Download or read book Adaptive Fuzzy Systems and Control written by Li-Xin Wang and published by Prentice Hall. This book was released on 1994 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume develops a variety of adaptive fuzzy systems and applies them to a variety of engineering problems. It summarizes the state-of-the-art methods for automatic tuning of the parameters and structures of fuzzy logic systems.
Download or read book Fuzzy Control and Identification written by John H. Lilly and published by John Wiley & Sons. This book was released on 2011-03-10 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an introduction to basic fuzzy logic and Mamdani and Takagi-Sugeno fuzzy systems. The text shows how these can be used to control complex nonlinear engineering systems, while also also suggesting several approaches to modeling of complex engineering systems with unknown models. Finally, fuzzy modeling and control methods are combined in the book, to create adaptive fuzzy controllers, ending with an example of an obstacle-avoidance controller for an autonomous vehicle using modus ponendo tollens logic.
Download or read book Fuzzy System Identification and Adaptive Control written by Ruiyun Qi and published by Springer. This book was released on 2020-06-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a systematic and unified framework for identification and adaptive control of Takagi–Sugeno (T–S) fuzzy systems. Its design techniques help readers applying these powerful tools to solve challenging nonlinear control problems. The book embodies a systematic study of fuzzy system identification and control problems, using T–S fuzzy system tools for both function approximation and feedback control of nonlinear systems. Alongside this framework, the book also: introduces basic concepts of fuzzy sets, logic and inference system; discusses important properties of T–S fuzzy systems; develops offline and online identification algorithms for T–S fuzzy systems; investigates the various controller structures and corresponding design conditions for adaptive control of continuous-time T–S fuzzy systems; develops adaptive control algorithms for discrete-time input–output form T–S fuzzy systems with much relaxed design conditions, and discrete-time state-space T–S fuzzy systems; and designs stable parameter-adaptation algorithms for both linearly and nonlinearly parameterized T–S fuzzy systems. The authors address adaptive fault compensation problems for T–S fuzzy systems subject to actuator faults. They cover a broad spectrum of related technical topics and to develop a substantial set of adaptive nonlinear system control tools. Fuzzy System Identification and Adaptive Control helps engineers in the mechanical, electrical and aerospace fields, to solve complex control design problems. The book can be used as a reference for researchers and academics in nonlinear, intelligent, adaptive and fault-tolerant control.
Download or read book An Introduction to Fuzzy Control written by Dimiter Driankov and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy controllers are a class of knowledge based controllers using artificial intelligence techniques with origins in fuzzy logic to compute an appropriate control action. These fuzzy knowledge based controllers can be found either as stand-alone control elements or as integral parts of distributed control systems including conventional controllers in a wide range of industrial process control systems and consumer products. Applications of fuzzy controllers have become a well established practice for Japanese manufacturers of control equipment and systems, and are becoming more and more common for their European and American counterparts. The main aim of this book is to show that fuzzy control is not totally ad hoc, that there exist formal techniques for the analysis of a fuzzy controller, and that fuzzy control can be implemented even when no expert knowledge is available. Thus the book is mainly oriented toward control engineers and theorists rather than fuzzy and non-fuzzy AI people. However, parts can be read without any knowledge of control theory and may be of interest to AI people. The book has six chapters. Chapter 1 introduces two major classes of knowledge based systems for closedloop control. Chapter 2 introduces relevant parts of fuzzy set theory and fuzzy logic. Chapter 3 introduces the principal design parameters of a fuzzy knowledge based controller (FKBC) and discusses their relevance with respect to its performance. Chapter 4 considers an FKBC as a particular type of nonlinear controller. Chapter 5 considers tuning and adaptation of FKBCs, which are nonlinear and so can be designed to cope with a certain amount of nonlinearity. Chapter 6 considers several approaches for stability analysis of FKBCs in the context of classical nonlinear dynamic systems theory.
Download or read book Advances in Fuzzy Control written by Dimiter Driankov and published by Physica. This book was released on 2013-04-17 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model-based fuzzy control uses a given conventional or a fuzzy open loop of the plant under control in order to derive the set of fuzzy if-then rules constituting the corresponding fuzzy controller. Furthermore, of central interest are the consequent stability, performance, and robustness analysis of the resulting closed loop system involving a conventional model and a fuzzy controller, or a fuzzy model and a fuzzy controller. The major objective of the model-based fuzzy control is to use the full available range of existing linear and nonlinear design of such fuzzy controllers which have better stability, performance, and robustness properties than the corresponding non-fuzzy controllers designed by the use of these same techniques.
Download or read book Modern Adaptive Fuzzy Control Systems written by Ardashir Mohammadzadeh and published by Springer Nature. This book was released on 2022-11-02 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the basic concepts, theory and applications of fuzzy systems in control in a simple unified approach with clear ex-amples and simulations in the MATLAB programming language. Fuzzy systems, especially, type-2 neuro-fuzzy systems, are now used extensively in various engineering fields for different purposes. In plain language, this book aims to practically explain fuzzy sys-tems and different methods of training and optimizing these systems. For this purpose, type-2 neuro-fuzzy systems are first analyzed along with various methods of training and optimizing these systems through implementation in MATLAB. These systems are then em-ployed to design adaptive fuzzy controllers. The authors aim at pre-senting all the well-known optimization methods clearly and code them in the MATLAB language.
Download or read book Future Directions of Fuzzy Theory and Systems written by Yeung Yam and published by World Scientific. This book was released on 1995 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph includes expanded selected papers presented in the ?Workshop on the Future Directions of Fuzzy Theory and Systems?. It contains many recent developments in the field and provides valuable insights into the future direction and applications of fuzzy theory and systems.
Download or read book Fuzzy Controller Design written by Zdenko Kovacic and published by CRC Press. This book was released on 2018-10-08 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy control methods are critical for meeting the demands of complex nonlinear systems. They bestow robust, adaptive, and self-correcting character to complex systems that demand high stability and functionality beyond the capabilities of traditional methods. A thorough treatise on the theory of fuzzy logic control is out of place on the design bench. That is why Fuzzy Controller Design: Theory and Applications offers laboratory- and industry-tested algorithms, techniques, and formulations of real-world problems for immediate implementation. With surgical precision, the authors carefully select the fundamental elements of fuzzy logic control theory necessary to formulate effective and efficient designs. The book supplies a springboard of knowledge, punctuated with examples worked out in MATLAB®/SIMULINK®, from which newcomers to the field can dive directly into applications. It systematically covers the design of hybrid, adaptive, and self-learning fuzzy control structures along with strategies for fuzzy controller design suitable for on-line and off-line operation. Examples occupy an entire chapter, with a section devoted to the simulation of an electro-hydraulic servo system. The final chapter explores industrial applications with emphasis on techniques for fuzzy controller implementation and different implementation platforms for various applications. With proven methods based on more than a decade of experience, Fuzzy Controller Design: Theory and Applications is a concise guide to the methodology, design steps, and formulations for effective control solutions.
Download or read book Fuzzy Control written by Kevin M. Passino and published by Prentice Hall. This book was released on 1998 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction; Fuzzy control: the basics; Case studies in design and implementation; nonlinear analysis; Fuzzy identification and estimation; Adaptive fuzzy control; Fuzzy supervisory control; Perspectives on fuzzy control.
Download or read book Analysis and Synthesis of Fuzzy Control Systems written by Gang Feng and published by CRC Press. This book was released on 2018-09-03 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy logic control (FLC) has proven to be a popular control methodology for many complex systems in industry, and is often used with great success as an alternative to conventional control techniques. However, because it is fundamentally model free, conventional FLC suffers from a lack of tools for systematic stability analysis and controller design. To address this problem, many model-based fuzzy control approaches have been developed, with the fuzzy dynamic model or the Takagi and Sugeno (T–S) fuzzy model-based approaches receiving the greatest attention. Analysis and Synthesis of Fuzzy Control Systems: A Model-Based Approach offers a unique reference devoted to the systematic analysis and synthesis of model-based fuzzy control systems. After giving a brief review of the varieties of FLC, including the T–S fuzzy model-based control, it fully explains the fundamental concepts of fuzzy sets, fuzzy logic, and fuzzy systems. This enables the book to be self-contained and provides a basis for later chapters, which cover: T–S fuzzy modeling and identification via nonlinear models or data Stability analysis of T–S fuzzy systems Stabilization controller synthesis as well as robust H∞ and observer and output feedback controller synthesis Robust controller synthesis of uncertain T–S fuzzy systems Time-delay T–S fuzzy systems Fuzzy model predictive control Robust fuzzy filtering Adaptive control of T–S fuzzy systems A reference for scientists and engineers in systems and control, the book also serves the needs of graduate students exploring fuzzy logic control. It readily demonstrates that conventional control technology and fuzzy logic control can be elegantly combined and further developed so that disadvantages of conventional FLC can be avoided and the horizon of conventional control technology greatly extended. Many chapters feature application simulation examples and practical numerical examples based on MATLAB®.
Download or read book Methods and Applications of Intelligent Control written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with Intelligent Control methods and applications. The field of intelligent control has been expanded very much during the recent years and a solid body of theoretical and practical results are now available. These results have been obtained through the synergetic fusion of concepts and techniques from a variety of fields such as automatic control, systems science, computer science, neurophysiology and operational research. Intelligent control systems have to perform anthropomorphic tasks fully autonomously or interactively with the human under known or unknown and uncertain environmental conditions. Therefore the basic components of any intelligent control system include cognition, perception, learning, sensing, planning, numeric and symbolic processing, fault detection/repair, reaction, and control action. These components must be linked in a systematic, synergetic and efficient way. Predecessors of intelligent control are adaptive control, self-organizing control, and learning control which are well documented in the literature. Typical application examples of intelligent controls are intelligent robotic systems, intelligent manufacturing systems, intelligent medical systems, and intelligent space teleoperators. Intelligent controllers must employ both quantitative and qualitative information and must be able to cope with severe temporal and spatial variations, in addition to the fundamental task of achieving the desired transient and steady-state performance. Of course the level of intelligence required in each particular application is a matter of discussion between the designers and users. The current literature on intelligent control is increasing, but the information is still available in a sparse and disorganized way.
Download or read book Fuzzy Control Systems Design and Analysis written by Kazuo Tanaka and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of model-based fuzzy control systems This volume offers full coverage of the systematic framework for the stability and design of nonlinear fuzzy control systems. Building on the Takagi-Sugeno fuzzy model, authors Tanaka and Wang address a number of important issues in fuzzy control systems, including stability analysis, systematic design procedures, incorporation of performance specifications, numerical implementations, and practical applications. Issues that have not been fully treated in existing texts, such as stability analysis, systematic design, and performance analysis, are crucial to the validity and applicability of fuzzy control methodology. Fuzzy Control Systems Design and Analysis addresses these issues in the framework of parallel distributed compensation, a controller structure devised in accordance with the fuzzy model. This balanced treatment features an overview of fuzzy control, modeling, and stability analysis, as well as a section on the use of linear matrix inequalities (LMI) as an approach to fuzzy design and control. It also covers advanced topics in model-based fuzzy control systems, including modeling and control of chaotic systems. Later sections offer practical examples in the form of detailed theoretical and experimental studies of fuzzy control in robotic systems and a discussion of future directions in the field. Fuzzy Control Systems Design and Analysis offers an advanced treatment of fuzzy control that makes a useful reference for researchers and a reliable text for advanced graduate students in the field.
Download or read book Industrial Applications of Fuzzy Control written by Michio Sugeno and published by North Holland. This book was released on 1985 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the practical applications of fuzzy control, which is one of the most promising research fields in fuzzy engineering. Control engineers in many fields can benefit from these case studies, which include the control of trains, aircraft, robots, and various industrial processes. Also featured is a comprehensive ''Annotated Bibliography of Fuzzy Control''.
Download or read book Power System Load Frequency Control written by Hassan A. Yousef and published by CRC Press. This book was released on 2017-03-16 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title presents a balanced blend between classical and intelligent load frequency control techniques, which is detrminant for continous supply of power loads. The classical control techniques introduced in this book include PID, pole placement, observer-based state feedback, static and dynamic output feedback controllers while the intelligent control techniques explained here are of adaptive fuzzy control types. This book will analyze and design different decentralized LF controllers in order to maintain the frequency deviations of each power area within the limits and keep the tie-line power flow between different power areas at the scheduled levels.
Download or read book Modern Fuzzy Control Systems and Its Applications written by S. Ramakrishnan and published by BoD – Books on Demand. This book was released on 2017-08-30 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control systems play an important role in engineering. Fuzzy logic is the natural choice for designing control applications and is the most popular and appropriate for the control of home and industrial appliances. Academic and industrial experts are constantly researching and proposing innovative and effective fuzzy control systems. This book is an edited volume and has 21 innovative chapters arranged into five sections covering applications of fuzzy control systems in energy and power systems, navigation systems, imaging, and industrial engineering. Overall, this book provides a rich set of modern fuzzy control systems and their applications and will be a useful resource for the graduate students, researchers, and practicing engineers in the field of electrical engineering.
Download or read book Introduction to Fuzzy Sets Fuzzy Logic and Fuzzy Control Systems written by Guanrong Chen and published by CRC Press. This book was released on 2000-11-27 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the early 1970s, fuzzy systems and fuzzy control theories added a new dimension to control systems engineering. From its beginnings as mostly heuristic and somewhat ad hoc, more recent and rigorous approaches to fuzzy control theory have helped make it an integral part of modern control theory and produced many exciting results. Yesterday's "art
Download or read book Foundations of Fuzzy Control written by Jan Jantzen and published by John Wiley & Sons. This book was released on 2013-07-17 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foundations of Fuzzy Control: A Practical Approach, 2nd Edition has been significantly revised and updated, with two new chapters on Gain Scheduling Control and Neurofuzzy Modelling. It focuses on the PID (Proportional, Integral, Derivative) type controller which is the most widely used in industry and systematically analyses several fuzzy PID control systems and adaptive control mechanisms. This new edition covers the basics of fuzzy control and builds a solid foundation for the design of fuzzy controllers, by creating links to established linear and nonlinear control theory. Advanced topics are also introduced and in particular, common sense geometry is emphasised. Key features Sets out practical worked through problems, examples and case studies to illustrate each type of control system Accompanied by a website hosting downloadable MATLAB programs Accompanied by an online course on Fuzzy Control which is taught by the author. Students can access further material and enrol at the companion website Foundations of Fuzzy Control: A Practical Approach, 2nd Edition is an invaluable resource for researchers, practitioners, and students in engineering. It is especially relevant for engineers working with automatic control of mechanical, electrical, or chemical systems.
