Download or read book Adaptive Finite Volume Method for Flow Prediction Using Unstructured Meshes and Multigrid Approach written by Samir Muzaferija and published by . This book was released on 1994 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Finite Volume Method in Computational Fluid Dynamics written by F. Moukalled and published by Springer. This book was released on 2015-08-13 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explores both the theoretical foundation of the Finite Volume Method (FVM) and its applications in Computational Fluid Dynamics (CFD). Readers will discover a thorough explanation of the FVM numerics and algorithms used for the simulation of incompressible and compressible fluid flows, along with a detailed examination of the components needed for the development of a collocated unstructured pressure-based CFD solver. Two particular CFD codes are explored. The first is uFVM, a three-dimensional unstructured pressure-based finite volume academic CFD code, implemented within Matlab. The second is OpenFOAM®, an open source framework used in the development of a range of CFD programs for the simulation of industrial scale flow problems. With over 220 figures, numerous examples and more than one hundred exercise on FVM numerics, programming, and applications, this textbook is suitable for use in an introductory course on the FVM, in an advanced course on numerics, and as a reference for CFD programmers and researchers.
Download or read book Computational Methods for Fluid Dynamics written by Joel H. Ferziger and published by Springer. This book was released on 2019-08-16 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a guide to numerical methods for solving fluid dynamics problems. The most widely used discretization and solution methods, which are also found in most commercial CFD-programs, are described in detail. Some advanced topics, like moving grids, simulation of turbulence, computation of free-surface flows, multigrid methods and parallel computing, are also covered. Since CFD is a very broad field, we provide fundamental methods and ideas, with some illustrative examples, upon which more advanced techniques are built. Numerical accuracy and estimation of errors are important aspects and are discussed in many examples. Computer codes that include many of the methods described in the book can be obtained online. This 4th edition includes major revision of all chapters; some new methods are described and references to more recent publications with new approaches are included. Former Chapter 7 on solution of the Navier-Stokes equations has been split into two Chapters to allow for a more detailed description of several variants of the Fractional Step Method and a comparison with SIMPLE-like approaches. In Chapters 7 to 13, most examples have been replaced or recomputed, and hints regarding practical applications are made. Several new sections have been added, to cover, e.g., immersed-boundary methods, overset grids methods, fluid-structure interaction and conjugate heat transfer.
Download or read book Numerical Methods for Seakeeping Problems written by Bettar Ould el Moctar and published by Springer Nature. This book was released on 2021-01-19 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes currently applied and newly developed advanced numerical methods for wave-induced ship motions and loads. Besides well-established computational methods based on strip theory, panel methods and finite volume methods for unsteady Reynolds-averaged Navier-Stokes equations (URANS), recent advances like a fully nonlinear Rankine panel method, URANS calculations including elastic hull deformations, and an improved method to predict added resistance in waves are explained in detail. Furthermore, statistical methods to assess extreme motions and loads are described both for linear and nonlinear responses in a stationary seaway as well as during long-term ship operations. Results of motions and loads, computed using the various methods, are compared with each other and with results of model experiments. Introductory chapters on fluid dynamics, motions of rigid and elastic ship hulls, numerical methods to compute fluid flows associated with wind waves, and the development and simulation of seaways complement the volume. The book will be of interest to post-graduate students, PhD candidates, as well as engineers in the field of naval architecture, ocean, and marine engineering.
Download or read book Hyperbolic Partial Differential Equations written by Andreas Meister and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives an introduction to the fundamental properties of hyperbolic partial differential equations und their appearance in the mathematical modelling of various problems from practice. It shows in an unique manner concepts for the numerical treatment of such equations starting from basic algorithms up actual research topics in this area. The numerical methods discussed are central and upwind schemes for structured and unstructured grids based on ENO and WENO reconstructions, pressure correction schemes like SIMPLE and PISO as well as asymptotic-induced algorithms for low-Mach number flows.
Download or read book Advances In Numerical Heat Transfer written by W. Minkowycz and published by CRC Press. This book was released on 1996-11-01 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first volume in the series. It analyzes several fundamental methodology issues in numerical heat transfer and fluid flow and identifies certain areas of active application. The finite-volume approach is presented with the finite-element methods as well as with energy balance analysis. Applications include the latest development in turbulence modeling and current approaches to inverse problems.
Download or read book Advances of CFD in Fluid Machinery Design written by Robin Elder and published by John Wiley & Sons. This book was released on 2003-02-07 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past Computational Fluid Dynamics (CFD) was confined to large organisations capable of developing and supporting their own codes. But recently there has been a rapid increase in the availability of reasonably priced commercial codes, and many more industrial organisations are now able to routinely use CFD. Advances of CFD in Fluid Machinery Design provide the perfect opportunity to find out what industry is doing and this book addresses how CFD is now being increasingly used in the design process, rather than as a post-design analysis tool. COMPLETE CONTENTS Trends in industrial use of CFD Challenges and methodologies in the design of axial flow fans for high-bypass-ratio, gas turbine engines using steady and unsteady CFD A three-dimensional inverse method based on pressure loading for the design of turbomachinery blades Application of CFD to the design and analysis of axial and centrifugal fans and compressors The design and performance of a transonic flow deswirling system – an application of current CFD design techniques tested against model and full-scale experiments Recent developments in unsteady flow modelling for turbomachinery aeroelasticity Computational investigation of flow in casing treatments for stall delay in axial flow fans Use of CFD for the three-dimensional hydrodynamic design of vertical diffuser pumps Recommendations to designers for CFD pump impeller and diffuser simulations Three dimensional CFD – a possibility to analyse piston pump flow dynamics CFD analysis of screw compressor performance Prediction of aerothermal phenomena in high-speed discstator systems Use of CFD in the design of a shaft seal for high-performance turbomachinery Users and potential users, of CFD for the design of fluid machinery, managers, designers, and researchers working in the field of ‘industrial flows’, will all find Advances of CFD in Fluid Machinery Design a valuable volume discussing state-of-the-art developments in CFD.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical and Computational Methods for Compressible Flow written by Miloslav Feistauer and published by Oxford University Press, USA. This book was released on 2003 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with mathematical and numerical methods for compressible flow. It aims to provide the reader with a sufficiently detailed and extensive, mathematically precise, but comprehensible guide, through a wide spectrum of mathematical and computational methods used in Computational Fluid Dynamics (CFD) for the numerical simulation of compressible flow. Up-to-date techniques applied in the numerical solution of inviscid as well as viscous compressible flow on unstructured meshes are explained, thus allowing the simulation of complex three-dimensional technically relevant problems. Among some of the methods addressed are finite volume methods using approximate Riemann solvers, finite element techniques, such as the streamline diffusion and the discontinuous Galerkin methods, and combined finite volume - finite element schemes. The book gives a complex insight into the numerics of compressible flow, covering the development of numerical schemes and their theoretical mathematical analysis, their verification on test problems and use in solving practical engineering problems. The book will be helpful to specialists coming into contact with CFD - pure and applied mathematicians, aerodynamists, engineers, physicists and natural scientists. It will also be suitable for advanced undergraduate, graduate and postgraduate students of mathematics and technical sciences.
Download or read book Mesh Adaptation for Computational Fluid Dynamics Volume 2 written by Alain Dervieux and published by John Wiley & Sons. This book was released on 2022-09-21 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation technology, and computational fluid dynamics (CFD) in particular, is essential in the search for solutions to the modern challenges faced by humanity. Revolutions in CFD over the last decade include the use of unstructured meshes, permitting the modeling of any 3D geometry. New frontiers point to mesh adaptation, allowing not only seamless meshing (for the engineer) but also simulation certification for safer products and risk prediction. Mesh Adaptation for Computational Dynamics 2 is the second of two volumes and introduces topics including optimal control formulation, minimizing a goal function, and extending the steady algorithm to unsteady physics. Also covered are multi-rate strategies, steady inviscid flows in aeronautics and an extension to viscous flows. This book will be useful to anybody interested in mesh adaptation pertaining to CFD, especially researchers, teachers and students.
Download or read book Compressors and Their Systems written by IMechE (Institution of Mechanical Engineers) and published by John Wiley & Sons. This book was released on 2001-11-28 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the interactions from an international conference organized by the Fluid Machinery Group of the IMechE. The papers provide an up-to-date resume of compressors, refigeration, energy efficency, lubrication and sealing oils, and novel machines.
Download or read book Calculation of Complex Turbulent Flows written by George Tzabiras and published by Witpress. This book was released on 2000 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of invited chapters focusing on developments in the application of Computational Fluid Dynamics (CFD) to compressible or incompressible flows dominated by turbulence effects. These may be applied to complex geometrical configurations or flow-fields in simpler geometries requiring higher-order turbulence modelling, or suitably modified low-order models, to calculate crucial parameters such as instabilities, transition, separation, accurate description of velocity and scalar fields, and local and total forces.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress in Computational Flow Structure Interaction written by Werner Haase and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft design processes require extensive work in the area of both aerodynamics and structure, fonning an environment for aeroelasticity investigations. Present and future designs of European aircraft are characterized by an ever increasing aircraft size and perfonnance. Strong weight saving requirements are met by introduction of new materials, leading to more flexible structure of the aircraft. Consequently, aeroelastic phenomena such as vortex-induced aeroelastic oscillations and moving shock waves can be predominant and may have a significant effect on the aircraft perfonnance. Hence, the ability to estimate reliable margins for aeroelastic instabilities (flutter) or dynamic loads (buffeting) is a major concern to the aircraft designer. As modern aircrafts have wing bending modes with frequencies that are low enough to influence the flight control system, demands on unsteady aerodynamics and structural analysis to predict flight control effectiveness and riding comfort for passengers are extremely high. Therefore, the aircraft industries need an improved capacity of robust, accurate and reliable prediction methods in the coupled aeroelastic, flight mechanics and loads disciplines. In particular, it is necessary to develop/improve and calibrate the numerical tools in order to predict with high level of accuracy and capability complex and non-classical aeroelastic phenomena, including aerodynamic non-linearities, such as shock waves and separation, as well as structural non-linearities, e. g. control surface free-play. Nowadays, robust methods for structural analysis and linearised unsteady aerodynamics are coupled and used by the aircraft industry to computationally clear a new design from flutter.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Methods for Flows written by Harald van Brummelen and published by Springer Nature. This book was released on 2020-02-22 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes selected contributions on applied mathematics, numerical analysis, numerical simulation and scientific computing related to fluid mechanics problems, presented at the FEF-“Finite Element for Flows” conference, held in Rome in spring 2017. Written by leading international experts and covering state-of-the-art topics in numerical simulation for flows, it provides fascinating insights into and perspectives on current and future methodological and numerical developments in computational science. As such, the book is a valuable resource for researchers, as well as Masters and Ph.D students.
Download or read book Applied Computational Aerodynamics written by P. A. Henne and published by AIAA. This book was released on 1990 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt:
