systems. A dedicated chapter on manufacturing technology for Industry 4.0 is included. Features: Describes the background of manufacturing techniques in brief including the advent of and introduction to MMTs Reviews various types of MMTs established in recent years and their accelerated growth and development innovation-driven applications Overviews the physical and chemical techniques used for nanomaterials production Explores the fabrication mechanisms of MEMS, NEMS, semiconductors and optical devices Provides a conceptual overview of additive manufacturing technologies This book is geared to undergraduate and postgraduate students and professionals in mechanical and manufacturing engineering, and the manufacturing industry.

Download or read book Advances in Additive Manufacturing written by Sandip Kunar and published by John Wiley & Sons. This book was released on 2024-10-22 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the fundamentals of additive manufacturing and its components, explains why and what we do, outlines what is crucial to the user, offers details on important applications such as in the aerospace, automotive, or medical areas, and the difficult certification process. This book explores the advancements in additive manufacturing which produces solid, free-form, nearly net-shaped objects. This refers to items that are easy to use, out-of-the-box, and not bound by the design constraints of modern manufacturing techniques. AM expands the definition of 3D printing to encompass a variety of procedures that begin with a three-dimensional computer model, incorporate an AM production procedure, and result in a useful product. The AM process can be confusing due to the rapid rise of competing techniques for fabricating 3D parts. This volume provides a thorough review of the basic components and procedures involved in additive manufacturing. It outlines a road map for where to begin, what to study, how everything goes together, and how AM might enable ideas outside traditional processing to realize those ideas in AM. Furthermore, this book investigates the benefits of AM including affordable access to 3D solid modeling software. With this software, learning is achieved without having to invest in costly industrial equipment. AM encompasses a variety of techniques, including those that use high-intensity beams to fuse powder or wire, and hybrid techniques that combine additive and subtractive manufacturing techniques. AM-related processes have developed at breakneck speed, giving rise to a deluge of acronyms and terminology, not to mention the emergence, acquisition, and demise of new businesses. By combining ideas and aspirations, better methods will be revealed that result in useful products that will serve and contribute to a lasting future. Although expensive commercial additive manufacturing equipment can cost hundreds of thousands to millions of dollars, a lack of access to equipment does not preclude the study of the technology. 3D printing services will undoubtedly become more reasonable for small- and medium-sized organizations as their prices decline. Hybrid 3D plastic printing technologies and low-cost hobbyist 3D weld deposition systems are already in development which will make the best 3D printers accessible and affordable. This book will assist the reader in determining what is required to begin, which software, supplies, and procedures best suit, and where to obtain additional information. Audience The book will be used by engineers and R&D researchers involved in advanced additive manufacturing technology, postgraduate students in various disciplines such as mechanical, manufacturing, biomedical, and industrial engineering, etc. It will also serve as a reference manual for manufacturing and materials engineers involved in additive manufacturing and product development.

Download or read book Superalloys 2020 written by Sammy Tin and published by Springer Nature. This book was released on 2020-08-28 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 14th International Symposium on Superalloys (Superalloys 2020) highlights technologies for lifecycle improvement of superalloys. In addition to the traditional focus areas of alloy development, processing, mechanical behavior, coatings, and environmental effects, this volume includes contributions from academia, supply chain, and product-user members of the superalloy community that highlight technologies that contribute to improving manufacturability, affordability, life prediction, and performance of superalloys.

Download or read book Research in Interactive Design Vol 4 written by Xavier Fischer and published by Springer. This book was released on 2016-03-02 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering key topics in the field such as technological innovation, human-centered sustainable engineering and manufacturing, and manufacture at a global scale in a virtual world, this book addresses both advanced techniques and industrial applications of key research in interactive design and manufacturing. Featuring the full papers presented at the 2014 Joint Conference on Mechanical Design Engineering and Advanced Manufacturing, which took place in June 2014 in Toulouse, France, it presents recent research and industrial success stories related to implementing interactive design and manufacturing solutions.

Download or read book Smart Technologies for Improved Performance of Manufacturing Systems and Services written by Bikash Chandra Behera and published by CRC Press. This book was released on 2023-09-28 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses smart technologies and their influence in the field of manufacturing and industrial systems engineering, in the context of performability enhancement, and explores the development of the workforce for the execution of such smart and advanced technologies. Smart Technologies for Improved Performance of Manufacturing Systems and Services discusses the integration of smart technology into the production process and supply chain to enhance the overall performance of manufacturing industries. As well as emphasizing the fundamentals of smart technologies, such as artificial intelligence, big data, and cyber-physical systems, it highlights the role that machine learning plays along with other smart technologies. Real-time case studies highlight the applications of smart digital technologies, and research insights into the area of performability and overall sustainable development round out the great range of discussions this reference book has to offer. Managers and stakeholders seeking coverage on techniques and methods for integration into their organizations, as well as students and researchers in the field will find this book very useful.

Download or read book Mobile Wireless Middleware Operating Systems and Applications written by Dalai Tang and published by Springer Nature. This book was released on 2022-05-20 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 10th International Conference on Mobile Wireless Middleware, Operating Systems and Applications (MOBILWARE 2021), held virtually in a live stream. The papers included contribute to organized topics of 5G wireless communication, wireless sensor networks, knowledge extraction, instantaneous availability, complex networks, computer vision for mobile application, and mobile support robots. The research presents both theoretically and experimentally based topics. The work particularly benefits researchers, graduate students, and engineers who are interested in related technique improvement ranging from communication middleware and operating systems to networking protocols and applications. Presents the proceedings of the 10th International Conference on Mobile Wireless Middleware, Operating Systems and Applications (MOBILWARE 2021); Topics include 5G wireless communication, wireless sensor networks, knowledge extraction, and instantaneous availability; Relevant to researchers, students, and engineers involved in wireless technology and its applications.

Download or read book Advances in Ergonomics of Manufacturing Managing the Enterprise of the Future written by Christopher Schlick and published by Springer. This book was released on 2016-07-26 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in people-centered design, operation, and management of broadly defined advanced manufacturing systems and processes. It reports on human factors issues related to various research areas such as intelligent manufacturing technologies, web-based manufacturing services, digital manufacturing worlds, and manufacturing knowledge support systems, as well as other contemporary manufacturing environments. The book covers an extensive range of applications of human factors in the manufacturing industry: from work design, supply chains, evaluation of work systems, and social and organization design, to manufacturing systems, simulation and visualization, automation in manufacturing, and many others. Special emphasis is given to computer aided manufacturing technologies supporting enterprises, both in general and in the manufacturing industry in particular, such as knowledge-based systems, virtual reality, artificial intelligence methods, and many more. Based on the AHFE 2016 International Conference on Human Aspects of Advanced Manufacturing, held on July 27-31, 2016, in Walt Disney World®, Florida, USA, the book provides readers with a timely snapshot of the enterprises of the future and a set of cutting-edge technologies and methods for building innovative, human-centered, and computer-integrated manufacturing systems.

Download or read book Data Driven Mining Learning and Analytics for Secured Smart Cities written by Chinmay Chakraborty and published by Springer Nature. This book was released on 2021-04-28 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides information on data-driven infrastructure design, analytical approaches, and technological solutions with case studies for smart cities. This book aims to attract works on multidisciplinary research spanning across the computer science and engineering, environmental studies, services, urban planning and development, social sciences and industrial engineering on technologies, case studies, novel approaches, and visionary ideas related to data-driven innovative solutions and big data-powered applications to cope with the real world challenges for building smart cities.