Download or read book Theory of Adaptive Structures written by Senol Utku and published by CRC Press. This book was released on 1998-02-18 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of Adaptive Structures provides the basic theory for controlling adaptive structures in static and dynamic environments. It synthesizes well-established theories on modern control as well as statics and dynamics of deformable bodies. Discussions concentrate on the discrete parameter adaptive structures dealing with actuator placement, actuator selection, and actuation computation problems - keeping these structures at close proximity of any chosen nominal state with the least energy consumption. An introduction to the distributed parameter adaptive structures is also provided. The book follows that modern trend in research and industry striving to incorporate intelligence into engineered products through microprocessors that are becoming smaller, faster, and cheaper at astounding rates. Not using them in engineered products may become an enormous liability. Resulting from the advances in materials technology on sensors and actuator technologies as well as the availability of very powerful and reliable microprocessors, there is an ever-increasing interest in actively controlling the behavior of engineering systems. Engineers and engineering scientists must revive and broaden their activities to maximize applications for predicting and controlling the behavior of deformable bodies. Topics include: An introduction to adaptive structures Incremental excitation-response relations in static and dynamic cases Active control of response in static case Statically determinate adaptive structures Statically indeterminate adaptive structures Active vibration control for autonomous and non-autonomous cases Active control against wind Active control against seismic loads Distributed parameter adaptive structures The technology of adaptive structures has created an environment where the analysis, not the computation, of structural response - due to actuator-inserted deformations - has become important. Problems related to the placement, the operation in real time, and the energy consumption of the actuators require the review and broadening of the theories long dormant due to the emphasis placed in the numerical simulations of structural behavior by the displacement finite element method. This book furnishes the basic theory needed by modern engineers in the design and control of discrete parameter adaptive structures .
Download or read book Adaptive Structures written by David Wagg and published by John Wiley & Sons. This book was released on 2008-04-09 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive structures have the ability to adapt, evolve or change their properties or behaviour in response to the environment around them. The analysis and design of adaptive structures requires a highly multi-disciplinary approach which includes elements of structures, materials, dynamics, control, design and inspiration taken from biological systems. Development of adaptive structures has been taking place in a wide range of industrial applications, but is particularly advanced in the aerospace and space technology sector with morphing wings, deployable space structures; piezoelectric devices and vibration control of tall buildings. Bringing together some of the foremost world experts in adaptive structures, this unique text: includes discussions of the application of adaptive structures in the aerospace, military, civil engineering structures, automotive and MEMS. presents the impact of biological inspiration in designing adaptive structures, particularly the use of hierarchy in nature, which typically induces multi-functional behavior. sets the agenda for future research in adaptive structures in one distinctive single volume. Adaptive Structures: Engineering Applications is essential reading for engineers and scientists working in the fields of intelligent materials, structural vibration, control and related smart technologies. It will also be of interest to senior undergraduate and postgraduate research students as well as design engineers working in the aerospace, mechanical, electrical and civil engineering sectors.
Download or read book Adaptive Structures written by Robert L. Clark and published by Wiley-Interscience. This book was released on 1998-03-31 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Engineering/Materials Science An applications-oriented approach for engineers and advanced students Adaptive Structures covers the key concepts and practical issues involved in translating much of the theory of adaptive structures into successful, real-world hardware. Easily applied to a variety of application physics, the material emphasizes the integration of control strategies, transduction device dynamics, and spatial signal processing through novel sensing methods and actuator configurations (physical or transformed coordinates). The book contains essential models of adaptive structures and components to facilitate design approaches. The accompanying disk features script files, operating under MATLAB, which can be used to generate most of the results presented throughout the book and are invaluable to readers developing their own structural models. Topics include: * Fundamentals of structural dynamics; linear systems and signals; and signal processing and digital filters * The integration of spatial and temporal signal processing techniques * Transduction device dynamics and links between physical, modal, and wave domain models for structural dynamic analysis and control * An overview of classical controls * An application-oriented review of adaptive feedforward control and multivariable feedback control system architectures
Download or read book Design and Control of Adaptive Civil Structures written by Gennaro Senatore and published by Frontiers Media SA. This book was released on 2021-09-13 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Goals Goal Structures and Patterns of Adaptive Learning written by Carol Midgley and published by Routledge. This book was released on 2014-04-08 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conducted over a 7yr period & spawning many jrnl pub's, this vol. will summarize the many interconnected studies that were conducted, will frame each one in terms of the larger lit, & will emphasize their contrib's to motivational theory & educ. practice
Download or read book Adaptive Structures Tenth International Conference Proceedings written by Roger Ohayon and published by CRC Press. This book was released on 2000-03-13 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adaptive Structures and Technology Ninth International Conference written by Nesbitt Hagood IV and published by CRC Press. This book was released on 1999-03-11 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Eighth International Conference on Adaptive Structures written by Yoshisada Murotsu and published by CRC Press. This book was released on 1998-03-16 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industry 6 0 written by C Kishor Kumar Reddy and published by CRC Press. This book was released on 2024-10-16 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: What are the means to create a paradigm shift from conventional to intelligent companies? Industry 6.0: Technology, Practices, Challenges and Applications shows how integrating Industry 6.0 technology with data creates a framework for that shift. The book discusses the limitations, pitfalls, and open research questions in Industry 6.0, as well as the most recent advances, architectures, frameworks, applications, and novel practices, methods, and techniques. These are vital for resolving intelligent Internet of Things issues. There is a special focus on sustainable growth, humanization and environmentally friendly intelligent system applications, and an emphasis on the latest innovations in intelligent systems in classical machine learning, deep learning, Internet of Things (IoT), Industrial Internet of Things (IIoT), blockchain, knowledge representation, knowledge management, big data, and natural language processing (NLP). Features: Presents the latest trends in the fields of intelligent systems, machine intelligence, deep learning, and Industrial Internet of Things for smart environments. Discusses securing the mobile ad hoc network (MANET) by detecting the Intrusions using CSO and XGBoost model. Highlights the methods of smart things in collaborative autonomous fleets and platforms for integrating applications across different business and industry domains. Focuses on intelligent process manufacturing, automation using robotics, development of robotic appliances, and smart manufacturing. Covers data-driven agriculture, crop disease prediction, drip irrigation systems, pesticide and fertilizer sprinkling using the Industrial Internet of Things, and water estimation systems. With many contemporary articles from both scientists and practitioners working in many fields where intelligent systems and the IIoT can break new ground, the text is assembled to aim at a readership that includes researchers, statisticians, practitioners, scientists, and developers.
Download or read book Adaptive Strategies for Water Heritage written by Carola Hein and published by Springer Nature. This book was released on 2019-10-18 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access book, building on research initiated by scholars from the Leiden-Delft-Erasmus Centre for Global Heritage and Development (CHGD) and ICOMOS Netherlands, presents multidisciplinary research that connects water to heritage. Through twenty-one chapters it explores landscapes, cities, engineering structures and buildings from around the world. It describes how people have actively shaped the course, form and function of water for human settlement and the development of civilizations, establishing socio-economic structures, policies and cultures; a rich world of narratives, laws and practices; and an extensive network of infrastructure, buildings and urban form. The book is organized in five thematic sections that link practices of the past to the design of the present and visions of the future: part I discusses drinking water management; part II addresses water use in agriculture; part III explores water management for land reclamation and defense; part IV examines river and coastal planning; and part V focuses on port cities and waterfront regeneration. Today, the many complex systems of the past are necessarily the basis for new systems that both preserve the past and manage water today: policy makers and designers can work together to recognize and build on the traditional knowledge and skills that old structure embody. This book argues that there is a need for a common agenda and an integrated policy that addresses the preservation, transformation and adaptive reuse of historic water-related structures. Throughout, it imagines how such efforts will help us develop sustainable futures for cities, landscapes and bodies of water.
Download or read book Intelligent Structures written by K.P. Chong and published by CRC Press. This book was released on 2003-10-04 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the International Workshop on Intelligent Structures, Taipei, Taiwan, 23-26 July 1990.
Download or read book Adaptronics and Smart Structures written by Hartmut Janocha and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptronics is the term encompassing technical fields that have become known internationally under the names "smart materials", "intelligent structures", and "smart structures". Adaptronics contributes to the optimisation of systems and products. It bridges the gap between material and system or product, and incorporates the search for multi-functional materials and elements and their integration in systems or structures. The authors of this book have taken on the task of displaying the current state of the art in this fascinating field. The system components, actuators, sensors and controllers, technical fundamentals, materials, design rules and practical solutions are all described. Selected sample applications are also presented and current development trends are demonstrated.
Download or read book Smart Structures Theory written by Inderjit Chopra and published by Cambridge University Press. This book was released on 2014 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on smart materials and structures, which are also referred to as intelligent, adaptive, active, sensory, and metamorphic. The ultimate goal is to develop biologically inspired multifunctional materials with the capability to adapt their structural characteristics, monitor their health condition, perform self-diagnosis and self-repair, morph their shape, and undergo significant controlled motion.
Download or read book Structures and Architecture A Viable Urban Perspective written by Marie Frier Hvejsel and published by CRC Press. This book was released on 2022-07-07 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structures and Architecture. A Viable Urban Perspective? contains extended abstracts of the research papers and prototype submissions presented at the Fifth International Conference on Structures and Architecture (ICSA2022, Aalborg, Denmark, 6-8 July 2022). The book (578 pages) also includes a USB with the full texts of the papers (1448 pages). The contributions on creative and scientific aspects in the conception and construction of structures as architecture, and on the role of advanced digital-, industrial- and craft -based technologies in this matter represent a critical blend of scientific, technical, and practical novelties in both fields. Hence, as part of the proceedings series Structures and Architecture, the volume adds to a continuous exploration and development of the synergetic potentials of the fields of Structures and Architecture. With each volume further challenging the conditions, problems, and potentials related to the art, practice, and theory of teaching, researching, designing, and building structures as vehicles towards a viable architecture of the urban environment. The volumes of the series appear once every three years, in tandem with the conferences organized by the International Association of Structures and Architecture and are intended for a global readership of researchers, practitioners, and students, including architects, structural and construction engineers, builders and building consultants, constructors, material suppliers, planners, urban designers, anthropologists, economists, sociologists, artists, product manufacturers, and other professionals involved in the design and realization of architectural, structural, and infrastructural projects.
Download or read book Smart Materials and Structures written by G.R Tomlinson and published by CRC Press. This book was released on 1998-01-01 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant changes have occurred in materials science, including increasing demands on life extensions, and the reliability and exploitability of components, materials, and structures. These changes provide smart technologies with excellent application opportunities in aerospace, civil and electrical engineering, transportation, manufacturing, com
Download or read book Adaptronics Smart Structures and Materials written by Johannes Michael Sinapius and published by Springer Nature. This book was released on 2020-08-24 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1980s, scientists have been researching adaptive structures for materials, for multifunctional elements or even for complete systems. Adaptronics (smart materials, smart structures, smart systems) is a field of distinct interdisciplinarity. The book therefore offers an interdisciplinary view of adaptronic systems, materials and functional elements and their applications. The subject matter integrates various engineering disciplines, from electrical engineering and information technology to manufacturing and control engineering, materials engineering and structural mechanics - to name but a few of the relevant subject areas. Starting from the basic principles and variants of adaptronic systems and functional materials, the textbook explains the different construction methods of functional elements. Building on this, readers learn how to apply this knowledge to active shape control, active vibration control and active vibroacoustics. For each of these topics the author presents current examples from research, discusses research results and future research questions. Each of the nine chapters closes with references to further literature. An index of the mathematical symbols used and a keyword index facilitate learning for readers.The book is aimed at Master's students in engineering courses such as mechanical engineering, aerospace engineering, mechatronics, automotive engineering and related courses. The book provides a comprehensive overview for industrial practitioners who want to familiarize themselves with the field of adaptronics and also serves as a reliable reference book.
Download or read book Advances in Ergonomics in Design written by Francisco Rebelo and published by Springer. This book was released on 2017-06-22 with total page 1043 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a timely snapshot of ergonomics research and methods applied to the design, development and prototyping – as well as the evaluation, training and manufacturing – of products, systems and services. Combining theoretical contributions, case studies, and reports on technical interventions, it covers a wide range of topics in ergonomic design including: ecological design; educational and game design; cultural and ethical aspects in design; user research and human–computer interaction in design; as well as design for accessibility and extreme environments, and many others. The book places special emphasis on new technologies such as virtual reality, state-of-the-art methodologies in information design, and human–computer interfaces. Based on the AHFE 2017 International Conference on Ergonomics in Design, held on July 17–21, 2017, in Los Angeles, California, USA, the book offers a timely guide for both researchers and design practitioners, including industrial designers, human–computer interaction and user experience researchers, production engineers and applied psychologists.
