Download or read book Adaptive Digital Circuits for Power Performance Range beyond Wide Voltage Scaling written by Saurabh Jain and published by Springer Nature. This book was released on 2020-02-27 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the first comprehensive coverage of digital design techniques to expand the power-performance tradeoff well beyond that allowed by conventional wide voltage scaling. Compared to conventional fixed designs, the approach described in this book makes digital circuits more versatile and adaptive, allowing simultaneous optimization at both ends of the power-performance spectrum. Drop-in solutions for fully automated and low-effort design based on commercial CAD tools are discussed extensively for processors, accelerators and on-chip memories, and are applicable to prominent applications (e.g., IoT, AI, wearables, biomedical). Through the higher power-performance versatility techniques described in this book, readers are enabled to reduce the design effort through reuse of the same digital design instance, across a wide range of applications. All concepts the authors discuss are demonstrated by dedicated testchip designs and experimental results. To make the results immediately usable by the reader, all the scripts necessary to create automated design flows based on commercial tools are provided and explained.
Download or read book Constructive Side Channel Analysis and Secure Design written by Shivam Bhasin and published by Springer Nature. This book was released on 2021-10-26 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised selected papers from the 11th International Workshop on Constructive Side-Channel Analysis and Secure Design, COSADE 2021, held in Lugano, Switzerland, in October 2021. The 14 full papers carefully reviewed and selected from 31 submissions are presented in this volume together with the 4 extended keynote abstracts. The workshop covers the following subjects: cryptography, side-channel analysis, cryptographic implementations, fault attacks, implementation attacks, post-quantum cryptography, hardware accelerators, etc.
Download or read book Power Management of Digital Circuits in Deep Sub Micron CMOS Technologies written by Stephan Henzler and published by Springer Science & Business Media. This book was released on 2006-11-24 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth overview of design and implementation of leakage reduction techniques. The focus is on applicability, technology dependencies, and scalability. The book mainly deals with circuit design but also addresses the interface between circuit and system level design on the one side and between circuit and physical design on the other side.
Download or read book Proceedings of the International Symposium on Power Semiconductor Devices and ICs written by and published by . This book was released on 2004 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Enabling the Internet of Things written by Massimo Alioto and published by Springer. This book was released on 2017-01-23 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the first comprehensive view on integrated circuit and system design for the Internet of Things (IoT), and in particular for the tiny nodes at its edge. The authors provide a fresh perspective on how the IoT will evolve based on recent and foreseeable trends in the semiconductor industry, highlighting the key challenges, as well as the opportunities for circuit and system innovation to address them. This book describes what the IoT really means from the design point of view, and how the constraints imposed by applications translate into integrated circuit requirements and design guidelines. Chapter contributions equally come from industry and academia. After providing a system perspective on IoT nodes, this book focuses on state-of-the-art design techniques for IoT applications, encompassing the fundamental sub-systems encountered in Systems on Chip for IoT: ultra-low power digital architectures and circuits low- and zero-leakage memories (including emerging technologies) circuits for hardware security and authentication System on Chip design methodologies on-chip power management and energy harvesting ultra-low power analog interfaces and analog-digital conversion short-range radios miniaturized battery technologies packaging and assembly of IoT integrated systems (on silicon and non-silicon substrates). As a common thread, all chapters conclude with a prospective view on the foreseeable evolution of the related technologies for IoT. The concepts developed throughout the book are exemplified by two IoT node system demonstrations from industry. The unique balance between breadth and depth of this book: enables expert readers quickly to develop an understanding of the specific challenges and state-of-the-art solutions for IoT, as well as their evolution in the foreseeable future provides non-experts with a comprehensive introduction to integrated circuit design for IoT, and serves as an excellent starting point for further learning, thanks to the broad coverage of topics and selected references makes it very well suited for practicing engineers and scientists working in the hardware and chip design for IoT, and as textbook for senior undergraduate, graduate and postgraduate students ( familiar with analog and digital circuits).
Download or read book ISPSD 04 written by and published by . This book was released on 2004 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Power VLSI Circuits and Systems written by Ajit Pal and published by Springer. This book was released on 2014-11-17 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a comprehensive coverage of different aspects of low power circuit synthesis at various levels of design hierarchy; starting from the layout level to the system level. For a seamless understanding of the subject, basics of MOS circuits has been introduced at transistor, gate and circuit level; followed by various low-power design methodologies, such as supply voltage scaling, switched capacitance minimization techniques and leakage power minimization approaches. The content of this book will prove useful to students, researchers, as well as practicing engineers.
Download or read book Nanosystems Design and Technology written by Giovanni DeMicheli and published by Springer Science & Business Media. This book was released on 2009-09-01 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanosystems use new, nanoscopic electrical and/or mechanical devices which, as constituents of electronic and electromechanical systems, find application primarily in computing, embedded control and biomedical data acquisition. In particular, this book will deal with the characterization and patterning of these materials from an engineering perspective, with the objective of creating operational prototypes and products. The book will integrate various nano technologies on materials, devices and systems and identify key areas and results. The book will describe different design aspects for integrated systems on silicon, as well as on heterogeneous platforms including, but not limited to, electrical, optical, micromechanical and biological components in various forms and mixtures. By associating research topics from differing horizons, the book will provide a unique opportunity to bridge the gap between electronics/electrical engineering and materials science. The book will include topics at the intersection of these disciplines, and will interface with computer science, biology and medicine.
Download or read book Dual Mode Logic written by Itamar Levi and published by Springer Nature. This book was released on 2020-12-15 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents Dual Mode Logic (DML), a new design paradigm for digital integrated circuits. DML logic gates can operate in two modes, each optimized for a different metric. Its on-the-fly switching between these operational modes at the gate, block and system levels provide maximal E-D optimization flexibility. Each highly detailed chapter has multiple illustrations showing how the DML paradigm seamlessly implements digital circuits that dissipate less energy while simultaneously improving performance and reducing area without a significant compromise in reliability. All the facets of the DML methodology are covered, starting from basic concepts, through single gate optimization, general module optimization, design trade-offs and new ways DML can be integrated into standard design flows using standard EDA tools. DML logic is compatible with numerous applications but is particularly advantageous for ultra-low power, reliable high performance systems, and advanced scaled technologies Written in language accessible to students and design engineers, each topic is oriented toward immediate application by all those interested in an alternative to CMOS logic. Describes a novel, promising alternative to conventional CMOS logic, known as Dual Mode Logic (DML), with which a single gate can be operated selectively in two modes, each optimized for a different metric (e.g., energy consumption, performance, size); Demonstrates several techniques at the architectural level, which can result in high energy savings and improved system performance; Focuses on the tradeoffs between power, area and speed including optimizations at the transistor and gate level, including alternatives to DML basic cells; Illustrates DML efficiency for a variety of VLSI applications.
Download or read book Low Power CMOS Wireless Communications written by Samuel Sheng and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-Power CMOS Wireless Communications: A Wideband CDMA System Design focuses on the issues behind the development of a high-bandwidth, silicon complementary metal-oxide silicon (CMOS) low-power transceiver system for mobile RF wireless data communications. In the design of any RF communications system, three distinct factors must be considered: the propagation environment in question, the multiplexing and modulation of user data streams, and the complexity of hardware required to implement the desired link. None of these can be allowed to dominate. Coupling between system design and implementation is the key to simultaneously achieving high bandwidth and low power and is emphasized throughout the book. The material presented in Low-Power CMOS Wireless Communications: A Wideband CDMA System Design is the result of broadband wireless systems research done at the University of California, Berkeley. The wireless development was motivated by a much larger collaborative effort known as the Infopad Project, which was centered on developing a mobile information terminal for multimedia content - a wireless `network computer'. The desire for mobility, combined with the need to support potentially hundreds of users simultaneously accessing full-motion digital video, demanded a wireless solution that was of far lower power and higher data rate than could be provided by existing systems. That solution is the topic of this book: a case study of not only wireless systems designs, but also the implementation of such a link, down to the analog and digital circuit level.
Download or read book Low Power Methodology Manual written by David Flynn and published by Springer Science & Business Media. This book was released on 2007-07-31 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a practical guide for engineers doing low power System-on-Chip (SoC) designs. It covers various aspects of low power design from architectural issues and design techniques to circuit design of power gating switches. In addition to providing a theoretical basis for these techniques, the book addresses the practical issues of implementing them in today's designs with today's tools.
Download or read book Model and Design of Bipolar and MOS Current Mode Logic written by Massimo Alioto and published by Springer Science & Business Media. This book was released on 2005-10-21 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main focus of this book is to provide the reader with a deep understanding of modeling and design strategies of Current-Mode digital circuits, as well as to organize in a coherent manner all the original and powerful authors’ results in the domain of Current-Mode digital circuits. Model and Design of Bipolar and MOS Current-Mode Logic includes bipolar Current-Mode digital circuits, which emerged as an approach to realize digital circuits with the highest speed, and CMOS Current-Mode digital circuits, which together with its speed performance has been rediscovered to allow logic gates implementations having the feature of low noise level generation. Model and Design of Bipolar and MOS Current-Mode Logic allows the reader not only to understand the operating principle and the features of bipolar and MOS Current-Mode digital circuits, but also to design optimized digital gates. And, although the material is presented in a formal and theoretical manner, much emphasis is devoted to a design perspective. Moreover, to further link the book’s theoretical aspects with practical issues, and to provide the reader with an idea of the real order of magnitude involved assuming actual technologies, numerical examples together with SPICE simulations are included in the book. Model and Design of Bipolar and MOS Current-Mode Logic can be used as a reference to practicing engineers working in this area and as text book to senior undergraduate, graduate and postgraduate students (already familiar with electronic circuits and logic gates) who want to extend their knowledge and cover all aspects of the analysis and design of Current-Mode digital circuits.
Download or read book Sub threshold Design for Ultra Low Power Systems written by Alice Wang and published by Springer Science & Business Media. This book was released on 2006-12-11 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the work of MIT graduate students Alice Wang and Benton Calhoun, this book surveys the field of sub-threshold and low-voltage design and explores such aspects of sub-threshold circuit design as modeling, logic and memory circuit design. One important chapter of the book is dedicated to optimizing energy dissipation - a key metric for energy constrained designs. This book also includes invited chapters on the subject of analog sub-threshold circuits.
Download or read book Flip Flop Design in Nanometer CMOS written by Massimo Alioto and published by Springer. This book was released on 2014-10-14 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a unified treatment of Flip-Flop design and selection in nanometer CMOS VLSI systems. The design aspects related to the energy-delay tradeoff in Flip-Flops are discussed, including their energy-optimal selection according to the targeted application, and the detailed circuit design in nanometer CMOS VLSI systems. Design strategies are derived in a coherent framework that includes explicitly nanometer effects, including leakage, layout parasitics and process/voltage/temperature variations, as main advances over the existing body of work in the field. The related design tradeoffs are explored in a wide range of applications and the related energy-performance targets. A wide range of existing and recently proposed Flip-Flop topologies are discussed. Theoretical foundations are provided to set the stage for the derivation of design guidelines, and emphasis is given on practical aspects and consequences of the presented results. Analytical models and derivations are introduced when needed to gain an insight into the inter-dependence of design parameters under practical constraints. This book serves as a valuable reference for practicing engineers working in the VLSI design area, and as text book for senior undergraduate, graduate and postgraduate students (already familiar with digital circuits and timing).
Download or read book CMOS written by R. Jacob Baker and published by John Wiley & Sons. This book was released on 2008 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition provides an important contemporary view of a wide range of analog/digital circuit blocks, the BSIM model, data converter architectures, and more. The authors develop design techniques for both long- and short-channel CMOS technologies and then compare the two.
Download or read book Low Power Digital CMOS Design written by Anantha P. Chandrakasan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power consumption has become a major design consideration for battery-operated, portable systems as well as high-performance, desktop systems. Strict limitations on power dissipation must be met by the designer while still meeting ever higher computational requirements. A comprehensive approach is thus required at all levels of system design, ranging from algorithms and architectures to the logic styles and the underlying technology. Potentially one of the most important techniques involves combining architecture optimization with voltage scaling, allowing a trade-off between silicon area and low-power operation. Architectural optimization enables supply voltages of the order of 1 V using standard CMOS technology. Several techniques can also be used to minimize the switched capacitance, including representation, optimizing signal correlations, minimizing spurious transitions, optimizing sequencing of operations, activity-driven power down, etc. The high- efficiency of DC-DC converter circuitry required for efficient, low-voltage and low-current level operation is described by Stratakos, Sullivan and Sanders. The application of various low-power techniques to a chip set for multimedia applications shows that orders-of-magnitude reduction in power consumption is possible. The book also features an analysis by Professor Meindl of the fundamental limits of power consumption achievable at all levels of the design hierarchy. Svensson, of ISI, describes emerging adiabatic switching techniques that can break the CV2f barrier and reduce the energy per computation at a fixed voltage. Srivastava, of AT&T, presents the application of aggressive shut-down techniques to microprocessor applications.
Download or read book Computer Architecture Techniques for Power efficiency written by Stefanos Kaxiras and published by Morgan & Claypool Publishers. This book was released on 2008 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few years, power dissipation has become an important design constraint, on par with performance, in the design of new computer systems. Whereas in the past, the primary job of the computer architect was to translate improvements in operating frequency and transistor count into performance, now power efficiency must be taken into account at every step of the design process. While for some time, architects have been successful in delivering 40% to 50% annual improvement in processor performance, costs that were previously brushed aside eventually caught up. The most critical of these costs is the inexorable increase in power dissipation and power density in processors. Power dissipation issues have catalyzed new topic areas in computer architecture, resulting in a substantial body of work on more power-efficient architectures. Power dissipation coupled with diminishing performance gains, was also the main cause for the switch from single-core to multi-core architectures and a slowdown in frequency increase. This book aims to document some of the most important architectural techniques that were invented, proposed, and applied to reduce both dynamic power and static power dissipation in processors and memory hierarchies. A significant number of techniques have been proposed for a wide range of situations and this book synthesizes those techniques by focusing on their common characteristics.
