Download or read book Active Power Decoupling Technology in Single Phase Current Source Converters written by Yonglu Liu and published by Springer Nature. This book was released on 2023-01-29 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive and in-depth introduction to the development of active power decoupling technology in single-phase current-source converters. It covers cutting-edge topics such as virtual-impedance control and harmonic state-space modeling and presents topology construction principles, specific decoupling topologies, advanced decoupling controls, and stability analysis. This book will be an invaluable tool for researchers, engineers, and designers in the field of power electronics involved in designing power converters with high power density and reliability.
Download or read book Second Harmonic Current Reduction Techniques for Single Phase Power Electronics Converter Systems written by Xinbo Ruan and published by Springer Nature. This book was released on 2022-05-24 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two-stage single-phase converters, including two-stage single-phase dc-ac inverters and two-stage single-phase PFC converters, are interfacing power converters between dc and ac voltage/current sources, which have been widely applied for dc-ac and ac-dc power conversion. For the two-stage single-phase converter, the ac-side power pulsates at twice the ac voltage frequency, resulting in second harmonic current (SHC) which might flow into the dc-dc converter, the dc voltage source, and dc load. This book clarifies the generation, propagation, and side-effects of this SHC and proposes the SHC reduction control schemes for the dc-dc converter, with different topologies and/or different operating modes, in the single-phase converter. On this basis, the second harmonic current compensator (SHCC) is proposed to compensate the SHC, significantly reducing the dc bus capacitance. In doing so, the electrolytic capacitors, with short lifetimes, are removed from the two-stage single-phase converter, leading to extended system lifetime and enhanced system stability. For having flawless SHC compensation performance, the port-current control schemes are proposed for the SHCC. Additionally, the stability analysis is carried out for the two-stage single-phase converter with the addition of SHCC. This book is a monograph combining theoretical analysis and engineering design, which could not only be a reference book for master students, Ph.D. students, and teachers majoring in power electronics but also be a handbook for the electrical engineers working on the research and development of LED drivers, EV on-board chargers, railway auxiliary power supplies, aviation power supplies, renewable energy generation systems, etc.
Download or read book Handbook Of Renewable Energy Technology Systems written by Ramesh C Bansal and published by World Scientific. This book was released on 2021-08-13 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Worldwide, the effects of global warming, pollution due to power generation from fossil fuels, and its depletion have led to the rapid deployment of renewable energy-based power generation. The leading renewable technologies are wind and photovoltaic (PV) systems. The incorporation of this generation of technologies has led to the development of a broad array of new methods and tools to integrate renewable generation into power system networks.The Handbook of Renewable Energy Technology & Systems comprises 22 chapters, arranged into four sections, which present a comprehensive analysis of various renewable energy-based distributed generation (DG) technologies. Aspects of renewable energy covered include wind and photovoltaic power systems and technology, micro-grids, power electronic applications, power quality, and the protection of renewable distributed generation.
Download or read book Soft Switching Technology for Three phase Power Electronics Converters written by Dehong Xu and published by John Wiley & Sons. This book was released on 2021-12-09 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft-Switching Technology for Three-phase Power Electronics Converters Discover foundational and advanced topics in soft-switching technology, including ZVS three-phase conversion In Soft-Switching Technology for Three-phase Power Electronics Converters, an expert team of researchers delivers a comprehensive exploration of soft-switching three-phase converters for applications including renewable energy and distribution power systems, AC power sources, UPS, motor drives, battery chargers, and more. The authors begin with an introduction to the fundamentals of the technology, providing the basic knowledge necessary for readers to understand the following articles. The book goes on to discuss three-phase rectifiers and three-phase grid inverters. It offers prototypes and experiments of each type of technology. Finally, the authors describe the impact of silicon carbide devices on soft-switching three-phase converters, studying the improvement in efficiency and power density created via the introduction of silicon carbide devices. Throughout, the authors put a special focus on a family of zero-voltage switching (ZVS) three-phase converters and related pulse width modulation (PWM) schemes. The book also includes: A thorough introduction to soft-switching techniques, including the classification of soft-switching for three phase converter topologies, soft-switching types and a generic soft-switching pulse-width-modulation known as Edge-Aligned PWM A comprehensive exploration of classical soft-switching three-phase converters, including the switching of power semiconductor devices and DC and AC side resonance Practical discussions of ZVS space vector modulation for three-phase converters, including the three-phase converter commutation process In-depth examinations of three-phase rectifiers with compound active clamping circuits Perfect for researchers, scientists, professional engineers, and undergraduate and graduate students studying or working in power electronics, Soft-Switching Technology for Three-phase Power Electronics Converters is also a must-read resource for research and development engineers involved with the design and development of power electronics.
Download or read book Impedance Source Inverters written by Hongpeng Liu and published by Springer Nature. This book was released on 2020-01-13 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on impedance source inverters, discussing their classification, advantages, topologies, analysis methods, working mechanisms, improvements, reliability, and applications. It summarizes methods for suppressing DC-link voltage spikes and duty loss, which can pose a problem for researchers; and presents novel, efficient, steady state and transient analysis methods that are of significant practical value, along with specific calculation examples. Further, the book addresses the reliability of impedance source inverters, adopting a methodology from reliability engineering to do so. Given its scope, it offers a valuable resource for researchers, engineers, and graduate students in fields involving impedance source inverters and new energy sources.
Download or read book Innovative and Intelligent Technology Based Services For Smart Environments Smart Sensing and Artificial Intelligence written by Sami Ben Slama and published by CRC Press. This book was released on 2021-06-28 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a collection of high-quality papers describing the results of relevant investigations and cutting-edge technologies, aimed at improving key aspects of real life, including major challenges such as the development of smart cities, smart buildings, smart grids, and the reduction of the impact of human activities on the environment. Sustainability requires the use of green technologies and techniques and good practices. Artificial intelligence seems to be an appropriate approach to optimize the use of resources. The main focus of this book is the dissemination of novel and innovative technologies, techniques and applications of artificial intelligence, computing and information and communications technologies, and new digital services such as digital marketing, smart tourism, smart agriculture, green and renewable energy sources. Besides, this book focuses on nurturing energy trends including renewable energies, smart grids, human activity impact, communication, behaviour, and social development, and quality of life improvement fields based on the innovative use of sensors, big data and the Internet of things (IoT), telecommunications and machine learning.
Download or read book Advances in Communication Devices and Networking written by Sourav Dhar and published by Springer Nature. This book was released on 2023-07-07 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent trends in the field of devices, wireless communication and networking. It gathers selected papers presented at the 6th International Conference on Communication, Devices and Networking (ICCDN 2022), which was organized by the Department of Electronics and Communication Engineering, Sikkim Manipal Institute of Technology, Sikkim, India, on December 16–17, 2022. Gathering cutting-edge research papers prepared by researchers, engineers and industry professionals, it helps young and experienced scientists and developers alike to explore new perspectives and offer them inspirations on how to address real-world problems in the areas of electronics, communication, devices and networking.
Download or read book Proceedings of Seventh International Congress on Information and Communication Technology written by Xin-She Yang and published by Springer Nature. This book was released on 2022-08-16 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected high-quality research papers presented at the Seventh International Congress on Information and Communication Technology, held at Brunel University, London, on February 21–24, 2022. It discusses emerging topics pertaining to information and communication technology (ICT) for managerial applications, e-governance, e-agriculture, e-education and computing technologies, the Internet of Things (IoT) and e-mining. Written by respected experts and researchers working on ICT, the book offers a valuable asset for young researchers involved in advanced studies. The work is presented in four volumes.
Download or read book Resonant type Architectures for Active Power Decoupling in Grid tied Single phase Power Electronics written by Nathan C. Brooks and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of Symposium on Power Electronic and Renewable Energy Systems Control written by Sankarsan Mohapatro and published by Springer Nature. This book was released on 2021-07-09 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes high-quality research papers presented at Symposium on Power Electronic and Renewable Energy Systems Control (PERESC 2020), which is held at the School of Electrical Sciences, IIT Bhubaneswar, Odisha, India, during 4–5 December 2020. The book covers original work in power electronics which has greatly enabled integration of renewable and distributed energy systems, control of electric machine drives, high voltage system control and operation. The book is highly useful for academicians, engineers, researchers and students to be familiar with the latest state of the art in power electronics technology and its applications.
Download or read book Integration of Renewable Energy Sources with Smart Grid written by M. Kathiresh and published by John Wiley & Sons. This book was released on 2021-08-16 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: INTEGRATION OF RENEWABLE ENERGY SOURCES WITH SMART GRID Provides comprehensive coverage of renewable energy and its integration with smart grid technologies. This book starts with an overview of renewable energy technologies, smart grid technologies, and energy storage systems and covers the details of renewable energy integration with smart grid and the corresponding controls. It also provides an enhanced perspective on the power scenario in developing countries. The requirement of the integration of smart grid along with the energy storage systems is deeply discussed to acknowledge the importance of sustainable development of a smart city. The methodologies are made quite possible with highly efficient power convertor topologies and intelligent control schemes. These control schemes are capable of providing better control with the help of machine intelligence techniques and artificial intelligence. The book also addresses modern power convertor topologies and the corresponding control schemes for renewable energy integration with smart grid. The design and analysis of power converters that are used for the grid integration of solar PV along with simulation and experimental results are illustrated. The protection aspects of the microgrid with power electronic configurations for wind energy systems are elucidated. The book also discusses the challenges and mitigation measure in renewable energy integration with smart grid. Audience The core audience is hardware and software engineers working on renewable energy integration related projects, microgrids, smart grids and computing algorithms for converter and inverter circuits. Researchers and students in electrical, electronics and computer engineering will also benefit reading the book.
Download or read book Design and Implementation of Voltage Source Converters in HVDC Systems written by Nagwa F. Ibrahim and published by Springer Nature. This book was released on 2020-09-12 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book looks at the control of voltage source converter based high voltage direct current (VSC-HVDC). The objective is to understand the control structure of the VSC-HVDC system and establish the tuning criteria for the proportional-integral (PI) control of the converter controllers. Coverage includes modeling of the VSC-based HVDC transmission system using MATLAB and Simulink simulation package; implementation of control strategies for the VSC-based HVDC transmission system; and analysis of the developed system behavior under different conditions (normal and fault conditions). The book provides researchers, students, and engineers working in electrical power system transmission and power electronics and control in power transmission with a good understanding of the VSC-based HVDC transmission system concept and its behavior.
Download or read book Electrical Generation and Distribution Systems and Power Quality Disturbances written by Gregorio Romero and published by BoD – Books on Demand. This book was released on 2011-11-21 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilization of renewable energy sources such as wind energy, or solar energy, among others, is currently of greater interest. Nevertheless, since their availability is arbitrary and unstable this can lead to frequency variation, to grid instability and to a total or partial loss of load power supply, being not appropriate sources to be directly connected to the main utility grid. Additionally, the presence of a static converter as output interface of the generating plants introduces voltage and current harmonics into the electrical system that negatively affect system power quality. By integrating distributed power generation systems closed to the loads in the electric grid, we can eliminate the need to transfer energy over long distances through the electric grid. In this book the reader will be introduced to different power generation and distribution systems with an analysis of some types of existing disturbances and a study of different industrial applications such as battery charges.
Download or read book Integration of Large Scale Wind Energy with Electrical Power Systems in China written by Zongxiang Lu and published by John Wiley & Sons. This book was released on 2018-03-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth examination of large scale wind projects and electricity production in China Presents the challenges of electrical power system planning, design, operation and control carried out by large scale wind power, from the Chinese perspective Focuses on the integration issue of large scale wind power to the bulk power system, probing the interaction between wind power and bulk power systems Wind power development is a burgeoning area of study in developing countries, with much interest in offshore wind farms and several big projects under development English translation of the Chinese language original which won the "Fourth China Outstanding Publication Award nomination" in March 2013
Download or read book Automatic Manufacturing Systems II written by Run Hua Tan and published by Trans Tech Publications Ltd. This book was released on 2012-06-14 with total page 1560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This work on the topic of automatic manufacturing systems consists of 302 peer-reviewed papers. The papers are grouped into ten chapters: Virtual Manufacturing and Sustainable Manufacturing; Digital Manufacture and Quality Monitoring; Systems Analysis and Industrial Engineering; Supply Chain and E-Commerce Systems; Computer-Aided Manufacturing Engineering; Mechatronics; Transmission and Control of Fluid; Mechanical Control and Information Processing Technology; Micro-Electronic Packaging Technology and Equipment; Computer Application Technology.
Download or read book Advanced Control of Electrical Drives and Power Electronic Converters written by Jacek Kabziński and published by Springer. This book was released on 2016-09-30 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume is written by key specialists working in multidisciplinary fields in electrical engineering, linking control theory, power electronics, artificial neural networks, embedded controllers and signal processing. The authors of each chapter report the state of the art of the various topics addressed and present results of their own research, laboratory experiments and successful applications. The presented solutions concentrate on three main areas of interest: · motion control in complex electromechanical systems, including sensorless control; · fault diagnosis and fault tolerant control of electric drives; · new control algorithms for power electronics converters. The chapters and the complete book possess strong monograph attributes. Important practical and theoretical problems are deeply and accurately presented on the background of an exhaustive state-of the art review. Many results are completely new and were never published before. Well-known control methods like field oriented control (FOC) or direct torque control (DTC) are referred as a starting point for modifications or are used for comparison. Among numerous control theories used to solve particular problems are: nonlinear control, robust control, adaptive control, Lyapunov techniques, observer design, model predictive control, neural control, sliding mode control, signal filtration and processing, fault diagnosis, and fault tolerant control.
Download or read book Impedance Source Power Electronic Converters written by Yushan Liu and published by John Wiley & Sons. This book was released on 2016-08-22 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Impedance Source Power Electronic Converters brings together state of the art knowledge and cutting edge techniques in various stages of research related to the ever more popular impedance source converters/inverters. Significant research efforts are underway to develop commercially viable and technically feasible, efficient and reliable power converters for renewable energy, electric transportation and for various industrial applications. This book provides a detailed understanding of the concepts, designs, controls, and application demonstrations of the impedance source converters/inverters. Key features: Comprehensive analysis of the impedance source converter/inverter topologies, including typical topologies and derived topologies. Fully explains the design and control techniques of impedance source converters/inverters, including hardware design and control parameter design for corresponding control methods. Presents the latest power conversion solutions that aim to advance the role of power electronics into industries and sustainable energy conversion systems. Compares impedance source converter/inverter applications in renewable energy power generation and electric vehicles as well as different industrial applications. Provides an overview of existing challenges, solutions and future trends. Supported by calculation examples, simulation models and results. Highly accessible, this is an invaluable resource for researchers, postgraduate/graduate students studying power electronics and its application in industry and renewable energy conversion as well as practising R&D engineers. Readers will be able to apply the presented material for the future design of the next generation of efficient power electronic converters/inverters.
